Status stuck in "invisible"

Why is it when I touch my profile pic in the top right corner the status does not pop up I am stuck at invisible this is so frustrating

No clue what it said before , sorry. I use a belkin pci card in the desk top w/ dLink 624 wireless router.
I don't do computer to computer stuff. My old hard drive died recently. But I replaced it and had my desktop up and running on the network for a couple days, so I don't think that matters.
I'm so confused.

Similar Messages

Content Status Stuck "In Progress"

I had this error before, and installing the hotfix http://support.microsoft.com/kb/2828900/en-us fixed the issue. However, last week the issue returned. At the time, nothing
had changed. I have since installed CU4, then CU5. These servers are updated monthly, but had not yet updated when this began.
When viewing the Content Status, the Status is “Waiting for Content.” However, in the Asset Message Summary, the description is “Distribution Manager successfully processed package…”
OSD task sequences are now not able to complete due to the Configuration Manager Client Package being in the same state (due to the CU5 client update).
Deployments such as Programs and Updates are completing successfully.
Interestingly, I was able to distribute NEW content (SP1 CU5 - x64 client update) to a Distribution Point Group (which includes 4 of 13 DP’s). So maybe this issues only applies
to REDISTRIBUTING content.
PkgXferMgr.log does not show anything unusual
Distmgr.log shows a recurring attempt to update a package which was removed and subsequently redistributed for testing purposes, but other entries appear to process normally.
Found package properties updated notification for package 'KS100005'
Sleep 30 minutes...
Found notification for package 'KS100005'
Package 'KS100005' (priority 1) is already in queue.
Used 1 out of 7 allowed processing threads.
Package 'KS100005' is found in active queue, will try it later
Sleep 1753 seconds...
Sleep 30 minutes...
My configuration:
Windows Server 2008 R2 SP1
SCCM 2012 SP1 CU5
SQL Server 2008 R2 SP1
1 Primary Site and 12 Distribution Points
Original Install Date: 4/13/2012
I have Googled the following and read most results on the first two pages:
In progress - Waiting for Content
Package (priority 1) is already in queue
Package is found in active queue, will try it later
distribution manager successfully processed package waiting for content
The content status of a package is stuck in "In progress - Waiting for Content" status in System Center 2012 Configuration Manager SP1
Maybe someone has some fancy PowerShell or SQL commands I can run. (My SQL skills are limited).
Jamie

Thanks Torsten. I've read many of your successful replies over the years, and now you're answering one of my questions! Actually, the first question since I've usually found the answer.
Yes, I have redistributed the packages that are giving the inaccurate status messages.
To get a current log, I redistributed the configmgr client (KS100002). The description now reads "Distribution Manager created snapshot for content Configuration Manager Client Package successfully." However, the Content Status is still "Waiting for
Content - In Progress."
distmgr.log
Taking package snapshot for package KS100002 from source \\svsccm1.nazdar.com\SMS_KS1\Client
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:53:50 PM
1184 (0x04A0)
Set share security on share \\svsccm1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:53:50 PM
1184 (0x04A0)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER
7/24/2014 1:53:54 PM 6492 (0x195C)
Found package properties updated notification for package 'KS100005'
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:00 PM
3520 (0x0DC0)
Found notification for package 'KS100005' SMS_DISTRIBUTION_MANAGER
7/24/2014 1:54:05 PM 3520 (0x0DC0)
Package 'KS100005' (priority 1) is already in queue.
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:05 PM
3520 (0x0DC0)
Used 2 out of 7 allowed processing threads.
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:05 PM
3520 (0x0DC0)
Package 'KS100005' is found in active queue, will try it later
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:05 PM
3520 (0x0DC0)
Sleep 3600 seconds... SMS_DISTRIBUTION_MANAGER
7/24/2014 1:54:05 PM 3520 (0x0DC0)
The size of package KS100002, version 11 is 187015 KBytes
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:06 PM
1184 (0x04A0)
CreatePackageSignature() called for Package KS100002 with version 11 with source as '\\?\UNC\svsccm1.nazdar.com\SMS_KS1\Client'. KeepUnpackedSignature = 1
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:06 PM
1184 (0x04A0)
Successfully created RDC signatures for package KS100002 version 11
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:10 PM
1184 (0x04A0)
Set share security on share \\svsccm1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:10 PM
1184 (0x04A0)
Creating hash for algorithm 32780 SMS_DISTRIBUTION_MANAGER
7/24/2014 1:54:14 PM 1184 (0x04A0)
The hash for algorithm 32780 is EF26808AB6F9B0291F4E0999BB09F90DA9AAEF3C334BF681A0D8CAAC226C5A39
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
The RDC signature hash for algorithm 32780 is 9DF7DE9375172B8E07724E5985B5D2142839AC135D7ABE6F246203E89FA6AD00
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
STATMSG: ID=2376 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=svsccm1.nazdar.com SITE=KS1 PID=7472 TID=1184 GMTDATE=Thu Jul 24 18:54:14.344 2014 ISTR0="KS100002" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8=""
ISTR9="" NUMATTRS=1 AID0=400 AVAL0="KS100002"
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=KS100002, Version=11, Status=2376
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
The source for package KS100002 has changed or the package source needs to be refreshed
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
Adding these contents to the package KS100002 version 11.
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
The Package Action is 1, the Update Mask is 32 and UpdateMaskEx is 0.
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
Use drive C for storing the compressed package.
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
Set share security on share \\svsccm1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
Successfully created/updated the package KS100002
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:19 PM
1184 (0x04A0)
STATMSG: ID=2311 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=svsccm1.nazdar.com SITE=KS1 PID=7472 TID=1184 GMTDATE=Thu Jul 24 18:54:19.703 2014 ISTR0="KS100002" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8=""
ISTR9="" NUMATTRS=1 AID0=400 AVAL0="KS100002"
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:19 PM
1184 (0x04A0)
Set share security on share \\svsccm1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:19 PM
1184 (0x04A0)
Set share security on share \\SVWSTSCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:21 PM
1184 (0x04A0)
Set share security on share \\SVTEISCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:25 PM
1184 (0x04A0)
Set share security on share \\svsccm1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:27 PM
1184 (0x04A0)
Set share security on share \\SVPENSCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:28 PM
1184 (0x04A0)
Set share security on share \\SVMICSCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:34 PM
1184 (0x04A0)
Set share security on share \\SVMIASCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:36 PM
1184 (0x04A0)
Set share security on share \\SVMEXSCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:41 PM
1184 (0x04A0)
Set share security on share \\svmansccm1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:50 PM
1184 (0x04A0)
Set share security on share \\SVGSISCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:57 PM
1184 (0x04A0)
Set share security on share \\SVGRNSCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:59 PM
1184 (0x04A0)
Set share security on share \\SVCINSCCM.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:55:03 PM
1184 (0x04A0)
Set share security on share \\SVCHISCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:55:06 PM
1184 (0x04A0)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER
7/24/2014 2:23:59 PM 6492 (0x195C)
pkgxfermgr.log- no activity

FTPs - Status stuck in "Processing started"

I am running PI7.0 SP10.
I have a BPM conencting to a FTPs server to process multiple files into variable directories. All works well - apart from...
It is connecting to the Server okay, but not actually processing.
In the Message monitoring, it says - Processing started
Here is the audit log... The names have been changed to protect the innocent!
Success Message successfully received by messaging system. Profile: XI URL: http://server.fqdn:5<SYSNO>00/MessagingSystem/receive/AFW/XI Credential (User): XIISUSER
Success Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
Success Message successfully put into the queue.
Success The message was successfully retrieved from the receive queue.
Success The message status set to DLNG.
Success Delivering to channel: FTP_Receiver_EmployeeLookUp
Success MP: entering
Success MP: processing local module localejbs/CallSapAdapter
Success File adapter receiver: processing started; QoS required: ExactlyOnce
Success File adapter receiver channel FTP_Receiver_EmployeeLookUp: start processing: party " ", service "XE_TST_3RD_FTP_001"
Success Connect to FTP server "ftp.ftp.ftp.ftp", directory "/variable/"
This is stuck in processing...
I have spoken to the "owners" of the ftp site...
In the their logs, they can see the connection, and "session started".
Has anyone come across this before? How can this be fixed/released and actually process?

Barry:
I was watching your thread from the day you posted since we had the same issue
Even we have the same issue for the past month..we tried all sort of solutions to get rid of the problem but were not able to....its still exist..we have logged a ticket to SAP support and waiting for them
for the time being we used "Availability Time Planning" to schedule the polling which is like forcing the channel to wake up and die in the time interval we want....
(sometimes even it stops but not as frequent as the above)
if you find permanent solution to your problem let me know

Agent Status Stuck in EIM/CIM - "reserved"

Good morning.
We currently have one agent stuck in a "reserved" status, with no emails populating. We cannot get the status to clear.
Is there any suggestions on how to clear a stuck status?
Thank you,
CIM version 4.3.1

I would use your lab system and try the registry setting RouteRequestTimeout (default is 30000 so probably msecs).
\ICM\\PGn[A,B]\PG\CurrentVersion\PIMS\pimN\EAGENT\Data\Config
I don't know if this is correct, of course. But it looks tantalizing
Regards,
Geoff

Material Replication from R/3 to SRM - Object status stuck in Running mode

Hi Experts, I am new to this Forum and I am facing the following issue,
System Info :
SRM 5.0
ECC 6.0
I am trying to replicate two materials from the backend R/3 system and have set material filters on the SRM side.
The filters are Table: MARA, Field: MATNR, OP= Equality(=low), LOW = T-SRM13, inclusive defined.
The filters are Table: MARA, Field: MATNR, OP= Equality(=low), LOW = T-SRM113, inclusive defined.
This is my sequence of operations in SRM:
I deleted exisiting queues, started initial load and then activated the inbound Queues for my client.
Then when checking, Monitor Load objects in SRM, the status for Material is stuck in Running mode with an yellow sign.
Please let me know if you have any advice.

Hello,
First of all, check RFC queues in transatcion SMQ1 and SMQ2 for any detailed information.
Make sure if Your RFC user has SAP_ALL authorisation - if not add it and delete all material queues and run again.
Make shure if You run report BBP_PRODUCT_SETTINGS_MW with proper option and unchecked "Test mode". Once you have done this rerun your initial load for DNL_CUST_PROD0, DNL_CUST_PROD1, BASIS3 and MATERIAL.
Regards,
Marcin Gajewski
Please reward points for helpful answers.

SC status stuck in I1111 Item in Transfer Process

Hi Friends
We're using SRM 7.0 SP03.
I got a question about SC status update, let me describe it with an example:
1) firstly, i found a SC became Error in Process due to some data problem;
2) then, i reprocessed it in Application Monitor by click the button of "Create Follow-on documents";
3) when checking it in BBP_PD, i found this SC item status became I1111 Item in Transfer Process, and looks like it stuck in this status for a long time(more than 5 or 6 hours);
4) the second day, i found it turned to status I1112;
Here comes my question, what activity updated this SC's status from I1111 to I1112?
I tried program CLEAN_REQREQ_UP and BBP_GET_STATUS_2, i believe this change was not updated by this two programs, and I checked almost all batch jobs running in my system, nothing found.
It has been bothering me in the past month, what's the mechanism of this status update?
Could anyone give me a clue, i'll highly appreciate, thanks.

Hi Nikhil
I read this notes before, program BBP_ALERT_SB_NOTTRANSFERED only include SC after a certain time. My error SC is an old one, created several weeks ago, I checked the time stamp in table BBP_CONTROL, I think this SC is not include in BBP_ALERT_SB_NOTTRANSFERED run.
Btw, about program BBP_ALERT_SB_NOTTRANSFERED, there's a default parameter:
"Add. Time for CLEAN_REQREQ_UP 7,200"
What's this used for?

Software Update status stuck in Unknown Client check passed/Active

I've been rooting around in this for a week now so I'm looking for some other ideas.
A couple of weeks back I tried publishing some updates from SCUP into SCCM. Shortly thereafter I started seeing all my client getting stuck in Unknown "Client check passed/Active" status for Software Updates, starting with my most recent Software
Update Groups and progressively creeping its way back into older ones.
Clients' WUAHandler.log show errors with <![LOG[OnSearchComplete - Failed to end search job. Error = 0x8024000f.]LOG]!><time="18:16:20.329+240" date="08-14-2014" component="WUAHandler" context="" type="3"
thread="2496" file="cwuahandler.cpp:3064">
Client WindowsUpdate.log shows the same error code: 2014-08-15 11:37:16:278 520 1b7c Agent WARNING: WU client failed Searching for update with error 0x8024000f.
I also have one of my older deployments starting to pick up a status of Error, code 0X8024000F "Circular update relationships were detected in the metadata."
I found some folks with similar issues where they were advised to remove the offending updates from their packages. I never got the SCUP updates into any packages; they were showing up as Metadata Only and I started troubleshooting this issue instead. At this
point I have removed everything from SCUP showing in SCCM console just to make sure. (I think I expired them all in SCUP and then synced with it again.)
I have tried several client-side fixes that have not resolved the issue (KB971058, rebuild the SoftwareDistribution folder, KB947821).
I have even uninstalled the WSUS role off my server, restarted, then reinstalled. SCCMw ill sync happily with WSUS and received this week's updates successfully but it cannot pull a status for these new updates and all the existing ones still sit in Unknown
status in their deployments. I tried creating a new small deployment and it still gets stuck in the same place.
It looks like my Software Updates metadata in SCCM is a mess and I'm not sure how to resolve it. I think the next step I can think of is to strip the SUP role off the server and pop it back in after its had some time to clean itself up. Does anybody have
any other less severe suggestions?

Hi,
There is someone remove all the third-party metadata in WSUS Database, then run full sync and initiated scan cycle on the machine. The client successfully scanned updates.
But editing database directly is unsupported by Microsoft.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Fusion Absence Status stuck 'In Progress'

Hi !
I'm trying to complete a full cycle of recording an absence.
I've created the accrual plan, the absence type and enrolled employees in accrual plan.
At employee level I added an absence ( of the type created before ) and is stuck in status 'In progress'.
In the Absence Type, section 'Display features' I selected the options as below.
My questions:
1. Where and how these Display Features can be used ? for 'Approval Processing' Employee level 'Enabled' does it mean that the Employee can select the Approver ?
2. What is the maening of 'In progress' status ?
regards,
Gabriela

Hi !
I'm trying to complete a full cycle of recording an absence.
I've created the accrual plan, the absence type and enrolled employees in accrual plan.
At employee level I added an absence ( of the type created before ) and is stuck in status 'In progress'.
In the Absence Type, section 'Display features' I selected the options as below.
My questions:
1. Where and how these Display Features can be used ? for 'Approval Processing' Employee level 'Enabled' does it mean that the Employee can select the Approver ?
2. What is the maening of 'In progress' status ?
regards,
Gabriela

Status stuck on away, doesn't change

Hello,
For some days now. (After I have logged in to my skype account from my home, I usually use it at work), my account is constatly stuck on away. Actually other users see me as away. I can change statuses but there is no actual effect. Other users always see me as away. I have tried unistalling/reinstalling. I tried logging in to another pc. It's a problem with the account. This problem doesn't also let me be part in groupcharts.
I would appreciate some help
Thanx in advance,
Vagelis

ranb wrote:
Hello Skypers!
My status is stuck on away, I have tried all the threads I found here and on other places...nothing works!
The Status is alwyas away from all of my devices, two desktops and the Mobile
/showplaces command returns Connection OFFLINE
/remotelogout command returns nothing...
I have also tried to delete cache, uninstall & Install...
Please help...
Thanks much,
-Ran
If you send the /showplaces chat command on a device which is Offline, then you will receive:
MSNP: Connection OFFLINE
You should be logged in to Skype on your Windows computer and then try the /showplaces chat command.
If you will see that you have several end points, then send the /remotelogout chat command. This command should disconnect Skype on all other devices except the current.
The /remotelogout command does not return any message, but you can again try the /showplaces command to see if the other devices are now disconnected.

Where is the status setting for invisible

Where on the menu is the control to change status, i.e. on-line, invisible. i don't want people to know when I'm on the internet.

daveteauk2 wrote:
Where is the privacy setting for the trial version of cs6 photoshop. I would like to turn it off. The answers given by 'Staff' are incorrect - it is NOT locared within Help/Adobe Product Improvement Program! I use W7 64bit.
You are correct.
The privacy settings will be those of the "trial experience" and that has nothing to do with the APIP.
Maybe this image will help:

Battery status stuck at 99%

So i have had my aluminum macbook for about 2 weeks or so and it has been plugged in for about the entire time(desktop replacement) and now i have noticed that the battery status has be stuck at 99%. Any tips?

Hi Joshua Conecoff: That is perfectly normal behaviour. Check out this Apple article for more details. http://support.apple.com/kb/TS1909
Enjoy
Stedman

Adobe Media Encoder project status stuck on ready - won't encode

I've tried about a million things. Re-installation of Encoder, Premiere and Quicktime, clearing and relocating media cache, changing file export type... Nothing. When I click the green start button, nothing happens. Nothing starts to encode. My files are just stuck on ready. Help plz.
Oh... and I've got a deadline on Feb 1st to top it all off! Please help!

Could you check a folder or file called "Presets" under a user Documents > Adobe > Adobe Media Encoder > 8.0? If this is somehow corrupted, please try deleting this and relaunch AME.

Charging Status Stuck On MacBook Pro

So I had my MacBook Pro charging, and it said it was on 59%. For some reason, it had been stuck at 59% for a while. I highlighted the power readout in the menu bar, and it said 20:00 until full. I unplugged the charging cable and plugged it back in, then it read 89% full and charging.
Is this a problem with the OS or the battery?

Resetting SMC may help.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

FTP Sender - Status stuck in "Processing Started"

Friends,
I have a Communication Channel Type "FTP Sender" which ends up crashing intermittently during the implementation of reading / conversion of data. The message reaches the status "Processing Started" and not out of it without displaying any error log.
When I go in the Integration Directory and the Active CC, he returned to work.
Has anyone been there who can help me?
Thanks.
Bruno

The timeout I mentioned was the message life timeout not the processing time ,,, Instead of refreshing the channel if you know the message life timeout the message would end automatically instead of infinite loop.
Can you implement the lock parameter in advance adapter attributed clusterSyncMode to "Lock"
Refer to Note 801926.
Useful links to troubleshoot File Adapter
http://www.sappi.sapag.co.in/uncategorized/note-821267-faq-xi-3-0-pi-7-0-pi-7-1-file-adapter/
http://wiki.sdn.sap.com/wiki/display/XI/TroubleshootingtheFile+Adapter

Status stuck in computer to computer

My biege G3 runs 10.2.8 at 400 mhz .
My airport status bar shows computer to compter - so I can't join my wireless network.
I can't figure out how or what I did to change it. Much less how to put it back. The iBook shows "Staus: not available" but works, desktop says "Status: Computer to Computer"?
My iBook 10.2.8 accesses just fine as this post shows.
Please help.
Beige G3 tower 400 mhz Mac OS X (10.2.x)
Beige G3 tower 400 mhz Mac OS X (10.2.x)

No clue what it said before , sorry. I use a belkin pci card in the desk top w/ dLink 624 wireless router.
I don't do computer to computer stuff. My old hard drive died recently. But I replaced it and had my desktop up and running on the network for a couple days, so I don't think that matters.
I'm so confused.

Status stuck in "invisible"

Similar Messages

Maybe you are looking for