"Stay on this Page" "Leave this Page" pops up when using SAP URL?

Has anyone else experience this pop-up message when an SAP URL (www.sap.com) is embedded in a Personas frame??
No problem with non-SAP URL such as from the google.com family.
Same problem persist even in the WTS environment.
I had a quick discussion with Tamas Hoznek today and he experienced the same problem.
Seems to be a recent problem. I already logged an OSS ticket on this.
Thoughts anyone??
Thanks,
Frank

Hi Sushant,
Can you please help me with this?
I am in a flavor of MM02, and I want to display MMBE as part of the screen. I am using HTML viewer and the url I am using is
http://server:port/sap/bc/bsp/persos/mainapp/index.html?~transaction=MMBE%20MS_MATNR-LOW%3D1100292%3BDYNP_OKCODE%20ONLI
I have added following to whitelist
server:port/sap/bc/bsp/persos/*
server:port/sap/*
My HTML viewer control has url http://{1}. Key 1 is linked to an input field containing url. PushOnEnter event of the input field triggers a script that refreshes HTML control. I am getting following error.
SAP HTML Control
An error occured during SAPR3 page downloading: http://server:port/sap/bc/bsp/persos/mainapp/index.html?%7etransaction=MMBE%2520MS_MATNR-LOW%253D1100292%253BDYNP_OKCODE%2520ONLI
The scecified url is not in the white list.
Please, contact yout system administrator.
Can you please help me with this?
Regards
Abhi

Similar Messages

My link preview has disappeared from the bottom left of the page (it no longer pops up when I hover over a link.) Thoughts on how to get it back? I really LIKE having it!

My link preview has disappeared from the bottom left of the page (it no longer pops up when I hover over a link.) Thoughts on how to get it back? I really LIKE having it!

It is possible that the screen is too high and that the scroll bar and the find bar and add-on bar fall off at the bottom.
If that works then close Firefox (File > Exit/Quit) to save that setting.
See also:
* http://kb.mozillazine.org/Resizing_oversize_window
If the above didn't help then see:
* http://kb.mozillazine.org/Corrupt_localstore.rdf

Will pages automatically reformat to correct size when using Folio Builder or do I have to make pages iPad format, for example, in InDesign document set up from the start?

Will pages automatically reformat to correct size when using Folio Builder or do I have to make pages iPad format, for example, in InDesign document set up from the start?

Moved to DPS forum.
You need to set up the pages appropriately for the target device. For iPad that's 1024x768.

I cannot open the pages document created on my ipad when using my Mac. I've tried downloading the update but it needs Maverick. I've tried downloading Maverick and it fails.

I cannot open the pages document created on my ipad when using my Mac. I've tried downloading the update but it needs Maverick. I've tried downloading Maverick and it fails.

What OS version are you running?
Try the upgrade button here:
http://www.apple.com/osx/how-to-upgrade/

With TSM adware removal tool I was able to remove unknown software that was making ads pop up when using Safari. So the y don't pop up anymore. The problem now is that when I open safari It is still downloading websites and after awhile it

With TSM adware removal tool I was able to remove unknown software that was making ads pop up when using Safari. So the y don't pop up anymore. The problem now is that when I open safari It is still downloading websites and after awhile it freezes the browser. I have to constantly go to Safari Preferences to remove them and then the browser will start working again. What can I do to stop this?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

"Print page" doesn't work as intended when using lengthy tables. (Brother MFC 6490CW, possibly others)

I had originally thought this was a printing driver problem, but further testing indicated that this was not a problem in Internet Explorer and it was a problem in Firefox.
When printing some web pages using Mozilla Firefox, particularly those having sizable tables which would extend beyond the length of a single printed page, the remainder of the table is not printed even though the remainder of the web page itself is printed. The behavior is also noted when using Print Preview. See, for example, this web page which I created: http://alltherightwaystowrite.blogspot.com/2013/08/the-basics-capitalization.html
I inquired of other bloggers to see if they were also experiencing this issue. See, for example, the discussion I began here: https://productforums.google.com/forum/#!msg/blogger/EpD6K2ezIZE/a5mPu8CV0HwJ
As you can see, the only response I received indicated it was not an issue for that person with a different printer. This leads me to believe the problem is with either the MFC6490CW printer (unlikely) or the MFC6490CW printer driver (more likely) or perhaps with Firefox, or some combination of those three. This problem is duplicatable by me on successive attempts to print with any web page with a table extending beyond the length of a single page of printed paper. The output error occurs whether printing in portrait or landscape mode.
Saving a web page as "Web Page Complete" and opening up the web page in Microsoft Word created a variety of formatting errors, but otherwise, the entire contents of the page would have printed. Of course, this is not an ideal solution in any event. The entire document should print seamlessly across multiple pages without losing any data or content in the process.
As indicated above, as an additional test, I attempted to print the same web page in Internet Explorer and did not note the output errors described here. The web page printed correctly under those conditions. As a result, I believe that the most likely culprit is Firefox since Internet Explorer was also a good test case for my printer and printer driver, and it passed that test case.

https://bugzilla.mozilla.org/show_bug.cgi?id=521204 - this is a META Bug which is tracking all the Bugs which are related to '''Wrong page splitting / Missing page content when printing''' - 34 different Bugs, 14 of which are marked as solved.
IMO, that page would be better served with a print css script ''(as jscher2000 mentioned earlier)'' to make that a "printer ready" page, if wanting that page to be "printable" is your intention. As it now is that page is shrunk by about 50% with the "Shrink to Fit" feature engaged. Look at that page in Print Preview when the Scale is set to 100% instead of Shrink to Fit, and see that the page is so large that it shows that about 1/2 the width. Then decrease the zoom level in Print Preview to 50 or 60% to get that page to fit horizontally with the "Shrink to Fit" feature disabled. Looks like a case of "garbage in - garbage out".
I think the css used for that page uses too large a font which ''(IMO)'' forces Firefox to shrink the font too much to make that page fit to a letter size sheet of paper. And relying first upon the Print to Fit feature in the four different major browser engines ''(Gecko, Trident, WebKit, and Presto)'' and then the hundreds of print drivers out there is just looking for failures such as you are seeing; it works for some viewers and doesn't work for other viewers. What appears on the '''"screen"''' doesn't always translate to the '''"printed page'''" too well without proper instructions via style sheets, especially since "screens" are oriented horizontally and most "printed" pages are vertically oriented unless the user shifts to the Portrait view.
http://www.w3.org/TR/CSS2/media.html#media-types <br />
http://www.w3.org/TR/CSS2/page.html

Yoga 13 - On-screen Keyboard Randomly Popping Up When Using Physical Keyboard?

While in laptop mode, and typing on the built-in physical keyboard or a keyboard attached via USB, the on-screen keyboard will randomly pop up, taking away focus (particularly noticeable when using extended desktop on an external display) and eating up half of the screen real estate. As soon as I press the next key on the physical board, the on-screen keyboard minimizes itself. Sometimes it will pop up when I'm not even touching the laptop!
Anyone else experience this and/or know how to stop it? It's the only thing about this machine that drives me absolutely nuts. It seems to be random. I can't pin it down and haven't found any similar reports via Google search.
Thanks in advance.

Disabling "OnScreen Keyboard (Lenovo Transition)" stopped it. The solution is good enough for me, as I don't need the keyboard to pop up on its own anyway. It'll pop up when I tap in a text-entry box, and that's all that matters.
Attempts to calibrate the screen were unsucecssful. I can't say whether or not a screen calibration will stop the random pop-up issue because every time I calibrated the screen, it broke the right-side screen swipe that reveals the Charms Menu. Resetting the screen calibration was the only way I could find to restore the right-side swipe function. This is quite unfortunate because, regardless of the fact that it broke my Charms swipe, my touchpoints were FAR more accurate after the calibration than before.
So now I have another problem. I can't calibrate my screen for optimum accuracy without losing the convenience of the right-side swipe.
Any ideas?

An error message pops up when using text to speech function in trial version

An unable to decode and import the selected wav/mp3 message
pops up when trying to use the text to speech function with the
trial version. It will let me select the voice but will not apply
the changes or convert.
Any suggestions??

Hi there
I've noticed more than few posts about this since Captivate 4
was released.
Are you by chance using Windows Vista 64 bit? Seems most that
have reported this issue have been using that version.
Please report it to Adobe as a bug.
Click
here to view the WishForm/Bug Reporting Form
Cheers... Rick

Audio pops/clicks when using external speakers

Here's the problem -- When my Mac plays a sound and it had not played any sounds for a while, it always pops (or clicks, same thing, just a matter of magnitude). There is no pop if there was sound recently, like in the last 3 minutes or so.
My iMac is an aluminum 20" model purchased in May 2008. I have external speakers playing audio. I don't think the pop happens when it's just the internal speakers.
Is there an audio driver update? The Software Update menu doesn't find anything newer to install for me. The pop is very irritating and I consider this Mac to be broken with respect to audio output.

Finally, a workaround. From another thread I learned that this is an old issue. The Mac shuts off the audio output electronics after some period of inactivity. When it reactivates, an audible pop happens. It's an old issue that Apple for some stupid reason doesn't care to solve. For a company that espouses fluid, integrated user experience, it is incredible that Apple could allow such a glaring audio defect to persist through so many generations of products. Surely they must realize many users will be connecting external amplified speaker systems to the analog audio out port. Doesn't anyone at Apple test the computers against the variety of input loads the audio output circuitry will be interfaced to? I understand that Apple has no control over the variety input impedances and DC biases their audio output electronics will see. But I think the popping could be avoided if they just employed a simpler scheme where the audio electronics do shut off. They are too smart for their own good.
That said, the hack that is so far working for me is this freeware utility KeepSoundAwake that plays an inaudible sound periodically. I would much rather see a solution in the firmware.

Crackling/popping/garbled when using USB audio iPod iOS 6.16

I know several people are having this issue. iPod touch with iOS 6.16, when using the USB cable plugged in to Ford Sync or other stereo head units with USB connectivity, I hear a random popping/crackling/garbled sound. The iPod does this on 2 different vehicles so I know it is not the stereo it self. I have a 2005 Chevy Silverado that I added the IS-GM655 adapter to install a USB and AUX port. Also I have a Ford Van that has the SYNC system in it.
When the iPod is plugged in to the stereo via the USB port, I get random popping or crackling like a CD skipping from the audio. When the iPod is connected via the AUX headphone jack, I don't seem to hear any popping or crackling. I have tried cleaning the port on the bottom of the iPod with rubbing alcohol and it seemed to help a little, but I still noticed the popping/crackling/garbled sound coming from the USB connectivity. Also, Bluetooth and WI-FI are off, I even tried airplane mode and different USB cables, still get same symptoms.
Any fixes for this yet, it appears from all of the other threads I have read and googled, there are SEVERAL other people experiencing this issue and nothing has fixed it??
The only thing I use the iPod for is music, there are no other apps installed on it currently.

Hey Relentless85, Have you tried a "Cline Free" dryer sheet? ! OK, done messing around. It's static electricity, why I have no idea. In my Toyota, I have this issue, The other half's Toyota-- no issue! (go figure) It's always worse in the winter, and only with one adapter. As long as you don't touch the iPod, move it or look at it for to long, your OK. But do any one of the listed activities, you know use the iPod-- it clicks and pops likes a bowl of Rice Crispy's. This helped me, it's going to sound stupid and shouldn't work but it does help. Get yourself a grounding tether, the wrist strap with the wire, the thing you wear when working on computer's, anyway place the strap on your iPod, so it touches the metal back, and the other end attach to some part of your vehicles frame, not to any of the wiring! It shouldn't work but it does for me. The garbled sound, does it it sound like the feedback noise from cassette tapes? (Maybe your not old enough for that...) or over metered sound? A distortion or rumble? Try turning off the EQ feature on your iPod or put it on FLAT, or reduce the volume output level from your iPod to about 80% - 85%. It could be the iPod is sending a frequency that exceeds your car stereo's range, (over metering. On analog tape you did this to boast the bass, but the same practice in digital format causes distortions). About the only other thing to try is Resetting or Restoring, but I don't think it will help in this case. If the tether ground helps, it static, if not-- then you cleared out one thing to check. Hope this helps, Good luck. Cheers.

Blank page is getting displayed in SAPScript when using NEW-PAGE option.

Hello Experts,
We have created a customized SAPScript and in this separate Script is generated based on the currency(WAERS).
So if we have 3 different currencies, then 3 pages will be created with there details, but we are using NEW-PAGE option in
MAIN window to separate the pages and after 3rd page it is displaying 4th page also with footer details.
So how can we avoid last blank page which is getting displayed?

Hi isha.walia ,
This issue can be solved by two ways. Please take the one which suits you better.
Solution 1: If you need to generate separate prints for different currencies.
In the driver program, build an internal table for different currencies which needed to be printed. (Using delete adjacent duplicates, build the internal table with exact number of currencies to be printed). Remove the NEW-PAGE option and call the script/form inside the loop. Do the necessary conditions to manipulate the print.
Advantages of above solution: Better control on spools if needed.
Solution 2: Get the count of the number of pages in a variable. Inside the print loop, increment a flag counter. Check it against the variable which contains the number of pages to be printed at the end of each page. Exit the loop when the number of pages to be printed is reached.
Advantage of above solution: Simple to write the program.
Thanks and Regards
Raghesh R S

Why can't I get a Mac created/iPad edited Pages document to appear in iTunes when using "send to iTunes" command in Pages on my iPad

This morning I updated to iTunes 10.4. and also updated Pages on my MacBook (SL 10.6.8) to version 4.1. My iDevices are all recognized in iTunes and all is going fine except for this one thing. I created a Pages document on my Mac and I sent it to my iPad using file sharing with iTunes. I edited and finished the document on the iPad and then used the "send to iTunes" feature and prepared to sync back to my Mac. The document appears to transfer over - and I have tried sending it over again and again - but it never appears in the file sharing Pages documents window after I sync. When I try to send it from the iPad again, the device tells me that the document already exists and asks if I want to replace it, so it must be transferring somehow but I don't see it in the window.
This only started after I updated both applications. I've been using Pages and file sharing without any issues at all until now. The really ironic thing is that I can create a Word document on my Mac, send it to the iPad, edit it there and send it back to iTunes and it appears in the window like you would expect - but my Pages documents do not. Word documents work fine but not Pages documents? Documents created on the iPad seem to be going back and forth fine but not Mac created files.
I've tried everything I can think of, restarting disconnecting the iPad reconnecting the iPad, hard reset .... Any ideas? Is there something that I am missing? Anybody else experience this?

Just thought I'd add my solution, I decided to go with WebDAV and I think it actually works better than the iTunes way, the steps are pretty much the same but avoiding the iTunes interface just makes things easier and faster.
I followed this guide but it does have a small mistake in the httpd-dav.conf file, on line 2, where it's WebServer/WebDAV">, it should be <Directory "/Library/WebServer/WebDAV">.
The tricky part is setting permissions which if wrong will give you errors when connecting with the iPad, I opted to set all to Read&Write since my home network has a hardware firewall. Another convenience was to add an alias to the webdav share on the Desktop.
I'm still expecting the call from Apple but even if they fix the iTunes I'm sticking with WebDAV, atleast until I see what's new with iOS5 and iCloud this fall which should bring true sync for documents (I'm hoping that they will offer encryption with my own keys, if not, then I'll probably keep using WebDAV).

Fix extra blank page with only header / footer information when using fop?

I found this related topic: http://lists.oasis-open.org/archives/docbook-apps/200407/msg00103.html
but it doesn't tell how it was fixed. Search on google mentions something about this: http://www.oxygenxml.com/pipermail/oxygen-user/2005-August/000549.html
however I don't know anything about xml so I wouldn't know where to add the code assuming it was actually the correct fix.
Using the htmldb_example.xslt file from the technote: Rendering Oracle HTML DB Reports as PDFs Using Formatting Objects Processor
A resolution would be greatly appreciated.

problem resolved; search for and delete this: break-after="page"

Search engine widgets have go daddy "cheep" page and yahoo search come up when using widget not what you type in.

When working with search engine widgets, press enter after making entry and you are sent to "cheepa.com" page brought to you by godaddy. Also seach is by yahoo search. How do you get rid of this page.

Some toolbars will change the usual Firefox search, but they would usually be consistent in steering you to the same site.
Your PC may have contracted some malware. You can supplement your regular security software with these two highly regarded scanners:
Malwarebytes Anti-malware : http://www.malwarebytes.org/mbam.php
SUPERAntiSpyware : http://www.superantispyware.com/
Find anything? Some additional clean-up might be required in Firefox settings as well.

How to avoid security information pop up when using BSP in SRM

Hi. I have created a custom BSP and have flagged it as HTTPS in the properties, and the URL does start HTTPS.
I have then put this BSP in a role in SRM and can access it from the internal ITS after logging into SRM. Obviously the main SRM URL is also HTTPS. The BSP actually does its job fine.
However, when I click on the BSP I get the security information pop up telling me that the page contains both secure and nonsecure items every time.
How can I avoid this?
I have read the article on the wiki, but it does not apply to my BSP as there are no links at all in my BSP, and everything is HTTPS.
We can not change the IE settings as all our desktops are locked down and configured in the same way from an outsource company.
Any help would be greatly appreciated.
Regards,
Dave.

Hi. I'd already seen that, and it is not quite the same as mine. That link is about calling a BSP as a catalog in SRM and switching from HTTPS to HTTP.
I am calling the BSP direct from the SRM main menu and everything of mine is HTTPS, I am not switching.
Do you have any other ideas?
Thanks a lot for your help.
Regards,
Dave.

"Stay on this Page" "Leave this Page" pops up when using SAP URL?

Similar Messages

Maybe you are looking for