Stck in Transit (back date)

Dear SAP Gurus
How to view the stock in transit on back date?
Regards

Thank You veru much Raju
But the Stock in transit is also showing as zero at thae period end.
Instead I found out from MB51 that Movement type :
603  (TF replenishment del) is not giving consistent results, when I opened material document inside it shows movement type  as 641 and few times as 603.
Where exactly may be the problem.
Or it be some problem with the configuration.
CAn u help
regards

Similar Messages

  • G/L Cleared document in back date which table i found?

    I have posted a G/L Document on 01/02/2014 and cleared the same document on 10/03/2014. The g/l open Items are stored in BSIS Table and Cleared items are stored in BSAS Table. Now i want see the value in table level on 10/02/2014 (Back date) in which table i found the values.

    HI Satheesh,
    You can get these values in BSEG table and FAGLFLEXT table for line items details. BKPF for header details.
    Thanks & Regards
    Ravinder Kumar

  • Action with back date

    Dear friends
    Transfer action is performed on a date, after performing the transfer action, with the back date  employee got the promotion and again promotion action is performed.
    Then from the date of promotion to transfer date, emp group and sub group are showing correctly, but from the date of transfer the emp group and sub group showing the old values.
    For example:
    Employee group and sub group are 1 and a1 respectively.
    Transfer action is performed on 1.4. 2011.
    Now after performing this transfer action, say for example with the back date, promotion action is performed say from 1.6. 2010. employeeu2019s emp group and sub group changed to 2 and a2.
    Now the data  in IT 1, the record shows as emp goup and sub goup as 2 and a2 corrctly from 1.6. 2010
    But from the record from 1.4. 2011, instead of showing the emp group and sub goups as 2 and a2 sys showing the values as 1 and a1.
    Regards
    Kiran

    Dear friends
    Transfer action is performed on a date, after performing the transfer action, with the back date employee got the promotion and again promotion action is performed.
    Then from the date of promotion to transfer date, emp group and sub group are showing correctly, but from the date of transfer the emp group and sub group showing the old values.
    For example:
    Employee group and sub group are 1 and a1 respectively.
    Transfer action is performed on 1.4. 2011.
    Now after performing this transfer action, say for example with the back date, promotion action is performed say from 1.6. 2010. employeeu2019s emp group and sub group changed to 2 and a2.
    Now the data in IT 1, the record shows as emp goup and sub goup as 2 and a2 corrctly from 1.6. 2010
    But from the record from 1.4. 2011, instead of showing the emp group and sub goups as 2 and a2 sys showing the values as 1 and a1.
    Regards
    Kiran

  • Report for shedule vs supply and report for opening stock at back date.

    Dear All Guru,
    please can anybody reply me is there any standard report is available for
    1) Report for shedule vs supply
    2) and report for opening stock at back date.(ex- opening stock at last month 16th july or two months back on 10th may
    pl suggest if any standard report is available or how we can data for this
    Regards,
    Vimlesh

    Hi,
    To see the opening stock at a particular date use T.Code: MB5B,
    To see the scheduled quantity & delivered quantity use table EKET with the filed names MENGE & WEMNG.
    Regards,
    Prabu

  • Issues with Writing back data to Planning Cube After adding a new characterstic

    Hello,
    We have two cubes and a MP on top of it. ( Reporting Cube and Planning Cube ). An aggregation layer has also been built and so does a planning BEx query on top of it.
    Before Scenario: things were working fine as we were able to write back data to planning cube using the BEx.
    After Scenario: We created a new Dimension in the planning cube and added a new characteristic ( lets call it ZX_KEY ) . This Characteristic holds the concatenated values of some of the other characteristics in its master data tables . ( For ex: Account_Customer ID_Country-code_Industry-code ).
    This new characteristic is also present in the reporting cube and has been added and transferred to MP.
    This new characterstic was added to the planning BEx query as one of the rows and we executed it the analyzer. After entering the required values for all characterstics ( including the newly added ZX_KEY ) and the key figure values, we tried saving it. Now this is where the Analyzer is throwing up this error..
    ~~Characterstic combination cannot be assigned to part provider ~~
    ~~Characterstic 'ZX_KEY'; Characterstic value 'R123000000_12_US_TX'~~
    ~~ Entered values are incorrect:Correct before navigation ~~
    The value that we are entering ( R123000000_12_US_TX ) is picked up from the master data table of ZX_KEY by double clicking and selecting it from the fetched values. So i am not sure as to why its throwing up the above error. Request your help on this please.
    regards,
    Karthik

    Hi,
    Try to check that all characteristics are correctly assigned at multiprovider level.
    hope it helps

  • Back Date Storage location Stock / Subcontractor Stock

    Dear SAP Guru (s)
    Please confirm can we get back date stock at storage location with value and quantity. Also tell me how can we take one subcontractor stock at any particular date.
    We are using MB5B, but it is giving only quantity at storage location level and value at plant level.
    Full points if problem solved.
    Regards
    Ishu

    Execute MB5B with special stock and O for special stock indicator, and then double click the material number, you can get all the material document NO.

  • Posting on back date

    hi
    I am having zero stock on 13.11.2008. I did  MIGO(101) date is 13.11.2008. My system allowing me to issue material on 5.11.2008. So that my stock came in negative. i am not getting any error if i am posting in back date in same period when there was no stock. Can i know which msg nor should i have to activate or any other way to me that user will get error while posting in back date?
    Thank you
    Sameer

    hi
    plz check u might activated OMJ1 - Allowing Negative Stocks. 
    http://www.sap-basis-abap.com/mm/how-to-use-negative-stocks-and-its-purpose.htm
    regards
    kunal

  • Create Delivery, Billing and Excise Invoice no. in back date.

    Dear all,
    i got sum problem with no. range in export excise invoicing,
    therefore to avoid this i created export invoice thru' legacy system, now i want to create the same export order in sap system
    how i create export order in back date as actual excise date lies in back date.
    what certain changes i have to made in sap system in order to create Delivery, Billing and Excise Invoice no. in back date.
    Plz suggest
    Gaurav

    Back date means how many months should be predated ?? You should be aware, you can post a document in SAP one month prior to current month but not before that. For example, now we are in August and you can post a document for July and not for June'10.
    Apart from this, you need to have back dated stock in SAP to invoice and the periods (MM & FI) should be open for previous month.
    Dear Sir,
    Back dates means 14 days back and in the same month August.
    plz , explain what is back dated stock to invoice SAP
    Gaurav

  • Not to allow to save the billing document in the back date if FI period clo

    Can anybody help me please. My FI period for october is closed. But there are still some open delivery documents in billing due list for October. So now let say on 7th december if i will make the billing documents by giving the date 30.11.2007 logically as FI period is closed it will allow to save the billing document but will not pass to accounting.
    So this normaly happening in my industry endusers are creating the billing documents in the back date even after the period close so all the documents come into VFX3.
    So can any body help me? Can we have any check if the FI period is closed for a perticular months if we will try to make the billing documents in the closed period it will not allow to generate the billing document rather saving the documents and blocking for accounting.
    Reggards.
    Laxmikanta Das.
    09958119889.

    Dear laxmikanta
    I also not come across the situation what you said and hence dont have much idea about authorization group.
    However, on going through the F1 help, it says
    <b>Procedure</b>
        If only a limited set of users is to be able to post in a particular
        posting period, proceed as follows:
                 o   Add the posting period authorization (authorization object
            F_BKPF_BUP) to the authorizations of the selected users. Assign an
            authorization group (e.g. '0001').
                  o   Enter the account type '+' for the posting period variant to which
            the restriction is to apply. Enter the period(s) whose use is to be
            restricted in the first period, those which are available to all
            users in the second period, and the authorization group (e.g.
            '0001') in the last column.
    <b>Examples</b>
        A posting period can be successively restricted. If, e.g. 10 users have
        the posting period authorization with authorization group '0001', and 3
        of these 10 users also with authorization group '0002'.
        If the period is only to be accessible to the 10 selected users the
        authorization group '0001' is entered in the posting period variant.
        Access can later be restricted to the remaining 3 users by entering
        '0002'.
    From the above, I feel your requirement can be met.
    Thanks
    G. Lakshmipathi

  • MIGO Goods receipt accepted in back date for STO

    Hi,
    I have a S.T.O for which delivery have been created, post goods issue and excise invoice have been done on 05.09.2009 and receipt through MIGO have been done and system accepted to post the material document in back dated 07.08.2009.
    How can system accept to post the material document in the back date, even my delivery and even dispatches had been not done on 07.08.2009.
    Is this standard functionality or do i need to make any config settings to not to accept to post the MIGO document.
    Thanks in advance
    Kishore.

    Go to transaction MMRV and uncheck field "Allow posting to previous period". This will make sure MM posting cannot be done to any of the previous periods. Keep in mind the setting will only be applicable for a particular month. If you want to make sure the setting is permanently set, you want to go to OMSY and uncheck the column to allow posting to previous period.
    Revi

  • Goods Receipt in Back date

    Hello,
    We have  closed the May month and started a running the business in SAP. But user saying  he wants to show the GR created in 01.01.2011 (Jan month) already closed that month.
    He is forcing us,  it is possible to create on back dated, make it back date and allow him to do the GR ... As per SAP system only allow for one month back to do the GR.... If suppose i did the GR for January month then,, what are the implications hit after the GR .... and is it feasible to do the GR in back dated.
    Regards
    sapman man

    Theoretically you could reopen an old period with MMPI, but  you may screw up the information from thousands of postings just to fix one. MMPI is usually used if someone closed a period accidently in the middle of the month, but not recommended to fix just one posting.
    search the forum for MMPI , search OSS on MMPI  and read all the warnings

  • How to get one day back data from selecting date .

    Hi Experts,
                   Iam using DB2 database .How to see one day back of selected date . i tried by using prompts .
    Date=(@prompt('Mssg','D',,mono,free)-1 days)   Date is a date object and i applied prompt for date . butting i'm facing error . so kindly help me to over come this issue .
    Regards
    Dinesh

    first capture Date on univers by simply using your formula
    Date=(@prompt('Mssg','D',,mono,free))
    Now to get the previous date i.e 1 day back date
    create another variable called
    back_Date = (Date - 1 Day)
    Thanks,
    Swapnil

  • Error in Back date delivery

    Hi All,
    I want to create one Order in Back date with back date delivery(Picking + PGI) and Billing, i m able to create the Order& Billing  in Back date but when i enter the back delivery date in sales order it will create current date's schedule line for the material which i don't want. if i create it in current date then after the process its shows same item in two date with 0 and deliver quantity in VA05 Report. actually i want to create entire process in back date what should i do please help.
    Regards
    Vivek Sharma

    SAP will not confirm availability in the past. That makes sense.
    Maybe you should just:
    - Proceed without taking the dates in account
    - Manually change the invoice date to a past date for this specific delivery
    Anyway, if the FI period is closed, you will not be able to book the invoice in the past.

  • No GR on Back date (Document Date)

    Hi All,
    We normally use Tx: MB01 and MB0A for Goods Reciept.
    Now we have a requirement not to allow GR on back date (i.e. Document date in GR screen should not be back dated) but it should be allowed in Goods Issue (MB1A).
    I have tried by using the screen control for Goods movement; I made the field 'Document date' in display mode but it is getting in display mode in all Tx: MB01,MB0A & MB1A,MB1C.
    How to achieve this "Not to allow GR on back date only in GR transactions"
    any possibility of Message control / Screen variants / any other thing ??
    Please suggest.
    kind regards,
    kumar

    Hi,
    You should be able to control this on posting periods unless you do not generally open back dated periods (Not recommended in normal practise).
    You could try putting the latest possible GR date in purchase order as the cut off date you want to post the document. System will not allow you to post document in case date is previous to the date maintained in this field.
    Thanks,
    Sourabh

  • 30 days back data from selected date

    Hi Gurus,
    I have date prompt in a format (02/01/1998(MM/DD/YYYY)12:00:00 AM) and I have report with 4 columns in the 1st column date 2ed column sales 3ed column 30 days back date 4th column 30 days back sales.
    Date | Sales | 30 days Back date(from the selected) | 30 days back Sales
    How i have to take the days from the above format and make that to 30 days back can any one suggest me how to implement this.
    Thanks,
    Rafi

    Hi Svee ,
    I added timestampadd(SQL_TSI_DAY, -30,Date) formula in the Fx of 30 days back column and it is showing 30 days back date but it is not showing 30 days back Sales it is showing same sales for both date columns.
    Thanks,
    Rafi
    Edited by: Rafi.B on Aug 20, 2012 11:48 AM

Maybe you are looking for

  • Help installing Tiger 10.4 on Powerbook G4 12"

    Hello, I have a Powerbook G4 12" with the following specs: CPU Speed: 1.33 GHz L2 Cache (per CPU): 512 KB Memory: 1.25 GB Bus Speed: 167 MHz I am currently running OS X 10.3 and I am trying to install OS X 10.4. I have a retail DVD version (black wit

  • InDesign won't load

    Have recently purchased Adobe Creative Suite 6 (student version) Have recieved activation serial number from Adobe, have downloaded the programs to my apple mac via adobe CD using apple UBS Superdrive. I can see all the programs on my computer but on

  • Data source 0PU_IS-PS_43 could not load delta updata

    In BW3.5, I install the Business Content of data source 0PU_IS-PS_43 to load the Budget Line Items in SAP system. Delta updata is support by data source 0PU_IS-PS_43. First, I did the Initial load in BW system, then I can see the delta queue in SAP s

  • Can we change GATHER_STATS_PROG (auto gather stat job) behavior

    Hi All, Is anyway we can change default oracle auto gather job ? We know that oracle gather job (GATHER_STATS_JOB, below 11g) will trigger base on the Maintenance Window, we have few huge Production environment. We're thinking to gather application s

  • Request for tutorials for Edge templates

    Having access to the antmpl files is good, but it would be extremely helpful if there were tutorials  to go with them. For instance i would like to modify the navigation on this template to auto play, rather than wait for a click http://html.adobe.co