Status of particular WBS, whether complete or not with Dates?

Dear All,
Can any one tell me , how to know what is status of particular WBS with Dates , and T code for download Stagewise WBS with cost

Hi Krishnan,
<li>check the field ELIKZ "Delivery Completed" Indicator in EKPO table, if ELIKZ field is space then P.O is open and not Billed.
Thanks
Venkat.O

Similar Messages

Debit Note with Data Transfer

Hello
Is there any way to import debit notes, using the DTW??
Thanks
Jacobo

A Debit note actually translates to Debiting the BP and usually a Customer. So, you could import them as a Service type AR Invoice. Invoices template should be used.
Suda

Migrate the complete solution along with data from BW 2.x to BW 7.x

Dear Experts,
There is a scenario in which SAP BW 2.0 have been upgraded to 7.0 version, while the BW flow and the custom models that exists are still in 2.X version
We acquired separate SAP BW 7.4 powered by Hana , We would like to migrate the older version of BW i.e 7.0 with mentioned content and models into this new system with data and going forward our organization would like to have only one system and dismantle the old system . Please let us know the process in the form of steps as to how it can be achieved . Need your expert input on this .
Thx,

The below is my Proposed Solution
•Identify the list of Models & Objects which is required Migration eg: out of 100 Cubes only in Use 70 Cubes & Reports 150
•Migrate the models in System 1 (Old BW System)
•Create RFC from System 1 to System 2(New BW System)
•Transport Objects to System2
• Load the data from System 1 to system 2 using Open Hub/datamart
–If you have any Full load from ECC , Non SAP or Excel, no need to load the data from System 1 to System 2, you can load directly from source to system 2.
PLease Advise.........

PM Order Set status Complete "do not execute"

Hi experts,
i am searching for a fm to set system status of service order to complete do not execute. Can someone help me?
Thx

this FM will bring the status of the order:
tj02t will have status text..
tj02 will have the status..
CALL FUNCTION 'STATUS_READ'
EXPORTING
client = sy-mandt
objnr = p_objnr
only_active = 'X'
TABLES
status = lt_status
EXCEPTIONS
object_not_found = 1
OTHERS = 2.

Problem in catching the User status of a WBS Element

Hi All,
 In CJ20n transaction we need to catch the User status for a particular WBS element when it gets changed to 'Technically Completed(TECO)' so that we can create an asset.
 At present we are using the method 'AT_SAVE' of the BADI 'WORKBREAKDOWN_UPDATE' in which we are unable to catch the user status since the user status is not getting updated in the JEST table at that time.
 We have tried calling a function module in Update task but in that also the JEST table is not getting updated.
Please provide us the solution.
Thanks and Regards,
 Siva

Hi Siva,
Try the following BADIs
WBS_FIELDS_FOR_ASSET
WBS_MULTIPLE_ECP
If these do not solve your purpose, then there is a work around..
1). Goto the transaction CJ20n -> goto the User Status Screen -> On the User Status check box press F1 -> Goto technical information. Get the Structure and field name of the Status.
2). This structure will be filled up with the current value during the program execution. You can get the value from this Structure.
Hope it helps...
Lokesh

Project stock against a particular WBS element

How can i get the opening & closing stock value (not quantity) of project stock against a particular WBS element?
Regards,
Indranil

Hi,
Hiu2026
Im adding to above replies.
Prerequisites
You can only set the Closed status after Released status.
If u want to close the project/wbsu2026plz follow
Technically completed (TECO)
We can use this status for WBS elements that are completed from a technical point of view, but where you still expect costs to accrue.
Cj20nu2026Editu2026..Statusu2026.Complete technicallyu2026..set./undo(revoke)
Closed (CLSD)
We can use this status for a work breakdown structure or WBS element that has been completed from both a logistic and an accounting point of view.
Cj20nu2026.Editu2026..Statusu2026.Closeu2026..set./undo(revoke)
Both status can revoke.
Refer this link
http://help.sap.com/saphelp_erp60_sp/helpdata/en/a9/8a853488601e33e10000009b38f83b/frameset.htm
pherasath

One report to check status of project/wbs(TECO/REL)+ available budget

Dear All,
Please advice. Is there any report (one for all ) which can show Status of project/wbs + available budget of a project. I tried cns43, cn41 and report s_alr. But it shows in different tcode/report. Hopefully there is a standard report that can show these in one report.
Many thanks in advance.
Nies

CN41 shows the Current Budget and not Original Budget.
If Available Budget in your terms means difference between Current Budget and Actual, you can include a column 'Difference' from menu.
Select the Column Budget 1st, Menu Edit>Comparison> Choose Actual Cost.
The output shows the difference and percentage. Problem now is you can't view the status.I can't think of anything standard which exactly gives the ouput columns you are expecting.
Regards
Sreenivas

GR of Delivery completed item not possible for line item of PO/SA ?

Hi,
Am unable to Receive Goods in MIGO an Error - "GR of delivery completed item not possible for line item of PO/SA"?
Regards
Mohammed Khaja Pasha
+919550917395.

Hi Mohammed Khaja Pasha ;
Delivery Completed checkbox provides a lot of fonctionality like an additional delivery is not expected, but is possible. If you prevent posting of migo , you can benefit from system messages M7 163 and 254.
You want to ensure that the delivery is made before the planned delivery date : Set message 254.
You want to ensure last possible delivery date : Set message 163.
However ;
The open PO quantity of the PO item equals zero.
The PO item is no longer relevant for materials planning.
The PO item is ignored when letters urging delivery of overdue goods are generated.
The PO item can be deleted and archived.
You can specify whether the Delivery Completed checkbox is to be selected automatically.
Regards.
M.Ozgur Unal

Error "Status change from READY to COMMITTED is not allowed"

Dear experts,
once again SAPs workflow environment drives me crazy with mysterious error messages.
Some time ago I posted a question here concerning the problem that I cannot put back a workitem by using function module SAP_WAPI_PUT_BACK_WORKITEM due to a lock on this workitem which has been set right after it has been double clicked in the business workplace workflow inbox:
[How can I put back a workitem before I'm back in the business workplace?;
Since I do not want to dequeue the lock for the workitem in my application (where the user finds the appropriate detail information along with the function buttons for approval, rejection and F3/BACK) I tried it with calling a POPUP_TO_CONFIRM ("Do you want to put back the workitem?") directly from within the BO-method, right after returning from the FM that called my application. From here (the popup then shows in front of the business workplace instead of the application) the locking doesn't seem to be a problem any more! But whatever I do after the users decision to put the WI back - calling the FM SAP_WAPI_PUT_BACK_WORKITEM or trying to leave the method with macro EXIT_CANCELLED - leads to the error message "Status change from READY to COMMITTED is not allowed" and the workitem changes to status ERROR, too. This message seems to be bull***t, since the status of the item is supposed to go back to READY.
Does anybody have experience to help me on that ?
Thanks in advance
regards
Andreas

Hello Andreas,
Ah, sorry, there was so much talk about user decisions that I assumed you were using a standard decision task.
Still, I would be extra careful of changing the way workflow usually works because you have an unknown target audience that are based on the standard.
The standard SAP philosophy is quite simple: cancel/F3 or do nothing and it stays reserved. If you do not want it reserved, you need to perform an action. This is based on a majority of processes: in most cases when you execute a work item you will also be the one who is going to completed it. Replacing it is the lesser used of the two alternatives, therefore it is the only one that requires an action on the part of the user.
Again, this is intended as constructive input. Strange quirks and unusual behaviour tend to add a black mark to software if they do not make things easier to use. In many environments users are not even aware of the reserve/replace business, so there you would be adding an additional layer of complexity.
Personally I would find an exit popup annoying as a regular workflow user - regular decisions can be approved with one click, or I can back out with a single click if I need to make a phone call or look up some info before approving - but with this new-fangled thing I've got an extra button to click and an extra thing to think about. This is especially the case in a payment approval scenario where you may have users in some departments who may approve hundreds of payments each week.
My suggestion would be to leave it like that. By all means put an option into the user decision to put it back or to 'un-reserve' it (and loop round if the user chooses it). That way you are adding value and not clicks.
Cheers,
Mike

Not able to do GR for PO's , Delivery Completion Indicator Not Ticked

Hi ,
In SRM 5.0
Users Not able to do GR for PO's eventhough Delivery Completion Indicator Not Ticked , having Confirmation Roles
Either the PO is not appearing in the List or when they click the confirmation icon , the screen is not taking to the next screen to enter the quantity.
What all must be the probable reasons.
Thanks & Regards,

Hello,
You can check following things,
1. User in the PO should be correctly assigned in org without any sync errors(check users_gen)
2. Check in PO if the Confirmation/services performed tick is assigned properly.
3. Check if the PO in SRM and backend is correctly synchorinzed with PO in Ordered status.
4. Finally if there is any existing confirmation for the PO, then they can create the next confirmation only after the earlier conf is synchronized with backend, which means it would depend upon your schedule of clean_reqreq_up report.
Regards,
Sanjeev

How to make the status of a sales order complete of which PART DELIVERY

How to make the status of a sales order complete of which PARTIAL DELIVERY has already done. (Assigning rejection status not accepted)

Hi Gyana
There is no document with me. But I can confidently say that because I am using this functionality.
In my case I have created a Order Reason as "Short Closed". once you short close this order only the balance quantity gets rejected (provided you have already made previous delivery and PGI).
Try it in one of your test clients if you have. Once it is short Closed it wont also show in the orders due for processing in Production.
Also you can generate reports based on this if your customer wants to know how many order he has short closed, qty of item short closed etc.
Try it.
Rgds
Sunil

Reversing TECO status for Multiple WBS elements

Hi,
Question on setting and then reversing TECO status for a WBS element.
When a project is closed technically in project builder, all underlaying items (wbs, network/activity) are technically closed as well.
When you try to undo this, only the status of the top element is changed, not the underlaying items.
Is there any way in which we get the underlaying items changed as well (mass change is not an option)
Regards,
Jatinder Bansal

You can try two methods :-
1. Open project in project builder, Select project definition and then go to WBS Overview under project definition, now select all WBS Element and then undo TECO status. Now all the WBS status will be updated. But, this will not have any effect on network and its activities.
2. Open the project in planning board, now select all the objects, now undo the TECO status. This will change the status of all selected objects like WBS,Network and activites....

PREC-Approved Trips- Status from "to be Settled" to "Settled" Not Working

Hi all,
We have upgraded from 4.6C to ECC6.00.
We use Travel Management, and the payment happens through AP.
Trips are approved through WF approval.
Once Approved Status gets changed from -- Trip Completed .to be settled ====Trip Approved.to be settled.
Once after this there is a Mass Settlement that is run through Program RPRTEC00 -Transaction PREC.
So that status changed from -
Trip Approved to be settled =====Trip Approved Settled.
But this is not working in ECC 6.00 version, but this working in 4.6C.
This is working when i run a test run it is picking all Trips in PREC.But when i run an actual run it is not picking the trips to settle.
Is there is any thing that need to be done after ECC upgrade.?
Regard,
Rajesh

Hi all,
We have upgraded from 4.6C to ECC6.00.
We use Travel Management, and the payment happens through AP.
Trips are approved through WF approval.
Once Approved Status gets changed from -- Trip Completed .to be settled ====Trip Approved.to be settled.
Once after this there is a Mass Settlement that is run through Program RPRTEC00 -Transaction PREC.
So that status changed from -
Trip Approved to be settled =====Trip Approved Settled.
But this is not working in ECC 6.00 version, but this working in 4.6C.
This is working when i run a test run it is picking all Trips in PREC.But when i run an actual run it is not picking the trips to settle.
Is there is any thing that need to be done after ECC upgrade.?
Regard,
Rajesh

Cproject - PS replication. Incorrect status of transferred WBS elements

I am transferring unreleased phases and tasks from CProject to PS but in the PS all WBS elements have ==released== and ==master data lock== status. What settings should I check in order to keep the status in the PS same as in Cproject?

Hi Kiryl Bletsko,
in the cProject 4.0 there is unfortunetely no status mapping logic between cProject elements and the replicated WBS in the ERP PS. In other words, if the WBS elements are created, the status released (REL) and master data lock (MDLK). No standard functionality can change this system behaviour beside a Badi method, which has only the possibilty, not set the MDLK.
It is documented in the note 927960 & 1003599.
An own report to synchonize the status is from technical view no problem. If anyone has it, please post it.
Kind regards,
Zhenbo

HT3541 I'm not able to complete my billing with my credit card is there any other options

I'm not able to complete my billing with my credit card is there any other options

See
Why can’t I select None when I edit my Apple ID payment information?
and
Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
Step 3 is important, no matter whether you do this on a Mac or an iPad / iPhone:
Important: Before proceeding to the next step, you must download and install a free application. ...
Important: Before proceeding to the next step, you must download and install the free application by tapping Free followed by tapping Install App. …
First you must download a free app from the App Store. When you are asked to sign in with your Apple ID, select "Create new account". Accept the terms and conditions checkbox, then click Continue. After you enter all the requested personal data, click Continue.
When you are asked to select a payment method, select "None".
That's all there is to it.

Status of particular WBS, whether complete or not with Dates?

Similar Messages

Maybe you are looking for