Status of suceessfull execution of an action definition
Hi
We have configured in CRM 4.0 for Sales Order Transaction that when a new order is created , Order Acknowledgment an email output format has to be automatically triggered to the concerned partner through action profile.In the action profile -- the processing mode of this action definition is set as 'When saving the document" & the icon corresponding to this action text is set to green after successful execution. This can be view in Action Tab of Sales Order transaction.
In the same way , Order Status -- action definition is also schedule in action dialog box which can be triggered by manually, at the end after successful execution the icon is set to green.This can also be view in Action Tab of Sales Order transaction.
Now how through a customized report, how to track the orders in which these action definitions are successfully completed.
Though application log is available but not able to fetch the records corresponding to the Order.
Pls advice,
Thanks & Regards
Deb
Hi
Thanks a lot.
Basically the table PPFTTRIGG contains the records related to parent Order.
Using the records we can fetch the status of execution as per the requirement.
Thanks & Regards
Deb
Similar Messages
-
Geting Action Definition in SmartForm execution
Hello,
I use same smart form in different action definitions.
In the execution method of action definition (e.g. CRM_ACTIVITY_EXEC_SMART_FORM) I need to know which action definition (name) has been executed.
Available are smart form's name and the function name. How can I get the action definition it self?
Thanks for helpingHi Babu,
What is the start condition that you gave for the Action?
Also how are you able to check whether it is getting fulfilled or not?
Regards,
Saumya -
How to control Action Definition in mail format from not being executed
Dear Experts,
I have created one Action Definition having processing type "SMARTFORM Mail" to which status based start condition is given. The Action is getting executed evnthough the start condition is not satisfied.
Can any one plz explain me why this is happening and how to proceed further.
Regards,
Babu.Hi Babu,
What is the start condition that you gave for the Action?
Also how are you able to check whether it is getting fulfilled or not?
Regards,
Saumya -
Explanation for specific action definition of actionprofile AI_SDK_STANDARD
Hi!
Can anyone give me an explanation what the following action definitions of the action profile AI_SDK_STANDARD exactly do?
AI_SDK_SP_SEND_AUTO: Send messages automatically to SAP Service Backbone
AI_SDK_STANDARD_CONN_VIA_SAP: Customer Connection via SAP Service Backbone
AI_SDK_STANDARD_SECURE_AREA: Maintain SAP Logon Data
AI_SDK_STANDARD_UPDATE_SAP_AUT: Update Message from SAP Automatically
Thanks for your help.
Best regards,
AlexanderHi,
>
Alexander Barth wrote:
> AI_SDK_STANDARD_CONN_VIA_SAP: Customer Connection via SAP Service Backbone
To open connection to SAP to login and investigate. Normally you do this from Service.sap.com/access-support.
>
Alexander Barth wrote:
> AI_SDK_STANDARD_SECURE_AREA: Maintain SAP Logon Data
You maintain logon data for the SAP to login and investigate. Normally done from market place.
The remaining to I need to login and check, I don't have a system now. will update you soon.
Hope this answers some of your questions.
Feel free to revert back.
-=-Ragu -
Interrupted, exit status: c0000094 BR0272E Execution of program mkszip
Dear all,
I am facing following error when trying to take Full OFFLINE Backup through DB13.
BR0266E Program 'E:\usr\sap\PRD\SYS\exe\uc\NTAMD64\mkszip -c G:\ORACLE\PRD\SAPDATA2\SR3_19\SR3.DATA19 > G:\oracle\PRD\sapbackup\behtevwg\SR3.DATA19.Z' interrupted, exit status: c0000094
BR0272E Execution of program 'E:\usr\sap\PRD\SYS\exe\uc\NTAMD64\mkszip -c G:\ORACLE\PRD\SAPDATA2\SR3_19\SR3.DATA19 > G:\oracle\PRD\sapbackup\behtevwg\SR3.DATA19.Z' through pipe failed
BR0224E Compressing G:\ORACLE\PRD\SAPDATA2\SR3_19\SR3.DATA19 to G:\oracle\PRD\sapbackup\behtevwg\SR3.DATA19.Z failed due to previous errors
while kernel Release is 700 , patch level 236.
Regards,Dear Edoardo,
the version of BRTOOLS is:
BR0651I BRTOOLS 7.00 (44)
Patch Date Info
10 2006-01-05 BR*Tools fail due to SAP license problems (note 912969)
11 2006-01-11 Small functional enhancements in BR*Tools (note 914174)
13 2006-03-29 BR*Tools support for MDM databases (note 936665)
16 2006-08-11 BR*Tools start error: library libnnz10 not found (note 972136)
20 2006-11-24 Extended support for system copy in BR*Tools (note 1003028)
24 2007-03-01 BR*Tools support for Oracle 10g RAC (note 1033126)
25 2007-04-26 BR*Tools failing with ORA-01455 for database > 16 TB (note 1050
329)
26 2007-05-31 New BR*Tools command options (note 1060696)
36 2008-07-29 Small functional enhancements in BR*Tools (2) (note 1235952)
release note 849483
kernel release 700
patch date 2009-10-28
patch level 44
make platform NTAMD64
make mode OCI_10201_SHARE
make date Dec 14 2009 (44)
while mentioned SAP NOTE 896160 - BRBACKUP ignores file copy errors during disk backups have following solution.
Reason and Prerequisites
There are program errors in BRBACKUP 7.00 patch level 0 to 6
and BRBACKUP 6.40 patch level 25 to 34.
Solution
These errors are corrected in BRBACKUP 7.00 patch 9.
the status of brbackup on my PRD is BR0051I BRBACKUP 7.00
Regards, -
WebUI Print Preview (Action Definition - Print) for Adobe Interactive Forms
Hi All,
As mentioned in subject, how to define an CRM Action Definition (with or without Action Condition) to Print an Adobe Interactive Forms. We know how to define a setting for Print Preview function in CRM WebUI via Action Definition - Smartforms Print. Now we want to print preview from CRM WebUI document on Form designed in Adobe Interactive Forms (tx SFP).
We have tested using Action Definition - External Communication, we can set the AIF form here. We tested in GUI (tx crmd_order) and it works. But when testing preview on CRM WebUi it shows "Error in Smartforms".
Somehow it still detect as Smartforms instead of Adobe Interactive Forms.
We prefer if this preview can be done via Action, because it is straight forward function for printing.
Should we use Action - Method Call instead ? How is the approach to do it in Action - Method Call ?
Any one try this before? Appreciate your sharing here.
Thx & Rgds,
Gun.Hi Gunawan,
if I got you right, what you want is: Call your AIF when someone clicks on the "print preview" button in CRM WebClient. This should all work using a print action like with normal SmartForms.
I faced this problem some months ago on CRM 6. The problem here was quite simple: The SmartForm interface and the one of AIF are not compatible. Thus the service used for calling the print action from WebClient failed.
For handling this problem I enhanced the print service to call AIF correctly.
In customizing I used print actions that call a method.
As mentioned this lays back some months already. Maybe SAP came up with a better solution by now. I saw AIF to have multilple interface types. One is an interface compatible with SmartForms. Probably you can use this one and the print service will work without any enhancements or modifications.
cheers Carsten -
Extended events /actions definitions
One of the shortcomings I seem to keep stumbling across is that event action definitions are no where to be found. I've been searching for weeks and can't find a resource from Microsoft which helps me understand the official definition for an action.
Has someone here found that resource or know where it is?If you are talking about the descriptions of what they collect, then indeed the DMVs are the best place at hand currently still.
Example query:
-- XE Actions
SELECT dm_xe_packages.name AS package_name,
dm_xe_objects.name AS source_name,
dm_xe_objects.description
FROM sys.dm_xe_objects AS dm_xe_objects
INNER JOIN sys.dm_xe_packages AS dm_xe_packages
ON dm_xe_objects.package_guid = dm_xe_packages.guid
WHERE
(dm_xe_packages.capabilities IS NULL OR dm_xe_packages.capabilities & 1 = 0)
AND (dm_xe_objects.capabilities IS NULL OR dm_xe_objects.capabilities & 1 = 0)
AND dm_xe_objects.object_type = 'action'
If you want to undestand the Extended Events Architecture more deeply I can recommend this article by Jonathan Kehayias:
Using SQL Server 2008 Extended Events
Andreas Wolter (Blog |
Twitter)
MCSM: Microsoft Certified Solutions Master Data Platform, MCM, MVP
www.SarpedonQualityLab.com |
www.SQL-Server-Master-Class.com -
How to find action definition from zclass
Hi,
As soon as a action is triggered from a transaction i am calling a method which is present in Z class from the action. In that method how can i find out like which action definition is triggering this method.
Thanks.Hi Azaz,
SPRO -> Customer Relationship Mgmt -> Basic Functions -> Actions -> Change Actions & Conditions -> Define Action Profiles & Actions
Enter the name of the Action Profile and click on Action Definition -> Processing Types.
In the 'Print Settings' you will find the Processing Method, Class.
Reward points if helpful.
Regards,
Sumeet -
Status Synchronization in Portfolio Item to Project Definition
Dear Gurus;
This is my first time in custom the Synchronization andi need help to make this "Status Synchronization"in Portfolio Item to Proyect Definition.
I know that i can make this in the follow SPRO:
1. Maintain DFM Business Transactions
2. Map Business Transactions for Synchronization
3. Synchronous and Asynchronous Status Synchronization
4. Map DFM Business Transactions to Project / Initiative Business Transaction
5. Map Portfolio Management Status to DFM Business Transaction
6. Map DFM Business Transaction to Portfolio Management Status
I made all of this configuration but still not work.
Please help.
Regards,
MarianoHi Santhosh;
First of all, you have to know that the function of Portfolio Status (Item or Decision Point) are "User Status" and in Project Status (Project definition and Phases) are "System Status", you can't configure Portfolio User Status to the Project User Status.
For Example: I have been setting the Item User Status "Suspended" that are synchronized to the Project System Status "Canceled", and it's worked fine.
Do this steps:
1) Maintain DFM Business Transactions -> don't touch this (SAP standard)
2) Map Business Transactions for Synchronization -> don't touch this (SAP standard)
3) Map Project / Initiative Business Transaction to DFM Business Transaction -> Here you have to map the source bus transaction to the DFM bus transaction (are the same).
PDCP PPO DX05 DFM5
4) Map Portfolio Management Status to DFM Business Transaction -> It's the same as point 3, but in reverse.
PDCP PPO DFM5 DX05
5) Map Portfolio Management Status to DFM Business Transaction -> Here you have to set the old status to the new status (i used to define the Item Status to he DFM Business transaction).
PPO Item PDCP 185 190 DFM5
6) Map DFM Business Transaction to Portfolio Management Status -> It's the same as point 5, but in reverse.
PPO Item PDCP DFM5 190
Hope this help you.
Best regards.
Mariano -
WHAT DOES "Action definition" mean?
hi,experts
i encounterd a problem with adobe printing, and i'm just a beginner at netweaver 2004s. i got the message type 'Z' and the Action Definition 'Z', so what does the action definition mean? is it connected to a program which fetchs the data and formats the output? if it is,how can i find the program?
pls help me,any suggestion will be rewarded.
thanks in advance.Speech bubbles come up showing the destination of links, if you hold your finger on a link in Safari.
It may be some kind of javascript link? -
Processing Types for Action Definition (GTS version 10.1)
Hi Friends/Experts
In PPF settings, for Processing Types for Action Definition US_CU_EX_CUSEX_M_UAES2 Processing settings are not being loaded. It shows the permitted processing type for action as Method Call but the Set Processing box is not being displayed. What could be the reason and how can I fix this/
Appreciate quick response.
Thanks
Keshav MurthyHi Dave
Well I it was not with an intent to change any settings. By default it should have been displayed and as I did not see it there, wanted to know how did that disappear! and was not sure if it would have any impact while processing any messages for declaration.
Keshav -
System is not allowing me to use the same action defintion in more than one Action profile. can somebody explain the logic behind this?
I want to use the Action ZSEND_EMAIL with different smartforms in multiple Action profiles and the Action determination will pick the Action profile based on Sales org.
Regards,
ShaikHi,
I agree this is the standard behaviour in SAP CRM, not sure about the reason.
But I dont see any harm in using different Action Definition Ids since the respective Description/Text could be as per you requirement as that is what appears to the user in WebUI/GUI.
Although if you find out the reason, request you to share the same.
Regards,
Vartika -
How to get status of last execution of a scheduler job
Hi,
I am trying to write a pl/sql code that can manually the scheduler job (one time type/ not a repetitive) which are in retry scheduled state.
even after execution is successfull job is not dropped even if i set auto_drop to true.
I need some way to capture execution status of dbms_scheduler.run_job('job_name');. based on which i can manually drop the job if it is successfull.
taking the value from dba_scheduler_job_run_details doesn't seem to be good option as there may be multiple logs and we don't what time interval we need to match.
can anybody help me in this.
Thanks in advance.Hi,
I'm a little confused at what is happening. It sounds like the following is the case
- You have created a run-once job and set restartable to TRUE and auto-drop to TRUE. It has failed a few times and is now in the RETRY SCHEDULED STATE .
- Now you have fixed the issue and want to force a rerun and drop the job if it has succeeded.
If this is the case you have several options.
- just wait until the job has retried itself, you can see the next scheduled date in the dba_scheduler_jobs view
- use dbms_scheduler.run_job(use_current_session=>false) . You will have to monitor dba_scheduler_job_run_details to see the status of the job run but you can easily use log_date to figure out which row is your row. Just select the row with log_date > sysdate when you called run_job. If that run succeeds, you will manually need to call drop_job.
- use dbms_scheduler.run_job(use_current_session=>true) . Because this runs the job action in the foreground it will hang until the job action has finished. Any error will be thrown as a foreground PL/SQL error. If there is no error, the action has succeeded and you can go ahead and do a drop_job.
Hope this helps,
Ravi. -
Change status of Follow-Up with an action profile
Hi,
I would like to create an action profile for the following function:
After creating an opportunity with a Follow-UP (quotation), I would like to change the status of the quotation if the opportunity is saved.
Is there any BADI which provides such a functionality?
Has anyone an idea for solving that problem?
Thanks in advance.
Regards,
NicoleHi Masthan,
yes, I solved that problem.
There isn't any BADI which provides this functionality, you have to implement it on your own. (new BAdI under SPRO -> CRM -> Basic Functions -> Actions -> Actions in Transactions -> BAdI Processing Methods)
Regards,
Nicole -
How does Status column in Execution Window get set?
Thanks to Jonathan for the reply to my last post.
I have a couple of inter-related questions on step-types. I understand the difference between a Pass/Fail step type and a Numeric Limit step type is that the code module being executed in one case returns a Boolean whereas the code in the other case returns a numeric.
I looked at the "Edit LabVIEW VI Call" dialog for a LabVIEW Pass/Fail step type and I noticed that the Boolean passed by the connector pane went to "Step.Result.PassFail" in TestStand.
Q1. What exactly is "Step.Result.PassFail" called? Is it a "Parameter", a "Variable", or simply the property of the "Step" object? In other words, how would I refer to it in a discussion?
Q2. If it IS a parameter, then when I use the expression browser in the "Edit LabVIEW VI Call", why do I see ANOTHER object (at the same level as "Step") called "Parameters"? I do realize that this "Parameters" object does not contain anything until run-time.
From the viewpoint of a sequence itself, eventually each of these steps (Numeric Limit OR Pass/Fail) lead to a Passed or Failed (or Skipped) result as we see in the Execution Window.
Q3. I assumed that that result in the Execution window is tied to "Step.Result.PassFail". Is that true?
With that in mind I studied the "Status Expression" for a Numeric Limit Test and this is what I found:
CheckLimits(Step.DataSource == "Step.Result.Numeric" ? Step.Result.Numeric : (Step.Result.Numeric = Evaluate(Step.DataSource)), step.limits.high, step.limits.low, step.comp)
Q4. There is no mention of Step.Result.PassFail in the expression above. Why not? In other words, how does the comparison with limits get translated to the Status column in the Execution Window?
Thank you.Hi 2and4,
Answer to Q1: Its a property of the Step or Result, depends where you are referencing from. If you are unsure then quote the lookup string eg "Step.Result.PassFail".
Answer to Q2: You are probably referring to the Parameters which belongs to the active sequence you have displayed in the sequence editor. Its empty because you have no Parameters defined in the sequence. Try this, in your active sequence, select the Parameters tab. Insert a Parameter, it doesn't matter what it is. Now view the Sequence Context by the Expression Browser. You should now is a + sign next to Parameter. Expand this and you will see you Parameter you inserted.
Answer to Q3: Yes, the actual result or status is in Step.Result.Status which is a String. This can be "Passed", "Failed", "Error", "Done"
Answer to Q4: If you look at the Status Expression for the PassFail step, you will see it has a different expression. The PassFail doesn't do any limit checking. If Step.Result.PassFail is True then the step passes and if False it fails. It's that simple.
I hope this helps.
Regards
Ray Farmer
Regards
Ray Farmer
Maybe you are looking for
-
Custom Icon for iPhone Home Screen
Does anyone know if there's a way to upload an icon to the site so that people can add it to their iPhone home screens? Thanks!
-
User ID is blank in the SAPLOGONTICKET
Hello All, I'm dealing with a very strange issue of SSO between Portal (SP11) and R/3 system. Everything was working fine and we had to restart the Portal system for some reason. After the Portal restart, SSO stopped working. Now i have configured ev
-
Can print from HP printer assistant but not from windows
I ran the basic driver setup for my wireless printer. Everything looked OK. I then tried to print a test page from the control panel printer properties page. The document was shown as printing but nothing printed. I also had the same results when
-
W540 - boot from second hard drive?
Morning, I've recently got an ultrabay adapter and wanted to know if I could run two separate OSs, one from each hard disc. Effectively, I would like to have one version of windows on the internal HDD for general day to day stuff and one as a program
-
Solaris 10 inst. doesn't find cd2-cd4 on amd64
Hi! I've got a amd64 (winchester 3G2), 1GB, ATI 9200SE. The installation proceeds nicely until I get a: Please insert the CD/DVD for Solaris 10 Software 2 for x86 Platforms I try with all of the four cd:s I downloaded but with no luck. Relucantly I p