Status Overview of ODS Problems

Hi All,
  I have problems accessing Monitor Status Overview of ODS. I have a RAISE_EXCEPTION error, Exception condition "NO_VALUE_FOR_SID" raised
  Can I see if all ODS have the data active (green in the monitor)?
  I need some program to do this or a table.
Thanks,
   Federico.

Thanks, but this doesn't resolve.
I go to RSA1->Monitor->Status Overview of ODS and I receive an ABAP error and the RSA1 is close.
I need to see the same information of I can get from Status Overview of ODS or resolve the problem.
Thanks,
  Federico.

Similar Messages

  • Quotation status overview Unit Basic Materual determination

    Hello,
    We employ the technique of the material determination between the copy of a quotation to an order.
    The alternative articles have all like basic unit PCE and sales unit M2.
    The conversion ratios are not the same ones for each article.
    For example for 1st article 1 m2 = 100 PCE, for second article 1 m2 = 25 PCE.
    But the selling price in M2 is the same one for all the articles.
    The material entered has the same basic unit and sales unit M2.
    The completion rule for quotation is u201CB Item is completed after full quantity has been referencedu201D
    When I create an order in reference with the quotation, the entered article is replaced by an article for example 1st list.
    The quantity in the quotation is 100 m2 and the quantity in the order is 5 m2.
    The item is automatically completed because the quantities calculated for the status of the item in the offer are false.
    In the flow document the quantities are 500 PC in the base unit of measure or 5,00 M2 in the document unit of measure.
    In the status overview for the item the status is u201CFully referencedu201D with 500,00 M2 referenced and 0,000 M2 open.
    The system tries to convert in the basic unit but they are not the same ones between the entered article (M2) and the alternative article (PCE).
    How to solve this problem?
    Thank you in advance.
    Best regards
    Frédéric Blaise
    e-Kenz S.A.
    MM01 Create material
    _ 6309006001 base unit M2 sales unit M2
    _ 6301311601 base unit PC sales unit M2 conversion 1 m2 = 100 pc
    _ 6301313601 base unit PC sales unit M2 conversion 1 m2 = 25 pc
    VB11 Create material determination
    _ Material entered 6309006001
    _ Alternative materials 6301311601 and 6301313601
    VA21 Create Quotation
    _ Item material 6309006001 quantity 100 M2
    VA01 Create Order with reference to quotation
    _ Material 6309006001 changed to 6301311601 and quantity is 5 M2.
    VA23 Display quotation
    _ Status overview 6301311601 Fully referenced 500,00 M2 referenced instead 5,00 M2

    Hello Frederic
    For Material Determination to work properly, I think both the original material and the substitute should have the same Base Unit Of Measure, which is not the case in your example. I think that is  the issue here. You may have different sales Units and conversion factors, but the Base should be the same I guess. Try to address that issue.
    Secondly in the condition record, You can maintain 'Susbstitute UOM',  maintain it with PCE and/or M2 and see if it helps.. I don't think it would.
    See the OSS Note which explains how sales units work in material determination.
    826249 - Manual product selection: VRKME sales unit
    Hope this helps.

  • Performance Dialogue error - Query "Status Overview is already open in ano

    Hi All,
    We implemented ESS MSS on Portal 7.01 SP8. With With SAP_ESS 603 SP7 and BP_ERP5ESS 1.41 SP9
    This is for country Qatar and it has made as a copy of GB as SAP doesnt provide any country structure for Qatar.
    We are facing error in Performance Dialog saying "Query "Status Overview is already open in another session" when click / display button is clicked after selecting the Appriasal document in ESS.
    This is working fine for all other countries and also this works fine if another country's portal role is assigned to same PRNR or test user.
    We cant see any locks in backend / portal.
    Please can someone help.

    Hi Siddharth,
    We have already checked and there were/are no locks in Sm12.
    I tried deleting the locks using the mentioned program, in result is does say that ! query found but when I go to Portal and open the Performance Dialogue document , I still get the error Query " " is already open in another session
    Note 1432358 is for  SAP_BASIS >= 701 which is suitable for our case but, just wanted to check, Performance dialogue works fine for all other countries and only for this particular country it's not working.
    We are able to replicate this in Development and Test, both the environments.
    Also, when this particular user is assigned, another country's portal roles the problem doesnt occur.
    Any clues?

  • Activating objects but not showing up in Cache Status Overview

    Hello SDN.
    We are on PI 7.1. A strange thing started happening. I can change an object and when activate, I get success, but in checking the Cache Status Overview it does not show up. We set up our SLD as follows
    SC_Systems (i.e. SAP, Outside Vendors etc) (all service interfaces and actions go here)
    Which is the parent of SC_Mapping (all operation and message mappings)
    Which is the parent of SC_Models (all DataTypes, ED, and Message Types go here)
    So
    SC_SYstems
        SC_Mappings
             SC_Models
    When making a change to the models SC and activate we get the following problem above, also for SC_Systems. But when I do this for mapping there is no issue.
    One thing that is different is a new developer accessed the DataType from the SC_Systems and changed it, thus causing a conflict (We usually access and change DT, MT etc in SC_Models.
    Since then it seems both are not allowing activation even though it says successful.
    We have bounced the system, done all cache refreshes that I can think of and are about to go back 3 days to a backup store point, but want to see if anyone has any idea what the problem could be.
    Thanks in advance
    Cheers
    Devlin

    Hi,
    It may be too obvious, but have you checked the Change Activation List?
    Perhaps the objects that were edited are "pending" there.
    Clear the SLD cache later.
    Regards,
    Caio Cagnani

  • Link missing for appraisal documents in MSS Status overview

    Hi all,
    For ESS Status overview page of Flexible Appraisal document, the appraisal documents are listed with links. when we click the link, its taking to the appraisal document.
    For MSS Status overview page of Flexible Appraisal documents, the appraisal documents are shown as texts and there is no link. (hyperlink). Opening the document is possible only by clicking 'Display' or 'Edit' button.
    I have checked throughout the SDN and unable to find the problem. Our functional team says that the link was appearing before. Could some one help on what configuration is necessary to get the link for appraisal documents in MSS
    Thanks,
    Kothand

    Hi Deepak,
    I think i have not made the details clear. Its not the tag or the text values i am talking about.
    Its the POWL page where i am not able to view the link for appraisal documents .
    Below is our MSS landing page for appraisal document
    [MSS Landing page  - |http://www.freeimagehosting.net/8ad47]
    Below is our ESS landing page for appraisal document
    [ESS Landing page -|http://www.freeimagehosting.net/f3572]
    The hyperlink property is missing in MSS page. I beleive its some IMG configuration or portal configuration missing for MSS.
    Can someone Please throw some light on this
    Regards,
    Kothand

  • Billing status overview

    I have created sales order delivery and billing document. its account document has already been created too. And when i check in delivery ( VL02N ) status overview, billing status is A:being processed.
    I have made this delivery by batch split.And it is written partially invoiced. Why is it written being proccesed instead of complete ? Is it a problem?
    item material delv. qty. open qty
    10          100100     0       6
    90001     100100    2        2
    90002     100100    4        4
    when i chech item 10 and view status overview, there is no billing document and account document is shown. But i check item 90001 and view status overview it has a billing document and account document. And 90002 is same as 90001.
    Would it be according to the batch cuztomizing or ABAP?

    hello,
    yes this is a customizing issue. Check note 77414.
    The problem is probably, that your main item is still waiting to be billed. so check billing relevancy settings in VOV7 and billing quantity settings in VTFL (copy control) for both the main and the sub items.
    Balazs

  • Prg to see the Status of Cube / ODS

    Hi Guru's,
    I just want to know whether we have any standard trasaction or prg that could just give the loading status for Cubes or Ods objects,Actually I load data into cubes and ODS daily, I want to know whether we have any different way rather than seeing in Monitor.
    Points will be awarded to the answers
    Thanks,
    Krish

    Hi Krishna,
    An optional report that I utilize quite frequently is the ODS Status Overview which is found in RSA1 under Monitoring. It gives you a nicely summarized depiction of all the active ODS's in your System along with their respective activities/statuses.
    Joe

  • Delivery Status Overview BS:A

    Hi
    In delivery document, i have checked status overiew. Item, which has been delivered by batch split,  billing status overiew shows A:being proccessed. But its billing document has already existed.
    Is it a problem?
    thanks

    Thanks for your quick repyl,
    But its account document has already been created too.
    item     material   delv. qty.    open qty
    10        100100          0              6
    90001   100100          2              2
    90002   100100         4                4
    when i chech item 10 and view status overview, there is no billing document and account document is shown. But i check item 90001 and view status overview it has a billing document and account document. And 90002 is same as 90001.
    I have checked for another customer and material. But it status shows C:completed.
    Would it be according to the batch cuztomizing or ABAP?

  • Query "Status Overview is already open in another session"

    Hi All,
    We implemented ESS MSS on Portal 7.01 SP8. With With SAP_ESS 603 SP7 and BP_ERP5ESS 1.41 SP9
    This is for country Qatar and it has made as a copy of GB as SAP doesnt provide any country structure for Qatar.
    We are facing error in Performance Dialogue saying Query "Status Overview is already open in another session" when click / display button is clicked after selecting the Appriasal document in ESS.
    This is working fine for all other countries and also this works fine if another country's portal role is assigned to same PRNR or test user.
    We cant see any locks in backend / portal.
    Please can someone help

    Thank you for the quick response.
    We are planning to provide a link for the same as 'Delete the locked session', so that the user is able to unlock the locked session.
    As I mentioned the std report POWL_D01, can we use it to do the same?
    Regards,
    Pranita S

  • Part appraisals as part of OSA Status Overview in MSS?

    Hi,
    I'm in the middle of a clarification phase regarding implementation of Objective Setting and Appraisal (OSA). This is my question regarding part appraisals:
    In the Status Overview page/iview in MSS, the manager can prepare, see, select and modify documents with statuses like In preparation, In Planning and In Process.
    If a document has the substatus "Part appraisal in process", and the manager is the first part appraiser, I would expect the document to open the part appraisal column for input when I select the document from the "In Process" column. Instead the document is opened with the Final Appraisal column open for input.
    How can you include a managers part appraisal documents in the Status Overview page, or have the part appraisal column open for input?
    We want to make the Status Overview the "one point of access" for the managers appraisal tasks, but is that possible within standard?
    Kind regards Henrik

    Hi Henrik,
    Is your issue resolved, we did notice the similar behavior. However if BSP application HAP_DOCUMENT/documents_todo.htm is called directly, it displays the Part appraisal first and then upon completion it displays Final appraisal.
    I plan on providing this as URL in MSS as an alternative till OSS status overview is fixed.
    Any info ?
    regards
    Sridhar

  • Function module/Webservice for Sytem status overview widget

    Hi,
    We want to create a "System status overview" - widget, which can show very briefly an overview of which systems are up an which are down (+ some additional backgroundinfo).
    (Instead of communicating system statusses via e-mail)
    Therefore we are looking for a function module/webservice which provides status info of all systems linked to Solution Manager. Does anybody knows about a standard functionality which provides this information, or does an application lik that already exists?
    Thanks in advance for your replies.
    Cheers,
    Sander

    Hi Mohammed,
    Thanks for the reply.
    That 's exactly the information we need, but we want to be able to create a simple display to the end user:
    - without logging into the system
    - displaying only a red or a green light/system
    - information about all systems in all solutions
    to put into the portal or even better, to put into a widget (I was thinking about using Adobe Air for this one).
    To do so, I think there will be the need of a simple web service which returns a list of all systems toghether with their availability status...?
    KR,
    Sander

  • PCR: Status in the Status Overview table is not updated

    Hello,
    In MSS, a manager can look at a status of submitted Personnel Change Requests (PCRs).  The status field always displays "open".  It doesn't get updated. 
    I saw a few notes on this issue.
    Note 1004470 ISR status overview: Status change incorrect
    Symptom: The system does not refresh the ISR status overview for a request in the WebDynpro iView although the status of the request has changed.
    Solution Implement the attached correction.
    Later execute the QISRSTATUS_REP correction report contained in Note 947790.
    But the note 1004470 is already applied because we are on SAP_APPL version 17. Will the report help me out? I'm not a core abaper/hr consultant. So, if someone could help me explain what the report does, i run it.
    Also, can any one point out which data source (name of the RFC/workflow/others) fills up this data?
    Thanks!
    ak.
    PS: Points handy for valuable answers.

    clocing

  • Hiding Status column in MSS Status Overview for Personnel Change Requests

    Hi,
    We have MSS implemented in SAP Portal.
    We are using Status Overview for Personnel Change Requests iview for which we have multiple columns displayed with data.
    We need to hide Status column in Status Overview for Personnel Change Requests iview for all the users.
    Can any body please let me know how it can be done.
    Regards,
    Pradeep B
    Edited by: pradeep balam on May 17, 2011 4:01 PM

    Hi Pradeep,
    Preview the portal page which you want to edit, in this case status overview in PCR. In the preview press the CTRL-key and right-click on the column that you want to edit. Here, you will be able to perform your customizations like hiding columns, labels etc
    Hope it helps,
    Prathamesh

  • Consolidated status overview for all test plan

    Hi all,
    We are performing our Integration test from SolMan. I would like to generate a consolidated report which will give me data same way as the status overview gives for individual test plan.
    This will help me to track the progress at the test package level, which inturn is my IT scenario.
    Any quick help will be highly appreciated.
    Regards,
    Smita

    Thanks Prabhakar,
    I am aware of this, but this gives me details for one test plan.  Even when I use STWB_2, it gives me summary of all the test plans, and for status overview I have to go in each and every test plan.
    I am looking for some way out to generate the status overview of multiple test plans together in same screen, for reporting purpose.
    Any suggestions?
    Thanks,
    Smita

  • Supress radio buttons "Confirmation" and "Invoice" in SHC status overview

    Hello,
    We use SRM 5.0 - Classic escenario.
    I need to know how one can supress the "confirmation" and "Invoice" radio buttons which appear in the status overview of the SHC after the Purchase Order has been created for it.
    Is this Config, Profiles or a BADI one has to aplicate.
    In the last case, can anyone send me some example coding.
    Thanks for any answer,
    Aart

    Hi Disha,
    SDN does not allow me to send my  direccion in one piece.
    So I cut it up in three parts, just add the bits to get the full direccion
    1.     aart.engbersen
    2.     @
    3.     visionone.cl
    Thanks
    Aart

Maybe you are looking for