Status of number range has not updated

HI GURUS!
I read a lot of similar questions as mine. But I didn't find the correct answer for my problem.
The issue is: after I uploaded the Vendor master with LSMW, the status of the number range is still 0!
So I have to change it manually. What should be the problem? Is it possible that problem is in the NUMBER_GET_NEXT fm?
Thanks in advance,
Gábor

Hi!
The number range for vendors is internal! If I change the status after migration, in the XK01 transaction the system gives the correct next number. But how can it possible that the status has not updated after uploading?
Best regards,
Gábor

Similar Messages

Dcoument No range is not updated

Dear All,
Issue: Dcoument No range is not updated even though document is generated.
Number Range Number - DR document reached the maximum document number in the range, but it is not updated in FBN1. Again same type (DR) documents posted from legacy system and through XI interface it is trying to post the same in R3.
Please advise.
Regards,
Malani

Dear Chetan,
Thank you for reply.
We can create the document range, but it will not solve our problem. Number range is not updated with the use of documents. For example if number range is 1 to 100, and we have generated no range till 10 then system is not updating we have used document number range in FBN1 with 10 documents used. Once all documents are finished error is triggered number range is finished.
Regards,
Malani

PGI status at delivery header level has not updated

Dear Friends,
We had created deliver, picking was completed and PGI was completed successfully. However when we try to create Billing, an error occurs stating that PGI is not completed.
Further when we check the delivery, the Goods Issue status at item level is completed but at the Header level the GM is B which is partially completed. In the Document flow we can see the PGI Status is completed.
I think there might be some table which was not update. Is there any way to update the status in the delivery?
Further we tried to reverse the PGI through VL09, but system is not able to find the delivery ..this might be because the system might be checking in some table where the statues has not updated.
Please suggest me how should I complete this.

HI,
Go to transaction "SE16N" and enter table "VBUK" and give the delivery number in the field sales document number. Now you type "&SAP_EDIT" in the transaction bar and execute. Here you can change the status(Total goods movement). And see If you can actually bill the document. Kindly please let me know If you need any more information on this.
Regards,
Ram Pedarla

My account has not updated new prepaid account

opened a new Prepaid mobile added to my account which has not happened also had alot of trouble rechargeing with Voucher because the my account was not showing after number of phone calls to Telstra and being told by robot can't do that ring this number same answer rang again and used a different answer got through to overseas call centre very nice but had np idea what i wanted recharge my prepaid finally someone worked out to recharge with voucher.My problem now is my account still has not updated so I can recharge more when needed???

Hi shooterau,Try phoning Pre Paid on 1258880 and asking for technical support.

Message no. 8I766 Number Ranges are not maintained For Extended Withholding

Dear All,
I am facing the following problem when i am trying to generate the withholding tax certificate
1.) Message no. 8I766 Number Ranges are not maintained For Extended Withholding Tax
     Number Ranges are not maintained for Business Place and Section. Check entries in tables J_1iewt_cert (for Business Place) or J_1iewt_cert_n (for Section Code) and j_1iewt_certno in EWT.
I have checked all the above tables and found that the entries are maintained
2) When i am trying for print priview and then print its generating spool request and the certificate is getting saved -
> here the following problems are faced
      A) . TDS Number is not coming
      B).Details Of the tax deductor ( Name , Adress , TDS Circle , TAN & PAN is not coming Where       to update these details
      C) In Amount Paid / Credited Column - Some fixed amount is comming irrespective of the actual amount credited
Please help me in soving the above issues
Thanks & Regards
Arun.R

Hi
You need to maintain Section Code wise number range . Go to Sm30 Select Table J_1IEWT_CERT_N and maintain it.
Thanks
GG

Number range interval not found for object ISH_NLEI in executing NP38

Dear ALL,
In executing Transaction NP38 when we save the surgical procedure codes the system
generates an error message "number range interval not found " . The object referred here
ISH_NLEI number range has already been defined in spro Define technical number range.
Please assist what should be done here to resolve the problem.
Regards
Ramit

Hi, check if it maintained in tcode snro for this object

My feeds are updating but the iTunes store has not updated

I put my rss feed up on feedburner and all my feeds have updated but the iTunes store has not updated. I was wondering if there a simple explanation for it. Subscribers to the podcast have gotten the most recent update but the store hasn't reflected the new changes.

When you add a new episode to your feed and upload it, it appears immediately for subscribers because their iTunes application reads the feed directly and the Store is not involved.
However because of the huge number of podcasts in the Store (thousands) the Store caches the feed and checks it for updates periodically. For this reason it usually takes 1-2 days for new episodes to appear in the Store: sometimes it can be less, and occasionally the whole process seems to get stuck and it can take several days.
All this assumes that you haven't made an error of some sort in adding your episode: it's not possible to comment on that unless you would like to publish the URLs of both your feed and the Store page - this latter can be found by control-clicking on the podcast image (or where it should be) - and choosing 'Copy link'. Please include the http:// in both cases to make the links clickable.

My podcast has not updated in over two months. Ive tried everything to get it working. Please Help

My feed has not updated in the store for over two months. I now have three new episodes in there which are not showing up.
Everything works fine through itunes, i can see all episodes and my feed validates with the feed validator.
About 2 months ago my artwork dissappeared from the feed and since then it has never updated again.
Hope someone can help.
Store Address: http://itunes.apple.com/gb/podcast/beyond-silence/id513494851
Feed Address: http://www.hiddenagenda.dj/podcast/BeyondSilenceRSS.xml

Hi Roger, just to update you on the situation.
I did some more digging into the problem im having and it was suggested that i tried re-submitting the feed to the store.
On doing so i got the error message that my hosting does not have byte-range support which it seems a lot of people are having problems with. Having read further it seems apple introduced these changes around the time my podcast stopped updating which seems to tie into how the issue started.
So i created a test feed with one episode and a link to a media file from a working podcast and still it would not submit, i was getting the 'We have difficulty reading this feed. Connection Reset error'
Luckily i have another hosting provider so i uploaded the exact same test feed and the feed got accepted.
So i have come to the conclusion that my host does not have byte-range support but also it seems this is stopping it reading the actual .xml file as well as the .mp3 content which from reading other posts should not happen.
So im in the process of uploading the latest episode to my host that has byte-range support enabled and im going to update my current feed with one episode and a link to the .mp3 file on the server with byte-range support enabled and im hoping fingers crossed the feed updates.
Obviously i can set up a new feed on the server with byte-range support enabled but if my current feed fails to update at all im concerned i will never be able to update the feed again and therefore never be able to add the feed URL redirect code in order to keep my subscribers.
Thought id share this with you as it may help you in helping others having similar problems.
Richard Pitts

My Firefox 6.02 has not updated to 7 automatically yet?

My Firefox has not updated itself yet. I am using Firefox 6.0.2 and I rely on Firefox to automatically update b/c I am usually oblivious to software updates. I know about the Help~~~>about. But I rather not use that, I want Firefox to do it itself so I don't have to worry about being secure in the future.
Is Firefox 7 in the update channel or is there some other reason why firefox has not updated itself? I checked the options everything check out in terms of the options for automatic updates being checked.

Firefox 7.0 had a bug affecting a number of people so its updates were put on hold temporarily. A version 7.0.1 will be released soon for you to update to.

For object RF_BELEG number range does not exist

Hi,
while doing PGI, i get an error For Object RF_BELEG ,number range does not exist in company code ABCD. Where do i create the number range for this. I tried with FBN1 but not useful.
" Diagnosis says, the database table NRIV has the delivery class as C. Make chages in customizing. "
what could be the reason for this error? can anyone help me to fix this error.
i tried to fix it through transaction code 'SNRO' and 'OBA7' but in vain
can anyone help me out

Try Extending the same in VN01 , and assigning it to your relevant document
Cheers

In transaction code BBP_PD the status of the workitem is not updating showi

Hi Gurus,
We have implemented N-Step BADI BBP_WFL_APPROV_BADI For Approvals Levels in SRM.
Work flow is triggering correctly and workitem is sent at all the levels. But in transaction code BBP_PD the status of the workitem is not updating showing the error message "NO WORKITEM FOUND" also status is not updating in BBP_PD.
Please reply with your suggestions.
Thanks in advance.
Madhukar

Hi
Thanks for your reply.
We are getting "No workitem found" status in BBP_PD transaction. But all approval process is happening perfectly and when we check status through "Status Monitor " through web it is updating correct status.
Status is updating in BBP_PD .Status of main workflow is displaying correctly and approval levels and corresponding approver names are displaying correctly, but only the status and time of approval is missing.
can you suggest something on this issue.
Workflow Item:
Workitem-ID        000002009126
Task                      WS90000040
Text                       Shopping Cart Approval N-Step 185522 (BADI)
Status                    STARTED
Statustext              In Process
Date                      09/24/2008
Time                     08:18:09
Node ID            Agent                    User                         State        Workitem       Created at
0040000000      Kotesh APP       APP_KOTESH          No workitem found
0040000002                                                                    No workitem found
0040000001      shiva APP         APP_SHIVA               No workitem found
0040000004                                                                    No workitem found
0040000003     shiva APP         APP_SHIVA               No workitem found
0040000006                                                                   No workitem found
0040000005      SM1                 NNA_FA_SM_1         No workitem found
0040000008                                                                   No workitem found
Regards
Madhu

Hello , Recently my company purchased a Fujifilm X30 . We were surprised that Adobe has not updated the plug in for this camera. Since we are your customers, we would like to know, when they will perform this update ? For us it is very important to work w

Hello , Recently my company purchased a Fujifilm X30 . We were surprised that Adobe has not updated the plug in for this camera. Since we are your customers, we would like to know, when they will perform this update ? For us it is very important to work with all our tools work quickly and efficiently, I guess I understand.
We await your response .
Thank you very much .

This is a user to user forum with "some" Adobe staff participation, make requests at this link
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Funds mngt - Number range 01 not found for object BULI_DOCNR

Hi all
need some urgent help to crack an error am getting while creating a budget in funds management.
the error am getting is
"Number range 01 not found for object BULI_DOCNR in fiscal year 2007"
I have maintained the number range in
Public Sector Management-Budgetary control system-Budgeting-Budget Entry Documents-Maintain Number Range Interval for Entry Documents.
But am still getting the error....
will really appreciate some help on this
thanks in advance

The number range object refers to "FM budgeting line item number "
Are you using Former budgeting or BCS ?
Try t-code- ok11 and ok91 under former budgeting.
Thanks
Siva

4 days, and Itunes has not updated..

I have added a graphic, and change descriptions, and Itunes still has not updated after 4 days.. What's going on??? All my files get's updated, just not the itunes/podcast page.

By the way, I'm still VERY happy with my ipod video. I would not trade it for anything else.. As a long time IBM platform user, I never saw myself buying an apple product; only because I was too scared of incompatability issues.. I love old classic movies, so the ipod video is perfect for me; and that inspired me to do a videocast, on itunes.
Sure apple are inovators, and changed the way the world handles audio/video. Infact, collectively, a lot of companies have made small contributions. However, it's fustratng when technical support, or issues with services, are not handled in a timely manor, or at least communicated to all users; so that we don't think we are doing something wrong, instead of generic referal links.

HT5246 I just run the Flashback malware removal tool, and then nothing happens. Will it be a problem? and if I have java installed and I disabled it during the installation, will my status as my machine has not java installed? thanks.

I just run the Flashback malware removal tool, and then nothing happens. Will it be a problem? and if I have java installed and I disabled it during the installation, will my status as my machine has not java installed? thanks.

Will it be a problem?
No.
...if I have java installed and I disabled it during the installation, will my status as my machine has not java installed?
Java is still installed.

Status of number range has not updated

Similar Messages

Maybe you are looking for