Status Report Preview Error in cProjects

Hi Experts,
I have created one Project Type in cProjects, with reference to Project Type i have created Project with all the elements. Next step is i want to see the Status Report of my Project. When i press Preview button i am getting the following error message:
"Error occurred when generating the print preview (function module: /1BCDWB/SM00000010)
ADS: SOAP Runtime Exception: CSoapExceptionTransport :(100101)  "
Kindly help me in resolving the above issue. Thanks in Advance.
regards,
Sridhar.
Edited by: SridarReddy on Dec 1, 2009 9:33 AM

Hi Daniel,
I have the same problem.
When i press Preview button i am getting the following error message:
"Error occurred when generating the print preview (function module: /1BCDWB/SM00000010)"
Could you please tell me what configuration changes you have done on ADS server?
Regards
Ramesh

Similar Messages

  • Error Logging in B2B Business Message Status Reports and Error Reports.

    Hi,
    Could someone please let us know as to how the error messages are being shown up in the b2b frontend in the Business Message Details Report and Error Reports.
    In some of the cases the error message logging is not happening properly and even against the valid transaction block the entire iAudit Report or the B2B Analyzer report is getting posted .
    In some cases the error message is logged as AIP-51505: General Validation Error (for the transaction block which is valid and having no errors)
    Is there any way from the b2b backend these error messages and business messages could be traced or is there any other way wherein the proper and relevant error messages could be tracked from B2B.
    Thanks
    Sachin.

    Hello,
    Business message status reports identify business message instance details.These details include the sending and receiving trading partners, exchange protocol,document protocol, business action and its state, message date, and message details.
    Error status reports identify error message details. These details include the error code, error text, business message identification, message date, and message details.
    Please fix up a telecon to 918041086150 for further discussion on the same.
    Rgds,Ramesh

  • Crystal Report Previewing Error

    Dear Experts,
    After previewing the Crystal Reports, the error message shown like this:
    http://i775.photobucket.com/albums/yy34/erpkenny/CrystalReport_jpg_02JUL.jpg/
    Please kindly help me!
    Thanks!
    Kenny

    hi,
    Check the below link:
    Application has a problem - Printing Problem
    Thanks,
    Neetu

  • Crystal Report Preview Error

    Dear Experts,
    When i am  taking preview of the marketing documents like SO/SQ/PO which are done in Crystal report
    I am getting the following error. This is happening after we increased the Document series size from 10001 to 1410001
    If we check the previous documents starting from 10001 its coming correctly, only for the documents starting from 1410001 this error has occurred
    However when we click the PDF icon the full number is  properly shown
    What changes need to be done in DOCNUM in the Crystal report layout ,please let me know.
    Thanks & Regards
    Darshan Desai

    Hi,
    Not sure below SAP note is related to your problem.
    1933329 - CR_Error "Object reference not set to an instance of an
    object"
    Thanks & Regards,
    Nagarajan

  • Project Status Report - cProjects 4.0 - Run time error

    Under Basic Settings, I go to 'Forms for Printing and for Project Status Reports'. Here, under 'Create PDF-Based Forms', I select the form 'DPR_STATUS_REPORT_AIF' and Activate it. I then get to 'Activate Forms per project type'.I get to 'New Entries' and add 'DPR_STATUS_REPORT_AIF' and also set the 'Active' and 'Status Rpt' checked.
    When I get to cProjects front end, I see the 'Project Status Report' template under the 'Status Report' tab. However, when I click on the 'Preview' button, I get to see a dump.
    "The following error text was processed in the system SRP : WebDynpro Exception: SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP send returned with status code(100.101)"
    Can someone please suggest how to get something useful at the click of the preview button?
    Thanks.

    Hi,
    Yes your basis team should tell you more about this. ADS Credential needs to be installed on the java stack of your cProjects Server. For this you will have to send a message to SAP requesting for the ADS Credential. You will then receive a credential file with its password.
    However not all servers support ADS. There is a list of server names that support ADS. You can get the server name on which cProjects is installed from your basis team and I shall let you know if it is supported or not. You can also have a look at in the PAM (Product availability Matrix) for SAP NetWeaver 2004s - Additional Components at http://service.sap.com/pam
    Regards,
    Reema.
    <i>Pl award all useful answers.</i>

  • Project Status Report - cProjects 4.0

    Hi all,
    I am using cProjects 4.0.
    After selecting the PDF Print form DPR_STATUS_REPORT_AIF for the project type and marking 'Active' and 'Status' report checkboxes, when I go to create Status reports, I can see the template "Project Status Report". However, when I click on the "Preview" button, I get a runtime error saying
    "The following error text was processed in the system DRP : WebDynpro Exception: SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP server replied with status code 500(100.101). "
    Can someone suggest please?

    Hi,
    Are you able to open any other pdf forms in cProjects. for eg. approval document?
    I guess you need to get the exact location of error.
    After the system gives a dump, run transaction ST22 and  get the program/function name where the error is actaully occuring.
    Regards,
    Reema.
    PS. pl. award points to all useful answers.

  • CProjects 4.0 - Status Report  Problem

    Hi all,
    I am using cProjects 4.0.
    I have selected the PDF Print form DPR_STATUS_REPORT_AIF for the project type. I have also marked the Active and Status report checkboxes.
    Now, when I go to create Status reports, I can see the template "Project Status Report". However, when I click on the "Preview" button, I get a runtime error saying <i>"OBJECTS_OBJREF_NOT_ASSIGNED_NO"</i> in the ABAP program "CL_WD_ADOBE_SERVICES" in the method "CREATE_PDF".
    Pl help provide a solution to this.
    Regards,
    Reema.

    Hi all,
    I am using cProjects 4.0.
    After selecting the PDF Print form DPR_STATUS_REPORT_AIF for the project type and marking 'Active' and 'Status' report checkboxes, when I go to create Status reports. I can see the template "Project Status Report". However, when I click on the "Preview" button, I get a runtime error saying
    "The following error text was processed in the system DRP : WebDynpro Exception: SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP server replied with status code 500(100.101). "
    Can someone suggest please?

  • CProjects Status report not visible

    Hi
    I am trying to disply the project status report but unable to do so.
    When I click on Preview butttonto display status report, new screen opens with Save, Save and Send and cancel button but could not see report there.
    Is there anything missing with JAVA applate setting?
    Working on ECC6 server.
    Thanks and Regards,
    Niraj Sikligar

    Hi Niraj,
    Run the following reports in Transaction SE38
    1. FP_PDF_TEST_00
    specify connection as ADS
    This should return certain version information. If this is succesfull go for the next one.
    2. FP_TEST_IA_01
    Keep everything on the selection screen as it is and execute.
    Note: If you get an error that says: "Cannot find PDL type for output device LOCL",
    Open the report in SE38 in display mode.
    Navigate to the source code:
    * Set output parameters and open spool job
    fp_outputparams-preview  = 'X'.    " do not launch print preview
    fp_outputparams-nodialog = 'X'.      " suppress print dialog
    fp_outputparams-connection = p_conn.
    Place a session break-point on
    fp_outputparams-connection = p_conn.
    and then execute the report (F8).
    When it stops at the break-point, double click on fp_outputparams-nodialog  and remove the X on it.
    (you may take help from a technical guy here)
    Continue by pressing F8.
    A print pop-up will appear, change output device from LOCL to PDF1 and continue (F8).
    Check wether a form is displyed or not.
    Regards,
    Reema.

  • Cannot load project status report in cprojects on portal

    Hi,
    I have checked all the FP_* adobe test programs and my ADS is working fine. I did test my form in ECC transaction code sfp and the form loads properly.
    But, when I try to load the project status report(same form) through portal (cprojects)it is giving me connection timeout error.
    Could somebody guide me?
    Thanks.

    Hello,
    there can be several reasons why the Statusreport does not come up
    a) ACF component is not installed correctly
    Check as described in note [766191|https://service.sap.com/sap/support/notes/766191] if the  ACF is installed correctly
    b) ADS is not set up correctly
    Check as described in note [944221|https://service.sap.com/sap/support/notes/944221] if the ADS is installed correctly
    c) cProjects config for the status reports is not set up correctly
    Check as described in note [978997|https://service.sap.com/sap/support/notes/978997] if your system is set up according to the configuration guide
    Best Regards, Andrea
    Edited by: Andrea Langlotz on Jun 11, 2008 8:55 AM

  • Cannot see project status report pdf inside cprojects using Firefox

    Hi,
    I am using firefox software to view project status report in cprojects. It shows me blank.
    But if I view Approval document, the pdf shows correct in the browser.
    As you might be aware,Please note these pdf reports display inside the webpage area,so please donot reply with solutions of opening pdf in separate browser window etc.
    Please help

    Hi,
    Are you able to open any other pdf forms in cProjects. for eg. approval document?
    I guess you need to get the exact location of error.
    After the system gives a dump, run transaction ST22 and  get the program/function name where the error is actaully occuring.
    Regards,
    Reema.
    PS. pl. award points to all useful answers.

  • CProjects Project status report not generated

    Hi
    I am facing problem of getting Project status report for a project in cProjects 4.0
    I am at client side and accessing the IDES ECC6.Her I am trying for getting Project status report for the project created.
    The error I am getting is :
    "WebDynpro Exception: ADS: Request start time: Thu Aug 21 16:53:27 GMT+03:00 2008(200,101). "
    In customizing for cProjects I have used the std. form available for the same, activated the same for the project type and when tried to get the report I got the above mentioned error.
    Then in se38 I executed the programme FP_TEST_IA_01 the result was :
    ADS: Request start time: Thu Aug 21 17:23:42 GMT+03:00 2008(200,101)
    Also I have activated the following services
    SICF->Services->default_host->sap->bc->fp and fpads, both are active.
    But still I am not getting project status report from cProjects.
    Please guide me what else should I do to get the project status report?
    Thanks and Regards,
    Niraj Sikligar

    Hi Reema,
    Its great to hear from you.
    I have run the report : FP_PDF_TEST_00
    Out put is :
    Version Information:                705.20060620101936.310918
    What does that mean ?
    Secondly,
    I have checked RFC destination for ADS the results were as shown below:
    On Technical Settings tab page :
    target host: ides
    Path prefix: /AdobeDocumentServices/Config?style=rpc
    Is this OK?
    Is there anything else to be done?
    Regards,
    Niraj Sikligar

  • Status Reports in cProjects

    Hi All,
    I am using cProjects 4.0. I have tried to create a "New Status Report" using Template "Project Status Report" on the Status Reports Tab page. Then clicked on the Preview button. Now I am getting a blank page with "Save", "Save and Send" and Cancel button at the top. But when I try to save it, its not saving the Status report also no message is generated.
    Therefore I could not generate status report.
    Again if I want to "Save and Send" then it it asking for the Recipients Email Id assigned to the User address. But should merely maintaining the Email id in the user address be sufficient enough to send Email to external Ids ? What are the additional configs we need to do ?
    I have done the PDF form assignment to the project type and also activated it.
    Pls help me out.
    Warm regards
    Purnendu

    Hi all, i resolved  the problem ....
    you have to check those notes...Note 944221 .. Note736902..Note 702438.
    and then check all the ADS config because it´s very easy to have problems with the User and passwords config of the ADSUSER ( Note 894009 ).
    Hope this will be usefull.
    Regards,
    Diego.

  • CProjects 4.0 - Status Report

    Hi all,
    I have activated the following forms for a project type:
    <b>DPR_STATUS_REPORT_HTML
    DPR_STATUS_REPORT_PDF
    DPR_FORM_STATUS_REPORT</b>
    Also I have Checked the Status Reports checkbox in the Project type because of which I can see the Status report tab in the particular project type.
    However, when I say create status report I get the following error message:
    <i><b>No templates for status reports have been entered for the project type</b></i>
    Regards,
    Reema

    Hi.
    Did you find a solution for the problem described (e.g. the shortdump received after pressing the Preview button) for the Project Status Report?
    We have the same error in my project.
    Regards / Anders
    Ps.
    The preparations done is that
    a) status reports are activated in the project type used
    b) the PDF print form DPR_STATUS_REPORT_AIF is ticked as active and a status rpt in the IMG step "Activate forms per Project Type".

  • Task status  report in cProject 3.1

    Hi,
    I want to extract task status report from cProject 3.1.
    Report should contain task name, status, start date,end date , effort etc.
    Thanks in advance
    Shiv

    Hi,
    Activate the form DPR_TASK_HIER for a particular Project type in SPRO screen. Now keep the cursor on any task in cProjects & click on Print pushbutton, this will generate a PDF Report which will contain Task name, Constraint dates, actual dates, administration details etc. In order to add more data to the Report, goto transaction SAMRTFORMS & edit the form DPR_TASK_HIER.
    Hope this will help you.
    Regards,
    Sujay G

  • Report Admin - Print Preview Error

    In reports admin, I get the following error when I select print preview:error marshalling arguments; nested exception is; java.net.SocketException; Socket write failed.Any ideas?

    Hi
    Are you using <b>crystal wave</b>  a third party add  or the crystal report add on provided by SAP.
    1.Are all your user facing same issue ?
    2.Did it happen to only item or it is happening to all ?
    So far looks to me ,some fields have been deleted from template. It might be the cause .
    Hard to troubleshoot if it is coming from addon ...
    Well try restoring a default template (if you have ) or some other layout to test the issue.
    Thank you
    Bishal

Maybe you are looking for