Std Extractor for table EQKT

Can someone help me in finding the sap std extractor for the table EQKT (Equipment short texts table). I need to extract the info from the field EQKTU.
-Tagz

Krishna,
To the best of my knowledge there is no standard delivered extractor for table EQBS. Try and understand the functionality of the data stored in the table and its relationships to what is specified in requirement. Is the field required in the master data of equipment or some other transaction data? Depending on the scenario you may have to enhance the master data / transaction data extractor or may be if situation warrants you may have to create a generic extractor.
General procedure employed in finding extractors is to know what type of data is requested, which functional area then check the standard extractors in that specific application component to see if any of the extractors delivered provide the data required. Check help documentation of the extractors.

Similar Messages

  • Extractor for table COBRB

    Hello Experts,
    I am looking for a BC-extractor for table COBRB containingt hese fields:
    OBJNR, BUREG, LFDNR, PERBZ, URZUO, GABJA, GABPE, GBISJ, GBISP, PROZS, AVORG, KONTY, KOKRS, BUKRS, HKONT, NLN1, ANLN2, MATNR, REC_OBJNR1.
    Any idea?
    We need the relation between COORDER and the valid HKONT for a certain moment.
    As it is possible to have more than 1 HKONT (with different percentages and in time) I guess it is a different extractor than 0COORDER_ATTR and it can not just added to this ectractor.
    Thanks in advance,
    Udo

    Hi,
    Enter your table name in SE11 in ECC.
    Click Where-Used-List
    Select Structures, Programs etc., then it will show the entire info.
    Regards,
    Suman

  • Extractor for Table BKPF

    Hi ,
      I wanted to know the extractor for table BKPF . Where can i know or which is the extratcor
    Regards
    Ankit Vaish

    Hi,
    I hope, The datasource 0FI_GL_4 would be useful to you.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8b/02f93abb013b0de10000000a114084/frameset.htm
    With rgds,
    Anil Kumar Sharma .P

  • Extractor for table S115

    Hi,
    Im looking for a standar extractor that can obtain the information that i have in the table s115 of R/3; or its necessary to create an extractor generic?
    Thanks for the information
    Mónica

    Hi
    just create a generic extractor for this table.
    http://help.sap.com/saphelp_nw04/helpdata/en/37/4f3ca8b672a34082ab3085d3c22145/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
    Reg's
    Edan

  • Extractor for table NAST

    Hi Folks,
    I have a requirement to determine the number of PO's that are transmitted electronically (either FAX or EDI).
    I know I use table NAST and Field KAPPL to determine a message type.
    Does anyone know if there is a standard BC extractor for this NAST table?
    Any advise is appreciated.
    Regards,
    David

    Hi,
    I hope, The datasource 0FI_GL_4 would be useful to you.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8b/02f93abb013b0de10000000a114084/frameset.htm
    With rgds,
    Anil Kumar Sharma .P

  • Extractor for table PA2001

    hello all,
    I am new to HR extraction.I need to pull the data of table PA2001 for absentism.
    I seached all the extractors of std business content related to HR but i was not able to find it.
    Any suggestions would be greatly appreciable.
    Thanks in advance.
    regards,
    Yogesh

    See these links for mapping!
    0HR_PT_1
    http://help.sap.com/saphelp_bw30b/helpdata/en/0a/5266371849d666e10000009b38f8cf/frameset.htm
    0HR_PT_2
    http://help.sap.com/saphelp_bw30b/helpdata/en/56/3b6637bd367465e10000009b38f8cf/frameset.htm
    http://help.sap.com/saphelp_bw30b/helpdata/en/4b/26c5394dbfef35e10000000a11402f/frameset.htm
    0HR_PT_3
    http://help.sap.com/saphelp_bw30b/helpdata/en/d0/4566377c436c66e10000009b38f8cf/frameset.htm
    TIME MANAGEMENT (general)
    http://help.sap.com/saphelp_bw30b/helpdata/en/25/491d3c55a0f503e10000000a114084/frameset.htm

  • BI Content extractor for table LFB1?

    HI folks,
    I'd happy to know if there is any BI content extractor which is able to extract the LFB1 table contents to BW.
    I know there is 0VENDOR_ATTR but it only seems to deal with the "standard" vendor data (like is in table LFA1).
    In fact, we are especially looking for the field ALTKN which is stored in the LFB1 table.
    Best regards,
    bivision

    Hi,
    If the field is not there in that datasource try to  enhance to the datasource.

  • Extractor for tbl CABN

    Hi ,
    Could someone tell me the std extractor for table CABN or how to find the extractor for the table.
    Thanks
    Jay.

    Hi dear,
    look at 0CRM_MKTATTR_ATTR
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8d/4cb2188716e8428c84bef5140d19d1/content.htm
    Hope it helps!
    Bye,
    Roberto

  • Extractor for ANIA and/or ANKB

    Hello Everyone,
    I would like to know if there is any SAP delivered BI Content extractor for table ANIA and/or table ANKB.
    I've searched everywhere but with no success.
    Does anyone have any idea?
    Regards,
    Diogo.

    ANIA has no standard DataSource.
    ANIB has no standard DataSource.
    I know that currently it is not planned to enhance these standard extraction
    functions to integrate simulated WBS element depreciation.
    ANKA has no standard DataSource.
    ANKB has no standard DataSource.
    0FI_AA_005 only takes transactions with entries in ANEK and ANEP.
    0FI_AA_006 extracts those transactions which are stored in ANEK, ANEP
    and ANEA.
    ANLV, ANLK have no standard DataSources.
    You will need to create your own generic DataSources, in order to
    extract the datas from the tables that have no standard
    DataSources.
    Colin

  • Record Mode in SRM Std Extractor.

    Hi All,
    In the SRM std extractor for POs we are having an issue. The POs which are deleted in SRM are supposed to be deleted in BW DSO as well. But this doesn't always happens for POs with limit Line items. Rest all the records are deleted and one Limit Item remains as the record mode for the rest of the records come as 'D' and for Limit Item is blank. It is an AIMD extractor. If anyone has faced the issue please let us know how this was solved.
    Alternatively Is there any way to find how record mode is populated in a standard extractor. Please let us know.
    Thanks In Advance,
    Aparna

    Hi Aparna:
        Could you please provide more details? For example:
    - Which is the DataSource you're working with?
    - Are you loading data to a Standard DSO? Which one?
    - What are the InfoObjects included in the "Key fields" of your DSO?
    Regards,
    Francisco Milán.

  • Extractor for AUFK and AFKO tables

    Hello Experts,
    I am looking for a standard extractor for the tables AUFK (Order Master data) and AFKO (Order Header). I wanted to know if there a exists a standard extractor for the same or I have to create a generic one.
    Thanks,
    Rishi

    For internal orders (ie aufk) have a look at 0COORDER and the transaction data  0CO_OM_OP*
    and the rest of the content for IOs
    http://help.sap.com/saphelp_nw70/helpdata/en/f2/db0c3c99d56448e10000000a114084/frameset.htm

  • Extractor for FLEET table

    I need to extract some fields from the table FLEET, does any of you know if there's already a standard extractor for that?
    Otherwise I may need to enhance an existing one or create my own. If so, can you suggest any ideas about how to link the data?
    If I have to enhance, I was thinking about using 2LIS_08TRFKZ and add the missing fields there. Is this the right approach?

    HI,
    Enter this table name in SE11 ->Display->Where-Used-List->Select Stuctures, Includes, Programs etc...
    Get into ROOSOURCE table, Select A in OBJVERS, Extraction details etc..You will come to know about any Standard Extractor.
    I have no idea about your second question.
    Regards,
    Suman

  • Extractor for Purchasing Conditions for tables EKKO, EKPO and KONV

    Hi Experts,
    I want to know if there is an Extractor for Purchasing Conditions with fields in tables of Origin: EKKO, EKPO and KONV.
    Or, at least an extractor with the table KONV.
    Or, how I can look for it.
    Any feedback, will be really apreciated.
    Thanks in advance

    Hi David,
    Adding to what said above.
    Observe the Fileds in the Datasources and the details.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/5c/8ea0e626e442efb109232830faded9/frameset.htm
    Regards,
    Ram.

  • Extractor for Product Group/Member Allocation- hierarchy (table u2013 PGMI ).

    Hello experts
    I am looking for standard extractor for Product Group/Member
    Allocation- hierarchy (table u2013 PGMI on the ECC).
    Is there a standard extractor for product group-hierarchy?
    Best Regards,
    Tal Shalom.

    Hi Lory,
    I thought the document contained an explanation of remote key mapping. Obviously it doesn't, sorry.
    Setting up remote key mapping is a bit complicated.
    First of all go to the MDM console and check your product category field in the main table (catalog items). Is key mapping set to "yes"?
    then go to the data manager and switch to the table containing the product categories in record mode. Right click on any entry and check the remote key data. Are remote keys available for your product categories. I assume that there are no remote keys available - this is the reason the system behaves as you describe it.
    Setting up remote keys for existing product categories AFAIK can only be done manually in Data Manager. Alternatively you can delete your hierarchy and create it once more, creating remote keys for every entry in the table. You can chose any remote system, it just has to be the same all the time.
    In import manager you have to clode the code field of your product category (basically the material group number) and assign it once to the product category in MDM and once to the remote key.
    Be sure to check your configuration in MDM Import Manager, the entry "Do not update record matching field value" needs to be set to no. Otherwise no remote keys are created.
    Now you can import your categories creating your hierarchy, as usual. The remote keys are created automatically.
    You should assign remote keys to all fields that should be matched in a similar way, UOM, currency etc.
    Hope you could follow this brief version.
    Best regards,
    Marcus

  • Standard extractor for ECC table BFOD_A

    Dear Gurus,
    Do we have any standard extractor delivered by sap to extract data from ECC table "BFOD_A".
    Also this table does not have any timestamp field..so in case we create generic datasource on this table how to do we extract delta.
    Thanks,
    Sandeep

    As far as I know there is no standard extractors for this table. You are trying to get AR by Profit Center information? The FI consultant had tried adding a timestamp field but unfortunately the customized program is not 100% correct (as we have missing data in delta). So we just created a generic extractor on this table and perform weekly full load until the customized program got fix.

Maybe you are looking for

  • ITunes on Windows 7 64-bit

    Upon reboot iTunes will stop working. It will return with an error that "Quicktime was not found." I will uninstall and remove Quicktime and iTunes from my computer, clean out the registry, and then reinstall iTunes 9. It will work but the next time

  • Delete file using file adapter

    Hi, How can we delete a file using file adapter, I am using SOA 11g R3. Thanks Yatan

  • How to use Column_transform in external Table

    Hi Can you please help me out with the syntax of extenal table with Column_transform clause? I am trying to use a custom function to manipulate the data while loading into the column.Could you please give me an example? Regards

  • Server Hardening Issues in Distributed Installation on Windows

    Hello, We are installing SAP CE 7.1 in a Distributed Installation on Windows. SCS and App Server on one HOST and DB (Oracle) on another host. There is a firewall between DMZ and App Server. There is a second firewall between App and DB Server Our Net

  • Compare between 2 dates

    Hi, I would like to know how to compare between 2 dates. for example if I have 1 employee working from 01-01-2005 to 31-03-2005 I want to know how many days is that so that can also view how many working staff in 1 shop per day... cos I'm thinking to