Status Text 000

Hello
I tried an Idoc. It doesn't reach XI. It does not appear in SXMB_MONI. In SM58, I see status text 000. What does that mean ?
However when I go to WEO2 I see Current Status as 03.
What should I do and how woiuld I proceed ?
Midhun

Hello Ravi
When I double click on it, I get this : : 000
I don't find anything more
I went to SM59, RFC Destination from QAS of XI, then did a Utilities -> Test -> Authorization Test
I got this as a result.
Logon Cancel
Error Details Name or Password is incorrect (repeat logon)
So there is an Error with SM 59 that I created to ECC from XI.
Midhun

Similar Messages

  • IDOC Posting To XI Failed With Status Text "::000" in SM58

    Hello Gurus
    Can u please suggest me how to overcome the problem with Custom Idocs while trying to send from SAP R/3 to SAP PI(XI).
    The status text is displaying as "::000" with no other details, in SM58 of the sender system i.e. SAP R/3.
    The Idocs status in the sender system is showing as 03 with the message "Idoc sent to sap system" in transaction BD87.
    So I am getting confused where I missed the configuration.
    Please suggest how I can troubleshoot the above.
    <<Text removed>>
    Regards,
    Rk.K
    Thanks in advance .
    Edited by: Matt on Jun 24, 2011 9:58 AM

    Thanks  a lot for your support.
    I have tried all the suggested solutions......but my problem was not solved.
    The Metadata should be automatically created when the IDOCS successfully received by the XI server.
    If it is not created then we should clear the SLD Cache in XI and try to create a new Metadata by giving the Custom IDOC Name and Port.
    Even I tried with a Standard Idoc ORDERS05 , but I failed to do so.
    After doing the above step I am getting the Information pop-up message "I::000".
    Regarding RFC, I have created 2 users in both the systems with the same name(ALEREMOTE) of type "System".But,I am unable to   Remote Login from XI to R/3 whereas the vice -versa is successful.
    Are there any chances for this being the reason for failure of Idoc processing?
    Such information message"I::000" is completely inexplainable.
    Kindly, suggest a solution for it. 
    Thanks.

  • SM58 status text " No service for system SAPERP, client 800 in integr "

    In Idoc to file scenario:
    i have fallowed this blog to configure ALE settings
    /people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
    I have generated one idoc successfuly from sap r/3 system.
    but i didn't find any idoc in xi server.
    control records are
    receiver:A000000036,(RFC DESTINATION->LS_XI_100( Remote login sucessful for xi system))
          LS_XI_100
          LS
    Sender: SAPERP
         LS_SAP_800
         LS
    ID: Adapter specific identifiers are( LS->LS_SAP800, R/3->ERP,CLIENT,800)
    so i have gone to tcode sm58 in sap r/3
       where i found the status text "No service for system SAPERP, client 800 in integr)
    Please help me from this problem.
    Regards,
    Deviprasad.

    Hi Deviparasad,
    please create a techincal system and busniess system of type ABAP in XI SLD if you have already created the techincal system and busniess system  then check whether client 800 is used or not if include client 800.
    please reward points
    Regards
    Sreeram.G.Reddy

  • How to Change  status text in ESS travel managemnet screen

    Dear All,
    What is the procedure to change the status/processing status text change in travel management  ESS screen.
    Regards,
    Palia

    Hi Pailia and all,
    I am with a client who has the same requirement (to customise the standard "processing status" wording which is shown against each trip in the ESS screen).  So far, I have not been able to identify where these texts can be changed.  If anyone can help that would be much appreciated?
    Many Thanks,
    Jack

  • IDOCs in trfc with status text as error

    Hi,
    I have IDOCs in trfc queue with status text as 'The ABAP/4 Open SQL array insert results in duplicate database records'.
    How to reach this error point and rectify the same.
    Regards,
    Sheetal

    Hi Sheetal,
    Please refer the link,
    Successfully posted IDOC from XI but not reflected in Receiver R/3 system
    Best Regards.
    Reward points if it is useful.

  • Status text error

    Hi all,
        I need help in resolving this issue. When viewing a production order status in COOIS transaction, I am getting a popup information message " Status text for object ORXXXXXXXX in order XXXXXXXXXX could not be determined". After that in the next screen (Order Information system), if i try to save that order, program terminates giving a runtime error "Message_type_X". Someone help in this regard.

    Hi,
    For changing the user status you can use this function module.
    STATUS_CHANGE_EXTERN.
    Hope thsi will help.
    Regards,
    Swarna Munukoti.

  • Status text for Equipment

    I am calling function
    CALL FUNCTION 'STATUS_READ'
    which returns a table of status for the equipment in the form 'E0001'.
    I want to get the text description of that status  such as 'ESTO' in order to compare with a value beign read from an input file
    Where can I find the textual description of the status
    J.J

    hi JJ,
    In Table <b>TJ02T</b> you can find the system status text table ...
    if it is answered please closed the thread by marking helpful answers else let us know for what you are looking for
    Regards,
    Santosh

  • IDOC Status text

    Hi,
    In the status table EDIDS some times the status message is storing in the field STATXT and some times it is storing in the variable STAPA1. As of now I am using the variable STATXT for fetching the status text but some cases STATXT is showing description as & & & &  and STAPA1 is showing correct status text. How to use these two variables correctly. If possible please send me the code I will give points.
    Thanks a lot in advance.

    issue with code for idoc
    interface code required........................IDOC
    Extracting data from iDoc tables
    Please reward points if helpful.

  • E-Recruiting Status text change

    Hi,
    My client is inquiring about the level of effort involved in changing the status titles (ex. Rejected to Not Hired), table T77RCF_RCD2STAT is used to assign status reasons to statuses. Can you please assist me at where the change would need to be made and what the level of effort and impact of this change would be?
    ...Naddy

    Hi Naddy,
    the status texts are domain values. So to change the texts you would have to do a modification on the domain.
    The dpomain names are like the names of the data elements: rcf_<object>_status while object is requisition, application, candidacy, ... .
    As long as you only change the texts and not change the allowed values i don't see a lot of impact. Off course with each support package / upgrade you would have to check the change as you do for each modification.
    Another effort which might be necessary is to check OTR text and messages if anywhere SAP put the status description in. This would have be to be checked and if found would have to be adapted.
    Best Regards
    Roman Weise

  • Sap RFC status text chinese

    Hi forum,
    My process chain crashed this night.
    When I look in my transactional RFC I see this rfc:
    Caller     ALEREMOTE
    Function Module     RSAR_TRFC_DATA_RECEIVED
    Target System     BWPCLNT020
    Date     28.01.2011
    Time     02:54:59
    Status Text     挀漀渀渀攀挀琀椀漀渀 挀氀漀猀攀搀 ⠀渀漀 搀愀琀愀
    Strange.
    Could you help me to find how to solve this error ?
    Thank you,
    Philippe

    did you install chinese  language in your system?

  • How to edit the Step status text

    For example, I want to change the status result which is produced on a report from 'Passed' to 'GO' or 'Failed' to 'NOGO'. I know that you can edit the report colors for the result text in the Report Options menu, but I can't seem to find a way to edit the actual result text. I've also looked in the horizontal.xsl stylesheet to no avail.

    I would start with modifying the report header. In the sequence ModifyReportHeader look at the parameter ReportHeader. It contains the UUT Result, usually "Passed" "Failed", "Error" or "Terminated".  Replace that part of the string accordingly.

  • Delivery block status text

    Hi,
    I need to get text for the field "DELIVERY BLOCK STATUS" under the tab "Shipping" in transaction VA03.
    The delivery block status is saved in VBUP-LSSTA and possible values for this are space,A,B and C.
    However in tarnsaction it is displayed as BLOCKED,Not blocked as shown in below fig.I want to know where these values for staus text are saved in system and how to retrieve them?

    They are stored in table TVBST.
    When the system is displaying VA03, it calls function module RV_DOCUMENT_POS_STATUS_TEXTS. This function will obtain the values from table TVBST. For example, look at this code in the function:
      READ TABLE XTVBST WITH KEY TVBST_KEY BINARY SEARCH.
      IF SY-SUBRC = 0.
        VBSTT-LSSTA_BEZ = XTVBST-BEZEI.
      ENDIF.
    If you look in SE16 for table TVBST and search for the following:
    Language                          EN
    Table name                        VBUP
    Field name                        LSSTA
    you will see the following entries:
    Language    Table name                  Field name                     Status Description
    E                  VBUP                           LSSTA                            Not blocked
    E                  VBUP                           LSSTA                    A      Not blocked
    E                  VBUP                           LSSTA                    B      Partially blocked
    E                  VBUP                           LSSTA                    C      Blocked
    This is where the descriptions are obtained from.
    Hope this helps.

  • System status text table

    Hi guys,
    I am looking for table where is stored text of system status from sale order. The system status I mean the status of item in status tab where is writen e.g CLSD FNBL MtoO RESA SETC. (CLSD - closed, FNBL - final billing...)
    I know that in table JEST there is ID of the system status, but I can´t find text of these statuses.
    Thanks for any clue.

    The table with text of system status is TJ02T.

  • Customize the Review Status Text?

    When reviewing a document, I noticed there are 3 different features you can assign to comments.  Set Migration Status, Set Review Status, and Checkmarks.  I was wondering if there is a way to change the verbage options in the Set Review Status option.  Does anyone know if this is possible via plug-in or otherwise?

    No,  there isn't a way to change the text for the Review Status.

  • Delivery Block Status text  / Billing Block Staus text

    In  the Sales Order Overview Screen
    Sales View
    Even though we had removed the delivery Block from the Schedule lines and saved the order,
    We still have the
    Delivery Block Status  as  BLOCKED
    Billing Block Status  as  BLOCKED
    How can we remove this?

    Hi,
    Check sales document type in configuration VOV8 whether delivery and billing is blocked. if it is blocked make it as blank. and check in sales order.
    Regards,
    Sasikanth.Ch

Maybe you are looking for