Status Selection Profile

Hello,
Is it possible to create a selection profile for DLFL orders in Order Information System ?
I agree marking the deletion flag in COOIS would do, but for the CJI3 report, I want to include DLFL orders as well.

Yes. Please try to create status selection profile(transaction BS42) with selection conditions as
Status = DLFL and state = Active.
Hope it shaould work

Similar Messages

  • How can i check the selection profile

    Hi Friends,
    In BS42 have assigned selection  status profile to status profile and few status are assigned to status profile(CRTD, APRV and REL)
    In BS42 i can assign one type of status profile(say XXX) to more than on type of selection profiles(say AAA;BBB;CCC).
    Now I am creating a appropriation request (AR). Now have approved AR. and if I check in AR-->Control data tab and clicking on display status overview i m getting here asystem and user status overview and after scrolling down I can see the status profile.
    Now in AR how can I check that which type of selection status  profile it is choosing though I am able to see the status profile.
    Any pointers
    Regards
    Ashutosh

    status selection profile is used to restrcit the selection of objects from the database
    if you AR with REL and the status selection profile allows REL then this AR will be se;ected and displayed in the report.
    You cannot see the status selection profile in any tabs on the object as you can see the system ans user status

  • How to use the selection profile and status profile for production order?

    Hi expert,
       I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
      Please help me.
      thanks in advance.
      george.shi

    Hi George,
    There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
    We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
    In this status profile,
    1.We define the sequence in which user statuses can be activated,
    2.We define initial statuses
    3. Allow or prohibit certain business transactions.
    Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
    Regards,
    Raja.
    Edited by: Rajarao on Oct 30, 2008 6:21 AM
    Edited by: Rajarao on Oct 30, 2008 6:22 AM

  • Table for process order &Selection profile status  details -reg

    Hi ,
    From which tabel we can get the link between the process order and selection status profile (like SAP001 etc..
    When we input the process orders we should get the selection status profiel linked to it
    Regards,
    Madhu Kiran

    Hi,
    The tables JEST and JSTO  are related to status profile .
    What i need is of Selection Profile
    You can see this field in COOIS or COOISPI  just above the Sys Status field
    We need this urgently
    Can any one help ?
    Madhu Kiran

  • Very Urgent COOIS Selection Profiles

    Dear All
    I need a urgent help !!!! Please Kindly Help me into this
    My client have a scenario where he wants to extract the Production order's only "REL" status with combination of Work-center
    When we have choose the condition selecting the option of selection profiles and i have taken( SAP001 & SAP0011 )
    And my doubt is when i am using SAP001 i am getting orders "REL" status but only i am able to display some orders one order
    And When i am using SAP011 i am getting two orders and date range is same
    How to achieve this i want to extract orders with "REL" status with combination of Work center
    And i am using sys status CTRD Exclude enable & execute it will display only order release  but its throwing an error in sys status is not unique
    What is SAP001 is Dispatched means what?
    Is there any BUG in the COOIS or need any sap notes
    Please help me i am in great need
    With Regards
    Vasudeva

    Go to BS42 and configure your own Z profile if the standard profile didn't meet your requirement.
    The reason SAP011 is displaying two orders may be because one of the two order is not dispatched.
    SAP011 display orders with operations =REL & ≠LKD.
    SAP001 displays orders with operations = DSPT

  • Selection Profile - what is it and where is it used?

    Hi,
    Kindly help to explain what a selection profile is and where it is used.  (The configration is Project Systems > Structure > Operative Stucture > Milestones > Define Selection profiles.
    I want to understand if we still need to set this up even if we do not use milestones.
    Thanks!
    Regards,
    Vivian

    Dear Vivian,
    if u r not using milestone then u do'nt need to do configure.
    for more detail pls read following
    Define Selection Profiles
    In this menu option you define selection profiles that you can use to specify status combinations for selecting objects (for example, orders or operations). A selection profile is especially useful if you select a large number of objects repeatedly according to the same selection conditions (for example, orders for printing shop papers, for collective release, or for creating order valuations).
    Selection procedure
    The selection conditions are evaluated top-down. Here the following rule applies:
    Several lines following one another that are linked by an OR are combined and evaluated together. From the block at least one selection condition must be fulfilled.
    AND links blocks or individual conditions. All the blocks or individual conditions linked with AND must be fulfilled. An order is no longer part of the evaluation as soon as a block or individual condition is not fulfilled. That means that with every freshly inserted AND a bracket is inserted around the preceding expressions (conjunctive normal form). To select the desired status combinations a reforming of the selection conditions is necessary.
    In general one can say that OR links more strongly than AND!
    Example
    You want to define a selection profile with which orders with the following status combinations are selected:
    REL (released)
    CRTD UND MACM (created and material committed)
    To do this formulate:
    REL OR (CRTD AND MACM)
    But the system interprets:
    (REL OR CRTD) AND MACM
    Orders with the following status combinations are selected:
    REL AND MACM
    Thus the original formulation must be reformulated by "multiplying out" to:
    (REL OR CRTD) AND (REL OR MACM)
    Regards ,
    Vivek Tripathi

  • QM10 selection of notifications-selection profile

    I  need to have users statuses (with and without numbers) as selectable options in QM10 work list.Once notification is created plan is to use QM10 to display work list of different areas of the business. The user statuses assigned to a notification will help track where it is at in the process and will let the users know what work needs to be performed.Please let me know how to sort by users statuses with and without numbers.Can I do it by setting a selection profile?
    The statuses are:
    CAR Corrective action
    ENGR Rework with engineering
    NOAC No Action required
    RGRD Regrade
    RTS Retrurn to supplier
    RTSD Return to supplier damaged
    RTSN Return to supplier noncon
    RWK Rework
    SCAP Scrapped
    SCAR Supplier corrective action
    5 CRET Created
    10 DISP Dispositioned
    15 INCP Inventory transaction compl

    Are you talking about general Selection ID transfer or is this the one that appears in Alert profiles ?
    If it is the one in alert profile, you would need to do similar table level transports using SE16 for application specific profiles table /SAPAPO/SDP_PROF, /SAPAPO/SDP_DB, /SAPAPO/SDP_PRFT and /SAPAPO/SDP_DYN
    If it is general selection ID transport, go to planning area and in the menu bar pickup Transport Connection. You have the option to transport all the selections there. Keep other things unchecked.

  • Process chain for a particular selection profile

    Hi, How can I create a process chain in DP to run only for selected selection profiles?

    Hi Gurucharan
    If you want DP back gorund jobs in the process chain, you will select the DP background processing step under demand planning. However the system will ask you to create a job and an activity so that you can attach the same to the process varaint while adding the step in the process chain.
    While creating the job, you can select the selection profile and the aggregation level at which you want to run the job.
    It is here that you can that you restrict your step to be executed only to your selection profile.
    For creating the selection profile, you can either create the same in //MC77 or use the selection ids that you create the in the DP planning books.
    Let me know if this helps.
    Rgds, Sandeep

  • Selection Profile to Filter by Forwarding Order type in Transportation Cockpit

    Hi All,
    we need to configure Selection Profile / Planning Profile to consider only certain forwarding order type.
    The following settings have been done in the additional attributes of the Selection profile. And this selection profile is assigned to the Planning profile.
    While these 2 profiles are used in the transportation Cockpit, the Freight units are not filtered by the Forwarding order type. Are we missing anything.
    Any help would be appreciated.
    Thanks,
    Michael.

    Hi Michael
    Please give us a feedback! If it is the case mark this thread with a Correct Answer and Helpful Answer where appropriate.
    See http://scn.sap.com/community/support/blog/2013/04/03/how-to-close-a-discussion-and-why  
    Even if you discovered the solution without any outside contributions, it helps others to understand what the solution turned out to be.
    Best regards
    Eduardo Chagas
    [SCN Moderator]

  • How can I add the status and profile picture features on an account that was created before iOS 5?

    How can I add the status and profile picture features on an account that was created before iOS 5?

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • Selection profile sets for capacity planning

    Hi,
    Could you please explain me in details about different sets in selection profiles configuration (work center set, order set, capacity category set, initial set) thorugh OPA2  and how they are related to sets in OPD1 configuration (Object, filter sets).
    Does these sets will effect capacity availability check calculations or they only for different display options for user.
    Please provide if there is any detailed document available since I have a problem where CM01 list is not matching with overall profile used for capacity availability check while creating orders.

    run t-code OPD0 and make adjustment for your overall profile (change a control profile)

  • Removing fulltext option from selected profiles in URM

    I am wondering if there is a way to remove/disable the fulltext search option from selected content profiles? we are wanting to remove it from one specific profile but not the remaining.
    we are running 10gR3 install.

    Assuming you are not trying to fill in the full text box "behind the scenes", it's not that difficult.
    In your selected profile, in the profile's "side effects" section, set the following variable <$SearchEngineName="DATABASE.METADATA"$>
    That will remove the full text box on the search page, and permit only searching of the metadata fields in your metadata model.
    (It could also cause other issues if you are using zone indexing with any of your metadata, so test this solution to make sure it works as expected. The nice thing is that just this one profile will be affected.)

  • Selection profile - no data

    Hi gurus,
    this might be a basic question. Before posting here i have tried to research on my own and after getting no where i have come here to ask the gurus to help me with the issue.APO DP is new to me and i'm learning it as well.
    in the planning book, we have mutliple selection profiles and when i tried to load the data from the selection profile. some selection profiles are blank and they are unable to load the data. what could be the reason? There are some selection profiles which have the data but its not teh full list.
    few inputs - we have a weekly job running in ECP to transfer the materials and plants from ECC To APO. CFM1 and CFM2 tcodes in ECC.
    our BW resource says that he is able to extract the sales orders histroy and open orders from ECC and able to load to APO everyday, which i kinda see in LISTCUBE tcode, but then why is that we are not able to see the data via the selection profile when we are able to see the data in listcube.
    kindly help
    Thanks
    Ravi

    Hello,
    You said "we have multiple selection profiles".
    But you didn't mentioned how exactly the selection profiles has created I mean for which charactorstics/attributes has created the selections.
    For how many selection profiles you are not able to see the data.what are the charactoristics/attributes are there in those selections.
    Have you given any of the Values for those charactorstics/Attributes when you create those selections.
    Can you pls provide that information?
    And also for your understanding pls check the below ways. Hope the below mentioned points will help you why the issue has raised.
    1) Is all selection profiles created in PB for all the selections whether the data is loading from BI to APO BI or not?
    2) Hope you or your BI guy already captured BI Report before facing this issue when your BI guy has loaded the data from BI to APO BI.
    3) Now you are saying that issue has got resolved by reloading master data by your BI Resource and by doing consistency checks. Pls get the bex report download after reloading master data by your BI Resource which keyfigure the data is copying from BI to APO BI. 
    4) Compare both the Reports before master data reloading and after master data reloading and try to check for the selections which the data has missed in PB.
    5) if data has missed only for particular skus, or depots. pls check clearly the attributes in the Selection profiles which data has not loaded prevoulsly and the Bex Report attributes i.e Infocube attributes/charactoristics.
    As you said by reloading the master data by your BI Guy your issue has resolved.
    Hope the above mentioned points will help you to understand completely about the issue.
    if you want indepth clarity on your issue means pls reply me the above questions which I checked.
    Regards,
    Subhan

  • How to bring status selection ID in RE Query ?

    Hello
    I have created a query on RE table and want to bring in the status selection ID in the selection screen. I used table join but do not know how to attach this status selection structure to my join.
    My current stautus of query is that the status selection ID field is available in selection screen but since I have not linked it to my table join, hence, it is not working.
    Please advise
    Still Learning...

    Hi,
    The ADS will not understand this as an icon and create it on the PDF. If you want to insert an icon in the
    PDF you should insert it as an image in the Designer.
    Arun

  • Ability to call selection profiles in planning book using popup box

    Hello does anyone know if it is possible to call a selection profile in a planning book using a popup box?
    i.e. perhaps using a macro ?
    Any help is greatly appreciated.
    Thanks
    Edited by: Ballance Agri-Nutrients on Feb 17, 2009 3:10 AM

    Just wondering what is the business need this pop-up, based on user settings list of selection profiles already filtered and displayed in the planning book. User can select the profile just by clicking the list of selection profiles provided.
    For the web enabled users, they can select data view, and selection profiles before they view the planning book screen. Check with your technical person they should be able to tell you if the same can be used and built a pop-up.
    Hope this helps

Maybe you are looking for