Std. report RFKUML00
Hi,
We would like to get a report like RFKUML00 but it should be based on vendor invoice amount w/o tax. The RFKUML00 report on vendor gross invoiced amount.
Any suggestions or do I have to do a query?
BR
Joergen
Hi
You can view open purchase order report with ME2L, ME2N, ME2M with the selection parameter = WE101.
IF delivery complete indicator tick is not there in PO same PO is considered as Open Po
Vishal...
Similar Messages
-
Open and closing balances std report
Dear All,
please suggest me open and closing balances std report and can i suggest my user below t.code for viewing open and closing balnces for India scenarion T.code:J3RFLVMOBVED
Regards
Gopal.Shi
kindly chk MB5B it will fullfill your requirement
regards
praveen.k -
frnzz,
Is there a standard report to find out the headcount in an organisation?
Useful anwers will be rewarded.
thanx in advance
ViggyHi,
There are only following Std reports exist:
S_AHR_61016497 Existing Jobs
S_AHR_61016502 Existing Positions
S_AHR_61016503 Staff assignments.
See the Manning Level sample report:
report zporgr0040
line-size 108
line-count 60(1)
no standard page heading
message-id zndc.
Database Tables
tables: hrp1001, " HR Master Record (Orgn. Assignment)
pa0002, " Personal Data
t528t, " Position Texts
t527x, " Org Unit Text
t528b, " Positions
csks, " Cost Center
cskt. " Cost Center Texts
Declaration of Internal Tables
Internal Table for Orgn Object Data HRP1000
data: begin of obj_tab occurs 0,
otype like hrp1000-otype, " Object Type
objid like hrp1000-objid, " Object ID
plvar like hrp1000-plvar, " Plan Version
istat like hrp1000-istat, " Planning Status
begda like hrp1000-begda, " Begin date
endda like hrp1000-endda, " End date
end of obj_tab.
Internal Table for Active Employees data PA0000
data: begin of stat_tab occurs 0,
pernr like pa0000-pernr, " Object Type
begda like pa0000-begda, " Begin date
endda like pa0000-endda, " End date
stat2 like pa0000-stat2, " Employment Status
end of stat_tab.
Internal Table for Actual Orgn Assignment Data PA0001
data: begin of act_tab occurs 0,
pernr like pa0001-pernr, " Object Type
begda like pa0001-begda, " Begin date
endda like pa0001-endda, " End date
kostl like pa0001-kostl, " Cost Center
orgeh like pa0001-orgeh, " Org Unit
plans like pa0001-plans, " Position
natio like pa0002-natio, " Nationality
end of act_tab.
Internal Table for Orgn Data HRP1001
data: begin of org_tab occurs 0,
otype like hrp1001-otype, " Object Type
objid like hrp1001-objid, " Object ID
plvar like hrp1001-plvar, " Plan Version
istat like hrp1001-istat, " Planning Status
begda like hrp1001-begda, " Begin date
endda like hrp1001-endda, " End date
subty like hrp1001-subty, " Sub Type
sclas like hrp1001-sclas, " Type of Related Object
sobid like hrp1001-sobid, " Id of Related Object
kostl like pa0001-kostl, " Cost Center
plstx like t528t-plstx, " Position Text
orgtx like t527x-orgtx, " Org Unit Text
end of org_tab.
Internal Table for Position Calculations
data: begin of org1_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
objid like hrp1001-objid, " Object ID
end of org1_tab.
Internal Table for Position Calculations
data: begin of org2_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
count type i, " No of Positions
end of org2_tab.
Internal Table for Actual Manpower Calculations
data: begin of act1_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
natio like pa0002-natio, " Nationality
plans like pa0001-plans, " Position
end of act1_tab.
Internal Table for Actual Manpower Calculations(UAE)
data: begin of act2_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
natio like pa0002-natio, " Nationality
end of act2_tab.
Internal Table for Actual Manpower Calculations(Others)
data: begin of act3_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
natio like pa0002-natio, " Nationality
end of act3_tab.
Internal Table for Actual Manpower Calculations(UAE)
data: begin of act4_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
count1 type i, " No of Positions(UAE)
end of act4_tab.
Internal Table for Actual Manpower Calculations(OTHERS)
data: begin of act5_tab occurs 0,
kostl like pa0001-kostl, " Cost Center
count2 type i, " No of Positions(Others)
end of act5_tab.
Internal Table for Vaccancies Data
data: begin of vac_tab occurs 0,
plvar like hrp1007-plvar, " Plan Version
otype like hrp1007-otype, " Object Type
objid like hrp1007-objid, " Object ID
istat like hrp1007-istat, " Planning Status
begda like hrp1007-begda, " Begin date
endda like hrp1007-endda, " End date
vacan like hrp1007-vacan, " Vacancy Indicator
status like hrp1007-status, " Status of Vacancy
end of vac_tab.
Internal Table to store the Report Output data
data : begin of rep_tab occurs 0 ,
kostl(10) type n, " Cost Cente
plans like pa0001-plans, " Position
vacan like hrp1007-vacan, " Vacancy Indicator
status like hrp1007-status, " Status of Vacancy
plstx like t528t-plstx, " Position Text
orgtx like t527x-orgtx, " Org Unit Text
end of rep_tab.
Internal Table to store the Report Output data
data : begin of rep1_tab occurs 0 ,
kostl(10) type n, " Cost Cente
cnt type i, " No of Vacancies
end of rep1_tab.
Internal Table to store the Report Output data
data : begin of rep2_tab occurs 0 ,
kostl(10) type n, " Cost Cente
app_no type i, " Approved
nat_no type i, " National
exp_no type i, " Expatriate
tot_no type i, " Total
vac_no type i, " Vacancies
end of rep2_tab.
Declaration of Variables
data: v_sobid like hrp1001-sobid, " Object Id
v_sobid1 like hrp1001-sobid, " Object Id
v_sobid2 like hrp1001-sobid, " Object Id
v_sclas like hrp1001-sclas, " Related Obj Type
v_subty like hrp1001-subty, " Related Object Id
v_otype like hrp1007-otype, " Object Type
v_str(9) type c, " Text
v_str1(10) type c, " Text
v_cnt like sy-tabix. " Table Index
Declaration of Constants
constants : c_x type c value 'X', " Flag
c_stat1 like pa0000-stat2 value '3', " Emp Status
c_plan like hrp1001-plvar value '01', " Plan Version
c_name like hrp1000-uname value 'SAP', " Uname
c_uae like pa0002-natio value 'AE', " Country
c_type like hrp1007-otype value 'O', " Object Type
c_otype like hrp1007-otype value 'S', " Object Type
c_stat like hrp1007-status value '0', " Status
c_pstat like hrp1007-istat value '1', " Plang Status
c_sclas like hrp1001-sclas value 'K', " Rel. Obj Type
c_subty like hrp1001-subty value 'A002', " Related ObjId
c_subty2 like hrp1001-subty value 'A003', " Related ObjId
c_sclas1 like hrp1001-sclas value 'O', " Rel.Obj Type
c_subty1 like hrp1001-subty value 'A011', " Rel.Object Id
c_kokrs like coej-kokrs value '1000'. " Controlling Area
Selection Screen
selection-screen begin of block b1 with frame title text-001.
parameters :
p_date like pa0001-begda obligatory default sy-datum. " Date
select-options :
s_kostl for csks-kostl, " Cost Center
s_plans for t528b-plans. " Position ID
selection-screen end of block b1.
At selection-screen
at selection-screen.
Validate the Selection Screen fields
perform validate_screen.
Start-of-Selection
start-of-selection.
Get the Orgn data from database Table HRP1001
perform get_org_data.
Get the Actual Manpower from PA0001
perform get_act_data.
Get the Vaccancies data from database Table HRP1007
perform get_vac_data.
Append the data into final Internal Table
perform append_data.
Top-of-page
top-of-page.
Write the Report and Column Headings
perform top_of_page.
End-of-Page
end-of-page.
write /1(108) sy-uline.
End-of-Selection
end-of-selection.
Display the Output Report.
perform display_report.
Form-Routines
*& Form validate_screen
Validation of selection Screen fields
form validate_screen.
Validation of Position ID
clear t528b.
if not s_plans[] is initial.
select single plans
into t528b-plans
from t528b
where plans in s_plans.
if sy-subrc <> 0.
message e999 with 'Invalid Position ID'(009).
endif.
endif.
Validation of Cost Center
clear csks.
if not s_kostl[] is initial.
select single kostl
into csks-kostl
from csks
where kostl in s_kostl.
if sy-subrc <> 0.
message e999 with 'Invalid Cost Center'(008).
endif.
endif.
endform. "validate_screen
*& Form get_org_data
Get the Orgn Data from Database Table HRP1001
form get_org_data.
v_str = 'Developee'(002).
v_str1 = 'Deployment'(003).
Select All the Positions from HRP1000
select otype " Object Type
objid " Object ID
plvar " Plan Version
istat " Planning Status
begda " Begin date
endda " End date
into table obj_tab
from hrp1000
where otype = c_otype and
plvar = c_plan and
istat = c_pstat and
begda le p_date and
endda ge p_date and
objid in s_plans and
uname ne c_name.
sort obj_tab by otype objid.
Get the Orgn and Cost Center for all the above Positions
if not obj_tab[] is initial.
select otype " Object Type
objid " Object ID
plvar " Plan Version
istat " Planning Status
begda " Begin date
endda " End date
subty " Sub Type
sclas " Type of Related Object
sobid " Id of Related Object
into table org_tab
from hrp1001
for all entries in obj_tab
where otype = c_otype and
plvar = c_plan and
istat = c_pstat and
begda le p_date and
endda ge p_date and
sclas eq c_sclas1 and
subty eq c_subty2 and
objid eq obj_tab-objid.
endif.
sort org_tab by otype objid.
Get the Cost Center
loop at org_tab.
v_otype = c_otype. " S
v_sclas = c_sclas. " K
v_subty = c_subty1. " A011
v_sobid = org_tab-objid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc = 0.
org_tab-kostl = hrp1001-sobid+0(10).
else.
v_otype = c_otype. " S
v_sclas = c_sclas1. " O
v_subty = c_subty2. " A003
v_sobid = org_tab-objid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc = 0.
v_otype = c_type. " O
v_sclas = c_sclas. " K
v_subty = c_subty1. " A011
v_sobid1 = v_sobid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc <> 0.
v_otype = c_type. " O
v_sclas = c_sclas1. " O
v_subty = c_subty. " A002
v_sobid = v_sobid1.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc = 0.
v_otype = c_type. " O
v_sclas = c_sclas. " K
v_subty = c_subty1. " A011
v_sobid2 = v_sobid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc <> 0.
v_otype = c_type. " O
v_sclas = c_sclas1. " O
v_subty = c_subty. " A002
v_sobid = v_sobid2.
perform get_org using v_otype v_sclas v_subty
v_sobid.
else.
org_tab-kostl = hrp1001-sobid+0(10).
endif.
endif.
else.
org_tab-kostl = hrp1001-sobid+0(10).
endif.
else.
v_otype = c_otype. " S
v_sclas = c_otype. " S
v_subty = c_subty. " A002
v_sobid = org_tab-objid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc = 0.
v_otype = c_otype. " S
v_sclas = c_sclas. " K
v_subty = c_subty1. " A011
v_sobid1 = v_sobid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc <> 0.
v_otype = c_otype. " S
v_sclas = c_sclas1. " O
v_subty = c_subty2. " A003
v_sobid = v_sobid1.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc = 0.
v_otype = c_type. " O
v_sclas = c_sclas. " K
v_subty = c_subty1. " A011
v_sobid2 = v_sobid.
perform get_org using v_otype v_sclas v_subty
v_sobid.
if sy-subrc <> 0.
v_otype = c_type. " O
v_sclas = c_sclas1. " O
v_subty = c_subty. " A002
v_sobid = v_sobid2.
perform get_org using v_otype v_sclas v_subty
v_sobid.
else.
org_tab-kostl = hrp1001-sobid+0(10).
endif.
endif.
else.
org_tab-kostl = hrp1001-sobid+0(10).
endif.
endif.
endif.
endif.
Get the Position Text
clear t528t.
select single plstx from t528t into t528t-plstx
where sprsl = sy-langu and
otype = c_otype and
plans = org_tab-objid.
org_tab-plstx = t528t-plstx.
Get the Org Unit Text
clear t527x.
select single orgtx from t527x into t527x-orgtx
where sprsl = sy-langu and
orgeh = org_tab-sobid+0(8).
org_tab-orgtx = t527x-orgtx.
modify org_tab index sy-tabix.
clear v_sobid.
endloop.
sort org_tab by otype objid.
Calculate the Approved No of Positions
loop at org_tab.
if org_tab-kostl in s_kostl.
move-corresponding org_tab to org1_tab.
append org1_tab.
clear org1_tab.
endif.
endloop.
sort org1_tab by kostl objid.
clear v_cnt.
loop at org1_tab.
at end of kostl.
sy-tabix = sy-tabix - v_cnt.
org2_tab-kostl = org1_tab-kostl.
org2_tab-count = sy-tabix.
v_cnt = v_cnt + sy-tabix.
append org2_tab.
clear:org2_tab.
endat.
endloop.
sort org2_tab by kostl.
endform. "get_org_data
*& Form get_act_data
Get the Actual Manpower Data from Database Table PA0001
form get_act_data.
clear : stat_tab, act_tab.
refresh: stat_tab, act_tab.
Get all the Active Employees
select pernr " Object Type
begda " Begin date
endda " End date
stat2 " Emp Status
into table stat_tab
from pa0000
where stat2 eq c_stat1 and
begda le p_date and
endda ge p_date.
sort act_tab by pernr.
if not stat_tab[] is initial.
select pernr " Object Type
begda " Begin date
endda " End date
kostl " Cost Center
orgeh " Org Unit
plans " Position
into table act_tab
from pa0001
for all entries in stat_tab
where pernr eq stat_tab-pernr and
kostl in s_kostl and
plans in s_plans and
persg eq '1' and
begda le p_date and
endda ge p_date.
endif.
sort act_tab by pernr.
loop at act_tab.
move-corresponding act_tab to act1_tab.
clear pa0002-natio.
select single natio into pa0002-natio from pa0002
where pernr = act_tab-pernr.
if sy-subrc = 0.
act1_tab-natio = pa0002-natio.
endif.
append act1_tab.
clear act1_tab.
endloop.
sort act1_tab by kostl natio.
Calculate the Local and Expatriate Manpower
loop at act1_tab.
if act1_tab-natio = c_uae.
act2_tab-kostl = act1_tab-kostl.
act2_tab-natio = act1_tab-natio.
else.
act3_tab-kostl = act1_tab-kostl.
act3_tab-natio = act1_tab-natio.
endif.
append: act2_tab, act3_tab.
clear : act2_tab,act3_tab.
endloop.
sort act2_tab by kostl.
sort act3_tab by kostl.
Actual UAE Manpower
clear v_cnt.
loop at act2_tab.
at end of kostl.
sy-tabix = sy-tabix - v_cnt.
act4_tab-kostl = act2_tab-kostl.
act4_tab-count1 = sy-tabix.
v_cnt = v_cnt + sy-tabix.
append act4_tab.
clear:act4_tab.
endat.
endloop.
sort act4_tab by kostl.
Other Countries
clear v_cnt.
loop at act3_tab.
at end of kostl.
sy-tabix = sy-tabix - v_cnt.
act5_tab-kostl = act3_tab-kostl.
act5_tab-count2 = sy-tabix.
v_cnt = v_cnt + sy-tabix.
append act5_tab.
clear:act5_tab.
endat.
endloop.
sort act5_tab by kostl.
endform. "get_act_data
*& Form get_org
Get the Cost Center from Parent Org Id
form get_org using p_v_otype p_v_sclas p_v_subty p_v_sobid.
clear hrp1001.
select single * from hrp1001
where otype = p_v_otype and
plvar = c_plan and
istat = c_pstat and
begda le p_date and
endda ge p_date and
sclas eq p_v_sclas and
subty eq p_v_subty and
objid eq p_v_sobid.
v_sobid = hrp1001-sobid+0(8).
endform. " get_org
*& Form get_vac_data
Get the Vaccancies Data from Database Table HRP1007
form get_vac_data.
if not org_tab[] is initial.
select plvar " Plan Version
otype " Object Type
objid " Object ID
istat " Planning Status
begda " Begin date
endda " End date
vacan " Vacancy Indicator
status " Status of Vacancy
into table vac_tab
from hrp1007
for all entries in org_tab
where plvar = c_plan and
otype = c_otype and
istat eq c_pstat and
objid = org_tab-objid and
begda le p_date and
endda ge p_date and
vacan eq c_x and
status eq c_stat.
endif.
sort vac_tab by plvar otype objid.
Get the HR data into the rep_tab Internal Table
loop at vac_tab.
rep_tab-plans = vac_tab-objid.
rep_tab-vacan = vac_tab-vacan.
rep_tab-status = vac_tab-status.
read table org_tab with key objid = vac_tab-objid.
if sy-subrc = 0.
rep_tab-kostl = org_tab-kostl.
rep_tab-plstx = org_tab-plstx.
rep_tab-orgtx = org_tab-orgtx.
endif.
append rep_tab.
clear rep_tab.
endloop.
loop at rep_tab.
if not rep_tab-kostl in s_kostl.
delete rep_tab index sy-tabix.
endif.
endloop.
sort rep_tab by kostl plans.
delete rep_tab where plstx cs v_str.
delete rep_tab where orgtx cs v_str1.
Calculate the Count of Vacancies in each Division
clear v_cnt.
loop at rep_tab.
at end of kostl.
sy-tabix = sy-tabix - v_cnt.
rep1_tab-kostl = rep_tab-kostl.
rep1_tab-cnt = sy-tabix.
v_cnt = v_cnt + sy-tabix.
append rep1_tab.
clear:rep1_tab.
endat.
endloop.
sort rep1_tab by kostl.
endform. "get_vac_data
*& Form append_data
Append the data into final Internal Table
form append_data.
loop at org2_tab.
rep2_tab-kostl = org2_tab-kostl.
rep2_tab-app_no = org2_tab-count.
read table act4_tab with key kostl = org2_tab-kostl
binary search.
if sy-subrc = 0.
rep2_tab-nat_no = act4_tab-count1.
endif.
read table act5_tab with key kostl = org2_tab-kostl
binary search.
if sy-subrc = 0.
rep2_tab-exp_no = act5_tab-count2.
endif.
read table rep1_tab with key kostl = org2_tab-kostl
binary search.
if sy-subrc = 0.
rep2_tab-vac_no = rep1_tab-cnt.
endif.
rep2_tab-tot_no = rep2_tab-nat_no + rep2_tab-exp_no.
append rep2_tab.
clear rep2_tab.
endloop.
sort rep2_tab by kostl.
endform. "append_data
*& Form top_of_page
Write the Report and Column Headings
form top_of_page.
skip.
format color col_heading on.
write: /1(108) 'NATIONAL DRILLING COMPANY'(010) centered,
/1(108) 'Summary of Manning Level Report'(011) centered.
format color off.
skip.
write: /2 'Key Date :'(013), p_date,
75 'Report Run Date:'(041), sy-datum.
if not s_kostl[] is initial.
if s_kostl-high is initial.
write: /2 'Cost Center :'(023), s_kostl-low,
75 'Time :'(042), sy-uzeit.
else.
write: /2 'Cost Center From:'(024), s_kostl-low+7(3),
'To'(022), s_kostl-high,
75 'Time :'(042), sy-uzeit.
endif.
else.
write: /75 'Time :'(042), sy-uzeit.
endif.
if not s_plans[] is initial.
if s_plans-high is initial.
write: /2 'Position Id :'(019), s_plans-low,
75 'User :'(043), sy-uname.
else.
write: /2 'Position Id From:'(021), s_plans-low,
'To'(022), s_plans-high,
75 'User :'(043), sy-uname.
endif.
else.
write: /75 'User :'(043), sy-uname.
endif.
write: /75 'Page No :'(044), sy-pagno.
skip.
write /1(108) sy-uline.
format color col_heading.
write:/1 sy-vline,
12 sy-vline, 53 sy-vline,
64 sy-vline, 65(32) 'Actual'(018) centered,
97 sy-vline,108 sy-vline.
write:/1 sy-vline, 2(10) 'CostCenter'(014),
12 sy-vline, 13(40) 'Description'(026) centered,
53 sy-vline, 54(10) 'Approved'(025) centered,
64 sy-vline, 65(32) sy-uline,
97 sy-vline, 98(10) 'Vacancies'(017),
108 sy-vline.
write:/1 sy-vline,
12 sy-vline, 53 sy-vline,
64 sy-vline, 65(10) 'National'(015) centered,
75 sy-vline, 76(10) 'Expatriate'(020) centered,
86 sy-vline, 87(10) 'Total'(016) centered,
97 sy-vline,108 sy-vline.
format color off.
write /1(108) sy-uline.
endform. "top_of_page
*& Form Display_report
Write the Report Output
form display_report.
if rep2_tab[] is initial.
message i999 with
'No Data found for the entered Selection'(035).
else.
loop at rep2_tab.
Authorization Check for the Orgn and Cost Centers
perform auth_check_org.
if sy-subrc = 0.
clear cskt.
select single ltext into cskt-ltext from cskt
where spras = sy-langu and
kokrs = c_kokrs and
kostl = rep2_tab-kostl.
format color col_normal.
write: /1 sy-vline, 2(10) rep2_tab-kostl+7(3),
12 sy-vline, 13(40) cskt-ltext,
53 sy-vline, 54(10) rep2_tab-app_no,
64 sy-vline, 65(10) rep2_tab-nat_no,
75 sy-vline, 76(10) rep2_tab-exp_no,
86 sy-vline, 87(10) rep2_tab-tot_no,
97 sy-vline, 98(10) rep2_tab-vac_no,
108 sy-vline.
format color off.
at last.
sum.
format color 3.
write /1(108) sy-uline.
write: /1 sy-vline, 2(10) 'Total'(027),
12 sy-vline,
53 sy-vline, 54(10) rep2_tab-app_no,
64 sy-vline, 65(10) rep2_tab-nat_no,
75 sy-vline, 76(10) rep2_tab-exp_no,
86 sy-vline, 87(10) rep2_tab-tot_no,
97 sy-vline, 98(10) rep2_tab-vac_no,
108 sy-vline.
format color off.
endat.
endif.
endloop.
endif.
write /1(108) sy-uline.
endform. " Display_report
*& Form auth_check_org
Authorization Check for the Orgn and Cost Center
form auth_check_org.
authority-check object 'ZNDCHROM'
id 'PLVAR' dummy
id 'OTYPE' dummy
id 'KOSTL' field rep2_tab-kostl.
endform. "auth_check_org
reward if useful
regards,
ANJI -
Std report for BOM : Reg.
Hi experts,
I need to display the materials along with the BOM of those materials with its quantity and its total price while user give the vendor name and date range as input.
Is there any std report for the same? Try to give apt solution on it.
Thanks and Regards
Raaam's...Hi,
CS12 is to get multi-level BOM report. You can insert satndard price field and vendor filed into the layout and you can filter it within the report itself.
But what if you have several sources of supply and several prices (in info records!) for your goods? And this report can display only the multi-level BOM of one single material...
If you want a transaction described by you, you should develop an own report in ABAP - I guess...
You can post this thread in PP forum as well but I'm afraid there's no such kind of standard report in SAP...
BR
Csaba -
Hi, we defined over time as an activity.please advise any std report exists to displany total hrs for individual activity per order wise?
Hi
Check the report KRMI
Regards
Anupam Sharma -
Std Report for monitoring the GR Dt. Vs the OA & the Inbound Del Dt.
Dear All,
Is their any std report which can give me the comparision of Delivery date for PO Line item Vs the Order Acknowledgement Dt., Inbound Delivery Date and the Goods Receipt date.
Pls advise as I am not able to locate any std report.
thnx & Rgds,Hi
I do not think such standard report available in SAP , may be you can check ME2A and see to what extend it help or otherwise create some query or Z report
Kishor Rudani -
HI Experts,
In std. report MCXB, no. of defects value is always Zero. please guide me.
Advance thanks,
Regards,
SbabuHii,
First u need to check whether defcts recorded for Inspection lot / operation/ Charcteristics. once u select particular selction, system shows screen as "Defect overview for oper/charc/lot : Record". In thet screen in Item overview screen u need to capture code grp, code and enter no of defect. This will get reflected in MCXB screen. Here no of defct is not no of rejcted sample size.
with regards
K.Lokesh. -
Std report reg. inventory side
hi all,
we required all the details of GRN & MIRO including FI document with valuation. i.e (materil doc no,date, ref no, qty, materila, fi do no , valuation , pur inv no , ref no , date, net, gros amt, fi doc of miro etc.)
hv any standred report in sap?
thanks in advance
santosh.hi
u cant get all this on one screen
u have to create a z report
or try ME80FN
or try searching for the same in SAP1 transaction
SAP1 transaction for all std reports in SAP
regards
kunal -
Std report on pr(s) & po(S) released
hi mm experts,
Looking for a standard report for me54n/me55 - PRs- released & me28/me29n - POs -released.
I mean list display.
thanks in advance
Regards
Sriharithanx, me5a & me2n not meeting my requirements.
we have pr & po under release strategy and every pr is having more than 2 release levels & po is also having more than 2 release levels.
our purchase dept wud like to analyse the pr/po released date & time by release levels.
in me2n & me5a will only indicate whether pr/po is released or not,
looking for a std report for pr/po releases by persons/users, when we go into po/pr, select item and environment, item changes will show all details of pr/po released date& time.
kindly help if any report or dynamic selection where in we can pr/po released thru me54n/me55 & me29n/me28 per pr/po wise.
regards
srihari -
No data in the STD Report S_ALR_87012272
Hi,
The SAP STD report is s_alr_87012272 is not showing any values.
Kindly help me how we can get the values in the report.
Report long text: Cash Flow (Indirect Method) Variant 1
Report name 0SAPRATIO-03
Thanks..,,
Regards,
John PalDear John,
All reports are based on a financial statement version. This is
determined in the form with the same name under the general selections
(see overview of the report parameters). In the standard system, this is
the INT version. In the version, accounts with chart of accounts (INT)
and number are assigned to the individual items. If the system in
question uses another financial statement version or another chart of
accounts, the selected data cannot be assigned to the balance sheet
items.
This is the reason we suggest our customers to create their own form.
Check SAP note 43661 which describes creation of new
forms and reports.
Following are the steps to create the form and report:
FSI4 => Form type: Financial Statement Key Figures => Copy
Form: Name and Text for the new form
Copy from: 0SAPRATIO-04
FSI5 => find and double click the new form just created => Edit Gen.
data selection => change the FSV to what you want to use
FSI1 => Report type: Financial Statement Key Figures => Create
Report: Name and Text for the new report
With form: Name of the new form
details please refer to standard SAP report 0SAPRATIO-04
FSI3 => find and excute the new report to check if you can get the
result you want
To change the fin.statement version in the general data selections of
your new form is not enough.
All reports are based on a financial statement version. This is
determined in the form with the same name under the general selections
(see overview of the report parameters). In the standard system, this is
the INT version. In the version, accounts with chart of accounts (INT)
and number are assigned to the individual items. If the system in
question uses another financial statement version or another chart of
accounts, the selected data cannot be assigned to the balance sheet
items.
This is the reason we suggest our customers to create their own form.
Please find the attached note 43661 which describes creation of new
forms and reports.
Following are the steps to create the form and report:
FSI4 => Form type: Financial Statement Key Figures => Copy
Form: Name and Text for the new form
Copy from: 0SAPRATIO-04
FSI5 => find and double click the new form just created => Edit Gen.
data selection => change the FSV to what you want to use
FSI1 => Report type: Financial Statement Key Figures => Create
Report: Name and Text for the new report
With form: Name of the new form
details please refer to standard SAP report 0SAPRATIO-04
FSI3 => find and excute the new report to check if you can get the
result you want
To change the fin.statement version in the general data selections of
your new form is not enough.
Mauri -
Is thr any std report to find vendor excise details
Guru's
is thr any std report to find vendor excise details like CST,LST,ECC no.
Plz guide
Thamks in advancego to SE16
enter table name J_1IMOVEND enter
remove Maximum No. of Hits
press F8
Shift+ F8
click spreed sheet
give file name and select path
save
ur excle file is ready
reward if usefull -
DEAR ALL
I want one report of import & domestic purchase
based on slpite valuation i.e.
How much import & domestic
purchase of same material on different valuation type
is there any std report in SAP such as S_ALR_87012332hi,
by me2n transction you can able to get your data.
it can obtained by choosing the dynamic selection and going for the po item detail, in that you can able to find the valuation ctgy.
Regards,
velu -
Reg: Enhancements in std reports - Doubts
Hi Xperts
I'm trying to udnerstand the concpets of enhancements and would like to know the followig:
1. In a std report i want to add a parameter. Is it possible to do it using enhancements. As far i had seen explicit enhancements is not posible but only implicit.
2. if explicit enhancements are not possible in std reports then why enhancements when we have exits and badi which does the same job?
PS: Pls dont fwd any huge links. All i'm seeking is for logical anwsers.
thkx for ur help in advance.
Message was edited by:
Prabhu SHi Prabhu,
Good question .
And the explanation is that you can surely have explicit enhancement-option to add a paarmeter to a report provided its given by SAP.
But in reports wherein the selection screen parameters are defined in an include, then by default the framework provides an option to enhnace using implicit EO at top of include which you probly have already seen.
Thus in reports you might not have seen an explicit option provided by SAP however its very much possible as you can create your own report and try creating an explicit enhancement option in that and then create an implementation for the same.
I tried out looking for some similar standard report to give you an example but wasn't successful.
For your second point you can see example report where in explicit enhancements are there in report, though not for the purpose you mentioned.
SAPBAPITESTMARKING
Links i am sure you have seen Thomas Weiss blogs which i believe are the best reference material apart for SAP help on framework.
http://help.sap.com/saphelp_nw2004s/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm
Hope this helps to clarify you question to some extent.
Feel free to revert for more clarifications if any.
regards,
Vikas
null -
Std report on logestic invoice verification with all condition details
Hi friends,
We are using SAP ECC 6,
we need complete breakup of Logetisc Invoice verification details with all condition like Material, Services, Transport (Condition), Octroi (Condition), Sea Frieght (Condition)
Please reply ASAP
thanks
regards
Jitendra k. Surana.there is no such std report available....have a customised one.
-
Vendor bal.in foreign curr. std. report
hiii..
tell me the std.report t.codefor get vendor bal. in foreign curr.
thnaks
Rekha sharmaHi,
There is no standard report to view vendor balances in foreign currency. If you want see the posted foreigh currencies in vendor balances just select Amount in document currency from your lay out. Other wise if you are posted in any currency and you want see it in other foreign currecies also then go for your own report through Report Painter and assign the currecy which you want.
All the best,
Dharma Rao. Yekula
Maybe you are looking for
-
Transferring itunes library to external hd when music library is two places
first off i have read http://docs.info.apple.com/article.html?artnum=301748 so no one needs to post that. ok heres my issue. i have a folder on my computer that has all my music. i added that onto itunes and now its all on itunes. someof my files wer
-
Hi, I work on below version of oracle. SQL> select * from v$version; BANNER Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi PL/SQL Release 10.2.0.5.0 - Production CORE 10.2.0.5.0 Production TNS for IBM/AIX RISC System/6000: V
-
Hierarchical Field in Oracle Forms
Hi Experts Can any one please give me a sample code to write a hierarchical field in Oracle Forms. I want to display Category->Organization->Item->Quantity Thanks in Advance. Ahmed
-
How do you take a snapshot of a webpage in Safari?
Is there any way to take a snapshot of a page you are viewing through Safari? Hot key maybe?
-
Photoshop Elements 4 Manual Mac Specific
I am looking for a manual for Photoshop Elements 4 that is SPECIFIC for a MAC or possibly one that is easily used in conjunction with a MAC.