Statutory Information Tab Missing on Assignment Form

Hello Group,
I have open India, Responsibility and UK responsibility. The problem is that I am not able to see the Statutory Information Tab enable. This tab is disable
Can anyone suggest me how can i Enable the filed
UK Super HRMS Manager > Enter and Maintain > Query Employee > Click Assignment button> Click
Statutory Information Tab> Click in grayed out field to access additional information.
I have already seen this Metalink doc: 428352.1
Can anyone suggest me for the same.
Thanks

That note states this is intended functionality for UK. Are you wanting the tab to be enabled for India ? If so, have you enabled India legislation using DataInstall anf applied the latest hrglobal patch ? See MOS Doc 140511.1 ( How to Install Legislative Data Using Data Installer and hrglobal.drv )
HTH
Srini

Similar Messages

"purchase order information" tab

hi all,
what is the information on "purchase order information" tab from employee assignment interface used for? i was told iexpense would use it. is that correct?
plz advise

Purchasing account generator can be set to get cost center from there. So that the invoice can charge to that cost center.
HTH
Dinesh

COMPLETLY FORM TAB MISSING

Hi Expertes,
What is Completley Form Tab missing in portal.What is form tab.
Thanks
nimmagadda

Chakri,
can you explain the scenario in detail
Thanks
Bala Duvvuri

I type information on a form and submit. I get an error message that the information is missing even though I see it on the form. How can I resolve this problem?

I type information on a form and click submit. I get an error message that states that the information is missing even though I see it on the form. (Error message: Please type valid first name). How can I resolve?
== URL of affected sites ==
http://https://ushsbc71.recruitmax.com/MAIN/CareerPortal/candidate_update.cfm?szOrderID=88393&szCoverLetter=yes

Please see [[Use the Adobe Reader plugin to view or download PDF files]]

Uploading assignment's Statutory Information via API

Can someone tell me which API should I use to upload employee assignment's statutory information? (such as GRE etc)
I don't find any relevant parameters in update_assignment_criteria API.
Is there some separate API available for that?
Can some one help me!
regards,
Faraz

I Fixed de problem use the hr_assignment_api.update_emp_asg
If the combination don't exists, then hr_assignment_api.update_emp_asg API Create new combination-
Example.
=======
     BEGIN
hr_assignment_api.update_emp_asg
               (p_validate => FALSE
               ,p_effective_date => ind_asg.asg_effective_start_date
               ,p_datetrack_update_mode => 'CORRECTION'
               ,p_assignment_id => ind_asg.assignment_id
               ,p_object_version_number => ln_asg_object_version_number
               --,p_ass_attribute2 => ln_razon_social --lv_regimen
               ,p_segment1 => ln_gre_org_id -- Organization id
               ,p_segment6 => ls_segment6 -- New Value Segment 6
               ,p_cagr_grade_def_id => ln1_cagr_grade_def_id          -- IN OUT
               ,p_cagr_concatenated_segments => lv1_cagr_concatenated_segments      -- OUT
               ,p_concatenated_segments => lv1_concatenated_segments           -- OUT
               ,p_soft_coding_keyflex_id => ln1_soft_coding_keyflex_id          -- IN OUT
               ,p_comment_id => ln1_comment_id                -- OUT
               ,p_effective_start_date => ld1_effective_start_date          -- OUT
               ,p_effective_end_date => ld1_effective_end_date           -- OUT
               ,p_no_managers_warning => lb1_no_managers_warning          -- OUT
               ,p_other_manager_warning => lb1_other_manager_warning           -- OUT
               ,p_hourly_salaried_warning => lb_hourly_salaried_warning -- out nocopy boolean
,p_gsp_post_process_warning => ls_gsp_post_process_warning -- out nocopy varchar2
Regards Angel Isidoro

REJECT_CODE Vendor information and/or Operating Unit information is missing

hi
i am using Oracle Applications : 11.5.10.2.
i am trying to load suppliers and suppliers data into oracle AP.
i tried doing this with some sample data.
i executed the following code below :
insert into AP_SUPPLIERS_INT (VENDOR_INTERFACE_ID, VENDOR_NAME, SEGMENT1, STATUS)
values (*10006*,'XXX Financials2','199999','NEW');
i then ran the following process:
Supplier Open Interface Import
the supplier was added without errors
i then inserted a record into the
AP_SUPPLIER_SITES_INT table :
vendor_interface_id =*10006*,
LAST_UPDATE_DATE= SYSDATE,
LAST_UPDATED_BY          ='123',
VENDOR_SITE_CODE = 'true test' ,
CREATION_DATE     =SYSDATE ,
CREATED_BY     ='123' ,
PURCHASING_SITE_FLAG= 'N' ,
PAY_SITE_FLAG     = 'Y' ,
ATTENTION_AR_FLAG     = 'N' ,
ADDRESS_LINE1     ='gmmm df' ,
ADDRESS_LINE2     ='gmmm dfdv' ,
ADDRESS_LINE3     ='gmmm dfvdd' ,
ADDRESS_LINE4     ='gmmm dfvdd' ,
PAYMENT_METHOD_LOOKUP_CODE='Check' ,
TERMS_DATE_BASIS     ='Current' ,
ACCTS_PAY_CODE_COMBINATION_ID     = '1365' ,
PREPAY_CODE_COMBINATION_ID     = '1470' ,
PAYMENT_PRIORITY     = '99' ,
TERMS_ID= '10001' ,
INVOICE_AMOUNT_LIMIT =20,
PAY_DATE_BASIS_LOOKUP_CODE     = 'DISCOUNT' ,
ALWAYS_TAKE_DISC_FLAG= 'A' ,
INVOICE_CURRENCY_CODE     ='JMD' ,
PAYMENT_CURRENCY_CODE     ='JMD' ,
HOLD_ALL_PAYMENTS_FLAG='N' ,
HOLD_FUTURE_PAYMENTS_FLAG     ='N' ,
HOLD_UNMATCHED_INVOICES_FLAG= 'N' ,
EXCLUSIVE_PAYMENT_FLAG= 'N' ,
EXCLUDE_FREIGHT_FROM_DISCOUNT     = 'N' ,
ORG_ID= '142' ,
CREATE_DEBIT_MEMO_FLAG= 'N' ,
OFFSET_TAX_FLAG= 'N'
i then ran the following process:
Supplier Sites Open Interface Import
the process completes with a status of 'Normal'.
below is an extract of the output :
Supplier Sites Open Interface Import Execution Repor Page: 1
Import Options: All
Batch Size: 1000
Print Exceptions Only: No
Sites Open Interface Audit Report
Org Id Supplier Number Supplier Name Site Name
Total Sites Imported: 0
*** No Data Exists for this Report ***
Sites Open Interface Rejections Report
Org Id Supplier Number Supplier Name Site Name Reason
Total Sites Rejected: 0
when i checked the AP_SUPPLIER_SITES_INT table ,
the REJECT_CODE field has the value *'Vendor information and/or Operating Unit information is missing.'*
I THINK ALL THE REQUIRED FIELDS ARE POPULATED
why am i recieving this error ? is this caused by a bug? is there a required field that i didn't populated ?
please help me to solve this ....
thanks much!!

Hi,
Could you please check : Doc ID: 316368.1 of Metalink...
Symptoms_+
The Supplier Site Contacts Open Interface Import program is not importing certain contact
information.
The Supplier Site Contacts Open Interface Import Execution Report shows the following Rejection
Reason:
Vendor information and/or Operating Unit information is missing
Cause_+
The Last_name field is a required field.
As per the Oracle Payables User's Guide.
Appendix G-111
AP_SUP_SITE_CONTACT_INT chart shows the LAST_NAME is a Required field
Solution_+
As per the Oracle Payables User's Guide.
Appendix G-111
AP_SUP_SITE_CONTACT_INT chart shows the LAST_NAME is a Required field
If you test this out directly in the Suppliers window in Oracle Payables:
Navigation: Suppliers-Entry
Queried up a Supplier, then clicked into the Site field under the Contact tab.
Entered the contact information and omitted the Last Name, when trying to save the record,
the system gives the following message:
*'FRM-40202: Field must be entered' and the cursor is on the Last Name field. This is a required*
field and is the intended functionality.
Hope this will help
Regards,
S.P DASH

HT5312 The option to reset security information tab isn't showing up for me, is there I way that I can make it show up. I have a rescue email address and it still doesn't show up. Please help!

The option to reset my security information tab is not available for me, I have a rescue email address in place and it still doesn't show up. Please help!

You need to ask Apple to reset your security questions; ways of doing so include clicking here and picking a method for your country, and filling out and submitting this form.
(96335)

WUC-17 Information was missing from the supplied file download request java

Dear Forms Guru,
Can anybody help why i'm receiving this error using webutil.
WUC-17 Information was missing from the supplied file download request java..
the result in my jinitiator console are the ff:
Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/webutil/webutil.jar from JAR cache
Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/webutil/jacob.jar from JAR cache
Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/java/f90all_jinit.jar from JAR cache
RegisterWebUtil - Loading WebUtil Version 1.0.5 Production
Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/java/toolbar_images.jar from JAR cache
connectMode=HTTP, native.
Forms Applet version is : 90290
2005-Feb-13 01:48:19.514 ERROR>WUC-17 [VBeanCommon.downloadFromURL()] Information was missing from the supplied file download request java.net.MalformedURLException: unknown protocol: c
2005-Feb-13 01:48:33.504 ERROR>WUC-17 [VBeanCommon.downloadFromURL()] Information was missing from the supplied file download request java.net.MalformedURLException: unknown protocol: c
2005-Feb-13 01:48:34.04 ERROR>WUC-17 [VBeanCommon.downloadFromURL()] Information was missing from the supplied file download request java.net.MalformedURLException: unknown protocol: c
Many thanks in advance...
benjie

Benjamin,
WebUtil tries to download the jacob.dll to the client. The error message you get is most likely caused by teh following section in teh webutil.cfg file
install.syslib.location=/webutil
## Do not change the following lines unless instructed to do so
install.syslib.0.7.1=jacob.dll|94208|1.0|true
install.syslib.0.9.1=JNIsharedstubs.dll|65582|1.0|true
install.syslib.0.9.2=d2kwut60.dll|192512|1.0|true
## But you can add your own libraries in here
#install.syslib.0.user.1=testwebutil.dll|204872|1.0|true
If you have all these files available on the PC, then most likely the problem can be found in the virtual path setting for this directory
<virtual-directory virtual-path="/webutil"
real-path="c:/webutil/lib" />
in /j2ee/Oracle9iDS/application-deployments/forms/forms90web/orion-web.xml
Pleae refer to the webutil documentation for teh exact configuration steps.
Hope this helps
Frank

How do I make an Assignment EIT available to a responsibility that doesn't have access to the Assignment form?

I have a responsibility which does not have access to the professional assignment form. However, they need access to the Costing information which is an Assignment Extra Information Type. How can I give them this EIT without not giving them the Assignment form and linking the EIT to it?

Hi,
Are you talking about seeded Costing then that is not an EIT. That is is Assignment --> Other --> Costing.
Probably what you can do is give them access to assignment form but make is disabled and then attach Costing which the they can update.
Thanks,
Avinash

Personal Information nodes missing in ECC 6.0

Hi,
Personal Information nodes missing in ECC 6.0
SAP HR Highest Level Support SAPKE60003
EA HR SAPKGPHD03
What may be the reason.
Note: Points will be rewarded immediately.
Kiran

Hello,
thank you so much.
I think that there is not soultion. SAP told me:
Dear Maria ,
You have set the Maximum period, Minimum remaining shelf life and
Total shelf life as zero. I tested this on our internal test system
and when these are all set to zero the fields PROD & SLED are not
visisble in the Material tab in tcode MIGO.
The shelf life is only checked when you enter a goods receipt if the
following prerequisites are met :-
1.The minimum remaining shelf life is maintained in the material master
record or in the purchase order. The minimum remaining shelf life is theminimum number of days for which the material must keep for the goods
receipt to be accepted by the system.
2.The shelf life expiration date check is active for the plant and
movement type in Customizing for Inventory Management.In the
transaction SPRO,if you check in SAP Reference IMG
Material Management > Inventory management and Physical Inventory
> Goods Receipt > Set Expiration date Check,the SLExp/prDt field
is checked for plant and material movement
Regards

How to set default value to user attribute in customized information tab

Hi Experts,
we created a custom attribute in Administration-managed custom attributes and now we are getting that attribute under customized information tab in user admin->identity management.
This attribute is coming for all users and it is working fine and I can give value to this attribute also.
Now the problem is we have more than 10000 users in the portal and we have to assign same value to this custom attribute to all the users.
Is there any possiblity of setting the value to all the user without coding.
If it is not possible then how can I proceed for coding.
any help will be appreciated.
Raghu

Hi Michael,
Yes my data source is LDAP. This attribute is added in the portal itself and I don't think it is possible to set the value of custom attribute at LDAP.
Shanta : We already created the custom attribute and it is also appearing in the Customized information
Problem is we need to set a value to that attribute. This should be same to all the users coming from LDAP.
My Basis people are asking the funtion module which calls when we click on the Customized information tab. Is that possible to know?
Or we can set this value by writing a piece of code in webdynrpo java?
Appreciate your inputs
Raghu

Query on Forms Personalization of Oracle Assignment Form

Hi All,
My customer has a requirement of personalization on the Assignment form. They would like to show the People group flex field segments but make them non-editable.
Since the People Group is a KFF, I am unable to figure out how to personalize this. If any of you has done this with any KFF, could you please let me know the steps to follow?
Thank you.
Regards,
Prathima.

Balamurugan wrote:
We are migrating Oracle forms 4.5 to oracle 10g. We have following apporaches.
     1. Oracle 4.5-->6i-->10g, In this what are benefits of migrating into intermediate version.Oracle's migration path is 4.5, 6i, 10g it is more logical to migrate using this path and it is recommended by Oracle, the obsolete built-ins would be pointed out at compilation and fixes would be more automated and simple since Forms 6i was designed to accept migration from 4.5 and the internal design of the forms will be much more adaptable to later releases.
     2. if we migrating into intermediate version 6i, do we need to fix all the errors before moving to 6i.It would be better and easier to fix things in Forms 6i rather than 10g, you can leave them and than you'll have to fix them under 10g.
     3. if no, do we lose any functionlity while migrating to 10g.Functionality built on obsolete built-ins and commands will be lost, you are more likely to face bugs.
     4. Does Oracle support direct migration to 10g?Oracle's official migration path is 4.5 to 6i to 10g
     5. if we open oracle 4.5 form in 10g form builder, do we lose any functionality? do we need to lot manual replacement?It all depends on your application size and features. I suggest you migrate to Forms 6i first and than to 10g although you can do it directly to 10g since Forms 6i is no longer supported.
I personally rather follow the recommended path and use Oracle support in 10g migration.
For more Forms migration information check out [Forms Upgrade Center|http://www.oracle.com/technology/products/forms/htdocs/upgrade/index.html] .
Tony

File Monitoring - Not able to see File Path on the Detail Information Tab

Hi Experts:
I am setting up the "File Monitoring" in the Solution Manager. I am having STA/PI01L_CRM570 on the Solution Manager.
And on the Satelite System - ECC I have STA/PI 01L_ECC600
While I am setting up the parameters, I am supposed to provide the file path in "Detail Information" tab page.
But I am just able to see two tabs:
Count and Short Text (optional).
I checked all the other tab but not able to locate where I need to provide the file path.
Can any one let me know, If I am missing anything or do I need to do any further steps.
Similarly for the File Size setting:
I am not able to see where I can define The parameter "File Pattern (e.g. *.log, *.txt or any string)" is mandatory.
Pls let me know.
Regards
John

Hello Johns,
You can find the FilePath in the 'Detail Information' tab if you double click the initial and predefined counter 001.
Best regards,
Goncalo Mouro Vaz

How do I exempt a FIELD from the TAB ORDER on a form

How do I make a field NOT part of the TAB ORDER? In other words, you can Tab around the page but you will never select this object. I want to create a text message that will show on the screen only but is not a field for editing.
If this is in the "help" and I've missed it, sorry. I couldn't find anything about this.
Thanks.

I have a form that I created with the save, print, etc buttons. I created mine as text fields rather then buttons and under Common Properties I have the Form Field set as Visible But Does Not Print, and then of course it's set under Actions to Execute a Menu Command. That does show up in the tab panel, however if you close the form editing and then go through the tab order of the form it skips right over it. The downside to this is that you have to have the Select tool in order to click and there is no mouse over, it's just a cursor like it would be in any other text field.
This is the only solution that I have found that somehow works for this.

How can I set the tab order in a form?

How can I set the tab order in a form?

Sorry. I don't mean page tabs, but the order in which form fields are selected by the tab key. In simple html there is a value called tabindex and I was just wondering if there is a way to assign this order within a portal form. I have basically recreated the form with a custom layout and adjusted the table structure to force the order I was looking for, but it would be a nice add for future versions.

Statutory Information Tab Missing on Assignment Form

Similar Messages

Maybe you are looking for