Status Stock M and Stock Category S
I have problems for GR using MB1C and mov 501 because I need to use that with Status Stock M and Stock Category S, Do you know if is possible this kind of combination M and S for GR?
Hi Rose, thanks for your information, let me explain you all the context,
First I need GR for damage materials to the WH but with Special Stock field = M for non valued (without accountant document) and second this material needs the stock category "S" (blocked stock) because this material doesn't need to create a necessity when the MRP runs (due is scrap material).
I hope this information could clarify my question and is enough for you to give me an answer
Thanks in advanced
Diana
Similar Messages
-
Hi,
I made a UD of an Insp Lot to 'Scrap' in the Inspection lot stock tab.
The system automatically created a material document with movement type 553 (Direction -) and 551 (Direction +)
However the stock Category in the material document is "Q". IS THIS CORRECT? SHOULD THIS BE "S" (This is in the WM tab of the material document).
Also when I query MMBE after the above UD to Scrap, the batch quantity is not shown either in Quality or Blocked stock. IS THIS CORRECT?
Please advise.
Regards
PriyankaMy understanding was when I input a quantity in 'Scrap' field during UD
1) The stock should be blocked (hence it will show under blocked stock column in MMBE)
2) The stock category should be "S" and not "Q"
I agree that in MMBE based on your explanation the stock should not be shown in blocked.
But can you explain why the stock category is "Q" instead of "S"
Regards
Priyanka -
2LI_03_BF Material Stock Type and Stock Category Determination
Hi All,
I need your help in determining the stock type and stock category of a certain material.
Is there a way to determine it manually? cause i tried to look at the MSEG table and it does not show anything but when i try to run the material document that contains the movement/material it populates the stock type and stock catertory in the setup tables.
Regards,
AldenHello
1) 2LIS_03_BF clearly gives you the receiving plant and the issuing plant. For eg if you are doing plant to plant transfer there will be 2 entries in 2lis_03_bf , one for issue and one for receiving. You can bifurcate the receiving plant and the issuing plant by using either process key (BWVORG ) or debit credt (SHKZG) (H stands for issue & S stands for receipt).
2) 0MAT_PLANT_ATTR provides you the plantwise specila procurement type
3) you will get VBUK-GBSTK in the standard source 2LIS_11_VASTH . You will have to combine the data at the BW level
Regards
Gajesh -
Re-configure 'Stock Category' in the Warehouse Management system
Hi Gurus,
As we all know, it is possible to see which batch/material is in blocked status because the system highlights it with stock category indicator "<b>S</b>". With this, I would just like to know if it is feasible to modify the configuration in the system so that it assigns the Stock Category (labelled as '<i>C</i>' in transaction LS26) as follows:
<b>S</b> : blocked without a usage decision
<b>R</b> : batches which are blocked because they were rejected (there was actually a usage decision)
Please let me know your thoughts regarding this matter.
Hope you can help me on this one. Thanks in advance.Hello Francis,
I think it is not good idea to change the standard SAP settings becuase we are not sure where our changes will impact. However, the SAP system is behaving in the same way you want, the only thing is you need to do relevent transaction at inventory level and subsequently carry out posting change in Warehouse System.
Quality stock with stock indiacator 'Q'
Blocked stock with Stock indicator 'S'
Return stock with stock indicator 'R'
Hope this helps.
Arif Mansuri
Reward if answer is helpful. -
Cross Docking for stock category Q (inspection stock)
Hello everyone,
My client uses cross docking in 4.7 release and recently a requirement came up where they wanna be able to cross dock stock received from production while the User Decision from QM is still pending.
I have tried to walkthrough the code behind planned/opp cross docking and realised that only available stock is taken into consideration.
I d be really grateful if anyone could suggest how to best approach and tackle this issue? Please consider that the quant should not lose the inspection lot number so that once UD is given, the stock category changes automatically.
Thank you
Kind RegardsYes it is possible. In the IM/WM interface tables, in the second table, you can vary the process according to stock status. See the third column.
LogisticsExecution \ Warehouse Management \ Interfaces \ Inventory Management \ Define Movement Type
Following is the config. help text for the field
Special Stock Indicators for Whse Mgmt
Use
In the Materials Management system you can post different transactions using one movement type. For example, posting goods receipt to unallocated stock or goods receipt to
stock in quality inspection.
These transactions are treated differently by the system on the basis of this indicator. Together with other indicators of a movement type in the Materials Management system, this indicator is used to correctly allocate a movement type in the Warehouse Management system so that the transaction can be posted accordingly.
Regards,
Nick -
Inventory report for stock category B
Hi everyone,
We are trying to generate a customer stock inventory report with stock category B. The table MARD is not displaying any values annwe also looked at table MKOL. Its not giving us any. How do i get the inventory report for this stock type B. Kindly Advise.it is customer owned stock. We receiver materials from customer for repair and we recondition them and we give it back. for this we maintain it in stock type B. it is specifically used in aerospace industries. We want to make an inventory report for this customer owned stock in our inventory . i am unable to get the table. Kindly advise
-
How can I create a new stock category?
Right now we have 4 separate categories....
1 - First
2 - Second
C - Closeouts
S - Samples
Where in SAP can I create a NEW category? (example: "3 - Third")Yes I have, I've created multiple characteristics using the "Chars Group" "AFS characteristics for categories" under the Basic Data section of the Basic Data tab.
Unfortunately, none of them show up under Category Structures or Coverage Strategies in SPRO.
How exactly do I edit the settings of a coverage strategy in SPRO? There does not appear to be any options availbale when a coverage strategy is selected. Is this something that is taken care of under CT04? Or am I not understanding how a coverage strategy works? What is the difference between a Characteristic and a Catagory Structure and how can I edit or change the settings of a catagory structure?
Edited by: Cameron on Dec 3, 2009 9:51 AM
Edited by: Cameron on Dec 3, 2009 10:14 AM -
How to use Stock Category Group for two different configuration.
Hi all,
I want to use the stock category group to do this scenario:
I have two process using the same location, the process A wants to consider Stock cat. Grp. 'ZSW' (SAPAPO/LOC3) so it will consider Stock using CC, CF and CE. The process B wants to consider Stock Cat. Grp. 'ZST' to consider only CC.
My doubt:
How can I do that setup to make different things according the process? I tried to do something in Planning Area (SAPAPO/MSDP_ADMIN) but doesnu2019t work.
Can anyone help me?
Thanks,
-Ralph VeigaHi Ralph Veiga,
Indeed the stock category group is define at location level...
I think your answer involves macros more than PA settings.
First I will suggest to split the stock key figure into 2: one for CC, one for the other.
For the CC, use the standard (cetegory group with CC only on the location master)
Now you need to populate the second key figure with CF and CE.
You should be able to built a macro using function PHYSICAL_STOCK() to get what you want.
For sure yuo first need a way to check if you want or not the CF and CE. Here implement your own logic for exemple base on your product characteristics with either MAT(), MAT_C(), MAT_EXTRA(), MATLOC_C()...
Else you can use a Z function in the macro to collect this data, but it involves ABAP coding.
PS: you don't actually need to split the key figure into to, but I think it helps with visibility...
Regards
Julien -
hi,
i am posting gr.po in migo for x- material as 10 quantity then TR is created automatically with stock category as "Q" after quality inspection once i put TO for that material the stock category as "Q" not as available stock . my requirement is whenever goods came it moved to qc then only it moved to warehouse. how to achive this flow.......because once i put gr the transfer requirement is created with stock category as "Q'. so if i proceed this TO created with Q category.
thanks
muthuraman.Dhi,
as per suggestion first one soution i go for manual TR its working fine but one more issue arises. when i post gr/po in migo the stock get increased in warehouse as stock category as 'q' with +ve quantity and _ve quantity looking for posting change TO and then i put manual TR -TO-confirmation for purchase order stock moved destination bin with stock category as unrestricted stock,but my problem is stock in posting change quantity still there.
my requirment is once i post gr the stock never get updated in wm level. once i put manual tr-to then only it should updated.....other wise two stock are updated one for manual TR and another for migo posting(waiting for posting change in interim area with -ve and +ve quantity values)....how to avoid that....kindly explain..........
Thanks
Muthuraman.D -
Additional Stock Category Considered in SNP Heuristics
Hi,
The customer has a requirement to add 'inspection stock' into the SNP Heusrics planning considerations. The stock is already CIF'ed to APO, and is already seen in RRP3 Product view.. So I think part of the work is done. What further do I need to do to get it added to the key figure in the SNP Planning book?
I have looked at MSDP_ADMIN and the details of the key figure, The stock key figure used here is listed in many planning obj structure, eg 9AMALO, 9ASNPBAS etc. But in all of them there are no category groups or individual category settings assigned... and it is actually greyed out and I cannot add one. So im not sure what it is working on today, even before the new customer requirement.
Is stock as a key figure different than others? I understand category groups and how they are used in ATP Issues / Reciepts for deployment.. but this appears to be a different setup? (as it is blank currently)
Other posts seem to have menitoned something about the SNP tab of the location master data in APO. 'Category Groups for Stocks'.
Do I need to create a new category group in SPRO customising, and then add it to this location master data? or the key figure? or both? or none?
Please help.
S SBAnswering my own question now I have found the answer for the benefit of others:
When a specific stock category group is assigned in the location master then the sytem considers all the stock categories assigned to that category group while calculating the initial stock.
If no stock category group is assigned in location master then the system looks at the category group "ST1 - Opening stock" in SPRO and considers all categories in cat group ST1 while calculating the initial stock.
So to include CF / CI / any other cateogy in the initial stock calculation , all you have to do is assign those categories to ST1 category group . Once this is done you will be able to see the difference in your initial stock.
There is NOTHING required in MSDP_ADMIN. Tested and confirmed. -
Batch / Stock Category Issue
Dear All,
I have a scenario where a single material in a purchase order has different stock categories as below:
PO/LI - 10 Mat A US
20 Mat A FR
30 Mat A AG
When the GRN is done, ideally for the different stock categories the created system batch should be different, but in my system a single batch gets created for all the stock categories. As per my understanding the relationship between Batch & Stock Category is ONE to ONE. But how could it is be possible that the system replicates the same batch for the different stock categories for a given GRN instance ( in a single material document)
In the material master, the discrete batch is maintained and also the batch management tick is maintained.
Any reasons as to why this is happenning and how i could rectify this
Regards
Shabeen BuharyWhat "stock category" means? "US", "FR", "AG"?
Are you speaking about valuation types?
How batch number ssignment is set in the system? Please check it - maybe user exit SAPLV01Z is used --> revise the logic of it with the help of an ABAPer.
In your example I can see separate line items - you should be able to set the system to assign different batch numbers to the items (via user exit).
Regards,
Csaba -
Hi
In Decentralized Warehouse management system, can we use VLMOVE transaction to change stock categories from U/R to Quality or from Quality to Blocked and so on.
If yes, how will the stock category changes replicated in the inventory management in central erp.
If no, how should we do stock category changes in de-centralized WM without actual material movements.
Thanks & Regards,
NadeemHi
Thank you for your reply.
I know about this process to initiate stock transfers in central ERP to do stock category changes via deliveries.
But what I want to know is whether I can use VLmove in the de-centralizred system to change the stock category.
Or is there any way that I initiate stock categoryu change in the de-centralized system and then the respective posting is done in central ERP.
Thanks & Regards,
DMNadeem. -
Hi gurus,
How can I change the stock category from available to block(S) for a material (WM managed) without changing the storage type, bin number?
Regards
Rajib PathakHi,
You should trigger this transfer posting in MM (MB1B or MIGO). The move is seen as a virtual move in WM so the stock should stay in the source bin. A posting change notice should be generated from the IM movement and in turn, the TO can be created for the PCN. Here two line items should be generated. The first item posts from it's current position to 922 (normally bin TR-ZONE) and the second line item posts from this 922 location back to the original bin. The second line item will also hold the change of stock category. If this is not happening, please check the movement type in WM config. It should have the source and destination defined as 922 TR-ZONE (for example) and it should have a shipment type of 'U' for posting change.
Hope this helps. Regards,
Sinéad Curran -
How to find stock category for a particular material in inventory in r/3
Hi All,
I have found there is no update of some material category from r/3 to bw. when data is loading from ods to cube there is a routine for valued stock i.e., eg: stock category is 'U' then only update to cube other wise no update.. some stock category is missing in ods so those data is not updating to cube so data is not matching from r/3 and bw.. could you any body please let me know where we can check stock category in r/3....
just i want to check the postings in r/3 side for stock category which ever is not update to cube..
I have tried in MB51, MB52, MB5B.. i couldnt find category for a material... if any body knows it please let me know..
Thanks & Regards
Sreekanth
Edited by: sreekanthbulle on Sep 2, 2011 9:39 AMHi
Are you investigating Inventory as well..Can you pls share your design and how reconcile to match the data with SAP?
Also how do I refresh data again from begining to do FULL REPAIR? pls help -
2LIS_03_UM Datasource Material belonging to Stock Category 'E' Issue.
Hi,
We wanted to use 2LIS_03_UM Datasource for Sales order Stock Valuation as we want these valuations in Daily level at sales order item level . But we are having a problem in Extracting Materials with Stock Category(BSTTYP) 'E'. I have selected fileds LBWE MBLNR, KDAUF, KDPOS from LBWE pool and brought them to the Extractor . After filling the setup table in OLIZBW with the Company code and posting date. In RSA 3 i am getting data for the company code and posting date. But the Fields BSTAUS and BSTTYP with values 'V" or null. I just came across in one of the forums we have to do some config in
include LMCB1F20 (routine STA_VERAENDERUNG).
And joins on tables MSEG, T156C, T156M
cosidering fields ->
BUSTM, ZUSTD, CNT02, LBBSA, SOBKZ
Can i have some more details on how to do this in R/3.
ThanksHi Arun,
Valuated Stock with unrestricted use is a Non - Cumulative key figure and you dont have to add this field to this data source or for that matter to any data source. You can simply include this info object directly in the Inventory Cube and write the Update routine accordingly.
Before writing the routine you must ask your finctional guys to provide you with the classification of the material movements. I mean are there any Z Movements for this key figure? What are the process keys for this? etc...
This will help you in writing the routine for this key figure.
Hope it helps...
Maybe you are looking for
-
Device manager does not show any signs of failed hardware Server used to be the only domain controller in the network We had a power failure that resulted in the machine powering off incorrectly (3 months ago or so) Windows would not start for a mis
-
How do I buy stuff on the iTunes Store if I can't remember my security information
How do I buy stuff on the iTunes Store if I can't remember my security information
-
Modify the title of a wad report at run time.
Hello Gurus, i have a query in a report which lists the products.On clicking on a product, it takes me to anthr template which has the details of that product.The current scene is that whenever the user selects a product its detail report opens in a
-
i want a free iphone can you guys help me!!!!
-
30,60,90 Days Totals in sql query
Hi All, Here I have written a query to find the total for 30Days to calculate costs.... These 30Days Amount will be populated into another table based on joins. I know we can do by case in the final update but lot of logic is going into temptables1