Status profilremanagement Urgent plz
hiall,
we have a requirement in campaign the user should not set the status of a campign once it is rejected
we made settings its working fine but the problem is
after rejected status there are some more status having the value higher than rejected status when they are selecting that they are able to change the all statuses including rejected status.
plz tell me how to solve this pbm
its urgent
points will be rewarded
thanks in advance
madhuri
Hi Madhuri,
Your problem can be resolved by maintaing the status numbers in the status profile:
Example of how Lowest Status Number works:
Status A has status number 30 and the 'lowest status number' 10. Status B has status number 40 and the 'lowest status number' 20.
- Once status B was active for the object, only statuses with numbers 20 or higher may be activated, even if status A is currently active.
- However, if status B has never been active, statuses with status numbers 10 or higher may be activated if status A is currently active.
Example of how Highest Status Number:
- Status A has the status number 30 and the 'highest number' 50.
- If status A is active, only statuses with status numbers 50 or less can be activated.
Therefore, while defining your status profile for the status 'Rejected', once you assign a status number for it, make user that other statuses doesn't possess the same number in both Highest Status Number and Lowest Status Number as well.
So according to your current requirement, maintain the status number accordingly to your need. This can be done while defining status profile in the following IMG path:
IMG->Customer Relationship Management->Marketing->Marketing Planning and Campaign Management->General Settings->Change Status Profile for User Status.
Wish this is useful to you
regards
Srikantan
Similar Messages
-
How to install adapters in pi 7.0 ex(tibco adapter) its urgent plz help
hi friends
can any one help me how to insatlll the tibco adapter in pi 7.0 its urgent plz help
thanks in advance
bye
rajaHi Raj,
Is your Sender System Tibco If so Use JMS Adapter to get the Data from tibco and Use IDOC Adapter to Post in R3. For this you no need to Install any Adapter in XI System.
Similar discussions ,
XI integration with Tibco
XI Integration with Tibco EMS (Using JMS Adapter)
Regards
Agasthuri Doss -
How to restrict key board function keys ex:-F10 in forms 6i.urgent plz..
how to restrict key board function keys ex:-F10 in forms 6i.urgent plz..
Hi,
At Form level, write trigger for WHEN_KEY_DOWN, check for F10 and put action as NULL.
Regards,
Amol -
How to restrict fuction keys ex:-F10 in forms 6i.urgent plz..
how to restrict fuction keys ex:-F10 in forms 6i.urgent plz..
If F10 is the Save button, than just simply program key-commit as:
begin
null;
end;BTW: never say URGENT here on the forum. It is considered very impolite! -
Urgent Plz reply: java.lang.Class not found exception
Hi All,
I am novice to j2me, I am tryiing communicate data between client and Java server. I have given project name client and midlet class name FileViewer.java.
It is compiling succesfully
but when I run it , it is giving error
Unable to create Midlet FileViewer.java
java.lang.classnot found excetption: FileViewer.java
at com.sun.midp.midlet.selector.commandaction(+47)
at javax.microedition.lcdui.Display$displayaccessor.commandaction.(+152)
at com.sun.kvem.midp.lcdui.EmulEventHandler$eventloop.run(+459)
Here is the code
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import javax.microedition.io.*;
import java.io.*;
public class FileViewer extends MIDlet implements CommandListener
private Display display; // Reference to Display object
private TextBox tbViewer; // View file contents in a textbox
private Command cmView; // Command to view file
private Command cmExit; // Command to exit
private String url = "http://www.corej2me.com/midpbook_v1e1/scratch/fileViewer.hlp";
public FileViewer()
display = Display.getDisplay(this);
// Define commands
cmView = new Command("View", Command.SCREEN, 2);
cmExit = new Command("Exit", Command.EXIT, 1);
tbViewer = new TextBox("Viewer", "", 250, TextField.ANY);
tbViewer.addCommand(cmView);
tbViewer.addCommand(cmExit);
tbViewer.setCommandListener(this);
public void startApp()
display.setCurrent(tbViewer);
private void viewFile() throws IOException
HttpConnection http = null;
InputStream iStrm = null;
try
// Create the connection
http = (HttpConnection) Connector.open(url);
// Client Request
// 1) Send request method
http.setRequestMethod(HttpConnection.GET);
// 2) Send header information (this header is optional)
http.setRequestProperty("User-Agent", "Profile/MIDP-1.0 Configuration/CLDC-1.0");
// 3) Send body/data - No data for this request
// Server Response
// 1) Get status Line
System.out.println("Msg: " + http.getResponseMessage());
System.out.println("Code: " + http.getResponseCode());
// 2) Get header information
if (http.getResponseCode() == HttpConnection.HTTP_OK)
// 3) Get data (show the file contents)
iStrm = http.openInputStream();
int length = (int) http.getLength();
if (length > 0)
byte serverData[] = new byte[length];
iStrm.read(serverData);
tbViewer.setString(new String(serverData));
Alert alTest = new Alert("Alert Test", new String(serverData), null, null);
display.setCurrent(alTest);
finally
// Clean up
if (iStrm != null)
iStrm.close();
if (http != null)
http.close();
public void pauseApp()
public void destroyApp(boolean unconditional)
public void commandAction(Command c, Displayable s)
if (c == cmView)
try
viewFile();
catch (Exception e)
System.out.println(e.toString());
else if (c == cmExit)
destroyApp(false);
notifyDestroyed();
If some body has knowledge why this error is coming plz share wiht me Its urgent .
Thanks in advance.
ThanxNo, the "-g" version just means it has the debug flag turned on when they compile it.
Your problem is CLASSPATH and how to set it properly.
Use the -classpath option on java.exe when you run. Read the javadocs on the tools to find out how.
% -
Refreshing JEditorPane (Urgent) plz help
hello programmers,
i'm building an html editor:
My html editor has a split pane, the 2 pane got of the split pane are JEditorPanes, one on which i write tag and the other i display them,... thankfully all's working great, my syntax is highlighting and the html is displayed well but i've got the following problem:
when i save a html page , i wanna my browser (on the right side of the slipt pane) to display the html page... it's ok .. it displays it with the method JHTMLEditorPane.setPage(file:/// directory/ file) but the problem is that when i save the page again using the same filename... my html page on the JHTMLEditorPane stays the same... it does not update...
is their a refresh function for the JEditorPane? how can i update my JHTMLPane to reflect the changes i've brought to it? ONe thing , the page changes when i save it by aother file name..... PLz help it's very urgent!!!!!!!
BernardHave you tried to close and then re-open the file in your editorpane after you've saved?
It will work when you change the name because it has to open the file as new. Java can't dynamically update values upon files like C does with pointers. -
Its urgent:plz tel me what is the steps move to produection oaf page.
Hi All,
I developed one oaf page.that page move to production.
i already move to produection but its not working fine.
its throw an error.
plz tell me what is the steps follow when move to production.
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_NO_REGION_DATA. Tokens: REGIONCODE = /wnsgs/oracle/apps/ap/agingbuckets/webui/AgingBucketsPG;
at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:529)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3719)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3452)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1005)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:508)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:429)
at oa_html._OA._jspService(_OA.java:85)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
at oa_html._RF._jspService(_RF.java:102)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
Exception:
oracle.adf.mds.MetadataDefException: Unable to find component with absolute reference = /wnsgs/oracle/apps/ap/agingbuckets/webui/AgingBucketsPG, XML Path = null. Please verify that the reference is valid and the definition of the component exists either on the File System or in the MDS Repository.
at oracle.adf.mds.internal.MetadataManagerBase.findElement(MetadataManagerBase.java:1350)
at oracle.adf.mds.MElement.findElement(MElement.java:97)
at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:503)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3719)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3452)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1005)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:508)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:429)
at oa_html._OA._jspService(_OA.java:85)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
at oa_html._RF._jspService(_RF.java:102)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:534)
Exception:
oracle.adf.mds.MetadataDefException: Unable to find component with absolute reference = /wnsgs/oracle/apps/ap/agingbuckets/webui/AgingBucketsPG, XML Path = null. Please verify that the reference is valid and the definition of the component exists either on the File System or in the MDS Repository.
at oracle.adf.mds.internal.MetadataManagerBase.findElement(MetadataManagerBase.java:1350)
at oracle.adf.mds.MElement.findElement(MElement.java:97)
at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:503)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3719)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3452)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1005)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:508)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:429)
at oa_html._OA._jspService(_OA.java:85)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
at oa_html._RF._jspService(_RF.java:102)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:534)
thanks
Seshu.
Edited by: its urgent on Feb 8, 2012 2:31 AMDeployement steps:
1) Copy the Class files and move to into server
We can get class file >>F:\OAF\jdevhome\jdev\myclasses\imp
\myprojects
(imp) Load into server (java TOP) >>D:\oracle\viscomn\java\
2) Run the XML import Scripts in Command Prompt
F:\OAF\jdevbin\jdev\bin
For every Page and every Lov region
3) Next Go to apps
System administrator Create Function for a page
Description tab:
Function Name : IMP_STUDENT_REGISTRATION
User Function Name: Imp Student Registration
Description : Imp Student Registration
Properties Tab:
Type: SSWA JSP function
WebHTML Tab
Function:
HTML call: OA.jsp?page=/imp/oracle/apps/po/student/webui/ImpStudentResitrationPG
Note: DO the same for all the pages
4) Attach these Functions to Imp Student Operations menu to Imp Student Operations responsibility to User.
5) Bounce the apache.
Regards
Meher Irk -
hi gurus,
i have a problem in bdc programm there is 3 screen using transaction f-27
there is two amount field as(wrbtr,wrbtr2)
two screen are run fine but the 3 screen does't take data automatically from flat file plz help me its urgent see my codes and give me solution.
TYPES: BEGIN OF it_output,
bldat(10) TYPE C, "Document Date
blart TYPE bkpf-blart, "Document Type
bukrs TYPE bkpf-bukrs, "Company Code
budat(10) TYPE C, "Posting Date
monat TYPE bkpf-monat, "Period
waers TYPE bkpf-waers, "Currency
xblnr TYPE bkpf-xblnr, "Reference Field
docid TYPE fs006-docid, "Document ID
newbs TYPE rf05a-newbs, "Posting Key
newko TYPE rf05a-newko, "Account Code
wrbtr(16) TYPE C, "Amount in Document currency
zfbdt(10) TYPE C, "Baseline Date
newbs2 TYPE rf05a-newbs, "Account Key2
newko2 TYPE rf05a-newko, "Account code2
wrbtr2(16) TYPE C, "Amount2
END OF it_output.
DATA lt_output TYPE it_output OCCURS 0 WITH HEADER LINE.
DATA it_bdc LIKE bdcdata OCCURS 0 WITH HEADER LINE.
DATA it_messtab LIKE bdcmsgcoll OCCURS 1 WITH HEADER LINE.
D A T A *
DATA: message TYPE string.
DATA: p_file1 type string.
S E L E C T - O P T I O N S / P A R A M E T E R S *
SELECTION-SCREEN BEGIN OF BLOCK block0 WITH FRAME.
PARAMETERS : p_file LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF BLOCK block0.
A T S E L E C T I O N - S C R E E N *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
static = 'X'
mask = space
CHANGING
file_name = p_file.
S T A R T - O F - S E L E C T I O N
START-OF-SELECTION.
PERFORM upload.
PERFORM bdc.
PERFORM write_message.
*& Form bdc
text
FORM bdc.
LOOP AT lt_output.
READ TABLE lt_output INDEX 1.
PERFORM bdc_dynpro USING 'SAPMF05A' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RF05A-NEWKO'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM bdc_field USING 'BKPF-BLDAT' lt_output-bldat.
PERFORM bdc_field USING 'BKPF-BLART' lt_output-blart.
PERFORM bdc_field USING 'BKPF-BUKRS' lt_output-bukrs.
PERFORM bdc_field USING 'BKPF-BUDAT' lt_output-budat.
PERFORM bdc_field USING 'BKPF-MONAT' lt_output-monat.
PERFORM bdc_field USING 'BKPF-WAERS' lt_output-waers.
PERFORM bdc_field USING 'BKPF-XBLNR' lt_output-xblnr.
PERFORM bdc_field USING 'FS006-DOCID' lt_output-docid.
PERFORM bdc_field USING 'RF05A-NEWBS' lt_output-newbs.
PERFORM bdc_field USING 'RF05A-NEWKO' lt_output-newko.
PERFORM bdc_dynpro USING 'SAPMF05A' '0302'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RF05A-NEWKO'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM bdc_field USING 'BSEG-WRBTR' lt_output-wrbtr.
PERFORM bdc_field USING 'BSEG-ZFBDT' lt_output-zfbdt.
PERFORM bdc_field USING 'RF05A-NEWBS' lt_output-newbs2."newbs2
PERFORM bdc_field USING 'RF05A-NEWKO' lt_output-newko2."newko2
PERFORM bdc_dynpro USING 'SAPMF05A' '0301'.
PERFORM bdc_field USING 'BDC_CURSOR' 'BSEG-WRBTR'.
PERFORM bdc_field USING 'BDC_OKCODE' '=BU'.
PERFORM bdc_field USING 'BSEG-WRBTR' lt_output-wrbtr2."wrbtr2
PERFORM bdc_field USING 'BSEG-MWSKZ' '**'.
PERFORM bdc_field USING 'BSEG-ZTERM' 'C007'.
PERFORM bdc_field USING 'BSEG-ZBD1T' '7'.
CALL TRANSACTION 'F-27' USING it_bdc mode 'A'
MESSAGES INTO it_messtab.
CLEAR it_bdc. REFRESH it_bdc.
ENDLOOP.
ENDFORM. "bdc
*& Form write_message
text
FORM write_message.
LOOP AT it_messtab .
CLEAR message.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = sy-msgid
lang = 'EN'
no = sy-msgno
v1 = sy-msgv1
v2 = sy-msgv2
v3 = sy-msgv3
v4 = sy-msgv4
IMPORTING
msg = message.
CASE it_messtab-msgtyp.
WHEN 'S'.
WRITE:/ message.
CLEAR message.
WHEN 'E'.
FORMAT COLOR 6 ON.
WRITE:/ message.
CLEAR message.
ENDCASE.
ENDLOOP.
ENDFORM. "write_message
FORM BDC_DYNPRO *
--> PROGRAM *
--> DYNPRO *
FORM bdc_dynpro USING program dynpro.
it_bdc-program = program.
it_bdc-dynpro = dynpro.
it_bdc-dynbegin = 'X'.
APPEND it_bdc.
CLEAR it_bdc.
ENDFORM. "BDC_DYNPRO
FORM *
FORM bdc_field USING fnam fval.
it_bdc-fnam = fnam.
it_bdc-fval = fval.
APPEND it_bdc.
CLEAR it_bdc.
ENDFORM. "BDC_FIELD
*& Form upload
text
--> p1 text
<-- p2 text
FORM upload .
p_file1 = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_file1
FILETYPE = 'DAT'
tables
data_tab = lt_output
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " upload
i am also send u my flat file the client says that in amount filed of 3rd screen we will give the * asterick or other amount plz take it.
thank
plz help me.
jay
Edited by: jayant kumar on Apr 30, 2008 12:42 PMhi jayant,
Declare '**' as a character constant and pass this constant to the Subroutine.
data : c_astrick type char2 value '**'.
PERFORM bdc_field USING 'BSEG-MWSKZ c_astrick.
Reward points if it is helpful.
Regards,
srilatha. -
Jaxrpc compilation exception(plz Help very Urgent Plz)
Hello there....
while deploying a simple webservice using deploytool i m getting this error while the application that is being deployed is not even using ejbs....
i m trying to compile the example given on the forum by Qusay H. Mahmoud, so plz help me to get out from this......
Thank u ....alll
distribute: C:\Sun\AppServer\apps\Add.war
deployment started : 0%
Deploying application in domain failed; Error while running ejbc -- Fatal Error from EJB Compiler -- jaxrpc compilation exception
; requested operation cannot be completed
!!! Operation Failed !!!
!!! With The Following Failure Messages !!!
Deploying application in domain failed; Error while running ejbc -- Fatal Error from EJB Compiler -- jaxrpc compilation exception
; requested operation cannot be completed
Error while running ejbc -- Fatal Error from EJB Compiler -- jaxrpc compilation exception
[Completed (time=24.0sec, status=13)]
**********************************************************************I had a similar problem with Sun App Server.If you can check the domain/log/Server.log.It explains a valid endpoint address is missing in the deployment.To do this open the deployment tool and click the Implementation class in the tree(Bean Shaped).
You can see a endpoint tab within which you need to configure the Endpoint address.
The deployment went fine after this.
Good Luck !!! -
Problem in a webdynpro abap component - Really very urgent PLZ help me
Hi Experts,
I am working with FITV_POWL_TRIPS webdynpro component.In that my requirement is to keep a button and input fields near the create travel request button and to add some functionalities.
I worked in the component , unfortunately the component get corrupted. i don't know how to retrieve the component to its original state.I tried with version management but no use.
Can anybody suggest me how to retrieve the component. Any of your inputs is valuable to me.
if the patch should be installed is the only way mean plz tell me the patch details.
Actually FITV_FPM , this component get damaged. This component is under FITV_POWL_TRIPS.
Regards,
Ramanan
Edited by: Ramanan Panchabakesan on Jul 9, 2008 12:10 PMDear Thomas,
Really i failed to use the enhancement mode to work with that POWL component.Actually the thing i did is added an attribute directly to the component controller of that component and binded it to the drop down then activated , it shows some error "Configuration missing error" so again i deleted that attribute and reactivated it again but it shows the same error. so i tried to retrieve it back from version.But failed, then compared with other system the methods and attributes are same as it is.Finally copied the methods and code from that system though all are same in two systems, then activated.No error now.But clicking on the "create request" button the component shows a road map step with 1 as completed status.It looks with the following information
Fite_Request
1
Completed
and with two buttons one is disabled and thats capiton is Previous step and the other is exit that is enabled
when i clicked that exit button it again goback to the intial screen of FITV_POWL_TRIPS.
Before it shows with some 3 or 4 road map steps with some different status.
Tell me any other way to retrieve it.As the patch to be reinstalled is the solution means please tell in which patch this resides.Technically i want to retrieve it, going for patch update is secondary and i go for that if and only if there is no other way.
with hope and regards,
Ramanan.P
Edited by: Ramanan Panchabakesan on Jul 15, 2008 7:34 AM -
Cannot set status of Urgent Change after manual transport
Hi all,
We are usng CHARM in Solution Manager 7.1 for import to the SAP ECC (EHP6) systems.
I cannot set the status of the Urgent Change document (ZMHF) to status "To be Tested" after the transports were manually released and manually imported to the ECC QA system.
When I use action "Pass Urgent Change to Test", the system stopped with error "Not all task are yet released" and will not change the status .
Based, on the Task List log, the system started the release process although no transports were released.
Is there any way that I can update the status of the Urgent Change document to "To be Tested"?
I tried program CRM_SOCM_SERVICE_REPORT but still did not change the status.
Any suggestion?
Thanks,
TessHi Venu,
have a look under System Administration - System Configuration -- Knowledge Management -- Configuration --Content Management -- User Interface -- Commands -- UI Command Groups -- StatemanagementGroup.
See Java class: com.sapportals.wcm.rendering.uicommand.cm.UIStatemanagementGroupCommand. Take the class and decompile this and everything needed around to understand how this class works.
Then you can choose to extend this CommandGroup to also have a command "Resubmit for Approval" or you can implement your own UI Command only for resubmitting (you will also have to activate your command (group) by settings within the configuration).
On the other hand, if all this is completely new to you, I'm a bit sceptical if the task isn't a bit too big as a first task on KM implementation topics...?
Hope it helps
Detlev -
RECORDING WITH F-32 .......ITS URGENT PLZ HELP ME
HI GUYS
HERE IS MY REQUIREMENT
I WANT TO DO A RECORDING USING F-32 AND I HAVE TO DO THE FOLLOWING WAYS
1- ENTER ACCOUNT
2-COMPANY CODE
3-CLEARING DATE
4-OPENITEM SELETION
5-I HAVE TO SELECT THE REFERENCE RADIO BUTTON
HERE IS MY ERROR , I DONT KNOW WHAT ARE THE VALUE I HAVE TO ENTER IN THE REFERENCE FIELD AND HOW TO PROCEED ,PLZ HELP ME IT IS VERY VERY URGENT FOR ME.
THANKS A LOT
MRUTYUNThis should get you started:
FORM clearing USING p_purch_order
p_cus
p_ven.
DATA: okcode(3).
CLEAR bdcdata.
CLEAR messtab.
REFRESH bdcdata.
REFRESH messtab.
MESSAGE s205 WITH 'Clearing A/R Invoice to Invoice Receipt.'.
PERFORM dynpro USING:
'X' 'SAPMF05A' '0131', "Clear Customer: Header Data
' ' 'RF05A-AGKON' bill_to,
' ' 'BKPF-BUDAT' today_ch,
' ' 'BKPF-BUKRS' 'UOFT',
' ' 'BKPF-WAERS' 'CAD',
' ' 'RF05A-XNOPS' 'X',
' ' 'RF05A-XPOS1(2)' 'X',
' ' 'BDC_OKCODE' '/16'. "Process Open Items
PERFORM dynpro USING:
'X' 'SAPMF05A' '0730', "Amount popup
' ' 'BDC_OKCODE' '/16'. "Process Open Items
PERFORM dynpro USING:
'X' 'SAPMF05A' '0730'. "Press enter
PERFORM dynpro USING:
'X' 'SAPMF05A' '0710',"Clear Customer: Enter selection criteri
' ' 'RF05A-AGBUK' 'UOFT',
' ' 'RF05A-AGKON' bill_to,
' ' 'RF05A-AGKOA' 'D',
' ' 'RF05A-XNOPS' 'X',
' ' 'RF05A-XMULK' 'X',
' ' 'RF05A-XPOS1(1)' 'X',
' ' 'BDC_OKCODE' '/16'. "Process Open Items
PERFORM dynpro USING:
'X' 'SAPMF05A' '0609', "Additional Accounts popup
' ' 'RF05A-AGKON(1)' p_ven,
' ' 'RF05A-AGKOA(1)' 'K',
' ' 'RF05A-XNOPS(1)' 'X'.
PERFORM dynpro USING:
'X' 'SAPDF05X' '1102', "Clear Customer: Select open item
' ' 'BDC_OKCODE' 'OMX'. "Select all
PERFORM dynpro USING:
'X' 'SAPDF05X' '1102', "Clear Customer: Select open item
' ' 'BDC_OKCODE' '/6'. "Inactive
PERFORM dynpro USING:
'X' 'SAPDF05X' '1102', "Clear Customer: Select open item
' ' 'BDC_OKCODE' '/6'. "Find
PERFORM dynpro USING:
'X' 'SAPDF05X' '2000', "Select search criteria popup
' ' 'BDC_OKCODE' '/24'. "Next page
PERFORM dynpro USING:
'X' 'SAPDF05X' '2000', "Select search criteria popup
' ' 'RF05A-XPOS1(10)' 'X'. "Allocation
PERFORM dynpro USING:
'X' 'SAPDF05X' '0731', "Search for Allocation
' ' 'RF05A-SEL01(1)' p_purch_order. "PO
PERFORM dynpro USING:
'X' 'SAPDF05X' '1102', "Clear Customer: Select open item
' ' 'BDC_OKCODE' 'OMX'. "Select all
PERFORM dynpro USING:
'X' 'SAPDF05X' '1102', "Clear Customer: Select open item
' ' 'BDC_OKCODE' '/05'. "Active
IF p_test = space.
okcode = '/11'. "save
ELSE.
okcode = 'BS'. "simulate
ENDIF.
PERFORM dynpro USING:
'X' 'SAPDF05X' '1102',
' ' 'BDC_OKCODE' okcode. " save or check
IF p_test NE space. "exit from screen after check
PERFORM dynpro USING:
'X' 'SAPMF05A' '0700',
' ' 'BDC_OKCODE' '/15'. "Save or check
PERFORM dynpro USING: "popup
'X' 'SAPLSPO1' '0200',
' ' 'BDC_CURSOR' 'SPOP-OPTION1'. "choose yes
ENDIF.
CALL TRANSACTION 'F-32' USING bdcdata MODE u_mode UPDATE 'S'
MESSAGES INTO messtab.
PERFORM get_message TABLES messtab USING text 'CL'.
IF text IS INITIAL.
PERFORM batch_input USING 'F-32'.
ENDIF.
ENDFORM. " CLEARING
Rob -
Urgent plz help me out about cartesian product
plz...its urgent,can anyone help in the following query where iam getting cartesian product,so how to get result without cartesian product
this is the query
SELECT DISTINCT MIS.segment1 "ITEM CODE",
MIS.DESCRIPTION "DESCRIP"
,MIS.Primary_uom_code "UOM",
MTL.LOT_NUMBER "LOT NUMBER"
,A.PARTY_NUMBER "CUSTOMER NUMBER",
A.PARTY_NAME "CUSTOMER NAME",
(A.ADDRESS1||A.ADDRESS2||A.ADDRESS3||A.ADDRESS4) "SHIP TO",
B.DELIVERY_DETAIL_ID "DO NO",B.SHIPPED_QUANTITY "SHIPPED QUANTITY"
,C.ULTIMATE_DROPOFF_DATE "ISSUED DATE"
,D.ORDER_NUMBER "SALES ORDER NUMBER"
,E.LINE_NUMBER "SALES ORDER LINE"
FROM MTL_SYSTEM_ITEMS MIS
,MTL_TRANSACTION_LOT_NUMBERS MTL
,HZ_PARTIES A,
WSH_DELIVERY_DETAILS B,
WSH_NEW_DELIVERIES C,
OE_ORDER_HEADERS_ALL D,
OE_ORDER_LINES_ALL E
WHERE MIS.INVENTORY_ITEM_ID=MTL.INVENTORY_ITEM_ID
AND B.INVENTORY_ITEM_ID=MIS.INVENTORY_ITEM_ID
AND A.PARTY_ID=B.CUSTOMER_ID
AND B.DELIVERY_DETAIL_ID=C.DELIVERY_ID
AND MIS.INVENTORY_ITEM_ID=E.INVENTORY_ITEM_ID
AND D.HEADER_ID=E.HEADER_IDA lot of times when I get duplicate results, I'll do a select * and see why. Often one of those tables will have a sequenced value that could repeat several times for a combination of values.
If thats the case, you may need to add something like:
...and a.id = (select min(id)
from b
where a.col = b.col) -
How to get & use xml data with jstl libraries? (URGENT PLZ)
I am using jstl to get and use xml data
I needs to perform operations on the parsed xml document with other libraries of jstl. How can i do that.
I used Dom variable to parse my document as:
<x:parse varDom="test"> <c:import url="project.xml"/> </x:parse>
where my project.xml is:
<?xml version="1.0" encoding="iso-8859-1"?>
<project> <projectName>myProject</projectName> </project>
I can dislay this value in html by
<x:out select="$test/project/projectName"/>
But I need a string value sotred in variable such as <c:set var="pname" value="???">
HOW CAN I SET THIS VALUE IN CORE VARIABLE THAT IS, USING <c:set...> SO THAT IT CAN BE USED ANYWHERE IN JSP PAGE TO CONCATE RETURNED STRING IN OTHER STRING VARIABLES DEFINED BY CORE LIB?
Jessy
Message was edited by:
jessy
Message was edited by:
jessyI believe that <c:set> should do that but i am facing problem in it. Look into this jsp scriptlet:
1-<x:parse varDom="test"> <c:import url="project.xml"/> </x:parse>
2-<x:set var="ds" select="$test/project/projectName"/>
3-<x:out select="$ds"/> <br>
4-<c:set var="tt" value="${ds}" />
5-<c:out value="${tt}" />
In line 3 variable ds returns: myProject
In line 5 variable tt returns: [[projectName: null]]
perhaps on line 4 ds is storing some array to tt and i am not calling correct array element. I tried many options but still could not find solution. Plz Plz do something urgent for me. Thanks
Jessy
Message was edited by:
jessy -
MySQL connectivity Problem URGENT plz
Hi
plz can any one help me... its urgent
i need java to connect to MySQL database.with mm.mysql.Driver
the following sample code is just copied from the site and made changes in hostname, dbname and username.
classpath has been given correctly for the mm.mysql.Driver package (mysql.jar).
Thanx in advance....
Result
compilation --> success
while executing i get the following Error.
java.sql.SQLException: General Error: null
at org.git.mm.mysql.connection.<init>(Connection.java)
at org.git.mm.mysql.Driver.connect(Driver.java)
at java.sql.DriverManager.getConnection(DriverManager.java: 515)
at java.sql.DriverManager.getConnection(DriverManager.java: 197)
at JDBCDemoCreate.getConnection(JDBCDemoCreate.java: 36)
at JDBCDemoCreate.<init>(JDBCDemoCreate.java: 14)
java.lang.NullPointerException
at JDBCDemoCreate.<init>(JDBCDemoCreate.java: 17)
at JDBCDemoCreate.main(JDBCDemoCreate.java: 47)
Here is the code. can any one try this !
// JDBCDemoCreate.java
1. import java.util.*;
2. import java.sql.*;
3.
4. public class JDBCDemoCreate {
5.
6. private static final String hostname = "hostname";
7. private static final String port = "3306";
8. private static final String database = "dbname";
9. private static final String username = "username";
10. private static final String password = "";
11.
12. public JDBCDemoCreate() {
13.
14. Connection c = getConnection();
15.
16. try {
17. Statement s = (Statement)c.createStatement();
18. s.executeUpdate("CREATE TABLE rich ( id int primary key, name char(25) )");
19. } catch ( Exception e ) {
20. e.printStackTrace();
21. }
22.
23. }
24.
25. private Connection getConnection() {
26 // Register the driver using Class.forName()
27. try {
28. Class.forName("org.gjt.mm.mysql.Driver").newInstance();
29. } catch ( Exception e ) {
30. e.printStackTrace();
31. }
32.
33. // ask the DriverManager for a connection to the database
34. Connection conn = null;
35. try {
36. conn = DriverManager.getConnection("jdbc:mysql://" + hostname +
37. ":"+ port +"/" + database +
38. "?user=" + username +
39. "&password=" + password );
40. } catch (Exception e) {
41. e.printStackTrace();
42. }
43. return conn;
44. }
45.
46. public static void main( String[] args ) {
47. new JDBCDemoCreate();
48. }
49.}Hi!
You can try with this code coz, i worked with this code only and then i can talk to the database.
Connection con;
Class.forName("org.gjt.mm.mysql.Driver";
con = DriverManager.getConnection("jdbc:mysql:///db?user=root&password=");
Try it out!
Queries regarding this is welcome. Either in this forum itself or u can contact in the mail, the id is
[email protected]
Regards,
dinesh
Maybe you are looking for
-
ITunes icon on my PC won't open anymore...
I'm miserable. I'm trying to move my ipod music from my itunes app onto my iphone. In the process I somehow managed to make it so that when I double click on my itunes icon on my pc, it no longer opens up. I reinstalled QuickTime Player, but nothi
-
I cannot find my HP Truevision HD webcam anywhere ... i've looked at the device manager and there is also nothng there.
-
Doing a clean install to sell my PowerBook
I am selling my 12" PowerBook to move up to a MacBook. I will want to erase and install OS X Tiger, but I also have the install disk for iLife '06. Can I install both yet not have to register and set up a user account, so that when the person buying
-
File parent directory changed-is there an easy fix?
Our network administrator recently upgraded our server and renamed our workstations. As a result all my Dreamweaver files are now located in a new directory. Previously: F:\My Documents\Web Site\Image145 Now: E:\KKWG\My Documents\Web Site\Image145 Ea
-
Regarding data conflict at Query Report
Hi Experts, I have an issue like at R3 side the currency field data is showing as 9,999,999.000., when it came to BW side it is showing data as 9.999.999,000. But in my report i need to show R3 side data only. Infoobject is defined as currency with d