Status Profile - System Status Set Relased Automatically

Hi Experts,
We have created a new status profile for item category X and and have assigned the same. When editing an order the user status is "In Process" at item level and automatically the system status is set as "Released" , ideally it should have been "In Process".
Not able to conclude on why this is happening. Request your expert opinion.
Thanks,
Chaudh.

Hi Chaudh,
What business transaction have you assigned to the user status? For In Process it should be INPR and not RELE.
Kind rgards,
Vanessa

Similar Messages

  • What is system status SETT in COOIS

    Hi experts,
    In report COOIS we can see system status as SETT but this status is not available in production order status bar (Tcode CO02) either active or inactive.
    After settlement of production order status gets updated as SETC.
    I want to know status SETT comes into picture?
    Thanks,
    Bijay

    Hi,
    SETC: Settlement rule created
    SETT: Settled
    Regards

  • Resubmission status set as completed

    Hi,
    We face an issue with the FSCM module  We see that a lot of resubmission status set as completed. The change log showing user name and date and time but user informed as the completion was done by my account (user id) but not by me.
    There was no job schedule for this activity. Normally will the status manually.
    Is any possibility to set status as completed by automatic run due to change of collection profile, strategies etc reasons? If so how to find whether it is auto run. Or any other possible to change status.
    You input in this regards will be highly appreciated with high points
    With regards,
    V.krishnamoorthy.

    You can use transaction MASS and set object type as BUS2012. Than select "Purchase Order Item" and run (F8).

  • In Process Order status "SETT" Settled

    Hi
    After settlement of Process Order, system status (SETT - Settled) of Process Order is not updating atomically. 
    After settlement of Process Order, Process Order allow only in Display mode & there is no posting allow against settled Process Order.
    Please suggest me what are the setting required.
    Regards
    ARK

    ARK,
    In your order type dependent parameters in transaction COR4, for you plant order type combination for Process documentation "Order record" radio button is active, that's why system is not allowing you to set deletion flag.
    Are you working on a client system or a training system where you are just trying to test different scenarios?
    If you are working in training system then in COR4 transaction for the plant order type combination you can activate the radio button for "No process documentation required". Now if you check the order it would allow you to set deletion flag.
    If you are working on a project and client system, you need to ask the user to execute transaction COPA to store the order records, once this is done you would be able to set the deletion flag. (Please note: Before you execute transaction COPA necessary basis setting for storing has to be in place.)
    Regards,
    Prasobh

  • No entered status set. No results analysis will be performed

    Hi Guys,
    I keep on getting this error message beloe and the valuation is on RELEASE status
    No entered status set. No results analysis will be performed
    Message no. KJ210
    Diagnosis
    The valuation of the order or project in results analysis depends on the status of the object.
    In this case, the object does not have an active status entered in the valuation methods in Customizing for WIP calculation and results analysis. Consequently, WIP calculation and results analysis cannot find a method with which the object can be processed.
    Procedure
    Decide whether the object should be processed in its current state (indicated by its active status in status management) by WIP calculation and results analysis.
    If you want to process the object:
    In Customizing for results analysis, choose Period-End Closing -> Results Analysis -> Define Valuation Methods for Results Analysis, add an entry for this status, and specify how objects with this status should be processed.
    If you do not want to process the object:
    This message is inconsequential for you. No follow-up actions are necessary.
    In Customizing for results analysis, choose Period-End Closing -> Results Analysis -> Define Valuation Methods for Results Analysis and select the No valuation indicator. This message is then no longer issued by the system.
    Example:
    In the standard system, there is normally no entry in the valuation method for the status CRTD (Created). You will therefore receive this message for objects that only have the status CRTD.

    Hi Guys,
    I manage to run the RA. The problem why I could'nt get it right was because I did not run transaction MMPV to close period for material master
    Thanks for your help.

  • Status SETT in proc ord

    Hi,
    At which timing does this status happens?  When the FI team settled the order, there are no Status updates for the particular order, and I am wondering if how can we use this? thanks.
    regards

    Hi,
    One suggestion would be:
    For the settlemt the important Statuses are DLV and/or TECO.
    So, after settlement, you filter the Orders with DLV and/or TECO and Proceed Further.
    System will set the CLSD Status, if there is no pending Costs or goods Movements post processing recors and Confirmations..
    Hope this helps..
    Regards,
    Siva

  • Order Settled status 'SETT'

    Hi,
    PP gurus
    My requirementis that is in process order information reports(COOISPI), i cannot able to see process orders which has already been settled with actual costs incurred and closed,
    such orders should show the system message as SETT in reports.This system status SETT is already available in BS22 and already maintained, but why it is not appearing when i run report at month end to check which of the orders has been closed and settled, Only CLSD status is appearing why not SETT.
    My problem is that how to activate the system status SETT so that i can see COOISPI report with settled orders.
    is there any provision to activate with respect to process orders or any standard CO report is available to see orders pending for settlement and already settled.
    Rgds,
    Yogesh

    Hi Yogesh,
    Hope I am sure,u can check like this.
    Usually system staus is checked like this
    From the order table AFKO or CAUFV,object number is taken.then from JEST  table system status is taken and feed into TJ02T to get the status.
    You do one thing,go to TJ02T,Input status as SETT and take the system status number.then input the system status number in JEST table,u will not get any object number difined for this SETT. for all other status which will update in order object number is defined.
    Hope it is helpfull

  • How to delete production orders that have release status set in APO ?

    I have a few production orders which have a release status set in SCM 5.0 system. I need to delete them now. I cannot delete them from ECC since the ECC system no longer exists.
    I need to delete these orders in APO only ? Is there any way to do this ?
    Thanks in advance for your help!!
    Ranjini.

    Please try deleting with either of the reports  /SAPAPO/OM_DELETE_INCON_ORDERS or/SAPAPO/DELETE_PP_ORDER

  • AP801 admin status is disable automatically after router reload

    We've got cisco 887VGW with wireless AP801GN and registering to the controller 7510, 
    ap801 admin status is disable automatically after router reload.
    Is there any opportunity to fix it?
    AIR-CT7510-K9 os version: 7.6.100

    (Cisco Controller) >show sysinfo
    Manufacturer's Name.............................. Cisco Systems Inc.
    Product Name..................................... Cisco Controller
    Product Version.................................. 7.6.100.0
    RTOS Version..................................... 7.6.100.0
    Bootloader Version............................... 7.3.101.0
    Emergency Image Version.......................... 7.3.101.0
    Build Type....................................... DATA + WPS
    System Name...................................... CNDGIDCWLC01
    System Location..................................
    System Contact...................................
    System ObjectID.................................. 1.3.6.1.4.1.9.1.1295
    Redundancy Mode.................................. SSO (Both AP and Client SSO)
    IP Address....................................... 10.15.131.46
    System Up Time................................... 3 days 3 hrs 40 mins 22 secs
    System Timezone Location......................... (GMT +8:00) HongKong, Bejing, Chongquing
    System Stats Realtime Interval................... 5
    System Stats Normal Interval..................... 180
    Configured Country............................... Multiple Countries:CN,HK,TH,US
    --More-- or (q)uit
    Operating Environment............................ Commercial (10 to 35 C)
    Internal Temp Alarm Limits....................... 10 to 38 C
    Internal Temperature............................. +22 C
    Fan Status....................................... OK
    RAID Volume Status............................... OK
    State of 802.11b Network......................... Enabled
    State of 802.11a Network......................... Enabled
    Number of WLANs.................................. 2
    Number of Active Clients......................... 6
    Burned-in MAC Address............................ 64:9E:F3:65:2A:80
    Power Supply 1................................... Present, OK
    Power Supply 2................................... Present, OK
    Maximum number of APs supported.................. 300
    (Cisco Controller) >
    Cisco IOS Software, AP801 Software (AP801-K9W8-M), Version 15.2(4)JB3, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2013 by Cisco Systems, Inc.
    Compiled Wed 18-Dec-13 21:56 by prod_rel_team
    ROM: Bootstrap program is AP801 boot loader
    BOOTLDR: AP801 Boot Loader (AP801-BOOT-M) Version 12.4(23c)JX, RELEASE SOFTWARE (fc1)
    NST6839 uptime is 4 hours, 32 minutes
    System returned to ROM by power-on
    System image file is "flash:/ap801-k9w8-mx.152-4.JB3/ap801-k9w8-mx.152-4.JB3"
    Last reload reason:
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    cisco AP801GN-A-K9 (PowerPC 8343) processor (revision B0) with 49142K/16384K bytes of memory.
    Processor board ID FGL164624AL
    PowerPC 8343 CPU at 400Mhz, revision number 0x0031
    Last reset from power-on
    LWAPP image version 7.6.100.0
    1 Gigabit Ethernet interface
    1 802.11 Radio
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 70:CA:9B:2F:49:30
    Part Number                          : 73-11027-11
    PCA Assembly Number                  : 800-28807-11
    PCA Revision Number                  : B0
    PCB Serial Number                    : FOC1634C1G6
    Top Assembly Part Number             : 800-33059-04
    Top Assembly Serial Number           : FGL164624AL
    Top Revision Number                  : B0
    Product/Model Number                 : AP801GN-A-K9       
    Configuration register is 0xF

  • How can I make the status bar hide automatically when using safari?

    How can I make the status bar hide automatically when using safari?

    When Safari is in FullScreen mode, menu bar will be hidden.
    Safari window to fit the screen?
    Move the mouse pointer to the bottom right corner of the Safari window.
    Double arrows will appear. Drag it to resize the window to fit the screen.

  • Instance status set to Faulted when catching an Exception in a BPEL flow

    Hi,
    I have a question regarding BPEL & catch (SOA 11.1.1.4.0). When the composite catch an exception (using catch-all block), the status of the composite is set to Faulted immediately even when the flow continue to run. In this specific case in the flow, the problem is handled in the catch flow and I want to continue with the flow.
    So when I'm looking at the Enterprise Manager console, I see many Faulted instances and I don't really know the "correct" status.
    Is there a way to actually use the catch-all block but still have the status set to Completed ? If not, are there any consequences. For example, is the recovery of instances continue to work ?
    Thanks,
    Ronen

    Hello,
    1403 is out of range for the return value, see https://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1342602684748
    We can raise errors in a given range but the shell will only keep an
    unsigned byte in the status return value (values 0..255).  It takes our exit file and
    just looks at that last byte.
    It also shows how to get around this limitation.
    Regards
    Marcus

  • Set TECO automatically when assembly scrap is used

    Hi Experts,
    could any of You help me pls with a mass processing of TECO status, when using assembly scrap at material master?
    In my scenario we use COHV / PPIO_ENTRY as a background job for mass process and set TECO each night - worked well till no assembly scrap was set and used.
    When assembly scrap is maintained at material master, we have a total order qty, a planned scrap and the output qty in prd order.
    When cnf is made for prd order, and reached the planned output qty I expected the same as before: automatic TECO set  - but it is not. The system still expect the total order qty to be reached - but we only go for the output qty. So when  cnf qty = to output the status should be set - if scrap is lower than the planned scrap figures the order is not technically closed by the PPIO_ENTRY backgroung job.
    Anyone pls support me with an idea, how to handle this situation, and set TECO automatically when cnf qty equals to expected output, pls?
    Answers will be appreciated

    dear friend,
    can you please look at checkbox "Generated Confirmations w/o Quantity Adjustments" in OPK4 for your plant/order type?
    do you have it 'ON' ?
    regards,

  • Been reverted back to old profile system

    Hi, just need a bit of info as to why ive been put back on to the old profile system, my hub as been syncing to my full line capacity for 3 days now, on the first day of the 3 days it started syncing at 14569kbps i was still on  the new system wich gave around 12.6meg, day2 my speed dropped to around 11meg but my sync rate stayed the same, i did a speed test and found i'd been put on the old profile system and had 12000k, day 3 which is today im still on the old profile system, i cant do a speedtest at moment as its not working, but im still getting the same speed (around 11meg) on other speed testers but sync rate on my hub is still the same, have bt put me on the old system? if they have then why? i thought it would of changed it self back over night but i didn't happen. Does anyone know why its happened?  as you can see it as re synced in the 3 days but rate stayed the same
    ADSL line status
    Connection Information
    Line state
    Connected
    <script type="text/javascript">// function p_ajax_adsl_status() { ajax_download_start('adsl_status=1', p_ajax_adsl_status_cb); } function p_ajax_adsl_status_cb(xml) { if (document.getElementById('adsl_status').innerHTML != xml) { document.getElementById('adsl_status').innerHTML = xml; mimic_button('submit_button_ajax_refresh', 1); } else setTimeout('p_ajax_adsl_status()', 5000); } setTimeout('p_ajax_adsl_status()', 5000); // </script>
    Connection time
    1 days,
    02:11:59
    Downstream
    14,569 Kbps
    Upstream
    1,166
    Kbps
    ADSL Settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    G.992.5 Annex
    A
    Latency type
    Interleaved
    Noise margin
    (Down/Up)
    2.6 dB / 6.0
    dB
    Line attenuation
    (Down/Up)
    34.9 dB / 13.7
    dB
    Output power
    (Down/Up)
    22.0 dBm / 1.7
    dBm
    Loss of Framing
    (Local/Remote)
    0 / 0
    Loss of Signal
    (Local/Remote)
    0 / 0
    Loss of Power
    (Local/Remote)
    0 / 0
    FEC Errors
    (Down/Up)
    28869 / 0
    CRC Errors
    (Down/Up)
    18111 / 0
    HEC Errors
    (Down/Up)
    97163 / 0
    Error Seconds
    (Local/Remote)
    6846 / 0
    Solved!
    Go to Solution.

    Hi thi post from one of the mods on another thread will explai to you just a matter of waiting for it to be restored
    Hi Guys
    This upgrade is only available on 21C, but only Huawei 21C MSANs (equipment situated in the local Telephone Exchange) currently support it. Exchanges with Fujitsu MSANs will get the upgrade as part of the second phase, and that is happening soon.
    There are two clear benefits to the changes,
    An improvement in the IP rate as it is much closer to the sync rate. For example under the new method a sync rate of 18000kbps equates to an IP profile of 15881kbps which is an improvement of 881kbps in IP throughput.
    The other improvement is that there is no delay in uplift because this new process takes a different route to configure the BRAS IP profile system loading and volumes are no longer an issue and the BRAS updates with the new style IP profiles immediately.
    However until phase 3, where our systems will be updated, some lines could benefit from the improvement only to be overwritten by the systems back to the old style profiles at a later date. This will be temporary until the systems have been updated where this issue will be rectified..
    Cheers
    Stuart
    BTCare Community Mod
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • My iphone is set to automatically download.  i just made some purchases from my ipad and now my phone has the app and songs showing up, but it says waiting to download.  what gives and how do i fix?

    i have an iphone, imac and 2 ipod touches 5th generation.  I just purchased some apps and songs on the ipad with hopes they would transfer to all the other devices.  some of them did go to all devices while others did not.  when i go to purchases on one of the ipods they show up as not purchaced (even though they may be on 2 of the other devices).  my iphone has them there, but it says waiting to download.  its been a day and they are still waiting to download.  I've checked settings on all and they are set to automatically download and all devices share the same apple id.  not sure what ive done wrong and have tried several things.  hopefully i haven't confused you too much.

    My problem was that Software Update didn't check for updates every day, and maybe never...
    Finally I found that: http://hints.macworld.com/article.php?story=20120824124203635
    Basically all you have to do is open the Terminal and type:
         sudo defaults write /Library/Preferences/com.apple.SoftwareUpdate.plist ScheduleFrequency 1
    The number, 1 in this case, means the frequency which Software Update is going to check for updates, so 1 means every day.
    If this doesn't work you can try two things (or both, but in this order)
         - Go to /Library/Preferences/ and delete the file: com.apple.SoftwareUpdate.plist, then open Software Update... to create a new file, and go to System Preferences to configure it again. Finally open the Terminal and try the command at the beginning of this comment.
         - If Software Update continues without checking for updates every day, open the file: com.apple.SoftwareUpdate.plist and you will see a preference that is: ScheduleFrequency with the number 1 at its right and you will see that the type is String, copy the file to the Desktop (for example) and change the type String to Number, then drag the file in the Desktop into the Preferences folder and replace the first. It will work. (For this part you will need Xcode)

  • How to set up automatic payment for the purchase order

    Hi, All,
    I have one question how to set up automatically payment for the Rent Office purchase Order?
    There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
    Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
    Thanks in advance

    Either you can set up ERS or you can pay directly from the FI side.
    Prerequisites
    Evaluated receipt settlement must be flagged in the purchase order item.
    The vendor must be flagged as being subject to ERS in the vendor master record.
    The goods receipt must refer to a purchase order.
    Goods-receipt-based Invoice Verification must be defined for the purchase order item.
    A tax code must have been maintained in the purchase order item.
    The order price of the materials may not be an estimated price.
    If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
    In Purchasing, you can delete the default ERS indicator in a purchase order item.
    Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
    The selection screen appears.
    You can use the following criteria to narrow down selection of the transactions to be settled:
    Company code
    Plant
    Goods receipt posting date
    Goods receipt document
    Fiscal year of the goods receipt
    Vendor
    Purchase order and order item
    You can define the selection criteria for the invoice documents by:
    Delivery
    Purchase order
    Purchase order item
    Goods receipt document
    Credit memo
    Invoice
    Currency
    Choose  Execute.
    The system issues a log for Evaluated Receipt Settlement, which displays the following:
    Settled
    In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
    Could not be settled
    In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
    If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
    Select the item and choose Exclude from ERS.
    The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
    You can display the following environment information for the order items selected. To do this, choose Goto ®:
    Display purchase order
    Display invoice
    Display material document
    Display long text

Maybe you are looking for