Status stuck on away, doesn't change

Hello,
For some days now. (After I have logged in to my skype account from my home, I usually use it at work), my account is constatly stuck on away. Actually other users see me as away. I can change statuses but there is no actual effect. Other users always see me as away. I have tried unistalling/reinstalling. I tried logging in to another pc. It's a problem with the account. This problem doesn't also let me be part in groupcharts.
I would appreciate some help
Thanx in advance,
Vagelis

ranb wrote:
Hello Skypers!
My status is stuck on away, I have tried all the threads I found here and on other places...nothing works!
The Status is alwyas away from all of my devices, two desktops and the Mobile
/showplaces command returns Connection OFFLINE
/remotelogout command returns nothing...
I have also tried to delete cache, uninstall & Install...
Please help...
Thanks much,
-Ran
If you send the /showplaces chat command on a device which is Offline, then you will receive:
MSNP: Connection OFFLINE
You should be logged in to Skype on your Windows computer and then try the /showplaces chat command.
If you will see that you have several end points, then send the /remotelogout chat command. This command should disconnect Skype on all other devices except the current.
The /remotelogout command does not return any message, but you can again try the /showplaces command to see if the other devices are now disconnected.

Similar Messages

Billing Block status in Sales Order doesn`t change with change in Item Cat

Hi Experts,
I have a peculiar problem once I am creating a Contract. In the contract I enter a material with default item category (with Milestone Billing Plan & Billing Block assigned to it),but once I change this Item Category to the other item Category (having No Billing Plan & No Billing Block assigned to it), then the Original Billing Block in the contract for this material does not disappear(the vice-versa of this scenario is not there).
Request for your help on this issue.
Thanks,
Vivek

HI
Check controls of document in VOV8 any billing block is assigned for the document.
Regards
santosh.A.R

CUPC 8.0.3 busy status doesn't change to offline on OS (windows) shutdown

Hi,
We found the following problem with CUPC8.0.3.
When you set the status to 'busy' or 'do not disturb' and you shut down or restart windows (without closing the CUPC program manually) the status doesn't change to offline (from the perspective of other CUPC users or the CUPS end user information page)
If the status is availabe it is going to offline when windows is shut down or restarted
Does anyone know if this is a defect...?
Thanks
rgs
Luk

Hi Luc,
Yes I managed to reproduce it in my lab as well. As soon as you login (after a shutdown) the user is shown busy again.
This is working as expected and it is a known behaviour. It is tracked by the following defect
CSCsl11256
The thing is that a fix would require a lot of changes in CUPC architecture and there is no known date where this issue will be tackled.
This does not happen when the user is already in available status because the busy and 'do not disturb' require special handling
I hope this clarifies things a bit.
Regards,
Christos

My iPhone 4s is stuck in AirPlay screen. It won't shut off, software is current, it rings but the screen doesn't change so I can't take any calls. What do I do?

My iPhone 4s is stuck in AirPlay screen. It won't shut off, software is current, it rings but the screen doesn't change so I can't take any calls. What do I do?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
If you have problems restoring (if that is necessary) the iPhone
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPhone fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Why the time of the online redo logs doesn't change?

Oracle 11.1.0.7 on windows 2008.I find the time of the online redo logs doesn't change since Jan 18 when I had restarted database,and the time of some datafiles doesn't change either.the database is always online and changes are wrriting to the files, I don't know how this happened?
would anyone help me? thank you.

ROCK wrote:
I found some datafiles have the latest date,but the other not. They all have write/read operations on them.
and the switching of the redo logs doesn't change the timestamps of the logfiles since Jan.18 when I had restarted the database. this situation does not appear on the early 8.1.7 database on windows 2000
Does this situation normal?Hi,
Why dont you post the output of the query you are using such as
select group#, first_time, status from v$log;
select name, last_time, status from v$datafile;
select name, CHECKPOINT_TIME, status from v$datafile_header;Time stamp wont change for offline and may be for temp tablespace.
Regards
Anurag

My macbook pro won't start up. I get the white screen and the grey apple icon   the spinning wheel......and it doesn't change !

My macbook pro won't start up. I get the white screen and the grey apple icon   the spinning wheel......and it doesn't change !

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My weather doesn't changes according to time

My weather doesn't changes according to time as after 12:00 am it will remain the same day

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
Also, the US daylight saving time starts tonight. Sometimes the iOS has problems around DST

The html container doesn't change size according to the width of the website, but instead the width of the window.

As stated. The html container doesn't change to match the content on the website (like Internet Explorer does), it changes to match the screen size. That way, when you scroll horizontally, elements disappear because the html container is the size of the screen and in a fixed position.
Example (my problem): http://www.elitepvpers.com/forum/web-development/1847846-question-css-html-width-problem.html
Happens with most websites such as...
http://google.com/
http://co.91.com/index/
http://www.w3schools.com/
http://stackoverflow.com

locked by moderator as dulicate

Some of the album artwork on my iPod is wrong. I've tried to change it many times but it doesn't change. I've decided that the easiest thing to do now would be to NOT display album artwork on my iPod. How do I set my iPod to NOT display album art?

Some of the album artwork on my iPod is wrong. I've tried to change it many times but it doesn't change. I've decided that the easiest thing to do now would be to NOT display album artwork on my iPod. How do I set my iPod to NOT display album art? I've checked the User manual and that doesn't help.

Why don't you, instead of taking time to do that, just backup, and then restore your iPod?
Just a suggestion..

Set Busy cursor doesn't change until mouse is moved

Hello,
When I use the "Set Busy.vi" to control mouse cursor appearance, it doesn't actually change until the pointer is moved. Similarly, the "Unset Busy.vi" doesn't change appearance until the mouse is moved. Is there a way to fix this?
Thanks,
-Dave

Hi Dave,
I've tried this and it seems to work okay for me... do you have any example code you can post? Which version of LabView are you using?
Charlie Rodway
Test Design Engineer
Rolls-Royce Controls and Data Services Ltd

The status of "QUERY_VIEW_DATA_PROVIDER" "DP_1" may only change during comm

Hi,
I am facing the below mentioned error while executing a report on the web with a Variable :-
The status of "QUERY_VIEW_DATA_PROVIDER" "DP_1" may only change during command processing
(The report was run on web with a recently configured portal)
Code for Variable Exit :-
    WHEN 'ZZVAR_YS'. "Yesterday
      CASE P_STEP.
        WHEN 1.
          "Pre Processing
          clear l_s_range.
          clear lv_date.
          lv_date = sy-datum - 1.
          l_s_range-opt = 'EQ'.
          l_s_range-sign = 'I'.
          l_s_range-low = lv_date.
          append l_s_range to p_t_range.
        WHEN 2.
          "No After Processing
      ENDCASE.
Variable Characteristics at reporting End :
1.     Optional
2.     Not ready for Input
3.     Single value
4.                  Customer exit Variable
Pointers will be of immense help.
Thanks & Regards,
Rahul

Thanks,
That was some useful information.
Solved using dynamic assignment of Data provider.
Regards,
Rahul R Nair

My ipod touch (generation 4) is not recognized by itunes. I've each time to reinstall itunes, it works few days and suddenly not without reason-only was is reinstallation-reset of ipod doesn't change something.does someone can help me please?

my ipod touch (generation 4) is not recognized by itunes. I've each time to reinstall itunes, it works few days and suddenly not without reason-only was is reinstallation-reset of ipod doesn't change something.does someone can help me please?

Wow the customer service is even worse. Does Apple want me to go around jailbreaking my iPod now so I can use something that actually recognizes my product?

Changing resolution and image size doesn't change result on screen?

I'm using Photoshop CS3. I am trying to change the resolution of several images that will be printed in a newspaper. So the current images are 72 ppi and really huge -- for example 36 x 27 inches (document size), and when I change them to 300 ppi, the image sizes shrink to about 8 x 6 inches, as I expect. But the image I see on the screen doesn't change. So, for example, when I open up the image originally, it's at 33% and the entire image is visible. After I change the resolution, and the image size has changed accordingly, the image still appears the same and it remains at 33%. Shouldn't the image shrink on the screen since its size has shrunk? Or if it remains the same on the screen, shouldn't the percentage shift? I mean if the document size is now 8 x 6, it should be able to be displayed at 100% and not fill my whole screen... I'm so confused. Thanks...

gradded,
The "Document Size" area of the Image Size dialog is just to indicate the size (in inches) that your document will be printed. The ppi adjustment has nothing to do with what is displayed on your monitor. Your monitor doesn't care anything about ppi. The monitor contains a certain number of pixels and after you change that ppi setting, the monitor will still have that same number of pixels.
As long as you leave the "Resample Image" box unchecked, your image size (Pixel Dimensions) will not change. You will see no change on your monitor. If you check the "Resample Image" box, then your image size (in pixels) will change.
Hope this helps.

Document in status not posted' trip cannot be changed"

Dear Gurus,
I have a situation here that, iam unable to change the expenses, iam getting the following message.
"document in status not posted' trip cannot be changed"
The Posting run was created for this trip, which was accidentally deleted, from PRRW.
Now we wanted to change the expenses from PR05, but we are getting this message.
How to go about this situation.
Thanks in advance

Hi,
Please use the report RPRDETEC to check the inconsistency. You can either delete this trips in the cluster table or manually repair it by writing your own z report.
Regards,
Raynard

BAPI_DOCUMENT_CHECKIN2-Status does not allow you to change certain data

Hi Gurus,
I am uploading the DIR attached files for the Documents in PLM. We have a custom program written to upload the attached files. When I tried to upload the file I am getting the BAPI Return error as "Status does not allow you to change certain data". The status of all the documents is "RL"
File format is
Doc type Document No Rev File Name
JPS 0021581PS, X, /in/PLM/JAPAN/Files/0021581PS.xls
Please help me I need to upload the data.
Thanks,
Deepthi

Check the status network for your doc type in config. You may find that the current status may not allow you to make changes. You may need to change the current status to another status before you can make the changes you would like.
The config settings will tell you the status you may set in order to make your changes, if they are allowed.

Status stuck on away, doesn't change

Similar Messages

Maybe you are looking for