Statutory Reports and Returns
Hi Every one,
I want to know that whether the statutory reports and returns to be submitted in india is available in India or we have to customize and develop one.
I am not that aware of Forms...I have just gone to PE51 and tried to create a remuneration statement , thats all.
Also if the returns and reports formats are available in SAP . what is the Transaction Code to see and customize the forms available........
Please help to solve the query
Thanks And regards
Srijit
Hai..
Form 24 Form 16 Form 217(A) Other statutory deductions like section 80,88, 89(1), professional Tax... etc..
EASY ACCESS,HR,PY,ASIA,INDIA,SUBSEQUENT REPORTS, PERPAYROLL PERIOD, LEGAL REPORTS..
Manohar
Similar Messages
-
Statutory reports and returns in India .....
Hi Every one,
I want to know that whether the statutory reports and returns to be submitted in india is available in India or we have to customize and develop one.
I am not that aware of Forms...I have just gone to PE51 and tried to create a remuneration statement , thats all.
Also if the returns and reports formats are available in SAP . what is the Transaction Code to see and customize the forms available........
Please help to solve the queryHai..
Apart from Form 16, Form 24 Form 217(A).. there are many statutory reports to be maintained...
isbtcprd2\SAPHelp_470SR1\helpdata\EN\dd\38a63a04227748e10000000a11402f\frameset.htm
Kindly go through the link.. might be helpful to u...
Manohar -
CALL A TRANSACTION IN SIMPLE REPORT AND RETURN BACK TO REPORT
I 'VE A REQUIREMENT IN WHICH I HAVE TO MAKE A REPORT PROGRAM. IN THIS REPORT PROGRAM I HAVE TO CALL A TRANSACTION cs11 IN BACKGROUND AND THEN PICK ITS OUTPUT VALUE (DISPLAYED IN alv GRID OF cs11) AND THEN RETURN BACK TO MAIN PROGRAM. DO SOME CALCULATION WITH THE BROUGHT DATA AND THEN DISPLAY THEM ON THE REPORT alv OUTPUT.
iS THIS POSSIBLe? IF YES? HOW.
PLEASE HELP.try creating two reports.....ztest_a and ztest_b
do your call transaction in ztest_b
in ztest_a you can write submit ztest_a and return....
see if this works...
Message was edited by:
Priyank Jain -
How to submit a report and return a table?
Sumbit RVKRED01 and return .
then how to get table value from report RVKRED01 ???Follow the below example:
SUBMIT rashsd14
WITH vbeln IN l_rsdsselopt
WITH dbasar = c_x
EXPORTING LIST TO MEMORY AND RETURN.
*Getting the list from memory
REFRESH t_tab1.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = t_tab1
EXCEPTIONS
not_found = 1.
IF sy-subrc <> 0.
ENDIF.
*Converting to ASCII
REFRESH t_tab2.
CALL FUNCTION 'LIST_TO_ASCI'
TABLES
listasci = t_tab2
listobject = t_tab1
EXCEPTIONS
empty_list = 1
list_index_invalid = 2.
IF sy-subrc <> 0.
WRITE: / 'LIST_TO_ASCI error'(098).
ENDIF.
IF t_tab2 IS NOT INITIAL.
DELETE t_tab2 INDEX 1.
DELETE t_tab2 INDEX 1.
DELETE t_tab2 INDEX 1.
DESCRIBE TABLE t_tab2 LINES g_tabix.
DELETE t_tab2 INDEX g_tabix.
ENDIF.
REFRESH t_vbka1.
IF t_tab2 IS NOT INITIAL.
LOOP AT t_tab2 INTO wa_tab2.
CLEAR wa_vbka-vbeln.
REPLACE ALL OCCURRENCES OF '|' IN wa_tab2-vbeln WITH space.
CONDENSE wa_tab2-vbeln.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = wa_tab2-vbeln
IMPORTING
output = wa_vbka-vbeln.
wa_vbka-vbeln = wa_tab2-vbeln.
APPEND wa_vbka TO t_vbka1.
ENDLOOP.
SORT t_vbka1 BY vbeln.
ENDIF. -
Calling BSP from report and return control back ?
Hi All,
My requirement is as follows :-
1. I am calling a BSP from report using CL_GUI_HTML_VIEWER->show_url. The BSP page is displayed successfully.
2. Then, I perform some operations and want to return some data back to the main program (from where it was called - Report) and continue execution from there
How do I accomplish the second requirement (Control doesnt come back once I close the BSP) ?
Regards,
Ashishhow to generate events from html code in the html control back to your ABAP check out this demo program
SAPHTML_EVENTS_DEMO
say for example, in your case you are showing the BSP in GUI HTML control and on clicking a link you want to pass some data from your link to ABAP program and the ABAP should receive the value and process it and may be comeback to same BSP or go some to some other screen/transaction.
steps to follow:
after creating the html control
register event for call back and call the BSP url.
create object hviewer
exporting
parent = mycont.
myevent-eventid = hviewer->m_id_sapevent.
myevent-appl_event = 'x'.
append myevent to myevent_tab.
call method hviewer->set_registered_events
exporting
events = myevent_tab.
create object evt_receiver.
set handler evt_receiver->on_sapevent
for hviewer.
hviewer->enable_sapsso(
exporting
enabled = 'X'
exceptions
cntl_error = 1
others = 2
if sy-subrc <> 0.
endif.
call method hviewer->show_url
exporting
url = wf_url.
in your BSP the link should look like below
A HREF=SAPEVENT:TAGS?value to be passed to your ABAP> link text </a
when you click this link in bsp then you can then capture the value "TAGS" to know which link was clicked and the value passed after the ?
link is just one option, you can also send whole form data.
this type of link and form will only work when your BSP is invoked within HTML contro. if its invoked from standalone browser these wont work. so you amy want to dynamically show/hide "sapevent" links based on where it runs.
Hope this is clear. if not do getback.
Regards
Raja
Edited by: Durairaj Athavan Raja on Sep 9, 2008 1:04 PM -
Hi All,
I am using the submit statement to call my report. In my report I call another modal dialog box. My issue is I get blocked on the dialog box and the screen gets hanged. I have no option but to kill the session. I want the control to come back to my calling report after I have done my processing on the dialog box.
Kindly help as this is really urgent.
Thanks in advance.
Thanks & Regards,
AnjuHi Anju,
I think, this is happening because you dont any event on the dialog screen which will process the PAI. create back button and in PAI check for back. on back use leave to screen 0.
Process on Output.
module status.
Process on input.
Module check.
module status output.
set pf-status 'PF100'.
in PF100 , set BACK func code for back button
endmodule.
module check input.
case sy-ucomm.
when 'BACK'. leave to screen 0.
endcase.
endmodule.
Reward points if useful.
Regards
Megha -
SUBMIT and return the value of that report into internal table
Dear all,
I have a requirement. I want to submit a report and return the value of that report into my internal table.
How to do this.
Pl. guide.Hi Vidhya,
Below links from SAP help will resolve your issue.
http://help.sap.com/saphelp_nw04/Helpdata/EN/fc/eb3bde358411d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3bd1358411d1829f0000e829fbfe/content.htm
Edited by: Harsh Bhalla on Jan 2, 2010 11:54 AM -
How to call an alv report from another program and return back
Hello ,
I am calling one abap program (Prgm B) from another program (Prgrm A).
Here, Prgm B is an ALV report. I have fetch some data from Prgem B that gets stored in an internal table.
Now, I am using below code in Prgrm A,
SUBMIT Prgrm B VIA SELECTION-SCREEN
WITH SELECTION-TABLE rspar
EXPORTING LIST TO MEMORY
AND RETURN.
When Prgrm A executed, it lead me to selection screen of Prgrm B and when I click F8, it shows me the report output, In short, it doesnt return back to Prgrm A. It ends up showing me the alv report if Prgrm B even afetr using RETURN statement.
I want to get back to Prgrm A by fetching some data from Prgrm B.
Please let me know, if i am missing something.
Regards,
SeemaHi Seema,
Refer below code.
DATA: v_matnr LIKE mara-matnr.
DATA: t_listobject TYPE abaplist OCCURS 0 WITH HEADER LINE.
DATA: t_mara TYPE mara OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_ascilist OCCURS 0,
line(200).
DATA: END OF t_ascilist.
data var(3) type c.
SELECT-OPTIONS: s_matnr FOR v_matnr.
var = ' 3'.
START-OF-SELECTION.
SUBMIT ztestaks1 WITH s_matnr IN s_matnr EXPORTING LIST TO MEMORY
AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = t_listobject
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
CALL FUNCTION 'LIST_TO_ASCI'
* EXPORTING
* LIST_INDEX = -1
* WITH_LINE_BREAK = ' '
TABLES
listasci = t_ascilist
listobject = t_listobject
EXCEPTIONS
empty_list = 1
list_index_invalid = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
WRITE:/ 'Below are the lines from the submitted program.'.
LOOP AT t_ascilist.
WRITE:/ t_ascilist-line.
ENDLOOP.
SKIP 2.
ENDIF.
ENDIF.
IMPORT t_mara FROM MEMORY ID 'T_MARA'.
WRITE:/
'Here is the output from the table exported from the submitted program.'
LOOP AT t_mara.
WRITE:/ t_mara-matnr.
ENDLOOP.
Submitted program
REPORT ZTESTAKS1.
DATA: v_matnr LIKE mara-matnr,
v_maktx LIKE makt-maktx.
DATA: t_mara TYPE mara OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_makt OCCURS 0,
matnr LIKE makt-matnr.
DATA: END OF t_makt.
SELECT-OPTIONS: s_matnr FOR v_matnr,
s_maktx FOR v_maktx.
START-OF-SELECTION.
SELECT matnr INTO TABLE t_makt
FROM makt
WHERE matnr IN s_matnr
AND maktx IN s_maktx.
if not t_makt[] is initial.
SELECT * FROM mara
INTO TABLE t_mara FOR ALL ENTRIES IN t_makt
WHERE matnr = t_makt-matnr.
endif.
EXPORT t_mara TO MEMORY ID 'T_MARA'.
WRITE:/ 'This list is from the submitted program'.
SKIP 1.
LOOP AT t_mara.
WRITE:/ t_mara-mtart.
ENDLOOP.
Hopes this helps you.
Thanks,
Ashok. -
Report Script returns no data and "java.io.FileNotFoundException" error
When attempting to write to a new file (Eg: C:\TEST.txt), Report Script returns no data and "java.io.FileNotFoundException" error occurs.
This error occurs only in Essbase 9.3.1.3 release, however it works fine in release 9.3.1.0.
After running the report the script, it pops up the follwing message:
"java.io.FileNotFoundException: ..\temp\eas17109.tmp (The system cannot find the file specified): C:\TEST.txt"
When checked the TEST.txt, it was empty.Sorry folks, I just found out the reason. Its because there was no data in the combination what I was extracting.
but is this the right error message for that? It should have atleast create a blank file right? -
Submit ALV report in Background & exporting list to memory and return
Dear all,
I created one Z program (ZPROGRAM2).
Here i use SUBMIT ZPRORAM1_ALV exporting list to memory and return.
call function 'LIST_FROM_MEMORY'.
call function 'TABLE_COMPRESS' .
ZPRORAM1_ALV output i send mail.
This all are working in foreground.
If i schedule ZPROGRAM2 in background. that SUBMIT ZPRORAM1_ALV statement not working.
Please give me the Solution.
Thanks,
Durai.VIt is because of the ALV output that you are using. Check the condition sy-batch = 'X' (background processing) and then display a classical report. It will work then.
Thanks,
Jayant -
S_ALR_87012357 report - Advance Return for Tax on sales and purchase
Hi Friends,
I would like to know few things in regards the VAT report S_ALR_87012357 report - Advance Return for Tax on sales and purchase:
(1) What information brings the S_ALR_87012357 report?
(2) As of now this report displays tax against vendor line item and not expense line item. Is there any other report that shows all the positions lines affected to tax?
(3) Is it possible that the tax line stays only in the expense line account and not in the vendor line account or not any intercompany line account?
(4) Is it possible S_ALR_87012357 report shows information about the tax allocanted in expense accounts and not in vendor accounts?
Appreciate a faster response.
Thanks in advance.Please try report S_ALR_87012359. This report gives you opportunity to choose account selection.
I am unsure how the SAP is setup in your organisation. S_ALR_87012357 should pick up expenses selection as well.
This report entirely depends on tax code selection. -
Tax reportng and statutory reporting
Hi,
I'm looking for standard SAP reports for tax reportng and statutory reporting (for India). Please let me know, what are the standard reports that we have in SAP?
AmanHi,
Please refer to the following link in SAP help.
Regards
K.R
http://help.sap.com/saphelp_erp60_sp/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm -
Hello,
I have a Visual Studio 2010 C# class with a method that invokes/consumes a web service and returns an XML dataset. I am traversing through the parent/child nodes and parsing out the data then inserting it into a SQL Server 2008 R2 table for a join within
another stored procedure.
Instead of using a 3rd party API to generate the PDF for this data, I am creating an SSRS report. The formatting will be easier and I can do a RenderFormat directly to PDF.
Can I expect to be able to transfer the code-behind method to this report and have it be able to work with the web service the same way? It is a SOAP-based web service returning parent nodes and two levels of nested child nodes.
I have also been researching the approach of calling the web service in the same stored procedure that is currently querying the physical tables (which is used to populate a gridview and PDF) but it looks like it may only be possible with a CLR stored procedure.
Is it possible to implement a CLR stored procedure within an SSRS report?
Hope this makes sense. Any help, suggestion or point in the right direction would be greatly appreciated.
Thanks,
BusterHi Buster,
SSRS supports web service data source, we can call the SOAP-based web service in SSRS report directly. Then, we can use custom code in SSRS to parse the XML data. However, we won’t be able to join another data in SQL Server database.
Reference:http://technet.microsoft.com/en-us/library/aa964129(v=sql.90).aspx#repservxmlds_topic3
We cannot implement a CLR stored procedure within an SSRS report directly. In order to execute the CLR store procedure in a SSRS report, we have to execute it as text using the following code:
Exec <stored procedure name>
Reference:
http://dotnetslackers.com/Community/blogs/bmains/archive/2009/01/15/executing-a-clr-stored-procedure-in-reporting-services.aspx
Hope this helps.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support -
Statutory Report(Form16,Form24q,Form5,Form12 etc.
Hi,
Help me on the following issues,
1. How could we generate the following statutory reports like form16,form24q,form5,form12 etc.( wtih explenation about its uses and return information) under Ecc6.0.
2. What is the T-Code for each.(as I am taking help from Basis person).Hi,
Goto SAP Easy Access Menu -> Human Resources -> Payroll -> Asia/Pacific -> India -> Subsequent Activities -> Per Payroll Period -> Legal Reports
SAP Easy Access Menu -> Human Resources -> Payroll -> Asia/Pacific -> India -> Subsequent Activities -> Other Periods-> Legal Reports
SAP Easy Access Menu -> Human Resources -> Payroll -> Asia/Pacific -> India -> Subsequent Activities -> Annual-> Legal Reports
Regards,
Kanupriya -
How to develp a subreport in the same page of the main report and processed when is called
SSRS 2012
Hi guys,
I am developing a report that includes a subreport.
therefore The report is made up by 2 sections:
1) Show a grid (several rows - may be 100 or more - and some columns). It represent high level info (Each row represent a specific item)
2) The user click on a Row/column (eg: Item1, to see details that must be shown as graph.
Here the problem: Searching info about SSRS reporting for subreports, drilldown, nested report and so on, no ones accomplish the requirements for the following reasons:
1) Subreports: NOT open in the same page. The user must <go back> to see detail for other items, such as Item 2....
2) Nested and DrillDown: Process data as the Main report (they are hidden and displayed after user action). In my case this leads to performance problem, because: if the main report has 200 objects (it means 200 graphs processed and hidden at the same time
for the main reports).
3) DrillThrough and Subreport: The detail data are processed only when the user select the interested item in the main report. Here the problem: the report is shown externally.
Please, it there any possibility to have a subreport (or anything else) to be executed in the same report as the main report and processed only when the user make action?
Thanks for your help.Hi Fasttrack2,
According to your description, there is a main report with more than 100 rows of summary information, when users click the item of the row, the report need to jump to detail information shows as graph. The problem you are facing is that you are not sure
subreport, drilldown or drillthrough report should be used? You hope to set display detail information in the main report and keep high performance of report.
In Reporting Services, each subreport instance is a separate query execution and a separate report processing task. Subreports are recommended when there are just a few subreport instances. We should not use subreports inside a group when there are many
group instances, instead, consider using drillthrough reports. Drilldown reports process all data even when the data is first hidden. In order to improve the performance of the report, we can split drilldown reports into parameterized drillthrough reports,
because Drillthrough reports do not run until a user clicks the drillthrough link in the main report.
In this case, we can consider using drilldown or drillthrough report. In drilldown report, when we click a plus or minus button to expand or collapse a section of a report, the detail data will be displayed in place. By using drillthrough report, when we
click the link in the main report, the detail data will be displayed, we can come back to the main report by click return button in the drillthrough report.
Reference:
Troubleshooting Reports: Report Performance
Drillthrough, Drilldown, Subreports, and Nested Data Regions
If you have any more questions, please feel free to ask.
Best Regards,
Wendy Fu
If you have any feedback on our support, please click
here.
Maybe you are looking for
-
I have tried everything, I did a system recovery on my computer, reinstalled everything. I even reset my iphone 4S like if it was new, I erased everything. I made sure the USB cables are plugged in correctly. I used 2 different USB cables and nothing
-
Trouble Connecting Macbook Pro to HDTV
So I just bought a new LG TV and have been trying to connect my MBP to it but to no avail. I used a Mini Display Port-to-HDMI adapter and then a HDMI-to-HDMI cable to connect to the TV. However, the tv screen says no signal and it just displays the L
-
Since upgrading to Windows 8.1, iTunes no longer recognizes my iPhone or iPad. I tried to reinstall iTunes. That did not address my problem. Any suggetions on what I should do?
-
Config Settings: Commerce : Wish List tick box
I unticked the Wishlist in the above and expected to see the default red 'Save' buttons disappear from the WT site but despite re-caching the save buttons are stil there. Is this tick box functional in the current release? Thanks
-
Can't download photos into PSE 5.0. I use XP.
I get error message, "Adobe photo downloader has encountered a problem and needs to close. Error code: c06d007e Address: 7c812afb."