Status profiles in SO's and auth

Hi there,
I have a client that requires sales orders to be released. This can be achieved via status profiles. However, the client requires values to be linked to these releases.  For example a sales person can create and release a sales order up to 500k, yet a manager must release it if it exceeds that value.
I have not seen anything in this line for sales. I know there are release strategies for Purchase Orders.
Has anyone had a request like this before?
Regards
Sylvia

there's no equivalent to a MM - release-strategy in SD.
i do not know what your intention with such a thing is ... why block a customer order of any amount? is this about credit limit checking (so to ensure the customer pays for what he gets)?

Similar Messages

  • Different user status profile for network header and activities

    Hi everyone!
    Is there any way to define different user status profile at network header level and at network activity level? As far as I know, it is only possible to enter a user profile at network type level, and both netwok headers and activities use the same statuses. Does it work this way?
    Thanks!
    Regards.
    Edited by: Thalos on Jul 2, 2011 12:27 AM

    Hi Punith, Hi abdul!
    Thanks for the reply!
    I've gone through the OPSC, but the thing is that here you define a user status profile at network plant level. But I need to define it at network activity level.
    The reason why I need this is because we have types of activities. We use network activities for client activities, for internal activities, to identify and follow-up risk management, etc. Each group of activities -since they have different usages- has different user status associated. But as I don't have any way to assign different user status profiles, all the activities have the same statuses, although  they will only use some of them.
    Thanks!
    Regards,
    Thalos.

  • User status profiles for work orders and sub-orders

    Hi Experts,
    I have the following question regarding status profiles for SAP PM work orders (but I guess it relates to all user status profiles).
    Customizing
    A status profile is defined for order type "PM_A", which contains an authorization key "OP" for certain user states (to be set by the ordering party)
    Situation
    The ordering party A creates an order of type PM_A for contractor B, and B then creates a sub-order of type PM_A for contractor C
    Problem
    - If I assign the authorization key "OP" only to roles of party A, then party B can't set the user states reserved for the ordering party (correct for the order A->B, but not for the sub-order B->C)
    - If I assign the authorization key "OP" to roles of party A and party B, then B could set certain user states reserved for the ordering party in the order A->B, which is also wrong
    Question
    Is there a way to restrict sub-orders differently than "non-sub-orders", or do I have to create a "sub-order order-type" for each order type, in order to assign them different status profiles and authorization keys?
    Thanks a lot!

    hi
    since you have 3 roles to be assigned to the same order type with different authorization ,it is better you create an seperate order type for sub order and assign the user status with authorization for B and C
    regards
    thyagarajan

  • Error in activating status profile for SVT

    Hi,
    I've been trying to activate status profile EHS_SO for SVT in REACH compliance version 2.0 . But I am stuck.
    When I save a sales order, a message-'Error when activating status 0001 for status profile EHS_SO in order XXXXXX' has come up. My IMG settings are as follows:
    Sales documentr: No existing status profile used
    Status profile: EHS_SO added with status SD
    Environment parameter:SVT_SO_PROFILE: EHS_SO
                                          SVT_SO_STATUS: 0001 used
    Activate Status profile: STUCK (can't figure out the object type for VBP object type category)
    Does anyone know?

    Hello Bomi,
    Please see SAP note # 1111196. It talks about Status profile for sales order and status profile for production orders for online check for SVT.
    May be useful to you.
    Regards,
    Niraj

  • BAPI_BUS2173_SET_STATUS should be able to set user status profile.

    Hi,
    I need use a workflow to setup user status profile for PHASE and TASK, but I found that the unique easy way to setup the user status profile for PHASE or TASK is manual operation.  I have created a user status profile of the BUS2173 and BUS2175. I can't use BAPI_BUS2173_SET_STATUS function to setup user status profile, but it can be used to setup a user status after the user status profiel has been setup by manuay.
    Why?
    Best regards,
    Arrow Yang.

    Hi,
    Try calling BAPI_BUS2173_SET_STATUS first time for setting the status profile by passing the status profile in iv_status_profile parameter and the phase guid but not passing the user status to the bapi.
    Now after this again call the same bapi, this time just passing the user status and phase guid and not passing anything in the status profile.
    We have used this bapi to set the status profile.
    Regards,
    Simmi

  • Change Status Profile

    When sending a Quotation to a potential Customer we would like the User Status of the Quotation to be of such a nature that i cannot be edited (this to prevent differences of what was originally sent to the Customer and what is actually registered in the system).
    If the Customer ask for a new Quotation we then use a new status (Revised Quotation).
    Is there a way of configuring the User Status so that a Quotation cannot be edited while it's being reviewed by the Customer?
    Kind regards,
    Are

    Hi Are,
    I gues as u want to freeze the screen as soon as a particular User Status is chosen,
    If thats the case, refer to the below steps, wd help you. If not, pls revert wid the detailed requirement:
    This can be done through User Status which is avavilable in the Status Profile.
    For eg if you select a User Status "Won" for a transaction say Lead, the document must get freezed and no changes should be possible for the person who are nt allowed to do so.
    Path for the saem: IMG-CRM-Transactions-Basic Settings-Status Management-Define Status Profile(if you wanna create a new profile, or else Copy the particular Status PRofile for that transactions and configure as per our requirements)
    After Getting in the Profile, Double Click on the particular User Status wherein you need the Doc to get freezed, in the new screen click on Create and in Change Document option check the Forbidden.
    This can take care of your issue, i hope.
    revert if any issues.
    Suji

  • How to change the status profile of equipment?

    Hi Experts,
    Is it possible to change the user status profile for already created equipment? I tried to change the assignment of status profile to equipment category and found it works only for new equipments. It is not applicable to already created equipments. The status of the status profile is already used in equipments.
    Please suggest and do the neeful.
    Thanks and best regards,
    Praveen.

    No you can not change status profile assigned with already created equipment.
    Eg. You assigned status profile 00000003 to equipment category M of equipment. so whnever any new equipment created will get status profile 00000003 only.
    For your case, dont make any change status profile no .00000003--> make whatever changes you have to made about status naming,sequence keeping same status profile.
    After that goto equipment change master edit>change category>selet same category for assignment. so equipment will get same status profile with status changed.
    Hope this will help you.

  • Status Profile and User Status  for Support Message

    Hi All,
    We need to customize Status Profile and User Status Specifc  to customer requriments.
    we need the following Status for Support Message:
    Open
    Accepted
    Rejected
    Fixed
    Retest
    Closed
    Note:
    1] Only the Message creator should be able Set staus Open and Closed
    2]  Message Processor should only set status Accepted, Rejected, Fixed and Retest
    I have created the Status Profile in BS02.
    Can some one help me the steps or guide how to implement the above logic and restrict the status access between Message Creator and Message Processor
    Thanks!
    Regards,
    Pradeep  L

    > 1] Do i have to create different Auth.key for Message processor and Message creator and then assing them in BS02 to Status Profile?
           Anand: Diffrent authorization key for different statues......not for message processor and creator
    > 2] Now how do i assign this Auth.Key to the Auth Object B_USERSTAT?
           Anand: Using Tcode PFCG, this can be done.... Consult Basis.....
    >     do i have to create a new Zrole and assign or is there any other way.
           Anand: Yes u need to create a Z role and include that authorization objects in that z role....
           so u might have to create 2 Zroles and then assign them to the persons concerned....
    Inspire ppl by rewarding
    Regards,
    Anand...

  • How to use the selection profile and status profile for production order?

    Hi expert,
       I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
      Please help me.
      thanks in advance.
      george.shi

    Hi George,
    There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
    We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
    In this status profile,
    1.We define the sequence in which user statuses can be activated,
    2.We define initial statuses
    3. Allow or prohibit certain business transactions.
    Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
    Regards,
    Raja.
    Edited by: Rajarao on Oct 30, 2008 6:21 AM
    Edited by: Rajarao on Oct 30, 2008 6:22 AM

  • Data source and origin of ELM&status profile means

    Hi SAP gurus
      Data source and origin of ELM&status profile means ..

    We did delete and recreate...

  • Reg:BAPI for updation of Progress parameter and status profile

    Hi,
    Can anybody suggest name of BAPI used for updating "progress parameter" & "Status Profile" in actvity.
    With Regards
    Rohit Prakash

    Hi Ammar,
    I have checked both BAPI but BAPI are not working as per our requirement.
    Firstly we wanted to update progress parameter like measurement method(progress version,method plan,method actual) & POC weight into activity but as per BAPI given by you there is no any field available related to measurement method(progress version,method plan,method actual).
    And secondly we wanted to update status profile residing in Activity tab not in network header or WBS.
    Waiting for some more input related to  query.
    With Regards
    Rohit Prakash

  • Status profile at header and item level

    27.11.2007
    Hi friends,
    I have created a status profile at the header with option like CRTD and APPRD. The transaction control is Forbid billing when CRTD and Allow Billing when APPRD. I have attached this profile to the Sales document header.
    At the item level i have created status profile with option like DUE and INST with transcation control Forbid billing when DUE and Allow Billing when INST.
    My problem is when I set the status as APPRD at header, the billing of items with status DUE takes place.
    Please suggest how to restrict billing of items where the Status is DUE.
    Regards,
    Udaynath.

    Dear Lisa,
    In which tab you are maintaining delivery block in the delivery item data or order item data.
    As per my concern there is no field called Delivery Block in the item data of the sales order and delivery.
    In the header data you have.
    I hope it will help you,
    Regards,
    Murali.

  • Follow-up document and Status profile

    Dear experts,
    In CRM, I can create a follow-up quotation from a service process by using the Create Follow-up button.
    I'd like to be able to create a follow-up quotation only for specific statuses in the service process document and to be unable to create a quotation as a follow-up document for the others statuses.
    Can I configure the status profile (user status and transaction control) in order to achieve this result? Any help would be greatly appreciated.
    Thanks in advance,
    Stephanie

    Hi,
    Is there a way to block the creation of a follow-up document for a specific status?
    For example, if status = A or B, i can create a quotation as follow-up document and if status = C, I can't.
    Is it possible via customizing or is it an enhancement?
    Thanks for your help,
    Stephanie

  • Thir Party Sales with Status Profile and Credit Block

    Hello All,
    I have did configuration for Third Party Sales its working fine without Credit Block. The Problem is when I an creating a Sales Order I need to Confirm the Status to Rel and then save the Sales Order. Since the Credit of the Customer Exceeded So Purchase Requsition not created. I released the sales Order using T-Code VKM3 and then checked the Sales Order the Status again changed to Initial Status from Relesed Status and Purchase Requition was also not created.
    Please suggest.......What is to be done.
    Regards
    Tanushree

    Hi,
    Check your status profile setting for status "REL", in customizing ,may be  Credit related transaction maintained for this status
    Transaction-BS02
    Or
    check your ABAper to debug why system resets the status to initial after credit block release
    Thanks
    Chidambaram

  • Status profile and status change in opportunity

    Hi All,
    I have a business requirement to convert an opportunity type from one to another without creating another document
    when user changes the status from in process to approved. Along with converting from OP6 to OP2, I have to change the status to in process also.How can I achieve this in CRM 7.1 version?
    Thanks
    Andy

    The status profile for OP2 and OP5 are different.
    So just by passing OP2 in orderadm_h is giving an error status profile can't be assigned to OP2"
    any suggestions to try some other way?

Maybe you are looking for