Stayed running status after reproses IDOC in Message Nonitoring

Hi,
I reprecessed received IDOC, but it stayed running position.
is it possible ending it?
I restarted MII, but it still running.
Thanks.

Hi,
you can use the Update Message action in a BLT to change the status of a specific message ID. However you should check the NW Logs to see if there is a hint why the processing of the Idoc got stuck.
Michael

Similar Messages

  • I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1

    I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1. Antworten auf Deutsch wären super!

    As far as I know there is no download resource for older Macromedia programs and it is highly unlikely that one as old as version 3 of Fireworks will be able to work on a Windows 8.1 system.  I was unable to get a Studio 8 version installation on a Vista system, and likely even an XP system (cannot remember that far back).

  • On my daughters iPad mini she can not send messages. She can receive them but the send button stays light gray after you type a message. It worked when we first set it up but now it does not. Tried resetting and logging out and back in. With no change.

    I can not send messages on an iPad mini the send button stays light gray and will not send. I can receive. I reset and logged out and back inn with no results. It worked fine when we first set it up. Any suggestions?

    Hello iMessage issues 1234,
    Thank you for the details of the issue your daughter is experiencing with sending messages on the iPad.  It sounds like you might have the Subject Field turned on. To disable this go to Settings > Messages > Show Subject Field.
    iPhone User Guide - Messages settings
    http://help.apple.com/iphone/7/#/iphf2d853e3
    If the Subject Field is not enabled but messages are still not sending, I recommend continuing with the following article:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Error in IDOC processing - Message no. VU 014

    Hi All,
    I got error while processing IDOC manually as:
    " Incompletion: Vendor : Account number of vendor or creditor (VBPA -LIFNR ), error group: 08"
    Details of Error message are as below:
    Message no. VU 014
    Diagnosis: The incompletion check reveals, for analysis purposes, any incomplete documents.
    The message contains:
    1. A description of the incomplete document
    2. A technical entry, telling you which table field has been checked
    3. A the error groups in the transaction from Customizing for Incompletion Log.
    Procedure
    One solution is to deliver the affected document in the screen (Create delivery with reference to order), and to edit and save the delivery following the menu path: Edit -> Incompletion.
    In certain circumstances, you can change Customizing so that
    the checked field is no longer assigned to the error group
    or
    assign another error group to the document type /item category
    or
    permit the delivery as a subsequent function.
    I am confused about what could be the root cause of the error and how to solve it.
    The Important thing is, when IDoc is run in Automatically(batch run), then it is successful with no any error but it gives this error when i run it manually.
    Pl. guide me to solve this problem.
    Thanks,
    Jai.

    Hi Bernd,
    Thank you for your mail.
    The Note 991410 is related to the IDoc status 53. I stucked with the IDoc status 51.
    IDoc error message is in status 51. But still I am looking all other alternative inculding one you suggested.
    Thanks you very much.
    Jai.

  • SQR Process Run Status Error

    Hi All,
    I created an SQR which will update the chartfield1 of the employee when they are non-union employees. After we run the SQR Process, we got an Error on the run status. We check the message log of and got this message :
    "Process Request shows status of 'INITIATED' or 'PROCESSING' but no longer running".
    Any idea on what happened and what can we do to solve it? I read some other thread regarding these message and they say that I need to refresh the database or something. Your input will be of great help.
    Regards

    Hi,
    What Peopletools are you using ?
    Check if the process scheduler is still running.
    Under $PS_HOME/appserv/prcs/domain_name check stderr and stdout files.
    Under $PS_HOME/appserv/prcs/domain_name/LOGS check the logs files.
    Nicolas.

  • IDOC adapter message limitation Status 64

    Hello,
    we have implemented an IDOC R/3->XI->R3 scenario.
    Sometimes it happens, that the sending system generates a hugh number of idocs.
    In this case, the IDOCs are posted to the receiving R/3 system, but stay on status 64 which says,
    "...to few dialog processes...."
    So the receiving SAP system has to few processes to start the processing of the idocs.
    But we can no enhance the amount of the processes.
    Is it possible, to limit the calls of the IDOC adapter
    or to schedule the idocs, or to make a package?
    This should be done on XI!!!!
    I have read the QUEUE option, but we are working on 4.6BASIS, so this did not solve the problem.
    best regards
    Werner

    Werner-
    This situation can be handled using some variations to your suggestion of handling it in XI.
    1) In the Partner profile of the target R3 system, use the option 'trigger by background program' in the inbound parameters. This way, the IDOCs will be created in the database, syntax checked and will be set to status '64' but with a different message (mostly No filters....). At this point, we are not even trying to post the IDOC to the application, which takes the most processing time.
    2) Then in your traget SAP system, schedule program RBDAPP01. There are various options available to restrict your selections. By scheduling this program to run in regular intervals, you can process IDOCs which are in status 64, there by re-processing them if some failed during the last run because of lack of processes.
    Some additional information on performance improvment:
    RBDAPP01 is an interesting program, because it allows you to parallel process the IDOCs plus process them in packets. That is, instead of processing IDOCs one by one, you can make the program to use all the available free processes to process the IDOCs in parallel. This will greatly reduce your processing time.
    If you see, this program has a tab called 'Parallel Proc' (assuming you are logged on in English). You can activate the check box 'Parallel Proc. Active' and choose a 'Server Group'.
    Now, before using this option, you need to understand that this program will occupy all free DIALOG processes. Which means no process will be available for users to log on (even admins) while the program is busy posting IDOCS. However, this limitation can be overcome by fixing a system parameter on the server group which will limit the number of processes to be used by this program. For e.g., in one of my implementations, we set up the profile parameter in such a way that out of 13 dialog processes available, the program will always leave 5 processes free thereby occupying only seven free processes max.
    This setting was done by the basis team and probably you or your basis team already know about it. If not, let me know, I will try to find it out from our guys here.
    Hope the above explaination help. For more information check note 399271 and other related notes for RBDAPP01 PARALLEL PROCESSING.
    KK

  • Can we show information messages after triggring IDOC's in background

    Hi friends,
    Iam executing one custom transaction for sales cycle in background, in that iam trigging IDOC's, user are getting the messages like
    1. Idoc No: 0000014254 despatched to client -
    2. 1Output  were processed.
    3. 1 IDOC's selected.
    user has to enter 3 times while the transaction is running in background.
    But requirement is "can i set all 3 information messages after trigging IDOC's to background.
    any body suggest the solution.
    regards,
    vamsy krishna.

    Nope nope, I don't work for Apple - I'm just a Level 3 Discussions pleb...! ;-))
    I'd been in touch with the senior tiers of Apple Support on the phone to diagnose the chkdsk incidents of 2004-2005.
    Following that, I also negotiated (part-)resolution to the Smart Playlist issue.
    Since Updater 2006-01-10 (part-)fixed the Smart Playlist problem, but seemed to introduce some other issues for folks, I've been continuing to pass feedback from my Level 2 contact who is handling investigation of the latest problems. In turn, he is working with US Engineering to handle this issue.
    So no, I'm not Apple, but I (and some others) pass commentary to and fro between Discussions and Level 2 Support, and by by-passing Front Line phone support, it helps us to get serious issues investigated and resolved more quickly. I find that such an approach for serious problems works well to help the Community.
    I'm not sure if my message gives hope - but I do hope that having reported this on up to Level 2, and having been told that US Engineering have teams watching Discussions, that maybe we can expect some attention from Apple R&D on this matter. However, the official line is for individuals to contact Apple directly themselves via the phone and website feedback, so US Engineering have an idea of the number of people affected. The more people who report to Apple directly, the more likely the problem is to be noticed, and hence the priority for investigation and resolution increases. I can start an unofficial ball rolling, as I have done, but we cannot keep the momentum up unless users use these official routes to let Apple know they are affected.
    Sorry it's all a bit foggy, but it's the best I've got! Hope this little explanation helps to clarify things a bit more. Feel free to post back if you'd like to discuss this further. Best for now.
    Kind regards,
    Gopha.

  • Manage Queues - Messages are in Schedule status after upgrade to ERP2004

    Hi,
    We upgraded SAP to version ERP2004. ABAP proxy XI messages are in schedule status even though we deregister and register & activated all queues.
    When I click on the queues it is in running status.
    Does anyone has any idea where should I look?
    Thanks in advance!
    Mrudula

    Hi,
    my scenario is file to idoc....
    I have set paraemter in SXMB_ADM as below.
    Category                Parameters               CurrentValue        DefaultValue
    RUNTIME                 HTTP_TIMEOUT         100000                      0
    I have gone through as you suggested still when i double click on message in SXMB_MONI...i am getting Runtime Error (TIME_OUT).
    Please do help me..
    Thanks in advance.
    Krish

  • Getting FLBP to run after posting IDOC of type FINSTA01

    Hi experts:
    We are getting an EDI 820 feed from Chase of customer payments. That feed is taken by PI an an IDOC for each payment is created of type FINSTA01. After it processes we need the automatic matching program FLBP to run immediately after the status 53 of the IDOC to clear open invoices.
    1) Is there a segment field I can populate in FINSTA01 to make this happen automatically - I didn' see one.
    2) Is there a user exit where I can set a parameter to force the FLBP to take place at the end? If so, what user exit and what do I need to set?
    3) If not, is there a user exit that occurs after the successful processing (status 53) of the IDOC, where I could call that transaction? I can't find one.
    I really don't want to create a custom IDOC for this to tack that code on the end of the process. My fallback solution is to create a job to run FLBP but I can't tie it to the successful completion of a FINSTA01 IDOC.
    Any ideas would be much appreciated.
    Thanks,
    Scott

    no answer

  • After adding a flashfile .swf into a dreamweaver page and trying to run it, I get an error message related to Javascript

    after adding a flashfile .swf into a dreamweaver page and trying to run it, I get an error message related to Javascript
    I have no trouble viewing other websites with (most likely), flashfiles.
    Here is the the PopUp message:
    "Adobe-warning Adobe Flash PLayer has stopped a potentrially unsafe operation......"

    In newer versions of Flash Pro, you can export to HTML5 Canvas, that's probably what they're talking about: Flash Professional Help | Creating and publishing an HTML5 Canvas document
    .FLV and .SWF are Flash formats that won't show up on iOS (or an ever increasing number of other mobile devices). Mobile Flash was killed by Adobe a couple years ago, so the number of mobile devices that can see it is dwindling rapidly, don't use those formats if you want your viewers on mobile devices to see your content.

  • I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

    I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

    Hi Hardy Tasso,
    Are you seeing this problem since first launch of PSE13 after installation or recently?
    Please try:
    Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
    Thanks,
    Anwesha

  • Often when I try to open Firefox again after closing it, a message pops up saying Firefox is already running (it is not!), so I have to restart my computer.

    Many times when I try to open my Firefox (3.6.11) after closing it, a message pops up saying "Firefox is already running. You must close the porcess or restart your computer before you can open it." Because it is already closed and I have nothing else to close, I close the message and try again, and the same message pops up again... So I have no choice but to restart my computer. (charlie181818@*******.***)

    See this: <br />
    https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

  • Aperture import plug-in won't run.  After examining my library the number of image files stays at "undetermined" and the import button stays greyed out.  Any thoughts?

    Aperture import plug-in won't run.  After examining my library the number of image files stays at "undetermined" and the import button stays greyed out.  Any thoughts?

    Others have the same issue, with the import button being grayed out.  My trail copy expired, but I believe by poking around in the options and selecting another Aperture library and re-selecting, I was able to continue.
    The problem is common enough, that hopefully Adobe will address.  In the mean time, try repairing your Aperture library, checking permissions, exporting a subset of your library for a test, or try putting that library subset on an external drive.  (Can usually avoid permissions issues.)

  • Error while updating the status record of IDOC in SAP

    Hi All,
    I am facing this problem. I have done outbound processing and IDOC was sent successfully from SAP to EDI system and it was processed in EDI and now EDI system wants to send the status back to SAP with a status message and the status number that we are using is '24' and we have mapped all the fields in the status table EDIDS and made sure that EDI system sends all those and I think Counter field can not be determined by EDI system so EDI system used the counter '1' since it can not determine how many counters are already there in SAP and unless we pass the value to this counter field we were getting the error. After passing all the values the status of the IDOC is updated with the status '00' instead of '24' and we do not know why it is happened and I would like to know how SAP converts the status record that is received from the EDI system.
    Please let me know how the status record will be translated into SAP from EDI system and I ahve followed basically EDIDS structure and the IDOC status is updating in SAP but with wrong status number and the alignemnt also missing in SAP fields like if I give some text in the EDI it is splitting and storing in 2 fields.
    Please help me in this and I think I have explained the problem in a detail manner.
    Thanks,
    Ramesh.

    Hi Naresh,
    Thanks for the reply and my question is since EDI system is able to send the status back to SAP from EDI system and only problem is it is updatinf the status wrong and I have checked the EDIDS table also and the entry is creating with another counter and please confirm me that it is because of EDI does not support the status record update so that I can confirm to the client that there is nothing wrong in the way SAP functions and EDI system can not update the status code in the SAP.
    Thanks,
    Ramesh.

  • TS30000020 - IDOC error message

    Hi All,
    In our production system, we had some workflows got stuck up with SWF_RUN 609 error message. So i tried using SWPC
    transcation to resume those workflows. I worked fine. But some did not show up in SWPC and so i used SAP_WAPI_ADM_WORKFLOW_RESUME Fm to resume, it also didnt work. So i searched through sdn and some other sites and found out the standard report   "RSWWERRE - Report for restarting workitems with temporary errors", and tried that. My workflows got resumed. But over 2500 new workflow with TS30000020 and description "EDI: Incorrect status  for inbound IDoc" got triggered without any agents and it went all users. Iam not aware of IDOC.  Can anyone suggest why this has happened and how should i overcome this?
    Regards,
    Kevin.
    Edited by: kevin.jk on Jul 27, 2011 7:54 AM

    Hello,
    RSWWERRE is normally scheduled to run periodically (usually every 20 mins) to handle temporary errors.
    I'm not sure about how these IDOC workflows got started. If they're not necessary then you can logically delete them.
    If you look in the IDOC workflows, when does it sya they started? Recently?
    regards
    Rick Bakker
    hanabi technology

Maybe you are looking for