Status of Check Indexes for Cube in Red Color inspite of Job completed Succ

Hi All,
I have deleted indexes before loading data into Cube and  after loading i have created the indexes. When I have checked for  the Joblog , completed successfully
But when i have checked the status in Performance TAB of Cube, it is in Red color.
Morover i have repaired the indexes this also completed successfully.Still in Red Status
What could be done?
Regards,
C.V.

Hi Chakri,
Once load is completed now try with delete the indexes and create indexes once againg manually in performance tab.
Regards,
HARI GUPTA

Similar Messages

  • Do you have stock For ipod shuffle (red color) ??

    Do you have stock For ipod shuffle (red color) ?? , im interested in buying it .

    Take a look in the Apple Store
    http://www.apple.com/ipod-shuffle/

  • Error when creating BIA INDEX FOR CUBE

    Hi
    I am trying to create BIA index for a cube and I am getting error
    "An error occurred. Choose "Continue" to start again from the beginning"  in the second step. Could any body explain what this error mean and How to correct it.
    and when I press BIA Moniter tab  I am getting following message.
    An error occurred. Choose "Continue" to start again from the beginning
    "BIA Monitor Is Called for First Time
    The RFC destination for the BI accelerator is not yet specified in the
    system. Without the relevant entry in RSADMINA, the BIA monitor cannot
    be executed. Do you want to enter the RFC destination now?"
    Thanks in Advance
    Sarath
    Edited by: sarath kumar on Aug 21, 2008 9:42 AM

    Hi,
    Is there any way i can check bi accelerator installed or not for our bi server.I contacted basis team but they do not have any idea regarding this. but I heard from my ex colleage it is installed. and Reports from one cube is running very fast compared to recently created cube.
    Thanks
    Sarath

  • Table name where I can see the Secondary bit map Index for Cube Loads in BI

    Hello Friends I want to know the table name where I can see the Secondary bit map Index that gets created with each request that get loaded to Cube so each 1 request will be multiplied by 7 dimension and 7x1 = 7 local secondary bit map index will be created where is that table which show me that .
    Under Oracle every uncompressed request corresponds to one partition in the
    F facttable of the corresponding infocube. This partition also brings along
    a full set of secondary local bitmap index partitions.
    If you have a cube with 10 uncompressd requests and 10 dimensions (every
    dimension brings with it a local bitmap index) you have 100 partitions for
    the table itself and 10 x 10 index partitions which makes a total of
    100 database objects. where is that table in BI WHICH STORE THIS INFORMATION
    Also if I have E Table with no entries for future 2009 dentries will that be an issue with blank partition ion E Fact table if yes please suggest how to resolve this issue

    Hi Soniya
    Information about BI objects is stored in the RSD* tables. For example:
    Infocubes: RSDCUBE / RSDCUBET
    Aggregates: RSDDAGGR_V / RSDDAGGRT
    You can see information on abap dictionary object as well in transactions SE11 / SE14. You will have to know the real table name of the cube, should be something like /BIC/F* for the uncompressed and /BIC/E* for the compressed table.
    Best regards, Michael

  • Two Servers doing Query and Indexing for Search have red crosses for their rows.

    Hi,
    I have three servers under Search Application Topology:
    I have done a crawl reset and awaiting these to finish. Is this correct. I have also restarted both servers with the red crosses, but still they do not show up as ticked. I did run a command a powershell command reduce CPU usage by NodeRunner and
    also changed Max NodeRunner size to 200 in it's config. This is when things started to go wrong.
    Any ideas?
    Thanks.
    John.   

    Hi,
    I am glad to hear that your issue is solved.
    I find that setting the upper RAM usage of the Noderunner process to anything less than
    500MB would prevent the Admin components from loading and therefore the topology health states would not show in Search Administration.
    Setting the upper RAM usage of the Noderunner process to between 500MB and
    1GB, the Admin components would (mostly) load and the topology health states would show in Search Administration, but Search Crawls would consistently fail.
    Setting the upper RAM usage of the Noderunner process to anything above 1GB would allow Search to work correctly.
    Here are articles about performance Issue Caused By Node Runner In SharePoint 2013, take a look at:
    http://platinumdogs.me/2014/01/07/controlling-search-noderunner-memory-usage-in-sharepoint-2013/
    http://www.spdeveloper.co.in/sharepoint2013/optimizing-the-configuration-of-development-farm.aspx
    Best Regards,
    Lisa Chen
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Underwater Photos: Anyone use Ilife for adding back red colors?

    I use Ilife for my organizing my underwater photos. Often they are not truly representative because of the loss of red. Some programs have filters that are designed specifically for underwater corrections. Does anyone know of one that will work with Ilife.
    Thanks so much.
    Skip

    Photoshop or Photoshop Elements has tools for color corrections. You can set the white point and have all color in the photo adjusted based on that white point. Or shift the colors yourself by adding red, reducing blue, etc. until you get the look you want. I just don't know of an automatic Underwater correction.
    Regards.

  • Check online for broadband service problems in you...

    Hi Everyone
    If you have a broadband issue it's possible that there could be a temporary problem at your local exchange that is affecting every broadband connection in your area.
    You can check this on our broadband service status page:
    Check online for broadband service problems in your area
    The service status page can be used to check if the internet and telephone network is OK in your area.  It provides a list of known issues and planned engineering works and is updated regularly.
    If a problem affecting your area has only recently been resolved, you may still need to restart your modem or router to restore your broadband service.
    Thx
    Kerry
    Retired BTCare Community Manager - StephanieG and SeanD are your new Community Managers
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

    Hi,
    According to your description, I understand that the issue happens to several PCs with Outlook 2010.
    I noticed that you have done several troubleshooting about the Outlook crash issue. I suggest we can install Outlook 2013 in a new computer and check whether the issue happens in Outlook 2013.
    If the issue doesn’t happen in Outlook 2013, please update your Outlook 2010 to the latest patches and service packs and check whether the issue persists.
    Regards,
    Winnie Liang
    TechNet Community Support

  • How to create index for knowledge article IN CRM 7.0

    Hi,
    I want to delete the index for Knowledge Article, create again and do the complete compilation.
    In webui, Iam able to delete the Index and do complete compilation  and Iam not sure how to create the index.
    can anyone pl guide
    Regards
    BABU

    Hi,
       Once u created a data source. go to respective application component which u have assigned ducring creatinon of DS in RSO2 and right click on it and use replicate metadata.
    a popup with options 1. as data source
                                   2. as 3.x data source will come u select 2 one here and go on.

  • SMS_STATE_MIGRATION_POINT Health check failed for port 80 with status code 500

    My SMS_STATE_MIGRATION_POINT gets a red cross because the health check of the SMS_STATE_MIGRATION_POINT is “sometimes” failing. I don’t understand why its fails sometimes? Any suggestions.
    gr, Iwan
    Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 2:51:29 PM 22044 (0x561C)
    Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 2:51:29 PM 22044 (0x561C)
    Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 2:56:29 PM 22044 (0x561C)
    Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 2:56:29 PM 22044 (0x561C)
    Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 2:56:29 PM 22044 (0x561C)
    Checking store for cleanup of failed or stale state stores... SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
    Call to HttpSendRequestSync failed for port 80 with status code 500, text: Internal Server Error SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
    Health check request failed, status code is 500, 'Internal Server Error'. SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
    STATMSG: ID=6207 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_STATE_MIGRATION_POINT" SYS=SWAMS0083 SITE=P01 PID=13560 TID=22044 GMTDATE=Thu Apr 15 13:01:29.777 2010 ISTR0="500" ISTR1="Internal Server Error" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
    Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
    Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:06:29 PM 22044 (0x561C)
    Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:06:29 PM 22044 (0x561C)
    Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:06:29 PM 22044 (0x561C)
    Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:11:29 PM 22044 (0x561C)
    Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:11:29 PM 22044 (0x561C)
    Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:11:29 PM 22044 (0x561C)
    Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:16:29 PM 22044 (0x561C)
    Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:16:29 PM 22044 (0x561C)
    Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:16:29 PM 22044 (0x561C)
    Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:21:29 PM 22044 (0x561C)
    Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:21:29 PM 22044 (0x561C)
    Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:21:29 PM 22044 (0x561C)
    Call to HttpSendRequestSync failed for port 80 with status code 500, text: Internal Server Error SMS_STATE_MIGRATION_POINT 4/15/2010 3:26:29 PM 22044 (0x561C)
    Health check request failed, status code is 500, 'Internal Server Error'. SMS_STATE_MIGRATION_POINT 4/15/2010 3:26:29 PM 22044 (0x561C)
    Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:26:29 PM 22044 (0x561C)

    I'va got the following event in my security event log this is strange because the Windows Firewall is off and the problem is not always there, 8 out 10 time the health  checks passes.
    Log Name:      Security
    Source:        Microsoft-Windows-Security-Auditing
    Date:          4/15/2010 7:01:27 PM
    Event ID:      5159
    Task Category: Filtering Platform Connection
    Level:         Information
    Keywords:      Audit Failure
    User:          N/A
    Computer:      ********
    Description:
    The Windows Filtering Platform has blocked a bind to a local port.
    Application Information:
     Process ID:  13560
     Application Name: \device\harddiskvolume2\programs (x86)\microsoft configuration manager\bin\i386\smsexec.exe
    Network Information:
     Source Address:  0.0.0.0
     Source Port:  9000
     Protocol:  17
    Filter Information:
     Filter Run-Time ID: 0
     Layer Name:  Resource Assignment
     Layer Run-Time ID: 36

  • Status control table - 'Perform update for status control table for cube '

    Hello Experts,
    While loading data to DSO, I am getting this message - 'Perform update for status control table for cube Z3MLQUA'.
    What is status control table ? and can I have some inputs as to how to solve this issue
    Regards,
    arjun

    Hi,
    This message is not a issue in itself. It is just a SAP message which means that the system is checking/updating the system tables to carry out the operation whether it can be done or not.
    If your loads are failing at this step or after this message there can be many reasons, check some of  the possible reasons below
    Performing check and potential update for status control table
    Update from PSA error in Process Chain
    problem in deleting request
    Reporting not available ,even if Data is sucessfully loaded into DT
    Hope this helps,
    Kush kashyap

  • Indexes creation for cubes

    Hi all,
    I cretaed a Cube in the BW system. When I choose infoprovider>cube>manage>performance, we have two indexes options: "check indexes" and "check aggregate indexes", I would like to know the difference between them.
    Below we have the "data base statistics section", when I click the "create statistics (batch) button", a new screen is shown, and there you can select two options: "refresh DB statistics after each data load" and "also refresh statisctics after delta upload", I would like to know the meaning of both options.
    Kindly Help,
    Thanks
    Laura Gómez

    Hi,
    Infocube Index
    InfoCubes (fact, dimension tables) are fully indexed and usually do not require additional indices.
    The indexing as follows: Fact Table (consists of dimension IDs and key figures) B-tree indices for InfoCube dimensions (“high cardinality”) should be set only in special cases. The dimension should be very large (in comparison to the fact table) and the maintenance time for bitmap indices (deletion and re-build) should have significant impact. You should be aware of the fact that the B-tree index cannot be used for the star join and hence, reduces query performance. In the Performance Tab of the InfoCube use drop and recreate the system defined indices to perk up the performance.http://help.sap.com/saphelp_nw04/helpdata/en/83/0ac9be421f874b8533f3b315230b32/frameset.htm

  • Oracle 11g RAC on Red Hat EL 4 x86_64 check failed for glibc-2.3.4-2.19

    Hi , I had a Red Hat EL 4 linux with FULL installion, so all the packages are installed auto.
    when I check the glibc with RPM, I got :
    rpm -q --queryformat "%{NAME}-%{VERSION}.%{RELEASE}.%{ARCH}\n" glibc
    glibc-2.3.4.2.41.i686
    glibc-2.3.4.2.41.x86_64
    It looks the 32 bit and 64 bit glibc are all installed.
    but when I run cluvfy to check RAC installion , I got :
    Check: Package existence for "glibc-2.3.4-2.19"
    Node Name Status Comment
    wcmrac2 missing failed
    wcmrac1 missing failed
    Result: Package existence check failed for "glibc-2.3.4-2.19". －－－－－32 bit check failed ？？
    Check: Package existence for "glibc-2.3.4-2.19"
    Node Name Status Comment
    wcmrac2 glibc-2.3.4-2.41 passed
    wcmrac1 glibc-2.3.4-2.41 passed
    Result: Package existence check passed for "glibc-2.3.4-2.19".－－－－64 bit check passed ？？
    why does this ?

    Did you check the compatibility of Oracle Database 11g with RedHat 4 in the compatibility matrix or the installation docs?

  • Why do we create indexes for DSOs and Cubes.What is the use of it?

    Hi All,
    Can you please tell me why are indexes created for DSOs and Cubes.
    What is the use with the creation of indexes.
    Thanks,
    Sravani

    HI ,
    An index is a copy of a database table that is reduced to certain fields. This copy is always in sorted form. Sorting provides faster access to the data records of the table, for example, when using a binary search. A table has a primary index and a secondary index. The primary index consists of the key fields of the table and is automatically created in the database along with the table. You can also create further indexes on a table in the Java Dictionary. These are called secondary indexes. This is necessary if the table is frequently accessed in a way that does not take advantage of the primary index. Different indexes for the same table are distinguished from one another by a separate index name. The index name must be unique. Whether or not an index is used to access a particular table, is decided by the database system optimizer. This means that an index might improve performance only with certain database systems. You specify if the index should be used on certain database systems in the index definition. Indexes for a table are created when the table is created (provided that the table is not excluded for the database system in the index definition). If the index fields represent the primary keys of the table, that is, if they already uniquely identify each record of the table, the index is referred to as an unique index.
    they are created on DSO and cube for the performance purpose ..and reports created on them wil be also more efficent ..
    Regards,
    shikha

  • Errors in the OLAP storage engine: An error occurred while processing the indexes for the partition of the measure group of the cube from the database.

    Errors in the OLAP storage engine: An error occurred while processing the indexes for the partition of the measure group of the cube from the database.
    I have dropped and recreated a fact table to refresh the data as the table is having identity columns. So not able to directly insert data. After that cube is throwing above error.
    Please suggest.

    Hi Md,
    It hard to analyse the issue base on the limited information, Are there any error message on the log? Under C:\Program Files\Microsoft SQL Server\MSAS11.\OLAP\Log (this could be different for your server), there are 3 log files that are generated:
    msmdrrv.log
    FlightRecorderCurrent.trc
    FightRecorderBack.trc
    The msmdrrv.log simply points to the other two logs. There might be some detail information for this error. Please provide us the detail information about it, so that we can make further analysis.
    Regards,
    Charlie Liao
    TechNet Community Support

  • Cube process stuck - finished building aggregations and indexes for the partition

    Hi friends
    My cube processing stuck up at "Finished building aggregations and indexes for the partition". How can I troubleshoot this.
    Appreciate your help. 
    Royal Thomas

    Royal,
    Your question is discussed
    here and
    here also. May be it will help you out.
    Best regards.

Maybe you are looking for