Status : Off line
When I boot my system with the drives attached to the Serial ATA RAID connectors, the Bios will detect the drives atteched and show the following screen. scanning IDE drives then it show status: Off line flashing. ?(
so I reboot it, show status: Functional 8o
I turn off my computer for mins. then I boot it up and show status: off line :O
reboot again show: Functional ?(
samething happen an over and over again.
Is this Motherboard is bad or bios bad or both??
help!!!!!! :(
thank
Darkstalker
P.S.
I bought new Motherboard three week old.
Quote
Originally posted by wonkanoby
what drives how jumpered,what sata convertors you using
what vga card,full psu details
Western Digital (two) 40GB Ultra ATA 100
one in on IDE 3 other is on SATA with Serial ATA to Ultra ATA adapter
G-Force 4 MX 440
P/S 450 watt
Similar Messages
-
Cucm replication status Off-Line
Hello Everyone!!!
I've faced to strange issue. I have 1 publisher and 6 subscribers. After reinstalling one of subscribers, database replication status of this
subscriber shows 4. Unified CM Database Status shows that files hosts, rhosts, sqlhosts are ok.
In Replication Server List (cdr list serv) reinstalled subscriber contain nothing. And it doesn't appear in another subscribers.
All other subscribers including publisher have database replication status 2.
Maybe anyone have idea how to solve this problem?If the standard dbreplication stop on subscribers, then publisher, then reset all from the publisher doesn't do the job (and by the way replication will take awhile before the subscriber status turns to 2, you can see progress under utils dbreplication runtimestate), then I would suggest using clusterreset on the publisher (use Cisco documentation to see how this is done). But this is only if you see that you can't get it working for you with the standard solution.
I had similar problems not long ago after reinstalling a publisher, sometimes replication needs a bit of tough love :) After stopping replication on all subscribers, then publisher, then performing clusterreset on Publisher and tailing the log file to see when it's done (a few hours), I reset the replication and the cluster was good to go. -
Mail in 10.7.5 suddenly off line on all my devices....HELP
iMac (24-inch Early 2008) running OS 10.7.5
MacBook Pro (15-inch Mid 2010) running OS 10.7.5
iPad 2 (wifi) running iOS 6.1.3
iPad 4 (wifi) running iOS 6.1.3
Here's the problem. I have internet connection. But suddenly today all my devices are off line in Mail.
Have re-set my dsl modem multiple times.
Ran Connection Doctor and got red lights on all 4 of my mail accounts (iCloud, 2x verizon addresses, and a work email address)
Checked all the settings and as far as I can figure, the are what I have been using.
EXCEPT......when I open the EDIT OUTGOING SERVER area of the Mail preferenced for my iCloud account, it choses my work account server. I re-set and save it. But it's right back to the wrong server when I go back to check. WHAT"S UP with that??????
Anybody have any insights into this problem?
Yes, I can get my email on the individual websites, but that means signing on and off of 4 websites every 15 minutes or so. Not gonna work.
Thanks for any suggestions.
Signed,
Tearing my hair outHello Snappi,
Thank you for all the information you provided about what is going on with Mail on all your Apple Devices. I found an article with steps that I think might help.
I recommend reviewing the article, but I found some steps that sound like they apply specifically to what you are experiencing in the section titled "Mail Connection Doctor shows one or more red dots in the account Status column>Click here if your Incoming and Outgoing email account settings are correct, but the issue persists>Click here if a 'Could not connect to this (server type) server…' message appears":
Click here if a "Could not connect to this (server type) server…" message appears
Check for third-party firewall software
Third-party firewall software, such as Little Snitch or Symantec Norton Personal Firewall, could be blocking the necessary ports. If such software is installed, make sure the firewall is not blocking these ports:
ports 25, 465, and 587 (for sending email via SMTP)
ports 143 and 993 (if you use IMAP email)
ports 110 and 995 (if you use POP email)
If you're not sure how to enable the correct ports, try disabling the third-party firewall completely, then test for the Mail issue. Note: The Mac OS X v10.6 firewall does not interfere with ports needed to send email.
Check for Internet Service Provider port blockingYour Internet Service Provider may be blocking the SMTP ports needed to send email.You can use Apple's MobileMe service to find out if your Internet Service Provider is blocking the sending email protocol SMTP:
Open Network Utility in the Utilities folder—in Finder, choose Go > Utilities (or press Shift-Command-U).
Click the "Port Scan" tab.
Enter "smtp.me.com" in the "Enter an Internet or IP address to scan for open ports" field.
Enable "Only test ports between _ and _", and enter 25 for both port fields.
Click "Scan" to test.
If you do not see "Open TCP Port: 25 smtp", contact your Internet Service Provider or visit their support website for further assistance. If you do see "Open TCP Port: 25 smtp", your Internet Service Provider is not blocking the SMTP ports needed to send email. Go to the "'Trying to log in to this (email server provider name) account failed…' message or any other error message appears" section below if the email issue persists.
You can find the full article here:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Thank you for posting in the Apple Support Communities.
Best,
Sheila M. -
Found 0 results for My browser is missing important items, the whole tool bar...., drop down menu to print, copy, work off line, file, save, book mark, history. I just installed latest foxfire on windows xp. Found some instructions but they called for using keys my computer doesn't have ( key in OSX There is no file, edit , history, help, tools, navigation, all the things your directions say to use. Also I always get hung up and the message a scrip is running. I don't know what thises scrips are but I sure don't need them.
== This happened ==
Every time Firefox opened
== I just noticed it. It probably happened when I upgraded foxfire.<u>'''Can't see the Menu Bar'''</u> (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(Linux & OSX see: [[Menu bar is missing]] )''
<u>''Windows'' Method 1.</u> '''''Hold down''''' the key and press the following letters in this exact order: V T M
<u>''Windows'' Method 2.</u> Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
<u>'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars'''</u> under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
<u>'''To display the Status Bar'''</u>, View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
<u>'''Full Screen mode'''</u>
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]''' -
What to do with off line datafile?
Hi,
On prod db (9.2) with still space in ts I created a new data file. (There were 5 other files here).
Realized it's named incorrectly I placed the data file immediately off line.
Currently the status is: "Needs Recovery" (db is running in arch log mode).
I'm wondering what are my options dealing with the situation?
(We don't use Oracle Managed Files option).
The db is 24/7 the ts is an index ts (12 GB).
Are there any perils of keeping the file off line for the future?
What could be done with data file off line:
-Can I move it?
-Resize it?
-Rename ?
Is there a way to recover w/o placing the ts off line?
Any suggestions are highly appreciated!
Thx,
DobbyYou can bring it easily online:
[email protected]> select file_name from dba_data_files where tablespace_name = 'RECOVERY_TEST'
2 /
FILE_NAME
C:\ORACLE\ORADATA\MOB92\RECOVERY_TEST01.DBF
C:\ORACLE\ORADATA\MOB92\RECOVERY_TEST02.DBF
[email protected]> alter database datafile 'C:\ORACLE\ORADATA\MOB92\RECOVERY_TEST02.DBF' offline;
Database altered.
[email protected]> create table semp tablespace RECOVERY_TEST as select * from scott.emp;
Table created.
[email protected]> select * from v$recover_file;
FILE# ONLINE ONLINE_ ERROR CHANGE# TIME
13 OFFLINE OFFLINE 71930663 03-SEP-06
This will not suceed:
[email protected]> alter database datafile 'C:\ORACLE\ORADATA\MOB92\RECOVERY_TEST02.DBF' online;
alter database datafile 'C:\ORACLE\ORADATA\MOB92\RECOVERY_TEST02.DBF' online
ERROR at line 1:
ORA-01113: file 13 needs media recovery
ORA-01110: data file 13: 'C:\ORACLE\ORADATA\MOB92\RECOVERY_TEST02.DBF'
Here you recover datafile:
[email protected]> recover datafile 13;
Media recovery complete.
and now you can place it online:
[email protected]> alter database datafile 'C:\ORACLE\ORADATA\MOB92\RECOVERY_TEST02.DBF' online;
Database altered.
[email protected]> select * from v$recover_file;
no rows selected
Best regards
Krystian Zieja / mob -
Quicktime 7.4 upgrading error: server off-line?
Hi Guys, hope someone would be able kindly to advise me on this. Yesterday I have upgraded my Quicktime to version 7.4 by downloading free version from Apple web-site (originally I had a 6.xx.xx version installed from my photo-camera software). Before the installation I’ve deleted the previous file version. The problem I’m experiencing now is that when I start the Quick Time by clicking on it, it stops (freezing) in the loading status and looks like not connecting to where it attempts to. Then if I am choosing in the menu bar to update the existing software, the following error message comes up:
A connection with the Quick Time software server could not be established. The computer may be having trouble accessing the internet or the server may be off-line”.
But my internet is surely connected and I was able to successfully update earlier program version. I’ve tried re-installing a couple of times, but nothing changes. Would it be better again to install the older version file then? Can anyone please give me a hand with this?Hi Guys, as I can't see many responses in this forum, can someone who's using QT 7.2 with Windows please do me a huge favour and just try to go for Update Existing and let me know if it is working. Looks like I have the same issue on other machine with elder version (6.1), what appears to be really strange.
-
Hi,
<i><b><u>Environment; SAP ECC6, Oracle, window server 2003</u></b></i>
Other day I scheduled OFF LINE Backup through DB13, but it did not work. It ran just for a second. Detail Log shows no error message. It also create file .lock.brb in E:\oracle\DEV\sapbackup folder.
I never had success taking OFFLINE backup through DB13 but I can take this backup by BRTOOLS*. Please help me with this, looking at detail Log file below;
Detail log: bdwholho.afd
BR0051I BRBACKUP 7.00 (18)
BR0055I Start of database backup: bdwholho.afd 2007-10-05 18.15.28
BR0477I Oracle pfile D:\oracle\DEV\102\database\initDEV.ora created from spfile D:\oracle\DEV\102\database\spfileDEV.ora
BR0101I Parameters
Name Value
oracle_sid DEV
oracle_home D:\oracle\DEV\102
oracle_profile D:\oracle\DEV\102\database\initDEV.ora
sapdata_home E:\oracle\DEV
sap_profile D:\oracle\DEV\102\database\initDEV.sap
backup_mode ALL
backup_type offline_force
backup_dev_type disk
backup_root_dir E:\oracle\DEV\sapbackup
compress yes
compress_cmd D:\usr\sap\DEV\SYS\exe\nuc\NTI386\mkszip -c $ > $
exec_parallel 0
system_info SAPServiceDEV QA Windows 5.2 Build 3790 Service Pack 1 Intel
oracle_info DEV 10.2.0.2.0 8192 2031 30773325 QA WE8DEC UTF8
sap_info 700 SAPSR3 DEV TEMPLICENSE R3_ORA INITIAL
make_info NTintel OCI_10201_SHARE Oct 30 2006
command_line brbackup -u / -jid ALLOF20071005181500 -c force -t offline_force -m all -p initDEV.sap
BR0116I ARCHIVE LOG LIST before backup for database instance DEV
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination D:\oracle\DEV\oraarch\DEVarch
Archive format ARC%S_%R.%T
Oldest online log sequence 2028
Next log sequence to archive 2031
Current log sequence 2031 SCN: 30773325
Database block size 8192 Thread: 1
Current system change number 30797874 ResetId: 606578588
BR0118I Tablespaces and data files
Tablespace TS-Status F-Status File Size Id. Device Link Type MaxSize IncrSize BlkSize
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA1\SR3_1\SR3.DATA1 2097160192 4 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA1\SR3_2\SR3.DATA2 2097160192 5 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 2097160192 6 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA1\SR3_4\SR3.DATA4 2097160192 7 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA1\SR3_5\SR3.DATA5 2097160192 8 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA2\SR3_10\SR3.DATA10 2097160192 13 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA2\SR3_6\SR3.DATA6 2097160192 9 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7 2097160192 10 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA2\SR3_8\SR3.DATA8 2097160192 11 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA2\SR3_9\SR3.DATA9 2097160192 12 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA3\SR3_11\SR3.DATA11 2097160192 14 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA3\SR3_12\SR3.DATA12 2097160192 15 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA3\SR3_13\SR3.DATA13 2097160192 16 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA3\SR3_14\SR3.DATA14 2097160192 17 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA3\SR3_15\SR3.DATA15 2097160192 18 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA4\SR3_16\SR3.DATA16 2097160192 19 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA4\SR3_17\SR3.DATA17 2097160192 20 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA4\SR3_18\SR3.DATA18 2097160192 21 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA4\SR3_19\SR3.DATA19 2097160192 22 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA4\SR3_20\SR3.DATA20 2097160192 23 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA1\SR3700_1\SR3700.DATA1 2097160192 24 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA1\SR3700_2\SR3700.DATA2 2097160192 25 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA1\SR3700_3\SR3700.DATA3 2097160192 26 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA1\SR3700_4\SR3700.DATA4 2097160192 27 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA2\SR3700_5\SR3700.DATA5 2097160192 28 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA2\SR3700_6\SR3700.DATA6 2097160192 29 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA2\SR3700_7\SR3700.DATA7 2097160192 30 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA2\SR3700_8\SR3700.DATA8 2097160192 31 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA3\SR3700_10\SR3700.DATA10 2097160192 33 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA3\SR3700_11\SR3700.DATA11 2097160192 34 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA3\SR3700_12\SR3700.DATA12 2097160192 35 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA3\SR3700_9\SR3700.DATA9 2097160192 32 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA4\SR3700_13\SR3700.DATA13 2097160192 36 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA4\SR3700_14\SR3700.DATA14 2097160192 37 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA4\SR3700_15\SR3700.DATA15 2097160192 38 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA4\SR3700_16\SR3700.DATA16 2097160192 39 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3USR ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA1\SR3USR_1\SR3USR.DATA1 20979712 40 4 NOLINK FILE 10485760000 20971520 8192
PSAPTEMP ONLINE# ONLINE+ E:\ORACLE\DEV\SAPDATA2\TEMP_1\TEMP.DATA1 2097160192 -1 4 NOLINK FILE 10485760000 20971520 8192
PSAPUNDO ONLINE- ONLINE+ E:\ORACLE\DEV\SAPDATA3\UNDO_1\UNDO.DATA1 4466941952 2 4 NOLINK FILE 10485760000 20971520 8192
SYSAUX ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA1\SYSAUX_1\SYSAUX.DATA1 272637952 3 4 NOLINK FILE 10485760000 20971520 8192
SYSTEM ONLINE* SYSTEM+ E:\ORACLE\DEV\SAPDATA1\SYSTEM_1\SYSTEM.DATA1 859840512 1 4 NOLINK FILE 10485760000 20971520 8192
BR0119I Redo log files
File Size Group Device Status Link Type
F:\ORACLE\DEV\ORIGLOGA\LOG_G11M1.DBF 52429312 1 5 INUSE NOLINK FILE
D:\ORACLE\DEV\MIRRLOGA\LOG_G11M2.DBF 52429312 1 3 INUSE NOLINK FILE
F:\ORACLE\DEV\ORIGLOGB\LOG_G12M1.DBF 52429312 2 5 INUSE NOLINK FILE
D:\ORACLE\DEV\MIRRLOGB\LOG_G12M2.DBF 52429312 2 3 INUSE NOLINK FILE
F:\ORACLE\DEV\ORIGLOGA\LOG_G13M1.DBF 52429312 3 5 INUSE NOLINK FILE
D:\ORACLE\DEV\MIRRLOGA\LOG_G13M2.DBF 52429312 3 3 INUSE NOLINK FILE
F:\ORACLE\DEV\ORIGLOGB\LOG_G14M1.DBF 52429312 4 5 INUSE NOLINK FILE
D:\ORACLE\DEV\MIRRLOGB\LOG_G14M2.DBF 52429312 4 3 INUSE NOLINK FILE
BR0120I Control files
File Size Id. Device Link Type
F:\oracle\DEV\origlogA\cntrl\cntrlDEV.dbf 12664832 0 5 NOLINK FILE
F:\oracle\DEV\origlogB\cntrl\cntrlDEV.dbf 12664832 0 5 NOLINK FILE
E:\oracle\DEV\sapdata1\cntrl\cntrlDEV.dbf 12664832 0 4 NOLINK FILE
Thanks..
Regards,
Marej KhanHi,
Iam reposting OFF LINE Backup detail log and this is complete, end on the same line as you have mentioned i.e E:\oracle\DEV\sapdata1\cntrl\cntrlDEV.dbf 12664832 0 4 NOLINK FILE, seems like it is not complete Log but it is and there is no Error message or Red Lines for failure.
Detail log: bdwjadfg.afd
BR0051I BRBACKUP 7.00 (18)
BR0055I Start of database backup: bdwjadfg.afd 2007-10-13 10.15.48
BR0477I Oracle pfile D:\oracle\DEV\102\database\initDEV.ora created from spfile D:\oracle\DEV\102\database\spfileDEV.ora
BR0101I Parameters
Name Value
oracle_sid DEV
oracle_home D:\oracle\DEV\102
oracle_profile D:\oracle\DEV\102\database\initDEV.ora
sapdata_home E:\oracle\DEV
sap_profile D:\oracle\DEV\102\database\initDEV.sap
backup_mode ALL
backup_type offline_force
backup_dev_type disk
backup_root_dir E:\oracle\DEV\sapbackup
compress yes
compress_cmd D:\usr\sap\DEV\SYS\exe\nuc\NTI386\mkszip -c $ > $
exec_parallel 0
system_info SAPServiceDEV QA Windows 5.2 Build 3790 Service Pack 1 Intel
oracle_info DEV 10.2.0.2.0 8192 2076 31431371 QA WE8DEC UTF8
sap_info 700 SAPSR3 DEV TEMPLICENSE R3_ORA INITIAL
make_info NTintel OCI_10201_SHARE Oct 30 2006
command_line brbackup -u / -jid ALLOF20071013101500 -c force -t offline_force -m all -p initDEV.sap
BR0116I ARCHIVE LOG LIST before backup for database instance DEV
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination D:\oracle\DEV\oraarch\DEVarch
Archive format ARC%S_%R.%T
Oldest online log sequence 2073
Next log sequence to archive 2076
Current log sequence 2076 SCN: 31431371
Database block size 8192 Thread: 1
Current system change number 31443715 ResetId: 606578588
BR0118I Tablespaces and data files
Tablespace TS-Status F-Status File Size Id. Device Link Type MaxSize IncrSize BlkSize
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA1\SR3_1\SR3.DATA1 2097160192 4 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA1\SR3_2\SR3.DATA2 2097160192 5 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 2097160192 6 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA1\SR3_4\SR3.DATA4 2097160192 7 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA1\SR3_5\SR3.DATA5 2097160192 8 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA2\SR3_10\SR3.DATA10 2097160192 13 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA2\SR3_6\SR3.DATA6 2097160192 9 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7 2097160192 10 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA2\SR3_8\SR3.DATA8 2097160192 11 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA2\SR3_9\SR3.DATA9 2097160192 12 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA3\SR3_11\SR3.DATA11 2097160192 14 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA3\SR3_12\SR3.DATA12 2097160192 15 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA3\SR3_13\SR3.DATA13 2097160192 16 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA3\SR3_14\SR3.DATA14 2097160192 17 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA3\SR3_15\SR3.DATA15 2097160192 18 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA4\SR3_16\SR3.DATA16 2097160192 19 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA4\SR3_17\SR3.DATA17 2097160192 20 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA4\SR3_18\SR3.DATA18 2097160192 21 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA4\SR3_19\SR3.DATA19 2097160192 22 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA4\SR3_20\SR3.DATA20 2097160192 23 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA1\SR3700_1\SR3700.DATA1 2097160192 24 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA1\SR3700_2\SR3700.DATA2 2097160192 25 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA1\SR3700_3\SR3700.DATA3 2097160192 26 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA1\SR3700_4\SR3700.DATA4 2097160192 27 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA2\SR3700_5\SR3700.DATA5 2097160192 28 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA2\SR3700_6\SR3700.DATA6 2097160192 29 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA2\SR3700_7\SR3700.DATA7 2097160192 30 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA2\SR3700_8\SR3700.DATA8 2097160192 31 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA3\SR3700_10\SR3700.DATA10 2097160192 33 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA3\SR3700_11\SR3700.DATA11 2097160192 34 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA3\SR3700_12\SR3700.DATA12 2097160192 35 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA3\SR3700_9\SR3700.DATA9 2097160192 32 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA4\SR3700_13\SR3700.DATA13 2097160192 36 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA4\SR3700_14\SR3700.DATA14 2097160192 37 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA4\SR3700_15\SR3700.DATA15 2097160192 38 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA4\SR3700_16\SR3700.DATA16 2097160192 39 4 NOLINK FILE 10485760000 20971520 8192
PSAPSR3USR ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA1\SR3USR_1\SR3USR.DATA1 20979712 40 4 NOLINK FILE 10485760000 20971520 8192
PSAPTEMP ONLINE# ONLINE+ E:\ORACLE\DEV\SAPDATA2\TEMP_1\TEMP.DATA1 2097160192 -1 4 NOLINK FILE 10485760000 20971520 8192
PSAPUNDO ONLINE- ONLINE+ E:\ORACLE\DEV\SAPDATA3\UNDO_1\UNDO.DATA1 4466941952 2 4 NOLINK FILE 10485760000 20971520 8192
SYSAUX ONLINE* ONLINE+ E:\ORACLE\DEV\SAPDATA1\SYSAUX_1\SYSAUX.DATA1 272637952 3 4 NOLINK FILE 10485760000 20971520 8192
SYSTEM ONLINE* SYSTEM+ E:\ORACLE\DEV\SAPDATA1\SYSTEM_1\SYSTEM.DATA1 859840512 1 4 NOLINK FILE 10485760000 20971520 8192
BR0119I Redo log files
File Size Group Device Status Link Type
F:\ORACLE\DEV\ORIGLOGA\LOG_G11M1.DBF 52429312 1 5 INUSE NOLINK FILE
D:\ORACLE\DEV\MIRRLOGA\LOG_G11M2.DBF 52429312 1 3 INUSE NOLINK FILE
F:\ORACLE\DEV\ORIGLOGB\LOG_G12M1.DBF 52429312 2 5 INUSE NOLINK FILE
D:\ORACLE\DEV\MIRRLOGB\LOG_G12M2.DBF 52429312 2 3 INUSE NOLINK FILE
F:\ORACLE\DEV\ORIGLOGA\LOG_G13M1.DBF 52429312 3 5 INUSE NOLINK FILE
D:\ORACLE\DEV\MIRRLOGA\LOG_G13M2.DBF 52429312 3 3 INUSE NOLINK FILE
F:\ORACLE\DEV\ORIGLOGB\LOG_G14M1.DBF 52429312 4 5 INUSE NOLINK FILE
D:\ORACLE\DEV\MIRRLOGB\LOG_G14M2.DBF 52429312 4 3 INUSE NOLINK FILE
BR0120I Control files
File Size Id. Device Link Type
F:\oracle\DEV\origlogA\cntrl\cntrlDEV.dbf 12664832 0 5 NOLINK FILE
F:\oracle\DEV\origlogB\cntrl\cntrlDEV.dbf 12664832 0 5 NOLINK FILE
E:\oracle\DEV\sapdata1\cntrl\cntrlDEV.dbf 12664832 0 4 NOLINK FILE -
I updated to Maverick and now my outgoing gmail server states it is off line. How do I get it functioning?
Hello there, HHLSATX.
The following Knowledge Base article provides some great recommendations for troubleshooting your issue:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Of particular help would be the section using Connection Doctor:
Open Mail Connection Doctor
In Mail, choose Window > Connection Doctor.
Tip: If you see a spinning gear in Mail or the Mail Connection Doctor, choose Window > Activity to learn what Mail is doing.
Collapse All Sections | Expand All Sections (Or, click to a specific topic below that lists your issue.)
The Connection Status at the top of the Mail Connection Doctor window shows a red dot () and "Mail was unable to connect to the Internet."
Mail Connection Doctor shows all green dots () in the Status column
Mail Connection Doctor shows one or more red dots () in the account Status column
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
HP envy 4500 printer is off line
My printer suddenly went off line.
Hello again pinks5, Thanks for getting back to me with the Windows operating system. I have done some research and I have located a document that deals with an 'Offline' Printer Status Message Displays (Windows 8). If the troubleshooting does not help resolve your issue, I would then suggest contacting HP's Technical Support to see about further options for you. , : click here. Thanks once again for your time. Cheers,
-
Printer off line will not connect
after replacing old router that failed printer displays off line with new router ,rebooted router and printer and still displays off line .Printed network config and wireless has mac address f4ce46d42e37 , status disconnected , everything else enable what now frustrated thanks for looking
This question was solved.
View Solution.Forgot to tell what model office jet 6500 709n has been working perfect for 3 months until new router install
-
B110 wireless printer - keeps going off line in windows 8
Hi - Since supgrading to windows 8 I've had probelms with my wireless printer (B110) and the fact that it keeps going off line. I've now ried removing and re installing usng latest drivers. During installation I get the message that printer rediscovery problems detected. You Pc may not be able to track on line status changes of your printer. If you are using firewall software verify that UDP port 427 is unblocked from your printer at 192.168.2.4 to your pc.
Following windows 8 help I've gone to firewall inbound rules and triesd to enable udp port 427, without much success. On the new inbound rule wizard , I choose the port option then the udp option and then the specific port option and enter 427 . This eems to having no impact but if I'm being honest I've not much of a clue on what I'm doing.
any help much appreciatedWhile I am researching your Belkin router, I would like to add that you will want to set a static IP for your printer. The green checkmark in your Printer's folder just means it is your default printer and has nothing to do with whether or not it has an IP address. You have to go into your Wireless Menu on the front of the printer to "View Wireless Settings" or print a network configuration page at that exact moment it is not communicating. You are not looking for "No trouble found." Sorry I wasn't more specific but you are looking for an IP address or URL like 192.168.1.5 or 10.0.0.5 etc.
Was the above document I provided any assistance? That has very good information to help clarify the instructions I am giving up because I really want to help you but I will need a bit more information.
Here is a link to really good instructions on how to set a static IP which I think will completely resolve this problem for you.
--How to Set a Static IP in a Photosmart Printer--
Let me know if this helps.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution! -
Icon for on-line/off-line is missing
T-Bird sometimes falls to off-line mode and I never know it until I try to send a message, tells me I'm in off-line mode and would I like to go back online. When this happen THE ICON SHOWING ITS OFF-LINE IS MISSING. At one time it was in the L/R corner. How do I get it back?
From the menu bar select View-Toolbars and make sure the Status Bar is turned on.
No menu bar? Press the alt key. -
I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.
Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
HP Officejet Pro 850 showing off line when it is turned on and plugged in.
Ungh, it has been weeks now and this printer has just stopped working and is showing OFFLINE. It was plugged into the back of the computer all year and worked fine and it just stopped printing so we plugged it into the USB port at the front of the computer and it worked for a while and now no matter where we plug it in, we can see it there in the devices and printers but it is greyed out. You can make it default no problem but it just will not print. We have downloaded the driver off the site over and over, uinstalled it over and over, when you select a document to print you can send the print to the printer, you can see it listed there but it just does not print. I just went to the HP site and downloaded some kind of printing wizard assisstant or something and it sent a test page to the printer and it worked but this computer for whatever reason it gives me the message every time we try and print "Printer off line" Anyone have any suggestions? Very frustrating. Thanks! Mike
Hi Mike-lake,You may find this document helpful. It covers a number of situations with the printer showing "offline" and walks through fixing this. http://support.hp.com/us-en/product/HP-Officejet-2620-All-in-One-Printer-series/5357283/model/5385219/document/c04249080Please let me know if this corrects the issue for you!Jean
-
Firstly I am unable to use Apple mail except for hotmail, for blueyonder, gmail or Sky as the server shows as (off line) and I have no idea how to get them on line even though I tell them to go there.
My pop up blocker doesn't work and I am blitzed with advertising windows virtually on ever command I make, one seems to be impossible to unsubscribe from.
When I am in an email with a web link the web link doesn't work and I get a window saying that I must have a pop up blocker, but if I switch it off it is no different, what does work is switching the "enable Java script off", then when I get to the web site I can't use it until I switch the java script back on.
I can't do a screen shot either full or partial, when I try it changes the web site that is on screen to another.
So what have I done that might have caused problems, downloading Yosemite seemed to be the start of the problems. Since then I have started to install Mackeeper, after checking with a family members who should know, that MacPaw is safe. I decided that I didn't want to pay the subscription, so went through the uninstall instructions but it comes up as a pop up with considerable regularity.
My stress levels have gone through the roof with pop ups happening so regularly and not being able to use Apple mail.o can anyone help please?
SMail troubleshooting - Yosemite
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages
SMTP servers keep going offline
Maybe you are looking for
-
If statement in skin.xml
Hello All, I am trying to put condition in skin.xml file.how to do that kindly suggest.
-
ITunes won't let me add new songs to established playlists - what's wrong?
I'm more than frustrated. Yesterday, everything worked fine! I created 3 playlists and did the drag/drop of songs into the playlists. Today, I bought more music. Those songs show up in my library. But ... when I try to drag/drop the new songs into th
-
BT Infinity Connection Dropping but BT refuse to a...
Hi, So in September we got BT Infinity. It was a hassle and handled terribly by BT customer service but we eventually got it. It's been working fine for around five months but within the last few weeks we have been having connection issues. Over East
-
Hi friends, I am getting the following error while creating in the first receiver determination between file 2 IP 1.)under configuration overview, the communication component is correctly showing but under this it is showing wrongly the outbound mess
-
No ttJdbc in java.library.path
Hi, I am getting following error while starting JBOSS which is pointing to timesten (java.sql.SQLException: Problems with loading native library/missing methods: no ttJdbc in java.library.path) I have set LD_LIBRARY_PATH /u01/app/oracle/product/10.2.