Status profile delete

Hi,
How can delete the status profile for Business partner?
Also,
Can I change this status profile with out deleting let me know.
--Naveen Inuganti.

Hi Naveen,
          As per the System Flow for SAP CRM whenever a Buisness Partner Gets Created and a Status gets Assigned to the Buisness Partner,Thee system does not allow to Delete the Status for that Buisness Partner whereas it allows only to update the Status for that Buisness Partner by Changing the Status only,
"This is a user status with status number and cannot be explicitly deleted. They are deleted implicitly when another user status with status number is set."
Use of Staus Profile for BP:
With this activity you can create a status profile for your own status (user status). The following has been established in the status profile:
You establish in which sequence the user statuses are run through. This is also established by the status number. If you do not assign a status number to a user status, this status can always be set. However, there can only ever be one user status with an active status number. When you assign a status number to a user status, you have to assign a lowest and highest status number. These limit the status number interval, from which the following user status can be selected.
Via Object Categories you assign at least one object category to the system profile.
You define the initial status that is activated when the object is created.
Applocation:
Which user status is automatically activated when a business transaction is carried out
Which business transactions are allowed or forbidden when a particular status is active
In the status profile you can define a transaction that is executed by the user status, with the result that one or more system and/or user statuses can be set or deleted.
Hope it answers your Query...
Thanks and Regards,
RK.

Similar Messages

  • Deleting user status profile in equipment master

    Hello experts,
    can anyone tell if it's possible to delete a user status profile. Once we used an user status profile in an equipment i cannot find i way to delete or change the profile to another profile.

    Hi,
    You can only change the user status profile in the equipment provided no status value has been set. Once a status value is set (maybe as intital status) the field is closed for input and no change can be made to the profile.
    -Paul
    Please use [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum for PM/CS specific topics

  • Impact delete Statuses from existing status profile

    Hi experts,
    What is the impact to the existing trade promotion plan if in configuration delete the existing statuses from  the existing status profile?
    Cheers.

    Hi Mini,
    We had to do this after we went live and it had a wide variety of consequences.
    I will just assume that this is not being done when already in production.
    a) If you have built some logic in the search based on the user status you will have to redo that
    b) Any logic which was done around authorization or status drop-down field control on UI has to be redone.
    c) Of-course if there was any reporting already done on the status then thats another point for you.
    Other than this the data integrity of the existing Promotions is affected.
    I hope this information will be helpful for you in making a cautious decision.
    Thanks!
    Amrut

  • How can I use two "Status profile" for two categories of users?

    Hi friends,
    I tried to configure two categories of users :
    1 - First category (User1) can process the message and access to the standard Status profile (SLFC0001),
    2 - The second category (User2) can process the message using another status profile (ZSLFC001).
    To do this, i process like following :
    1 - I created ZSLFN autorization key by copying of SLFN (Tcode :BS52).
    2 - I created the Status Profile "ZSLFC001" by coping the SLFC0001(TCode : CRMBS02).
    3 - I suppress some user status (ex : send to sap) and I replace SLFN autorization key by "ZSLFN"
    4 - I created Transation type "ZLFN" assigned to ZSLFC001 status profile.
    5 - I created a ZSAP_SUPPDESK_PROCESS rôle and I set the ZSLFN as authorization key in "B_USERST_T" and in "B_USERSTAT". This role is affected to the User2
    Unfortunately, the User2 see and access to the "Send to SAP" user status. I think that the status profile ZSLFC001 is not used!!!
    Tank you for your help,
    Samad

    Hello Xavier,
    I changed the Process Type in DNO_CUST04, and I had a error message : "The system could not create the message because of an RFC connection "NONE " error Message was not created".
    Furthermore, The change of process type will affect all users.
    I think that there are two possibilities :
    - Using process type (SLFN or ZLFN) according to the user processor,
    - or using the same process type (SLFN) and according to the processor to load the appropriate "status profile".
    Please find below more informations about the role:
    - the Manually   Status Management: Set/Delete User Status                    B_USERSTAT
       Activity                  :    01, 06                                
       Authorization key   :    ZSLFN                               
       Object Category     :     *                                          
       Status Profile         :    *                                          
    Thank you
    Best regards
    Samad

  • Status Profile for Sales Order

    Can anyone send step by step process for configuring Status Profile?

    Dear Anupa
    Being a senior member, dont you aware of the forum rules.  I am sorry to say that the informations you exchanged personally is definitely condemnable and we as a Moderator can ask the concerned panel to delete all your points.  But since I come across as a first instance, I dont want to do this.
    Please try to maintain the forum rules and also advise newbies to go in line with the guidelines.  Dont spoon feed them.
    thanks
    G. Lakshmipathi

  • Third party Sale with status profile.

    Dear All,
       We have one business scenario of third party sale, My client is asking to configure that.
    We have created third party scenario in SD,
    When we create Sales order , status profile has been set
    Say,
    1st Crete
    2nd Verify
    3rd  Finance
    4th Rejected
    When approved at third stage it should be create purchase requisition.
    But if we reject this (4th stage) then PR should be auto cancel or deleted.
    Can it possible:???
    If possible then what should be configuration ??
    Thanks in advance...

    Hi Rohit,
    Yes, this is possible
    Create a user status in OIBS transaction code as
    and if you double click on each status in the next screen you can see Transaction control
    Click on create option and choose Material Purchase Requisition as Allowed for CRTE, VERF, FIN
    and choose Forbidden option for REJ status
    It is not necessary to create the status as defined above, you can define status as you wish, but sequence should be maintained as shown
    try and revert if you got stuck anywhere
    thanks
    santosh

  • User Status Profile for Outbound Delivery in EWM

    Hi Gurus,
    I have the following scenario. We're working with invoice before goods issue. Invoice is created upon user request on transaction /scwm/fd on option "Request Invoice + Save".
    After the invoice Request is sent to ERP we need to block the possibility of deletion of the outbound delivery.
    Send the request to ERP changes system status DIN on outbound delivery header. We've created a custom status profile with just one status (code BS02).
    This status is set when standard "Request Invoice" is set. This works fine. On this custom status, we've marked the option for business transaction "Delete Document" as forbidden. This doesn't work. Even with our custom status active, its still possible to delete outbound delivery.
    The custom status is has the "Outbound Delivery" object type allowed and its assigned to standard "/SCDL/OUT_FD_STANDARD" profile.
    Anyone have any idea what could be the problem?
    Thanks in advace.
    Felipe Tripodi

    Hi Christian,
    Thanks for your reply.
    We've decided to implement badi "Validation for Actions" within delivery due to the lack of time to resolve the issue. This decision was based on note "1833378 - Prevent deletion of outbound delivery with invoice". This note gives you sample code for badi to check ERP billing status before deleting the document. We've adapted the code for our needs and it works great!
    After your reply, i spent a little more time on user status, and found an OSS note that guides you trough some configuration steps on tcode /BOPF/CONF_UI. After applying this setting for business object /SCDL/FDO, the user status also worked fine!
    Best Regards,
    Felipe Tripodi 

  • How to Change WBS Element Status Profile

    Dear PS Experts,
    Once Status profile is set for WBS element, system is not allowing to change the same.
    What should I do to change the status profile?
    Moreover I will like to know the Table details in which Status profile details are kept for a WBS Element.
    Thanking you all.

    Hi,
    You can change the status profile on 'Control' tab of Project Definition. But this change will be effective for new WBS elements. I dont think you can change status profile for existing WBS. You will have to delete and re-create them.
    Status proflie for WBS is stored in JSTO table. Get OBJNR for WBS from PRPS table and insert in JSTO table to get status profile.
    Regards
    Shrikant

  • Data source and origin of ELM&status profile means

    Hi SAP gurus
      Data source and origin of ELM&status profile means ..

    We did delete and recreate...

  • Status Profile: Business Transaction Control Config (OK02)

    Hi All,
    I would need to know the use of the options 'no actions', 'set' and 'delete' under the Business transaction control in Status Profile (User Status)  --> you will need to double click on each of the statuses to view the Business Transaction Control - they are the last 3 columns.  Please provide specific example as well. 
    Also, could you help to advise the relevance of the 'lowest' and 'highest' columns in the initial screen?  Please also advise the relevance of position and priority as well. 
    I am really having difficulty understanding the definition from SAP for both items.
    Thanks!
    Vivian

    Hi VP,
    Thanks for your reply.  Just a little clarifications.
    Yes, the transaction code is OK02, sorry for the typo.  For the 'Set' User Status, if below is my actual config:
    OK02:
    Status 10 - IDEN
                                     Influence               Next Action     
    Bus Trans               No Influence        Allowed      Warning     Forbidden      No Action     Set Status       Delete Status
    Complete                                          X                                                             X
    Confirm WBS                                    X                                             X                 
    Confirm order                                    X                                                             X
    Lock                                                X                                                             X
    Lock assignment                              X                                                             X
    Lock budgeting                                X                                                              X
    Lock dates                                      X                                                              X
    --> now let's say the WBS is currently set as status 10 IDEN.
    a). if someone suddenly do 'complete' (this is not a system status right?). as it is indicated as 'Set Status', what status will be set? user status or system status? What will be the value for the status to be set?
    a). if someone suddenly do 'confirm WBS' (not a system status right?). as it is indicated as 'Set Status', what status will be set? user status or system status? What will be the value for the status to be set?
    Also, may I know where I can see list of system status?System status cannot be defined / added by user right?
    Vivian

  • Status Profile -Transaction Creation

    Hi to all.
       I have a confusion in status profile.
      What do u mean by "Transactions allowed by the Object"
    CAPR approve
    CCID  change number.
    CCLS finsih    Etc..
        What is the exact meaning of Transaction here?
    Is it Transaction Types???
    regards,
    sanjana

    Hello Sanjana,
    This is only used for CRM Activities. Press F1 when you cursor is in that field to get the explanation:
    CRM: User Status Triggers Business Transaction
    This field is only relevant if the status schema for object type CRM Activity is to be used. If you set a user status this triggers the execution of the business transaction assigned here.
    This has the followig consequences:
    The system status assigned to this business transaction by SAP is set/deleted (transaction BS33, menu option Follow-up actions)
    The user status you assigned to the business transaction under menu option Business transaction control in this transaction is set/deleted
    Hope this helps,
    Reward points if useful, people put their time in providing you with an answer!!
    Regards,
    Joost

  • User status profile - help needed

    Hello,
    We would like to use a status profile in which there are three possible states:
    1: Open (Users can enter and change data)
    2: Closed (When this status is set, no data can be changed)
    3: Re-open (If a trasaction has the status closed, but for some reason something needs to be changed, setting this status allows it to change data)
    The problem lies in the fact that in order to prevent data being changed in status "Closed", we set the entry in the last column to "FINI"and the Business Transaction "Change Document" to forbidden. This works since all the fields are no longer editable, including the status field.
    Is there a way for us to make suure that all fields are not editable, at the same time allowing (certain) users to change the status to reopen so that changes can be made?
    Help will be much appreciated.
    Regards,
    Alex van Vondelen

    Sorry, can't have the cake and eat it too.
    Only way is to do it through another custom program. For example, see if the process of Reopening requires any workflow type of authorizatrion. Then you can sneak that in the approval process. We had a very similar process of not allowing a class of users to change the document (and status) and there was a workflow involved in the process.
    Easiest way is to write a small dialog program, get the transaction number and check the authorization of the user, to start the process. You may have to directly modify the status tables - remove (delete) the "Closed" status after authorization check.

  • Sales order status profile

    Hi,
    I have made a sales order status profile & assigned it. It is working fine. However, i am having difficulty in assigning authorisations to the particular users. The Basis consultant has advised that it is a purely functional issue. How do i go about authorising the particular users to status profiles.
    Kindly help in this regards,
    Thanks in advance,
    Hussain

    Hello,
    Use Tcode PFCG. Enter role and click on change button. Authorizations tab.
    Click on authorization data .
    Expand the Cross-application Authorization Objects tree. Expand Status Management:
    Set/Delete User Status using Transaction.
    Authorization key button, assign Authorization key.
    status profile. Assign status profile.
    Maintain authorization key (authorization code) in status profile with Basis help
    To add authorization code use Tcode BS52.
    Also, refer Status Profile Settings
    Thanks & Regards
    JP

  • Mass Maintenance for flag in Status Profile (Quality Info-record)

    Hi Experts !
    I have thousands materials to change in mass the level in the status profile of Quality info-record.
    Unfortunately, QI05 - QI06 - QI07 don't allow to do this in mass maintenance mode. We can add, change or delete status profile but no more. You don't have access to the different level to apply for example LEVEL 3 (Ship to line) for all list of materials.
    Many thanks for your help.
    Stéphane

    Using your way, we can not change the flag with mass maintenance.
    You can just add a new one or delete an existing one.
    What I would like to do is :
    Change in mass maintenance all flag from Level 1 to Level 2 in Status profile of all existing Quality info-record or list of them.
    QCC2 is customizing for Notification.

  • How to assign the status profile to that particular user..?*

    Hello Everyone..
    I have created a status profile for the particulat sales order type so that a particular user can confirm the sales order and the pass it,so that further changes can be avoided.The profile has been assigned to Item category also.
    Now My problem is ,How to assign the status profile to that particular user..?
    so that only the user is allowed to change the order.
    Thanks

    Hi,
    Maintain authorization key (authorization code)  in status profile.
    We do not assign directly to user. We assign to role E.g sales manager / sales employee etc...
    We assign T.codes to role and assign role to user.
    Goto Role T.code PFCG. Enter role and click on change button.Goto Authorizations tab.
    Click on authorization data .
    Expand the  Cross-application Authorization Objects tree. Expand Status Management: Set/Delete User Status using Transaction.
    Click on Authorization key button, assign Authorization key.
    Click on status profile. assign status profile.
    Regards,
    Chandra

Maybe you are looking for