Staying Signed in for more that 1 minute!!
My problem is staying signed in to my computer for more that 1 minute. If I sign in and do not use my site for a while (more that 1-minute) I get signed out and I have to go through the sign stuff again. My computer will close down al together. How can I stay ssigned in while not using my computer aor a few minutes?????
Did it start not syncing after the iOS 4.2 update?
Similar Messages
-
Monitor any record to stay in queue for more than 5 minutes under AQ ADMIN schema
Hi All,
We need to prepare script which monitor/notify us the record which stays in queue for more than 5 minutes under AQADMIN queue tables. Can someone throw light on this?
Regards,
MDHi Asif,
We need script to monitor if we have "waiting" status in msg_state column of the below table is waiting for more than 5 minutes.
SQL> desc AQ$TBL;
Name Null? Type
QUEUE VARCHAR2(30)
MSG_ID NOT NULL RAW(16)
CORR_ID VARCHAR2(128)
MSG_PRIORITY NUMBER
MSG_STATE VARCHAR2(16)
DELAY DATE
DELAY_TIMESTAMP TIMESTAMP(6)
EXPIRATION NUMBER
ENQ_TIME DATE
ENQ_TIMESTAMP TIMESTAMP(6)
ENQ_USER_ID VARCHAR2(30)
ENQ_TXN_ID VARCHAR2(30)
DEQ_TIME DATE
DEQ_TIMESTAMP TIMESTAMP(9)
DEQ_USER_ID VARCHAR2(30)
DEQ_TXN_ID VARCHAR2(30)
RETRY_COUNT NUMBER
EXCEPTION_QUEUE_OWNER VARCHAR2(30)
EXCEPTION_QUEUE VARCHAR2(30)
USER_DATA TEST1
PROPAGATED_MSGID RAW(16)
SENDER_NAME VARCHAR2(30)
SENDER_ADDRESS VARCHAR2(1024)
SENDER_PROTOCOL NUMBER
ORIGINAL_MSGID RAW(16)
ORIGINAL_QUEUE_NAME VARCHAR2(30)
ORIGINAL_QUEUE_OWNER VARCHAR2(30)
EXPIRATION_REASON VARCHAR2(31)
CONSUMER_NAME VARCHAR2(30)
ADDRESS VARCHAR2(1024)
PROTOCOL NUMBER
Regards,
MD -
Hi all, I have elements 10 and the darn organizer will not stay open for more than a minute, which makes useing the program a pain in the butt. does anyone else have this problem and how did you fix it. Im running XP on an older machine in which the edit part works fine.HELP
Hold down your Shift key while launching the Organizer to get to the Catalog Manager. Highlight your catalog at the bottom of the window, and choose "Repair". Repeat, using "Optimize".
If that doesn't solve it, from the Catalog Manager, create a new catalog (with a different name).
Ken -
how do i activate my 6? I followed the instructions and it said my activation failed...now on hold for 2 different times. been screwing with this for 3 hours.
I highly doubt that the VZW CS reps are sitting by idly letting people stew on hold. I'm sure there are loads of people just like us that have questions, but they don't know how to get online and figure things out. Yes, people like this have iPhones. My point is, I wouldn't blame this on Verizon's Customer Service. If you're truly frustrated, take the suggestion given and try it.
-
Every time my lg g pad 8.3 lte tablet is turned off it reverts the saving email attachment back to internal storage. Every time I turn on, I change it back to save to SD card. It stays that way until it is turned off for more than a minute. If I do a restart, it holds the setting, but loses it when it is shut down for any period of time. Does anyone else have this issue? The setting holds for photos taken with camera storing to SD card. Only the email attachment setting does not hold.
I believe that system has a hall sensor on it to detect when the lid is closed so it can put the system to sleep and/or disable the monitor so it can be used with an external monitor only. If the sensor is marginal or has a bad cable, it may intermittently cut the monitor on and off, and may likewise put the system to sleep. One way to check would be to plug in an external monitor and if the laptop's screen cuts off or doesn't show up, start using the trackpad and press on a non-typing key like the shift key. If the external display suddenly pops and becomes active while the laptop display remains black, it's probably a problem with the sensor or the cable/connection. You might be able to fool the sensor into kicking on and off by moving a magnet over it. It's located on the left had side of the base with the unit opened up, and right over the audio output plug.
I know of some people that put a small magnet right over the hall sensor's location so the laptop display turns off and they use the system with an external monitor, keyboard, and mouse. If fooling with magnets, make sure they're small and don't get them close to the hard drive because a strong magnet can wipe them out.
I don't know if this will help you much, but it might. -
My iphoto quites unexpectedly everytime I open it and says closes while using the eOkaoFr.dylib plugin. Does anyone know how to fix this? iphoto won't stay open for more than 1 minute at a time. Help anyone?
Is there a crash log? If so post the first 100 or so lines o fit
Do you know what the ofending plugin is? and where it came from?
LN -
My Iphone 5 keeps restarting over and over. it wont stay on for more than a minute. how do I fix this?
Contact Apple Support or an Apple Store if you have one near you. Your battery needs to run through the diagnostic test. You can also try to put the device into Recovery mode as well and rsetore the iOS software, and set up the device as new. Follow this article on Recovery Mode:
http://support.apple.com/kb/ht1808 -
IOS4 in 3GS hanging for more than 2 minutes!
My iPhone 3GS is hanging after I press END before, during and afters calls. This never happened in 3.1.3!
Sometimes it stays like that for more than 2 minutes, than it shows the unable to complete call message.
It looks like it is losing the carrier signal and tries to reconnect.
Any ideas to avoid this?
Alexandre.Have you tried restoring the iPhone or hard resetting it by holding the Home and Hold button until it switches off?
-
WSP deployment showng as deploying for more than 30 minutes.
WSP deployment showng as deploying for more than 30 minutes.
Hi,
I have an wsp , where i tested deploying in my test environment, But when i try deploying same wsp deployment in Production. Its showing as
deploying for more than 30 mins.
BadriThis is most likely due to the timer service being turned off or failing for a machine. When deploying a WSP, it will schedule a job on ALL servers in the farm with the web application service turned on. It will stay on deploying if one of the servers is
in bad health.
1. Use CA to see on which server it is failing.
2. Cancel the deployment like described here:
http://ybbest.wordpress.com/2011/09/10/how-to-fix-%E2%80%9Ca-deployment-or-retraction-is-already-under-way-for-the-solution-%E2%80%9C-wsp%E2%80%9D-and-only-one-deployment-or-retraction-at-a-time-is-supported%E2%80%9D/
3. fix the server and/or timer service somehow.
4. you can deploy with PowerShell and the -Local switch like described here:
http://technet.microsoft.com/en-us/library/ff607534.aspx do it on all servers, that way you will either succeed it or see the problem.
Hope that helps!
Independant SharePoint Consultant. Feel free to contact me. Blog:
http://www.sharepoint.bg/radi Twitter:
@RadiAtanassov -
My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seconds back but often the person on the other end has hung up ... I can not stand it anymore, someone suggests something?
Besides these problems, there is the battery, which was bad got worse, she is not lasting more than 10 hours, even without using the phone.
Sometimes it even seems that the problem was solved, but my joy did not last long after I celebrate all the problems return, is incredible ...
thanks.
Sorry my bad Inglês.Try a reset hold home/sleep buttons until Apple logo appears
If that does not improve try a restore
http://support.apple.com/kb/HT4137
For your information
We are NOT Apple here we are all users helping other users
so emotion is ignored -
my ipod touch 4g becomes very hot when play games or surf the web for more than 30 minutes. does any body know why?
Maybe the solution is that you iPod is slow is because you are not closing your apps after you use them. To do this you must:
1. Press the Home Button to get out of that app
2. You will return to the Home Screen
3. Click the Home Button twice, (do this quite fast, But not TOO fast)
4. A bar with all your apps that you have come out of will be on the bottom of the screen
5. Hold down one of those apps
6. They will start to "jiggle"
7. A little red circle will be beside all of the "jiggling" apps
8. Press that little red circle and those apps will close (NOTE: This is NOT deleting your apps)
9. Now you apps are closed NOT deleted
10. Your iPod will now speed up in: Browsing, downloading, syncing and much more
11. (Bonus) - To DELETE an application do the same thing ( But not clicking the Home Button twice) and all of your apps which you downloaded will "jiggle" and there will be an black circle with an X in it, click that X to DELETE that app and a dialog will pop up and say: "Do you really want to delete this app?" If you want to: Click yes.
And that is how to speed up your iPod
Bonus) - is how to DELETE an App
Thank You,
Apple 5 -
Wireless connection lost after macbook pro sleeps for more than 15 minutes
It's annoying. I have a brand new macbookpro 3.06Ghz 17" hi-res screen running OS-X 10.6.3 and the wireless connection keeps dropping after the computer is either turned off or sleeping for more than 15 minutes.
My router is a linksys wireless G, has dd-wrt software in it which is very powerful. When I release or renew the DHCP at the router, the mackbook connects to the wireless network, no problem.
What configuration can be done at the macbook as to not have it time-out airport wireless connections unless I renew/release DHCP at the router? This is an annoyance beyond the limits of anyone's patience.... Thanks in advance for any help!Well, since nobody answered this post I decided to try a bunch of things and I believe I came to a solution:
1 - Make airport the first connection under System Preferences->Network
2 - In the advanced window:
- Under AirPort: Keep only one network name on the list (the one you use all the time)
- Select 'remember networks this computer has joined' and deselect all other boxes
- Take note of the Airport ID (xx:xx:xx:xx:xx) and put it in your router's MAC address list. I do this because I only allow connections to my router from mac IDs that are on the list I create. In my case, I have my macbook pro and my PS3 system. If you don't know how to edit the MAC list in your router, do some research. It's pretty easy.
- Under TCP/IP: Select "Using DHCP" on the IPv4 drop box
- Select "Off" for IPV6 drop box
- Under DNS, after you connect at least once, you should see (grayed out) your router's IP address on the left box and the domain on the right side box.
Finally, under "Ethernet" you should see your Mac address there, the configure option should be set to Automatically and MTU as standard (1500).
Press OK and then press "Apply" and lock that screen by clicking on the padlock at the bottom left. BTW on the top of this screen Location should be "Automatic" - if not, select it and apply.
Done! Your wireless should connect quickly after the computer is turned on or waken up from sleep state. This assumes you configured your router correctly (mac addresses, frequencies, etc).
Good Luck to all who try this - at least I have not have any more dropped wireless connections.
Message was edited by: KEForex
Message was edited by: KEForex -
Icons keep disappearing off the monitor when computer sleeps for more than 10 minutes
My new HP Pavilion I5-2300 keeps locking up when the computer rests for more than 10 minutes. When i go to wake up the computer the desktop background comes up on the monitor, but all of my icons are missing and no command prompts work from the keyboard. I have just been unplugging and then replugging the monitor from the power source and that seems to reboot the freeze, but i really don't want to have to do this every time it happens. Anybody experience anything similar? Am i missing an easy solution here? Thanks
Hi,
As you can see from the theory this alert could mean two things:
1. Too many powershell scripts are executed on agent simultaneously
2. There are scripts that takes much time to complete
First of all, you need to evaluate a script-based module (workflow). You need to find answers to following questions:
– What is the target for this script-based workflow?
– How many instances of this target class are exist on the affected computer?
– Does this script leveraging a cookdown concept?
– How long it take for script to complete?
Please go through the articles below for more details:
http://www.systemcentercentral.com/research-this-kb-power-shell-script-was-dropped/
In addition, here is a similar thread for your reference:
Threshold for SCOM 2012
https://social.technet.microsoft.com/Forums/systemcenter/en-US/00dc16c4-9858-459a-8c65-7d73ac8cc997/threshold-for-scom-2012
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Why does it take so long to convert my PDF to word.docx? It has been going for more than 30 minutes.
There could be several reasons. It may be that Acrobat spent that time trying and ran into too many bottlenecks. As a test you might print the PDF to a new PDF and try the conversion on the new PDF. It might be there is a problem with the original PDF that the print process would fix..
-
Hi I just try to update my iphone 5 to 7.1.2 and the bar update is freeze for more of 45 minutes? At between 1/4 to 1/3 of the screen! What is ur sugestion to fix that? force to close?
Ok I find my solution on one other website....
Maybe you are looking for
-
I read that print access is only possible via IP address rather than name when connected on vpn. Appreciate if anyone can help me understand why is it so. Thanks in advance
-
Copy/Paste gradient becomes a blend?
If I copy/paste a gradient filled object between two Illustrator CS6 documents, the gradient becomes a blend. This doesn't happen however if just drag the object from one open document to another. Is there a way to correct this copy/paste behaviour?
-
Hi, I'm not sure if I'm in the correct thread/category but here's my issue. I need to check the integrity of some .dll files in all of our Windows Servers and the checking is base on their specific hash keys. A sample of a file is linkinfo.dll I trie
-
when i search a album and lets say theres 24 songs.. it only shows like 12-17 of them. how do i see the rest. imac user
-
Após atualizar meu iPhone 4 ele apresentou o error -1 no itunes. Alguem sabe resolver? O que devo fazer? After updating my iPhone 4 he presented the error -1 in itunes. Someone knows how to solve? What should I do? Obrigado!