Status of Activity Reporting in 7.31

Hi All,
I was trying to configure Portal activity reports.
How to set properties First and Last Times Activity Data was Aggregated:
Thanks,
Prasad.

Hi Prasad,
Did you restart the service after configuring Portal Activity Report.
Coming to your question, please go through the below wiki which states that you cannot change the aggregation dates manually through service configuration.
FAQ’s - Portal Activity Report Functionality - Portal - SCN Wiki
BR,
Anurag

Similar Messages

  • Activity Report iView

    Hello all,
    I have a question regarding Activity Report iView. We are using two portals. The support package level is SPS11 patch 6. The activity Report iView only works on one of the portals correctly. The data are displayed well. But the same iView on the other portal doesn't display any data. The message appears like: No data available for the chosen period.
    I made the same settings on each portal.
    I also made the right settings in the data configuration service.
    Does anyone knows why the iView only works on one of our portals?
    Thanks a lot in advance.
    Best wishes

    Hello,
    There could be various reasons for such behaviors. I will present 2 of the most common reasons:
    1. "DuplicateKeyException" issue -
    An hourly aggregation takes place every hour during the day. When running a clustered environment, all server nodes "wake up" at the same time and try to perform the aggregation, so actually there is a race (since all server nodes are running the same application), and starting this moment data can't be collected (You can get a hint in NW7.0 from the "Status of Activity Reporting" iView when the following message appears: "The database contains non-aggregated data that is more than 2 hours old").
    In order to release the "Traffic jam" which was formed, one should find the duplicated entry (Usually in the WCR_USERSTAT DB table), and remove it manually. Sometimes it is better to remove all the entries from this timestamp and maybe even the whole table.
    However, this will only release the jam, but will not insure that it won't happen again on the next aggregation. In order to do so, you can take one of the following actions:
    (a) Install NW04-SP21/NW7.0-SP13 and on.          
    (b) The recommended solution - Install the latest version of Activity Report, which can be downloaded from SAP note 1084379 - "Portal Activity Report - Latest version (SDA file)".
    This behavior was fixed in NW04-SP21 / NW7.0-SP13, and was even improved in future versions (NW7.0 - SP17).
    For further details please see SAP note 1054145.
    2. The selected iViews are not same iViews which are in fact inside the role -
    The aggregation is OK, all the data is present within the DB, but when you try to generate a content report (iView/Pages report), you receive nothing or very little.
    This usually happens when one adds to the report the source iView itself (the ancestor), rather than the role which this iView was assigned to (Notice that the iView which lay under the role has a different ID and a different PCD URL than the ancestor iView). This causes the report to display the source iView, which of course, is not accessible to any of the end users.
    Hope this helps!
    Lior Baz
    Installed Base Development
    NetWeaver Portal Platform
    SAP Labs Israel

  • Activity Report Settings

    Is there a way to change the settings for Activity Reports available under System Administration > Monitoring > Portal > Activity Reports?  In particular, we want to expand the "Number of Users in the Last 3 Hours" section to let us see the information for a larger window, preferably at least 24 hours.  The "Status of Activity Reporting" section shows settings that suggest that the data collection and retention should allow for reporting over a longer period, but we can't find any way to access that information for analysis.  Any help is appreciated.

    Hi Todd,
    to change this you could open Content Administration and navigation to role Portal Content / Portal Administrators / System Administrators.
    Open it and edit iview com.sap.portal.usersInLast3Hours in page Activity report. There you can configure the period in the editor.
    An Alternative is to build an new iView (com.sap.portal.activityreport.frontend.ActivityReport) an configure it to your desires and place it anywhere you want.
    Hope this answers your question.
    Best Regards,
    Frank

  • Problems with activity reports on Enterprise Portal

    Hello, we have problems with activity reports on Enterprise Portal. It shows only zeros since certain date.
    We have this error in monitoring of Activity Reports - Status of Activity Reporting: "The database contains non-aggregated data that is more than 2 hours old".
    And we found this exception in logs: "Exception during a Prepared-statement DB update"
    What could be a problem? What should we do?
    Thank you.

    Configurarion of the Data Collection Service is done well, I think:
    Activate portal activity report: true
    First day of the week (e.g., Sunday or Monday): Monday
    Gather iView statistics:true
    Gather page statistics:true
    Gather statistics for remote users of local content (global portal): true
    Number of days for daily data retention: 90
    Number of days for hourly data retention: 30
    Number of days for monthly data retention: 730
    Number of days for quarterly data retention: 1460
    Number of days for weekly data retention: 365
    Objects to exclude from reports
    Pages for which to gather user data
    Save interval (minutes): 60
    What should we do then?

  • Need to join two queries A/R statemet and Activity report

    I have two  separate queries that need to be one. I have an A/R statement where I want to add notes next to each invoice. Currently these are two separate reports. How can I link the activity Report to the A/R Statement. Below are the two separate reports. I am not sure how to join the files. A/R Aging Report Declare @d datetime set @d /*Select 1 from jdt1 t where t.duedate*/=[%1] select * from ( SELECT T1.CardCode, T1.CardName, T0.RefDate, T0.Ref1 'Document Number',     CASE  WHEN T0.TransType=13 THEN 'Invoice'           WHEN T0.TransType=14 THEN 'Credit Note'           WHEN T0.TransType=30 THEN 'Journal'           WHEN T0.TransType=24 THEN 'Receipt'           END AS 'Document Type',     T0.DueDate, (T0.Debit- T0.Credit) 'Balance'     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,@d)=0 and DateDiff(day, T0.DueDate,@d)30 and DateDiff(day, T0.DueDate,@d)60 and DateDiff(day, T0.DueDate,@d)90 and DateDiff(day, T0.DueDate,@d)=121),0) '121+ Days' FROM JDT1 T0 INNER JOIN OCRD T1 ON T0.ShortName = T1.CardCode WHERE  T1.CardType = 'C' ) sub Activity Report SELECT T1.[ClgCode],T2.[U_NAME], T4.[Name] as Status, T0.[CardCode], T0.[CardName], T0.[DocNum], T0.[U_AIS_DVIInvName] as 'SF Invoice Name', (T0.U_AIS_DVISFSO) as 'SO#', T0.[DocDate],T0.Taxdate as 'Month Of Service',T0.[U_AIS_DVIOpptyNm],T0.[U_AIS_DVIAdvNm],T0.[U_AIS_DVIManNm],T0.[U_AIS_DVIAcctNm], T0.[DocTotal], T0.[DocStatus],  T1.[Recontact],  T1.[Details], T1.[Notes], T1.[CntctType], T3.[Name] FROM OINV T0 left join OCLG T1 on t0.docentry = t1.docentry and  T0.[ObjType]  =  T1.[DocType] left outer JOIN OUSR T2 ON T1.UserSign = T2.USERID left outer join OCLT T3 ON T1.CntctType = T3.Code left outer join OCLS T4 ON  T1.CntctSbjct = T4.Code where T1.[CntctType] =6 or T1.[CntctType] =7

    This is what I have so far.. it finally produced results but I notice the amount on the Activity + Aging does not match what is on the Aging and that seems to be what the issue is... that was my check to know the report is working. Basically the report should show the aging + any activity associated with the open invoice. The amount on the report is lower than the aging.. I am attaching the aging query  and the aging with activity Query. It looks like something is not joining correctly as the amounts do not match on the balance. Aging Report Declare @d datetime set @d /*Select 1 from jdt1 t where t.duedate*/=[%1] select * from ( SELECT T1.CardCode, T1.CardName, T0.RefDate, T0.Ref1 'Document Number',     CASE  WHEN T0.TransType=13 THEN 'Invoice'           WHEN T0.TransType=14 THEN 'Credit Note'           WHEN T0.TransType=30 THEN 'Journal'           WHEN T0.TransType=24 THEN 'Receipt'           END AS 'Document Type',     T0.DueDate, (T0.Debit- T0.Credit) 'Balance'     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,@d)=0 and DateDiff(day, T0.DueDate,@d)30 and DateDiff(day, T0.DueDate,@d)60 and DateDiff(day, T0.DueDate,@d)90 and DateDiff(day, T0.DueDate,@d)=121),0) '121+ Days' FROM JDT1 T0 INNER JOIN OCRD T1 ON T0.ShortName = T1.CardCode WHERE  T1.CardType = 'C' ) sub Activity + Aging Declare @d datetime set @d /*Select 1 from jdt1 t where t.duedate*/=[%1] select * from ( SELECT T1.CardCode, T1.CardName, T0.RefDate, T0.Ref1 'Document Number',     CASE  WHEN T0.TransType=13 THEN 'Invoice'           WHEN T0.TransType=14 THEN 'Credit Note'           WHEN T0.TransType=30 THEN 'Journal'           WHEN T0.TransType=24 THEN 'Receipt'           END AS 'Document Type',     T0.DueDate, (T0.Debit- T0.Credit) 'Balance'     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,@d)=0 and DateDiff(day, T0.DueDate,@d)30 and DateDiff(day, T0.DueDate,@d)60 and DateDiff(day, T0.DueDate,@d)90 and DateDiff(day, T0.DueDate,@d)=121),0) '121+ Days', T6.[FirstName] as 'AP Contact First Name', T6.[LastName] as 'AP Contact Last Name' , T6.[E_MailL], T6.[Notes1] as ' AP Supervisor', T2.[ClgCode],T7.[U_NAME], T4.[Name] as Status, T5.[DocNum], T5.[U_AIS_DVIInvName] as 'SF Invoice Name', (T5.U_AIS_DVISFSO) as 'SO#', T5.[DocDate],T5.Taxdate as 'Month Of Service',T5.[U_AIS_DVIOpptyNm],T5.[U_AIS_DVIAdvNm],T5.[U_AIS_DVIManNm],T5.[U_AIS_DVIAcctNm], T5.[DocTotal], T5.[DocStatus],  T2.[Recontact],  T2.[Details], T2.[Notes], T2.[CntctType], T3.[Name] FROM JDT1 T0 INNER JOIN OCRD T1 ON T0.ShortName = T1.CardCode INNER JOIN OCLG T2 ON T1.CardCode = T2.CardCode INNER JOIN OCLT T3 ON T2.CntctType = T3.Code INNER JOIN OCLS T4 ON T2.CntctSbjct = T4.Code INNER JOIN OINV T5 ON t5.docentry = t2.docentry and  T5.[ObjType]  =  T2.[DocType] left outer join OCPR T6 ON T2.CntctCode = T6.CntctCode left outer JOIN OUSR T7 ON T2.UserSign = T7.USERID WHERE  T1.CardType = 'C' and (T2.[CntctType] =6 or T2.[CntctType] =7) ) sub

  • Is it possible to export the page activity report to a pdf file?

    Is it possible to export the page activity report to a pdf file？and is there any api or samples to be reference

    Do you mean audit history?   One method would be similar to the following sample that you could extend to create a PDF from the data returned:
    http://www.eyelock.net/blog/archives/533
    BUT the method used above via JCR Query is an implementation detail.  For future proofing, you should use the ReplicationStatus status = page.adaptTo(ReplicationStatus.class in your code to get the audit logs for a particular page, rather than a straight JCR query. (recommended by Jörg Hoh @ http://forums.adobe.com/message/5253760).

  • Activity report failed(Communication error)- while check-in Activity

    Hello SDN,
    I am getting following error while Checking in activity from open activities .currently we are using NWDS7.3
    CHECKIN      Finished24s.9Files scuceeded.
    ACTIVATE     Activation Performed.Build request ID : 166
              Internal Problem(Activity report failed(Communication error
    [cause: Unalble to open connection to host<host>:<port>][reason:Address already in use : connect]]))
    Check-in completed successfully but Activation is not completed and giving connectivity error described above. Again
    I activated activity from Activation view. Still I am getting following error description.Plesae provide me solution
    to resolve this issue.
    GET_STATUS      could not retrieve activation status of request '166' (Unable to connect to
    host:port-Address already in use:connect(Service call exception; nested exception java.io.
    IOException: Unable to connect to host:port-Address already in use:connect))
    regards,
    Sree.

    Just check the full hostname of your DTR server, should be like
    hostname.company.com
    and check if somewhere only
    hostname
    is being used.and both are getting successfully pinged. DO not try the NWDS ping. Use command prompt and
    ping hostname
    and
    ping hostname.company.com
    Also this happens due to some clash with some other developer. Please check after some time, may be after a desktop restart. things should start working.
    Edited by: Varun Biswas on Nov 29, 2011 11:53 PM
    Edited by: Varun Biswas on Nov 29, 2011 11:53 PM

  • Inter active report objects

    i want a beautiful inter active report  object based on SD module help me one.

    REPORT ZZ_22038_22098_002 NO STANDARD PAGE HEADING LINE-SIZE 650
    MESSAGE-ID ZZ_9838 .
    TYPE-POOLS: SLIS.
    *type declaration for values from ekko
    TYPES: BEGIN OF I_EKKO,
    EBELN LIKE EKKO-EBELN,
    AEDAT LIKE EKKO-AEDAT,
    BUKRS LIKE EKKO-BUKRS,
    BSART LIKE EKKO-BSART,
    LIFNR LIKE EKKO-LIFNR,
    END OF I_EKKO.
    DATA: IT_EKKO TYPE STANDARD TABLE OF I_EKKO INITIAL SIZE 0,
    WA_EKKO TYPE I_EKKO.
    *type declaration for values from ekpo
    TYPES: BEGIN OF I_EKPO,
    EBELN LIKE EKPO-EBELN,
    EBELP LIKE EKPO-EBELP,
    MATNR LIKE EKPO-MATNR,
    MENGE LIKE EKPO-MENGE,
    MEINS LIKE EKPO-MEINS,
    NETPR LIKE EKPO-NETPR,
    END OF I_EKPO.
    DATA: IT_EKPO TYPE STANDARD TABLE OF I_EKPO INITIAL SIZE 0,
    WA_EKPO TYPE I_EKPO .
    *variable for Report ID
    DATA: V_REPID LIKE SY-REPID .
    *declaration for fieldcatalog
    DATA: I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
    WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
    DATA: IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
    declaration for events table where user comand or set PF status will
    be defined
    DATA: V_EVENTS TYPE SLIS_T_EVENT,
    WA_EVENT TYPE SLIS_ALV_EVENT.
    declartion for layout
    DATA: ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
    declaration for variant(type of display we want)
    DATA: I_VARIANT TYPE DISVARIANT,
    I_VARIANT1 TYPE DISVARIANT,
    I_SAVE(1) TYPE C.
    *PARAMETERS : p_var TYPE disvariant-variant.
    *Title displayed when the alv list is displayed
    DATA: I_TITLE_EKKO TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED'.
    DATA: I_TITLE_EKPO TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED'.
    INITIALIZATION.
    V_REPID = SY-REPID.
    PERFORM BUILD_FIELDCATLOG.
    PERFORM EVENT_CALL.
    PERFORM POPULATE_EVENT.
    START-OF-SELECTION.
    PERFORM DATA_RETRIEVAL.
    PERFORM BUILD_LISTHEADER USING IT_LISTHEADER.
    PERFORM DISPLAY_ALV_REPORT.
    *& Form BUILD_FIELDCATLOG
    Fieldcatalog has all the field details from ekko
    FORM BUILD_FIELDCATLOG.
    WA_FIELDCAT-TABNAME = 'IT_EKKO'.
    WA_FIELDCAT-FIELDNAME = 'EBELN'.
    WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
    APPEND WA_FIELDCAT TO I_FIELDCAT.
    CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'IT_EKKO'.
    WA_FIELDCAT-FIELDNAME = 'AEDAT'.
    WA_FIELDCAT-SELTEXT_M = 'DATE.'.
    APPEND WA_FIELDCAT TO I_FIELDCAT.
    CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'IT_EKKO'.
    WA_FIELDCAT-FIELDNAME = 'BUKRS'.
    WA_FIELDCAT-SELTEXT_M = 'COMPANY CODE'.
    APPEND WA_FIELDCAT TO I_FIELDCAT.
    CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'IT_EKKO'.
    WA_FIELDCAT-FIELDNAME = 'BUKRS'.
    WA_FIELDCAT-SELTEXT_M = 'DOCMENT TYPE'.
    APPEND WA_FIELDCAT TO I_FIELDCAT.
    CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'IT_EKKO'.
    WA_FIELDCAT-FIELDNAME = 'LIFNR'.
    WA_FIELDCAT-NO_OUT = 'X'.
    WA_FIELDCAT-SELTEXT_M = 'VENDOR CODE'.
    APPEND WA_FIELDCAT TO I_FIELDCAT.
    CLEAR WA_FIELDCAT.
    ENDFORM. "BUILD_FIELDCATLOG
    *& Form EVENT_CALL
    we get all events - TOP OF PAGE or USER COMMAND in table v_events
    FORM EVENT_CALL.
    CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
    I_LIST_TYPE = 0
    IMPORTING
    ET_EVENTS = V_EVENTS
    EXCEPTIONS
    LIST_TYPE_WRONG = 1
    OTHERS = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM. "EVENT_CALL
    *& Form POPULATE_EVENT
    Events populated for TOP OF PAGE & USER COMAND
    FORM POPULATE_EVENT.
    READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
    IF SY-SUBRC EQ 0.
    WA_EVENT-FORM = 'TOP_OF_PAGE'.
    MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
    WA_EVENT-FORM.
    ENDIF.
    READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
    IF SY-SUBRC EQ 0.
    WA_EVENT-FORM = 'USER_COMMAND'.
    MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
    WA_EVENT-NAME.
    ENDIF.
    ENDFORM. "POPULATE_EVENT
    *& Form data_retrieval
    retreiving values from the database table ekko
    FORM DATA_RETRIEVAL.
    SELECT EBELN AEDAT BUKRS BSART LIFNR FROM EKKO INTO TABLE IT_EKKO.
    ENDFORM. "data_retrieval
    *& Form bUild_listheader
    text
    -->I_LISTHEADEtext
    FORM BUILD_LISTHEADER USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
    DATA HLINE TYPE SLIS_LISTHEADER.
    HLINE-INFO = 'this is my first alv pgm'.
    HLINE-TYP = 'H'.
    ENDFORM. "build_listheader
    *& Form display_alv_report
    text
    FORM DISPLAY_ALV_REPORT.
    V_REPID = SY-REPID.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    I_CALLBACK_PROGRAM = V_REPID
    I_CALLBACK_PF_STATUS_SET = ' '
    I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
    I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
    I_GRID_TITLE = I_TITLE_EKKO
    I_GRID_SETTINGS =
    IS_LAYOUT = ALV_LAYOUT
    IT_FIELDCAT = I_FIELDCAT[]
    IT_EXCLUDING =
    IT_SPECIAL_GROUPS =
    IT_SORT =
    IT_FILTER =
    IS_SEL_HIDE =
    i_default = 'ZLAY1'
    I_SAVE = 'A'
    is_variant = i_variant
    IT_EVENTS = V_EVENTS
    TABLES
    T_OUTTAB = IT_EKKO
    EXCEPTIONS
    PROGRAM_ERROR = 1
    OTHERS = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM. "display_alv_report
    *& Form TOP_OF_PAGE
    text
    FORM TOP_OF_PAGE.
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
    IT_LIST_COMMENTARY = IT_LISTHEADER
    i_logo =
    I_END_OF_LIST_GRID =
    ENDFORM. "TOP_OF_PAGE
    *& Form USER_COMMAND
    text
    -->R_UCOMM text
    -->, text
    -->RS_SLEFIELDtext
    FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
    RS_SELFIELD TYPE SLIS_SELFIELD.
    CASE R_UCOMM.
    WHEN '&IC1'.
    READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
    PERFORM BUILD_FIELDCATLOG_EKPO.
    PERFORM EVENT_CALL_EKPO.
    PERFORM POPULATE_EVENT_EKPO.
    PERFORM DATA_RETRIEVAL_EKPO.
    PERFORM BUILD_LISTHEADER_EKPO USING IT_LISTHEADER.
    PERFORM DISPLAY_ALV_EKPO.
    ENDCASE.
    ENDFORM. "user_command
    *& Form BUILD_FIELDCATLOG_EKPO
    text
    FORM BUILD_FIELDCATLOG_EKPO.
    WA_FIELDCAT-TABNAME = 'IT_EKPO'.
    WA_FIELDCAT-FIELDNAME = 'EBELN'.
    WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
    APPEND WA_FIELDCAT TO I_FIELDCAT.
    CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'IT_EKPO'.
    WA_FIELDCAT-FIELDNAME = 'EBELP'.
    WA_FIELDCAT-SELTEXT_M = 'LINE NO'.
    APPEND WA_FIELDCAT TO I_FIELDCAT.
    CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'I_EKPO'.
    WA_FIELDCAT-FIELDNAME = 'MATNR'.
    WA_FIELDCAT-SELTEXT_M = 'MATERIAL NO.'.
    APPEND WA_FIELDCAT TO I_FIELDCAT.
    CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'I_EKPO'.
    WA_FIELDCAT-FIELDNAME = 'MENGE'.
    WA_FIELDCAT-SELTEXT_M = 'QUANTITY'.
    APPEND WA_FIELDCAT TO I_FIELDCAT.
    CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'I_EKPO'.
    WA_FIELDCAT-FIELDNAME = 'MEINS'.
    WA_FIELDCAT-SELTEXT_M = 'UOM'.
    APPEND WA_FIELDCAT TO I_FIELDCAT.
    CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'I_EKPO'.
    WA_FIELDCAT-FIELDNAME = 'NETPR'.
    WA_FIELDCAT-SELTEXT_M = 'PRICE'.
    APPEND WA_FIELDCAT TO I_FIELDCAT.
    CLEAR WA_FIELDCAT.
    ENDFORM. "BUILD_FIELDCATLOG_EKPO
    *& Form event_call_ekpo
    we get all events - TOP OF PAGE or USER COMMAND in table v_events
    FORM EVENT_CALL_EKPO.
    CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
    I_LIST_TYPE = 0
    IMPORTING
    ET_EVENTS = V_EVENTS
    EXCEPTIONS
    LIST_TYPE_WRONG = 1
    OTHERS = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM. "event_call_ekpo
    *& Form POPULATE_EVENT
    Events populated for TOP OF PAGE & USER COMAND
    FORM POPULATE_EVENT_EKPO.
    READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
    IF SY-SUBRC EQ 0.
    WA_EVENT-FORM = 'TOP_OF_PAGE'.
    MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
    WA_EVENT-FORM.
    ENDIF.
    ENDFORM. "POPULATE_EVENT
    *& Form TOP_OF_PAGE
    text
    FORM F_TOP_OF_PAGE.
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
    IT_LIST_COMMENTARY = IT_LISTHEADER
    i_logo =
    I_END_OF_LIST_GRID =
    ENDFORM. "TOP_OF_PAGE
    *& Form USER_COMMAND
    text
    -->R_UCOMM text
    -->, text
    -->RS_SLEFIELDtext
    *retreiving values from the database table ekko
    FORM DATA_RETRIEVAL_EKPO.
    SELECT EBELN EBELP MATNR MENGE MEINS NETPR FROM EKPO INTO TABLE IT_EKPO.
    ENDFORM.
    FORM BUILD_LISTHEADER_EKPO USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
    DATA: HLINE1 TYPE SLIS_LISTHEADER.
    HLINE1-TYP = 'H'.
    HLINE1-INFO = 'CHECKING PGM'.
    ENDFORM.
    FORM DISPLAY_ALV_EKPO.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    I_INTERFACE_CHECK = ' '
    I_BYPASSING_BUFFER = ' '
    I_BUFFER_ACTIVE = ' '
    I_CALLBACK_PROGRAM = V_REPID
    I_CALLBACK_PF_STATUS_SET = ' '
    I_CALLBACK_USER_COMMAND = 'F_USER_COMMAND'
    I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
    I_CALLBACK_HTML_TOP_OF_PAGE = ' '
    I_CALLBACK_HTML_END_OF_LIST = ' '
    I_STRUCTURE_NAME =
    I_BACKGROUND_ID = ' '
    I_GRID_TITLE = I_TITLE_EKPO
    I_GRID_SETTINGS =
    IS_LAYOUT =
    IT_FIELDCAT = I_FIELDCAT[]
    IT_EXCLUDING =
    IT_SPECIAL_GROUPS =
    IT_SORT =
    IT_FILTER =
    IS_SEL_HIDE =
    I_DEFAULT =
    I_SAVE = 'A'
    IS_VARIANT =
    IT_EVENTS = V_EVENTS
    TABLES
    T_OUTTAB = IT_EKPO
    EXCEPTIONS
    PROGRAM_ERROR = 1
    OTHERS = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM.
    regards
    aswin

  • Activity reports showing only UME users

    Hi,
    Activity reports showing only the status of UME users. It is not showing the status of the users coming from LDAP.
    Will there be any additional settings needed for this. Can anyone give me the step by step full details of the activity reports cofiguration settings.
    Raghu

    Hi Raghu,
    What kind of report are you talking about?
    General information for How the Portal Activity Report Works :
    http://help.sap.com/saphelp_nw70/helpdata/EN/b5/c652070d474533a18a930112a4b926/frameset.htm
    Viewing Activity Reporting Status :
    http://help.sap.com/saphelp_nw70/helpdata/EN/08/242f423d09f750e10000000a155106/frameset.htm
    Regards
    Victoria Gur
    SAP IBD

  • Why is my Subscriber Message activity report empty?

    Hi,
    I trying to see who called and left messages for ceratin individuals before they were deleted. This report would be just what i am looking for except the columnes are all blank. Could it be becasue the user deleted the messages from their inbox or is there a parameter that has to be set. I am runnng CUCXN 7.1(5)ES7.
    Thanks in advance.

    Hi there,
    You are hitting this 7.x bug;
    CSCsr45007 - Subscriber Message Activity report problems
    Description
    Symptom:
    Subscriber Message Activity Report doesn't have data that is expected.  Many fields come up as N/A or blank.
    Conditions:
    This happens any time the report is run.
    Workaround:
    None.
    Further Problem Description:
    This underlying problems were diagnosed after 7.0 shipped and will be addressed in 8.0.  It entails a rewrite of this report.
    First Found in:                          (4)
    1.2(1),2.0,7.0(0.313),7.0(1)
    Status:
    Fixed
    Last Modified:
    May 26,2012
    Fixed in:                          (8)
    8.0(0.215),8.0(0.207),8.0(0.205),8.0(0.189)
    8.0(0.178),8.0(0.168),8.0(0.164),8.0(0.160)
    Product:
    Cisco Unity Connection
    Platform:
    Dependent
    Severity:
    4 - minor
    You may want to have a look at the ideas from Jeff in this thread
    https://supportforums.cisco.com/message/1209592#1209592
    Cheers!
    Rob
    "Every fool's got a reason to feelin' sorry for himself" - Springsteen

  • PF STATUS IN ALV REPORT

    hi,
    How to use PF STATUS IN ALV REPORT?

    HI,
    see this code.
    TABLES:MARA.
    SELECT-OPTIONS: MATNR FOR MARA-MATNR.
    DATA:BEGIN OF ITAB OCCURS 0,
         MATNR LIKE MARA-MATNR,
         ERSDA LIKE MARA-ERSDA,
         MTART LIKE MARA-MTART,
         MBRSH LIKE MARA-MBRSH,
    END OF ITAB.
    SELECT * FROM MARA INTO CORRESPONDING FIELDS OF TABLE ITAB WHERE MATNR
    IN MATNR.
    TYPE-POOLS SLIS.
    DATA:FCAT TYPE slis_t_fieldcat_alv.
    DATA:LAYOUT TYPE slis_layout_alv.
    DATA:EVE TYPE slis_t_event WITH HEADER LINE.
    DATA:HEAD TYPE slis_t_listheader WITH HEADER LINE.
    DATA:SORT TYPE slis_t_sortinfo_alv WITH HEADER LINE.
    SORT-UP = 'X'.
    SORT-SPOS = 1.
    SORT-FIELDNAME = 'ERSDA'.
    SORT-tabname = 'MARA'.
    APPEND SORT.
    SORT-SPOS = 2.
    SORT-FIELDNAME = 'MTART'.
    SORT-tabname = 'MARA'.
    APPEND SORT.
    EVE-NAME = 'TOP_OF_PAGE'.
    EVE-FORM = 'TOPOFPAGE'.
    APPEND EVE.
    EVE-NAME = 'TOP_OF_LIST'.
    EVE-FORM = 'TOPOFLIST'.
    APPEND EVE.
    EVE-NAME = 'END_OF_LIST'.
    EVE-FORM = 'ENDOFLIST'.
    APPEND EVE.
    LAYOUT-ZEBRA = 'X'.
    LAYOUT-no_hline = 'X'.
    LAYOUT-NO_VLINE = 'X'.
    LAYOUT-window_titlebar = 'MATERIAL DETAILS'.
    CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
       I_PROGRAM_NAME               = SY-REPID
       I_INTERNAL_TABNAME           = 'ITAB'
      I_STRUCTURE_NAME             =
      I_CLIENT_NEVER_DISPLAY       = 'X'
       I_INCLNAME                   = SY-REPID
      I_BYPASSING_BUFFER           =
      I_BUFFER_ACTIVE              =
      CHANGING
        CT_FIELDCAT                  = FCAT
    EXCEPTIONS
      INCONSISTENT_INTERFACE       = 1
      PROGRAM_ERROR                = 2
      OTHERS                       = 3
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      I_INTERFACE_CHECK              = ' '
      I_BYPASSING_BUFFER             =
      I_BUFFER_ACTIVE                = ' '
       I_CALLBACK_PROGRAM             = SY-REPID
    <b>   I_CALLBACK_PF_STATUS_SET       = 'STATUS'
       I_CALLBACK_USER_COMMAND        = 'UCOMM'</b>
      I_STRUCTURE_NAME               =
       IS_LAYOUT                      = LAYOUT
       IT_FIELDCAT                    = FCAT
      IT_EXCLUDING                   =
      IT_SPECIAL_GROUPS              =
       IT_SORT                        = SORT[]
      IT_FILTER                      =
      IS_SEL_HIDE                    =
      I_DEFAULT                      = 'X'
      I_SAVE                         = ' '
      IS_VARIANT                     =
       IT_EVENTS                      = EVE[]
      IT_EVENT_EXIT                  =
      IS_PRINT                       =
      IS_REPREP_ID                   =
      I_SCREEN_START_COLUMN          = 5
      I_SCREEN_START_LINE            = 5
      I_SCREEN_END_COLUMN            = 120
      I_SCREEN_END_LINE              = 25
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER        =
      ES_EXIT_CAUSED_BY_USER         =
      TABLES
        T_OUTTAB                       = ITAB
    EXCEPTIONS
      PROGRAM_ERROR                  = 1
      OTHERS                         = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    FORM TOPOFPAGE.
    REFRESH HEAD.
        HEAD-TYP = 'H'.
        HEAD-INFO = 'MATERIALS'.
        APPEND HEAD.
        CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
          EXPORTING
            IT_LIST_COMMENTARY       = HEAD[]
          I_LOGO                   =
          I_END_OF_LIST_GRID       =
    ENDFORM.
    FORM TOPOFLIST.
    REFRESH HEAD.
        HEAD-TYP = 'H'.
        HEAD-INFO = 'MATERIALS-LISTTOP'.
        APPEND HEAD.
        CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
          EXPORTING
            IT_LIST_COMMENTARY       = HEAD[]
          I_LOGO                   =
          I_END_OF_LIST_GRID       =
    ENDFORM.
    FORM ENDOFLIST.
    REFRESH HEAD.
        HEAD-TYP = 'H'.
        HEAD-INFO = 'MATERIALS-LISTEND'.
        APPEND HEAD.
        CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
          EXPORTING
            IT_LIST_COMMENTARY       = HEAD[]
          I_LOGO                   =
          I_END_OF_LIST_GRID       =
    ENDFORM.
    <b>FORM STATUS USING MYMENU.
        SET PF-STATUS 'MENU' excluding MYMENU.
    ENDFORM.
    FORM UCOMM USING CODE STEXT.
        CASE CODE.
            WHEN 'ABC'.
            WRITE:/ 'YOU HAVE CLICKED ON ABC'.
            WHEN 'XYZ'.
            WRITE:/ 'YOU HAVE CLICKED ON XYZ'.
        ENDCASE.
    ENDFORM.</b>
    rgds,
    bharat.

  • Activity Report download is saved without extension and unreadable

    Hello,
    The Portal Activity Report iView has a button which enables the user to download the report to his PC.
    The problem is that when the user clicks on that button and saves the file it is being saved by this default name: com.sap.portal.activityreport.frontend.DownloadableActivityReport
    The main problem is that it is being saved by default without any extension and after saving the user needs to manually add the .xls suffix.
    Another problem is that once I open the report with Excel The Object Name column is unreadable.
    Is there any way to resolve these issues?
    Roy

    Hi Roy,
    > if it wasn't supported there
    > or you would still consider it as a bug?
    The feature in general of course was supported, but what I cannot say is if it was a known issue that it didn't work correctly. As I dont't use the ActivityReport, I also have no experience if it didn't work at some time and maybe now is working.
    The wrong filename I don't expect to be corrected in the meanwhile, as said, that's a problem in some places. So at least for this you could open an OSS message. And maybe combine this with the problematic column issue.
    But if upgrading to SP18 would be an option for you, maybe you could first test that.
    Hope it helps
    Detlev

  • No data in Portal Database tables for Activity Report

    Hi experts,
    I've developed an Activity Report application in SAP Portal 7.0, which went live but the report shows no data.
    We are pulling data from 2 portal database tables: WCR_WEBCONTENTSTAT and WCR_USERPAGEUSAGE
    In non production environment there is data in the report but there is no data in the production environment.
    The Activity Report service is already activated/started and set to true.
    What could have caused this? And what should we check now?
    What other configurations/setup should be done?
    Regards,
    Greg

    Hi Greg,
    Those are the aggregated tables. If they are not filled with data although the Portal Activity Report is activated, you should check whether the aggregation finished successfully.
    In the older SPs there were some problems that were fixed in later SPs of 7.0.
    In order to have the latest version of Portal Activity report, you can check SAP note 1084379 - Portal Activity Report - Latest Version (SDA file).
    You can compare the SP via the MANIFAST file, as it contains the version and SP number.
    In order to troubleshoot problems in Activity Report, you can follow SAP note: 1690023 - Portal Activity Report - Component-specific Note
    Some basic checks that you can do:
    Run query on the raw data tables to check since when there is data in those tables:
    select min(timestamphour) from SAP<SystemID>DB.WCR_WEBCNODESTAT;
    If there is too much data from long time ago, then you should delete the old data, and leave only the new data (there is anyways retention time for the data to be kept).
    If there is no data, then it means that the Portal Activity Report does not collect data, and not really activated (usually this is not the case).
    The aggregation runs every top of the hour, so you can check in the default traces for an error during that time.
    In most of the cases something went wrong while aggregating the data.
    As a result the aggregation is not finished, so the transaction is not being committed, and the aggregated tables stay empty.
    If there is a DuplicateKeyException in the trace, you can follow SAP note 1054145 - Duplicate Key Exception.
    If you have any more questions, please don't hesitate to ask.
    I hope this information helps,
    Thanks & regards,
    Michal Zilcha-Lang

  • How to list the documents in the Portal Activity Report?

    Hello,
    In the Portal Activity Report I would like to see the documents list with number of uploads, number of downloads and the username who have accessed the documents for monthly. Can any one help me where to mention all the details regarding this one. I didn't found anything regarding this in the Portal Activity Report.
    Thnx in advance.
    cheers,
    Murali

    Hello,
    Can anyone help me solving this problem.
    Thnx in advance
    cheers
    Murali

  • Create an Activity Report for Current Week

    I would like to create a activity report for the current week. The trick is that if the weekday is Wednesday or earlier (Sunday being the first day of the week), the report shows last week's activities; but if the weekday is Thursday or later (Saturday being the last day of the week), the report shows the current weeks activities.
    I have a filter that works in Access but does not seem to work in Siebel. It does just what I explained above:
    Between CDate(Int((IIf(Weekday(Now())<=4,Now()-(6+Weekday(Now())),Now()-(Weekday(Now())-1))))) And CDate(Int((IIf(Weekday(Now())<=4,Now()-Weekday(Now()),Now()+(7-Weekday(Now()))))))
    Thank you,
    David
    Edited by: DavidE on Oct 7, 2008 4:17 PM

    David,
    try this:
    case DAYOFWEEK(CAST(Activity."Planned Start Time" AS date))when 1 then timestampadd(sql_tsi_day,1,CAST(Activity."Planned Start Time" AS date)) when 3 then timestampadd(sql_tsi_day,-1,CAST(Activity."Planned Start Time" AS date)) when 4 then timestampadd(sql_tsi_day,-2,CAST(Activity."Planned Start Time" AS date)) when 5 then timestampadd(sql_tsi_day,-3,CAST(Activity."Planned Start Time" AS date)) when 6 then timestampadd(sql_tsi_day,-4,CAST(Activity."Planned Start Time" AS date)) when 7 then timestampadd(sql_tsi_day,-5,CAST(Activity."Planned Start Time" AS date)) else CAST(Activity."Planned Start Time" AS date) end
    This gave me the sunday of the week. You should be able to modify this format for your purposes.
    cheers
    Alex

Maybe you are looking for