Status profile (using the tickboxes)

Hi,
is it possible to have status profile wherein it is only possible to set a certain status as long as all checkboxes (status without status number) have been checked/ticked already?
in my scenario, i want that in order to be able to proceed to next status, all the tickboxes must first be all ticked as prerequisite.. how to do that?
thanks in advance..

hi,
but im not trying to maintain the sequence of statuses defined without number.. sequence is not important.. what i want to do is that a status (with status number) cannot be set unless all statuses without status number have already been ticked..
hope someone can suggest..
thanks in advance

Similar Messages

Reg change in the status profile in the process order

Dear all,
By default one status profile ZPI0001 has been assigned to an order type ZP10 in a plant, the requirement is at the time of process order creation we want to change the status profile to ZPI0002 and create . this is applicable for one plant only
Please let me know the settings to be done for that
Thanks in advance
Regards
venkat

HI Venkat,
I am not sure why do you need different status profile at the creation of process order...
First define the status profile ZPI0002 using Tcode BS01/BS02 and assign it to the order type ZP10 using CORN. The same order type is defined to plant using COR4..Here you can only have only one status profile for each order type, however, you can define different custom user status for the status profile..Say ZOCL - Order Completely closed after system status TECO to stop all goods movements...You can't have separate status profile while creating process order and at other stage of process order..Gurus please correct me if I am wrong..
Thanks
Sree...

Status profile for the selection screen ?

Dear Shymal,
The link of thread which you sent have this line status profile for the selection screen for QA33 and QA32 . I don't users ti get those lots which are having status LTCA.
Now how can i do this? Can you explain me?
Regards,
Kaushal Rai

Dear Kaushal,
It is written in that reply status profile, is just a slip of mind/Fingers only. We can say a typographical error. I hearty apologies for the same.
Now a accept my regret and pls find the rectification herewith.
That is "Selection Profile", to create rather I can say configure it,
- Run trx BS42, create new profile, Name it Logically.
- Double click on the "_Selection Conditions_",system will lead you to the screen named Change View "Selection Conditions": Over View.
- Here Enter the LTCA, in the Fourth Column "STATUS".
- Click on the check box under Sixth column 'not'.
The settings should be as.....
1st Column,,,Link :- No Links (Blank0
2nd Column,,,Usr:- Don't check this box.
3rd Column,,,St.Prof.:- Blank
4th Column,,,Status:- LTCA.
5th Column,,,Status:- Lot canceled
6th Column,,,not:- Check this box.
7th Column,,,Status:- It will be 'Active' by default.
Now SAVE.....
Now in QA32, pick the section profile you just created.
Let me know if it don't work.
Regards,
Shyamal

Status Profile for the supply relationship Vendor

Hi Experts,
We have a requirement to maintain status profile for the supply relationship. we try here to just copy from standard but we don;t get through. since we are not able to assigned here Business transaction as well as when we assign this profile to the inspection type 01, system gives wanrning message that "Status profile QM_P_00X is not allowed for "Insp. lot with plan and char."
Pl help me to resolve this issue
MV

We have defined Status Profile QM_L_00X that is copy of SAP defined status profile QM_L_003. we have maintained two status RRNR and QINF. In RRNR Maintained business transaction make usage decision :-disalowed (X) and set action (X) and result recording:- allowed(x)
In QINF maintained business transaction close insp complete:-allowed(x) set(x) complete inspection short term :-allowed(x) set(x) and start inv post bef Usage decision:-disallowed(x) no action (x)
this status profile is assigned to inspection type, inspection plan has been created , and mic is assigned which has indicator set required char, single value, print, LSL, Sampling Procedure.
My Problem is when record inspection result and closed it.and go to for usage decision system doen not allow me to do UD ,
mv

Determine the profile using the Authorization class?

Hi All,
How can i determine the profile using the authorization class?
Does anybody know which table and and field?
Regards,
Luke

Hi ,
try with these tables
agr_users
agr_1250
usr21
Pls let me know if you still need any more help.
Thanks and regards,
Rajeshwar.

About Status Profile (used in sale document)

Hi all,
I'm gonna use a customized status profile to forbid transferring requirements to MRP right after a new sale order is created(released), but I can't find the right 'Business Transaction' in 'Transaction Control' tab, is there any guru can help me out? Thanks in advance...
Michael

If you want to do it Status profile- you have to go with the enhancement & write coding accordingly.
Try this-
Maintain 2 status while creating status profile in BS02
eg:
INTL - initial- approval required
RLSD - Released.
Create Zschedule line category & determine in such a way,so that while creating order, this Zschedule line category has to be triggered ( you can do it with VOV5)- ( make sure, in Zsch.line cat- "Requirements" box should be unticked)
now, Use the userexist to overwrite schedule line category- like- when the status is "RLSD", then sch.line cat has to be -CP(normal with "TOR" marked like in normal sch.line cat)
check : USEREXIT_CHECK_VBEP in MV45AFZB
else check with
USEREXIT_MOVE_FIELD_TO_VBEP in MV45AFZZ ( for more info- you can verify with your ABAPer)

GuiXT.ini profile using the Web Repository

HI,
Does anyone run GuiXT using the guixt.ini file from the Web Respository (ie zguixt.ini.txt).
If so, are you able to list the contents of both the guixt.ini file on the SapGui directory (where you tell GuiXT to Ignore the Registry and SwitchTo using SAPWP:zguixt.ini.txt file as the profile)
and also the zguixt.ini.txt in the Web Repository please?
thanks,
Noel.

Have found solution thanks.

Any unix commands to view network status & activity using the terminal?

I don't use the terminal much and was wondering if there are any unix network commands that let you view packet contents, connection status and other network information. I'm not interested in making any changes, I just want to use the terminal to get network and related information.
Thanks in advance to anybody who answers.
- Mark
G4/450MHz Sawtooth Mac OS X (10.4.7)

Hi Mark,
   There are tons of commands; it would help to know what you want to know. You can monitor the status of all ports with:
sudo lsof +Mi
That will display all network connections and all listening daemons. A command that is similar to that is:
netstat -a -f inet
Of course netstat specializes in network information and there are lots of different stats it will display.
   If you run a firewall, it keeps stats on rule matches. You can see them with:
sudo ipfw -atdN list
   As has already been mentioned, Mac OS X comes with tcpdump but there's only one great packet sniffer: Ethereal. It doesn't come with OS X but if you have X11, it can be installed with a packet manager like Fink.
   Finally, many running services keep their own stats or logs. You would have to read up on the ones you're running to see what information they provide.
Gary
~~~~
   A diplomat is man who always remembers a woman's
   birthday but never her age.
         -- Robert Frost

Can the user status profile function as system status profile?

HI,
One more question about the status profile..I create a status profile and assing it to a order type.After that,I create a PO using this order type..
Do we have to manually check the status "check box"in CO03 or we can make it automatically,(like the sytem status profile.When the components are withdrawed or goods recive,the status could change automatically?)thanks..

Hi
User status also set automatically as you set in BS02 according to Business transaction
for ex if initial user status is STA1 as default and you set to change on confirmation of order then as soon as you done the confirmation of order it would set as STA2 automatically

How to assign the status profile to that particular user..?*

Hello Everyone..
I have created a status profile for the particulat sales order type so that a particular user can confirm the sales order and the pass it,so that further changes can be avoided.The profile has been assigned to Item category also.
Now My problem is ,How to assign the status profile to that particular user..?
so that only the user is allowed to change the order.
Thanks

Hi,
Maintain authorization key (authorization code) in status profile.
We do not assign directly to user. We assign to role E.g sales manager / sales employee etc...
We assign T.codes to role and assign role to user.
Goto Role T.code PFCG. Enter role and click on change button.Goto Authorizations tab.
Click on authorization data .
Expand the Cross-application Authorization Objects tree. Expand Status Management: Set/Delete User Status using Transaction.
Click on Authorization key button, assign Authorization key.
Click on status profile. assign status profile.
Regards,
Chandra

Using the Same Profile for Outlook Connector and Exchange

Is anyone using the same profile in Outlook for both the Oracle Connector for Outlook and Exchange server? Only Exchange would have an IMAP mail service defined.
Oracle tech support kindly provided me with the following information but I would really appreciate hearing about customer experiences:
"In theory this should work without causing any problem if only one service within the same Profile is configured for mail. However, before configuring a large amount of users with such a configuration, please start with 1 user and perform some tests, as I am not aware of anyone using such a configuration. The fact that you want your Oracle calendar users to invite Exchange users, will be like inviting External users, the Free/Busy information for these users will not be available etc. Also inviting external user is an already existing feature of the Oracle Calendar."
Thanks very much.
Brenda

We are doing it currently as we are switching over from Exchange 5.5 to OCS. We set up a profile using the Oracle connector and then go into properties and add the Exchange account. We used this method to move files from the Exchange server to the Oracle server by having both profiles running.

Connection to the Guest Profile using ISE...!!!

Hi,
I'm involved in the rollout for ISE. While trying to connect to the Guest profile using the browser, it gets connected to the Guest profile, after authenticating the credentials. But after some time, the connection gets disconnected automatically and this happens on and on, even if the client is not roaming.
And the second problem is that, when the client roams, it asks for the credentials again to get connected to the Guest profile. Is this the usual behaviour or are there any problems.?
It would be really helpful if someone could help me with this.

About the first problem, please check the "session timeout" timer in your ssid configuration. By default it's 30 minutes so every 30 minutes you would have to re-authenticate. In my deployments I configure this parameter to 12 hours to avoid this kind of problems
About the roaming issue, I think currently this is the normal behavior. I think with ISE 1.2 guest authentication will be improved. I will check on that.
Please rate if this helps

Changing the Status profile in QM

Hi,
The status profile (QM_L_001 - Inspection lot profile1) in the Quality Inspection Lot is been manually entered and saved.
This has set the User Status as IMAT: Material is not correct.
Due to this, unable to do any of the further processing.
In QA02, the Status Profile cannot be changed/deleted.
So how to remove the Status Profile from the Quality Inspection Lot?
Request your help.
Regards,
Sankar.N

Hi
An other workaround, you can go to the transaction BS02 and change the status profile to allow the status can execute the following actions temporarily.
Leon.
Regards.

Different user status profile for network header and activities

Hi everyone!
Is there any way to define different user status profile at network header level and at network activity level? As far as I know, it is only possible to enter a user profile at network type level, and both netwok headers and activities use the same statuses. Does it work this way?
Thanks!
Regards.
Edited by: Thalos on Jul 2, 2011 12:27 AM

Hi Punith, Hi abdul!
Thanks for the reply!
I've gone through the OPSC, but the thing is that here you define a user status profile at network plant level. But I need to define it at network activity level.
The reason why I need this is because we have types of activities. We use network activities for client activities, for internal activities, to identify and follow-up risk management, etc. Each group of activities -since they have different usages- has different user status associated. But as I don't have any way to assign different user status profiles, all the activities have the same statuses, although they will only use some of them.
Thanks!
Regards,
Thalos.

How to assign status profile to components in service order

Hi,
For my business requirement, I want to assign status to individual components planned in the service order. Even though there is a status button on the component tab, there is no config where I can assign the status profile. We can only assign status profile to the order header and the operations and not to components level.
As SAP has provided the status button in the component tab, I am hoping that there is a way to assign the status to the parts planned.
Your help is much appreciated.
Regards,
Ram.

hi all,
It will be helpful if you give any useful tips on maintaining status for the component level in the service order.
regards,
ram.

Status profile (using the tickboxes)

Similar Messages

Maybe you are looking for