STATUS YELLOW ( URGENT  )

Hai all
I am getting status yellow for request in bi after scheduling info package ( after migeration of data source)
and in short dump of dataware house work bench I am getting following error : CONNE_IMPORT_WRONG_COMP_TYPE
EXCEPTION :CX_SY_IMPORT_MISMATCH_ERROR
AND TEXT OF ERROR AS ( ERROR WHEN ATTEMPTING TO IMPORT OBJECT " HIST2 " )
THANKS
CHAITHANYA

Hi Chaitanya ,
Just check with the text / value that you are trying to load  into ods ...
Regards
Nimesh

Similar Messages

  • Status YELLOW in the monitor

    Hello SDN,
    I made some changes to my datasource in R/3 and tried to extract the data from BW with out replicating the Datasource. The load is running from long time and it is till showing the status 'YELLOW'. Now, I want to stop the load both on BW side and R/3 side. I would appreciate if someone can give me the step by step process to stop the load both at BW and R/3 side.
    Best Regards,
    Nene.

    Hi Nene,
    If you want to stop the job First Goto Header tab in Monitor and copy the request and paste this in SM37 of R/3 system.
    Then you can see the job which is in Acitive state.
    Double click on that job go Job Deatails in menu bar and click on that now you can see Job information screen, there note down the Executing server  and         
    WP number/PID  of that job.
    Then go the T.code sm51> click on the server which you note down> then select the PID --> In menu bar goto Process and click on Cancel without Core. Then your job will cancel in SM37 aswell as in Monitor in BW.
    Hope will helpful..........
    cheers,
    Jana

  • STATUS YELLOW FOR REQUEST

    Hai all
    I am getting status yellow for request in bi after scheduling info package ( after migeration of data source)
    and in short dump of dataware house work bench I am getting following error : CONNE_IMPORT_WRONG_COMP_TYPE
    EXCEPTION :CX_SY_IMPORT_MISMATCH_ERROR
    AND TEXT OF ERROR AS ( ERROR WHEN ATTEMPTING TO IMPORT OBJECT " HIST2 " )
    THANKS
    CHAITHANYA

    Hi,
    Check is there any Start/Individual routines(ABAP) are there? Usally i occurs when exception raise.Try to debug the update rule solve your problem.
    Regards,
    Saran

  • FEBA - bank statements not processed (status yellow)

    Hi,
    When using the FEBA transaction (Bank statements), some bank statements were not processed. They have the status yellow.
    What does this mean?
    How can I process it?
    Thank you.
    Kind regards,
    Linda

    Hi Linda,
    First of all check, the vendor address details. Is your SAP Version ECC6. If so, from FK02 Vendor master change - in the vendor address details maintain the postal code and city details and once again execute the proposal run. Delete the earlier proposal and enter a fresh proposal. This should work.
    Alternativelya lso check your FBZP settings.
    Hope this helps. Assign points if useful.
    regards,
    radhika

  • Infopackage - load to ODS - status yellow !

    Hi everybody,
    I am on BI 7.0 and i use Architecture 3.5.
    When i transfer data (36000 records about) from a data table to ODS, i obtain for the 2 last days
    a problem of loading -
    > Status is always yellow.
    As concerns TRFC, In transaction sm58, i obtain the following error:
    RFC:     RSAR_TRFC_DATA_RECEIVED
    Status:  Conversion Error
    I have different behaviours following configuration of my InfoPackage when Incorrect Data Records Occur:
       - Valid Records update, reporting possible -
    > Status Yellow
       - Valid records update, no reporting       -
    > Status Red (few records are wrong)
    Have you any ideas ?
    Thanks a lot,
    Rodolphe.

    Hi,
    If your data packets are getting into BW, then check your transfer and update rules, for any routines where the data is getting stuck.
    If there are warnings, in the infopackage there is an option for treatment of warnings. Select the radio button as green and then reload the data.
    Also suggest you keep an eye on SM50/51/66 to check what's happening with the data load.
    Check the size of the data packets. If possible reduce the data size of the packets and see if that helps.
    Cheers,
    Kedar

  • JMS status Yellow in J2SE Adapter Engine Screen

    Hi All,
    I have tried to configure the JMS Adapter in J2SE Adpater Engine but the status is Yellow.and after that when we went to trace we found the error which is as follows:
    com.sap.aii.messaging.adapter.ModuleHandlerImpl [Thread[Thread-11,5,main]] Error: Error creating module:java.lang.NoClassDefFoundError: javax/jms/MessageListener
         at java.lang.ClassLoader.defineClass0(Native Method)
         at java.lang.ClassLoader.defineClass(Unknown Source)
         at java.security.SecureClassLoader.defineClass(Unknown Source)
         at java.net.URLClassLoader.defineClass(Unknown Source)
         at java.net.URLClassLoader.access$100(Unknown Source)
         at java.net.URLClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.findSystemClass(Unknown Source)
         at com.sap.aii.messaging.adapter.AdapterClassLoader.loadClass(AdapterClassLoader.java:67)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at com.sap.aii.messaging.adapter.ModuleHandlerImpl.createModuleSynced(ModuleHandlerImpl.java:406)
         at com.sap.aii.messaging.adapter.ModuleHandlerImpl.run(ModuleHandlerImpl.java:612)
         at java.lang.Thread.run(Unknown Source)
    Can anyone help us?
    Regards
    Sathya

    Hi,
      Thanks a lot.i have already appended the jar files to the class path.i guess the entries of JMS Adapter defined in the Configuration screen is not proper. Bcoz i am getting the following error.
      ...i.messaging.adapter.ModuleHandlerImpl [Thread[Thread-11,5,main]] Info: action=1 not possible - no module found
    ...i.messaging.adapter.HTTPRequest.run() [Thread[Thread-243,5,main]] Error: java.util.NoSuchElementException
         at java.util.StringTokenizer.nextToken(Unknown Source)
         at com.sap.aii.messaging.adapter.HTTPRequest.run(ModuleGUIBrowserEngine.java:366)
    ..aii.messaging.adapter.XMBParameters [Thread[Thread-244,5,main]] Info: Getting parameters: default value '20' set for parameter 'version'
    Apr 21, 2006 3:14:05 PM  ...p.aii.messaging.adapter.XMBParameters [Thread[Thread-244,5,main]] Info: Getting parameters: default value '' set for parameter 'XMB.ReceiverBusinessSystem'
    Apr 21, 2006 3:24:11 PM  ...sap.aii.messaging.adapter.AdapterImpl [Thread[Thread-269,5,main]] Info: Destroy and remove adapter instance 'jms_receiver'
    Apr 21, 2006 3:24:11 PM  ...essaging.adapter.ModuleAdapterMonitor [Thread[Thread-269,5,main]] Info: Adapter(s) 'jms_receiver' suspended successfully
    Apr 21, 2006 3:24:28 PM  ...i.messaging.adapter.ModuleHandlerImpl [Thread[Thread-11,5,main]] Error: Error creating module:java.lang.NoClassDefFoundError: javax/jms/MessageListener
         at java.lang.ClassLoader.defineClass0(Native Method)
         at java.lang.ClassLoader.defineClass(Unknown Source)
         at java.security.SecureClassLoader.defineClass(Unknown Source)
         at java.net.URLClassLoader.defineClass(Unknown Source)
         at java.net.URLClassLoader.access$100(Unknown Source)
         at java.net.URLClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.findSystemClass(Unknown Source)
         at com.sap.aii.messaging.adapter.AdapterClassLoader.loadClass(AdapterClassLoader.java:67)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at com.sap.aii.messaging.adapter.ModuleHandlerImpl.createModuleSynced(ModuleHandlerImpl.java:406)
         at com.sap.aii.messaging.adapter.ModuleHandlerImpl.run(ModuleHandlerImpl.java:612)
         at java.lang.Thread.run(Unknown Source)
    What do we need to do?
    Regards
    Sathya

  • Cannot set status of Urgent Change after manual transport

    Hi all,
    We are usng CHARM in Solution Manager 7.1 for import to the SAP ECC (EHP6) systems.
    I cannot set the status of the Urgent Change document (ZMHF) to status "To be Tested" after the transports were manually released and manually imported to the ECC QA system.
    When I use action "Pass Urgent Change to Test", the system stopped with error "Not all task are yet released" and will not change the status .
    Based, on the Task List log, the system started the release process although no transports were released.
    Is there any way that I can update the status of the Urgent Change document to "To be Tested"?
    I tried program CRM_SOCM_SERVICE_REPORT but still did not change the status.
    Any suggestion?
    Thanks,
    Tess

    Hi Venu,
    have a look under System Administration - System Configuration -- Knowledge Management -- Configuration --Content Management -- User Interface -- Commands -- UI Command Groups -- StatemanagementGroup.
    See Java class: com.sapportals.wcm.rendering.uicommand.cm.UIStatemanagementGroupCommand. Take the class and decompile this and everything needed around to understand how this class works.
    Then you can choose to extend this CommandGroup to also have a command "Resubmit for Approval" or you can implement your own UI Command only for resubmitting (you will also have to activate your command (group) by settings within the configuration).
    On the other hand, if all this is completely new to you, I'm a bit sceptical if the task isn't a bit too big as a first task on KM implementation topics...?
    Hope it helps
    Detlev

  • Process Chain Status Red, DTP status yellow, DTP is green from inside

    Hello All,
    I have a problem where the  Process Chain  status is red, but the process(DTP) status is yellow.
    When I right click on the yellow process there is no error message and the DTP is green in Process Monitor.
    But the chain did not complete and the rest of the process steps are grey.
    After 20 minutes the Process Chain ran again(automatically after new data arrived) and this time without errors and it went green.
    My question is, how to proceed with the red Process chain and complete the further process and make it green.
    Regards
    Alex

    hi,
    There are scenarios where you need to change status of a process chain or a particular step in process chain.
    You might need to change the status in the cases where we need mark these steps successful so that dependent steps get processed. There are other scenarios where one needs to change the status of a single step in the process chain or status of whole process chain.
    Step by step instructions on change process chain status
    1. Right click on the failed step in the process chain monitor and go to displaying messages
    2. Go to u2018Chainu2019 tab and note down variant, instance and start date
    3. Go to SE16 and the table RSPCPROCESSLOG and enter variant, instance and start dates from step 2 and note down log_id, type, variant, instance.
    4. Go to SE37 transaction and execute the function module RSPC_PROCESS_FINISH and enter the values from step 3 and enter the new status u2018Gu2019 in status field and execute the FM
    5. This sets the status of the process chain (PC)
    After you set the status using the FM, go to the monitor screen of the process chain, you will notice the changed status. Now dependent steps in the process chain will start running
    Thanks

  • Vault status yellow when launching Aperture?

    I have noticed that when I launch Aperture, the Vault status is always yellow. This is even after I have updated the Vault before I quit Aperture. I think it started after I created a MobileMe Gallery. Is there a correlation?
    -Scrags

    Sounds like the vault might be corrupted. As vaults are just snapshots of the current state of the library I would try making a new one and see if that updates. If it does just abandoned the old vault and use the new.
    If the new vault fails also post back.

  • Status profilremanagement Urgent plz

    hiall,
    we have a requirement in campaign the user should not set the status of a campign once it is rejected
    we made settings its working fine but the problem is
    after rejected status there are some more status having the value higher than rejected status when they are selecting that they are able to change the all statuses including rejected status.
    plz tell me how to solve this pbm
    its urgent
    points will be rewarded
    thanks in advance
    madhuri

    Hi Madhuri,
    Your problem can be resolved by maintaing the status numbers in the status profile:
    Example of how Lowest Status Number works:
    Status A has status number 30 and the 'lowest status number' 10. Status B has status number 40 and the 'lowest status number' 20.
    - Once status B was active for the object, only statuses with numbers 20 or higher may be activated, even if status A is currently active.
    - However, if status B has never been active, statuses with status numbers 10 or higher may be activated if status A is currently active.
    Example of how Highest Status Number:
    - Status A has the status number 30 and the 'highest number' 50.
    - If status A is active, only statuses with status numbers 50 or less can be activated.
    Therefore, while defining your status profile for the status 'Rejected', once you assign a status number for it, make user that other statuses doesn't possess the same number in both Highest Status Number and Lowest Status Number as well.
    So according to your current requirement, maintain the status number accordingly to your need. This can be done while defining status profile in the following IMG path:
    IMG->Customer Relationship Management->Marketing->Marketing Planning and Campaign Management->General Settings->Change Status Profile for User Status.
    Wish this is useful to you
    regards
    Srikantan

  • Dispatcher status yellow after kernel update.

    Hi exsperts.
    my system SQL2005 on Windows2003.
    After updating kernel from 146 to 179 system status in sapmmc turned yellow with info:
       dispatcher Runnig but Dialog Queue info unavailable, J2EE:All processes runing.
    second issue:
       In sapmmc : AS ABAP WP Table is empty.
    Any idea what is wrong ?
    Below Abap Trace  of disp+work.exe
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      44
    sid        ERD
    systemid   562 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    179
    intno      20050900
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        5332
    Sun Oct 26 10:37:29 2008
    kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (44 5332) [dpxxdisp.c   1285]
         shared lib "dw_xml.dll" version 179 successfully loaded
         shared lib "dw_xtc.dll" version 179 successfully loaded
         shared lib "dw_stl.dll" version 179 successfully loaded
         shared lib "dw_gui.dll" version 179 successfully loaded
         shared lib "dw_mdm.dll" version 179 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3944
    Sun Oct 26 10:37:34 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5418]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >sap-dev_ERD_44                          <
    DpShMCreate: sizeof(wp_adm)          28032     (1752)
    DpShMCreate: sizeof(tm_adm)          58861440     (29416)
    DpShMCreate: sizeof(wp_ca_adm)          80000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     160000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=2000/16/2208064/2208080
    DpShMCreate: sizeof(comm_adm)          2208080     (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1864)
    DpShMCreate: sizeof(wall_adm)          (416064/346352/64/192)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000F020050, size: 62108928)
    DpShMCreate: allocated sys_adm at 000000000F020050
    DpShMCreate: allocated wp_adm at 000000000F0221F0
    DpShMCreate: allocated tm_adm_list at 000000000F028F70
    DpShMCreate: allocated tm_adm at 000000000F028FD0
    DpShMCreate: allocated wp_ca_adm at 000000001284B750
    DpShMCreate: allocated appc_ca_adm at 000000001285EFD0
    DpShMCreate: allocated comm_adm at 00000000128860D0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 0000000012AA1220
    DpShMCreate: allocated gw_adm at 0000000012AA12A0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 0000000012AA12D0
    DpShMCreate: allocated wall_adm at 0000000012AA12E0
    MBUF state OFF
    DpCommInitTable: init table for 2000 entries
    rdisp/queue_size_check_value :  -> off
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 767 blocks reserved for free list.
    ES initialized.
    mm.dump: set maximum dump mem to 96 MB
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 5888
      argv[0] = D:\usr\sap\ERD\DVEBMGS44\exe\jcontrol.EXE
      argv[1] = D:\usr\sap\ERD\DVEBMGS44\exe\jcontrol.EXE
      argv[2] = pf=D:\usr\sap\ERD\SYS\profile\ERD_DVEBMGS44_sap-dev
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=64999
      argv[5] = -DSAPSYSTEM=44
      argv[6] = -DSAPSYSTEMNAME=ERD
      argv[7] = -DSAPMYNAME=sap-dev_ERD_44
      argv[8] = -DSAPPROFILE=D:\usr\sap\ERD\SYS\profile\ERD_DVEBMGS44_sap-dev
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1692]
    ***LOG Q0K=> DpMsAttach, mscon ( sap-dev) [dpxxdisp.c   12408]
    Sun Oct 26 10:37:35 2008
    DpStartStopMsg: send start message (myname is >sap-dev_ERD_44                          <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    CCMS: Checking Downtime Configuration of Monitoring Segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpJ2eeLogin: j2ee state = CONNECTED
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 179
    Release check o.K.
    Sun Oct 26 10:38:14 2008
    MBUF state ACTIVE
    Sun Oct 26 10:38:15 2008
    DpModState: change server state from STARTING to ACTIVE
    Sun Oct 26 10:40:24 2008
    J2EE server info
      start = TRUE
      state = ACTIVE
      pid = 5888
      http = 54400
      https = 54401
      load balance = 1
      start_lazy = 0
      start_control = SAP J2EE startup framework
    Sun Oct 26 13:32:51 2008
    SoftCancel request for T22 U508 M0 received from IC_MAN
    Sun Oct 26 13:34:56 2008
    SoftCancel request for T16 U509 M0 received from IC_MAN
    Sun Oct 26 20:59:29 2008
    SoftCancel request for T20 U875 M0 received from REMOTE_TERMINAL
    Mon Oct 27 07:11:15 2008
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 7 / sock 260
        (SI_ECONN_BROKEN/10054; I4; ST; 172.18.254.229:1902) [nixxi.cpp    4424]
    Network error of client T19, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T19 is 172.18.254.229(sap-dev.etos.pl)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (17761SAPSYS 19 sap-dev ) [dpxxdisp.c   12086]
    RM-T19, U17761, 000       SAPSYS, sap-dev, 06:09:33, M0, W0, SESS, 2/0
    Mon Oct 27 12:25:13 2008
    SoftCancel request for T28 U18469 M1 received from REMOTE_TERMINAL
    Mon Oct 27 12:26:07 2008
    SoftCancel request for T28 U18469 M0 received from REMOTE_TERMINAL
    Mon Oct 27 17:09:37 2008
    SoftCancel request for T36 U19479 M0 received from REMOTE_TERMINAL
    Mon Oct 27 17:12:41 2008
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 15 / sock 152
        (SI_ECONN_BROKEN/10054; I4; ST; 172.22.17.122:4298) [nixxi.cpp    4424]
    Network error of client T22, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Mon Oct 27 17:12:42 2008
    Client address of T22 is 172.22.17.122(0278-n.etos.pl)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (19469A.JODKO 22 0278-n ) [dpxxdisp.c   12086]
    RM-T22, U19469, 401      A.JODKO, 0278-n, 16:52:23, M0, W1, VF03, 2/1
    Mon Oct 27 17:23:29 2008
    SoftCancel request for T19 U18317 M0 received from REMOTE_TERMINAL
    Mon Oct 27 17:25:58 2008
    SoftCancel request for T19 U18317 M0 received from REMOTE_TERMINAL
    Tue Oct 28 07:38:37 2008
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 6 / sock 340
        (SI_ECONN_BROKEN/10054; I4; ST; 172.18.254.229:3843) [nixxi.cpp    4424]
    Network error of client T17, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T17 is 172.18.254.229(sap-dev.etos.pl)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (21618SAPSYS 17 sap-dev ) [dpxxdisp.c   12086]
    RM-T17, U21618, 000       SAPSYS, sap-dev, 06:36:54, M0, W0, SESS, 2/0
    Tue Oct 28 08:55:49 2008
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 9 / sock 224
        (SI_ECONN_BROKEN/10054; I4; ST; 172.20.1.21:1708) [nixxi.cpp    4424]
    Network error of client T18, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T18 is 172.20.1.21(0082-d.etos.pl)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (18414A.KACPERSKA 18 0082-d ) [dpxxdisp.c   12086]
    RM-T18, U18414, 401  A.KACPERSKA, 0082-d, 10:15:55, M0, W0,     , 2/0

    I have fixed this problem yesterday.
    Problem was in different verssions of sapstartsrv.exe
    Vincent Lim you are right, good answer good points
    Regards

  • Instance Status Yellow on SAP MMC Console

    Dear Experts,
    We are installing NW 7.0 dialog instance on Windowsx64 bit platform, Central instance is running on Aix64 bit,
    NW 7.0 Java add-in has installed on Central instance,
    I want to start only abap instance on new windows application server, i set rdisp/j2ee_start parameter to "0",
    Now java process do not start but SAP mmc console status is yellow because of it, disp+dowk process message is J2EE status info unavaliable,
    How can unistall Java instance from newly instaled application server ?
    Best Regards

    Hi,
    Regarding the MMC display "J2EE status info unavailable", as you don't want a dual stack remove the entry icm/HTTP/j2ee_0 from the instance profile and set the parameter 'is/HTTP/default_root_hdl = abap'.
    Please reboot your system (bounce OS) to see if this helps.
    If this does not help please try this.
    1. Stop the SAP service
    2. Open a command prompt
    3. Go to usr\sap\<SID>\...\exe\run
    4. call 'sapstartsrv.exe -t' from the command line
    5. Confirm the dialog window
    6. Start the service again
    Best Regards
    Niraj

  • Workflow task stays in 'In process' status. - Urgent Please

    Hi Workflow Gurus / Ramki,
    My workflow task ( which is a background task) remains in <b><u>'In process'</u></b> status. If I test this task using SWUS, it works fine but doesn't work when workflow is triggered.
    Any clue ?
    Please help. It is bit urgent.
    Warm Regards.
    Pras

    Ramki,
    What a star you are !
    I checked short dumps and managed to resolve this issue.
    Full points for your mate.
    Regards.
    Pras

  • Request status yellow and no records pulled

    Hi ,
    I am working on a newly installed BI system.I have installed 0figl_c10 cube and respective flow.The data source is 0fi_gl_10 which contains 0.1 million records in R/3 trans RSA3.When i try to pull the data nothing is coming into my system except the yellow status of the request with '0' records.
    Can you suggest how we can resolve this considering that its a newly installed  system.
    Thnaks
    Sri

    Check out this thread also [/message/8815574#8815574 [original link is broken]]

  • REQUEST STATUS YELLOW WHILE MONITOR STATUS GREEN - BI7

    Hellow,
    I try to load data with 0CO_OM_OPA_1, 0CO_OM_WBS_1 into Z cubes which are similar to the business content cubes 0OPA_C11 and 0WBS_C11 respectively.
    ETL is BW3.5 (transfer rule and update rules). When I look at the request in the monitor, I see that everything is green but the request status is yellow and not available for reporting. I can change the status to green manually but this is not a good solution for me.
    By the way the same load works well with te standart cubes.
    I use BI7 but I use BW3.5 business content.
    What could be the reason for such problems?
    Regards,
    Hadar

    Hi Hadar,
    We have exactly the same proble. Have you found a solution to it? I'm using Datasource 0HR_PT_2 to load data into Infocube ZPT_C01 (a copy of 0PT_C01). The monitor of the infopackage is green. There are no errors whatsoever. The status for the request in the Infocube>Manage is set to yellow and the data is not available for reporting. I can set it manually to green, but as you said yourself, it'd be nice to have an automated wway of doing this. Is there any way around this problem?
    Thanks
    Michalis

Maybe you are looking for

  • Verizon Wireless has stolen my money

    I went to "edge up" on one of my lines.  The Verizon wireless representative took about $350.00 from my debit card, when they were only supposed to take $26.00.  Now after more than 20 hours of my time over a period of almost 2 weeks of trying to get

  • Authorization at profit center level

    Dear All, In FI Module we have a requirement of Authorization at Profit Center Level. For Example : in FB50 transaction we want to allow some users to enter only for "1001" profit center. We have tried the following : We have create authorization obj

  • I want to revert to Firefox Version 4 (and remove Version 5). How do I do this?

    I just downloaded the newest Version of Firefox (5.0) and now my McAfee Site Advisor won't work. For that reason, I wish to go back to the older 4.0 Version. How do I go about doing this?

  • Creating instances of a movie clip using Actionscript

    I have a script that pulls a specified amount of Movie clips from the library to the stage, and that part of my script works. I want to add a button that will stop the movie clips but the Movie clips do not have instance names since they were pulled

  • LMS 4.1 No User Defined Groups shown in Fault Notification Groups?

    Hi, I created some User Defined Groups in LMS 4.1, now I want to apply certain fault notification groups to Event Sets. Unfortunately the Groups I configured are not in the Group Selector of the Fault Notification Group: Admin > Network > Notificatio