STDMES field in EDI _DC40  value is not getting reflected in SAP R/3

Hi All,
We have a EDI to IDOC scenario.
In message mapping we are hardcoding EDI_DC40\STDMES = 812 in message mapping and in sxmb_moni in PI we can see this value getting populated in xml message but at SAP end in we02 it is blank.
Value is not getting populated in SAP.
Could you please provide inputs on this?
Thanks in Advance
Best Regards,
Harleen Kaur Chadha

Hi Harleen,
Please check Note  SAP Note Number: 1331571 : IDoc adapter: Value STDMES is ignored
Regards,
Vikrant

Similar Messages

  • Replaced value is not getting relected in IDOC segment field

    Hi,
    Need your help for the below issue.
    I am replacing the PO # with Delivery Doc # . But the replaced value is not getting reflected in the IDOC segment field(e1bp2017_gm_item_create-po_number.).
    Function Module  which I am using is IDOC_INPUT_MBGMCR as a copy.
    Here is my code given below:
    SELECT
                SINGLE vbeln
                  INTO lx_vbeln
                  FROM lips
                 WHERE vgbel EQ e1bp2017_gm_item_create-po_number.
    Move lx_vbeln TO e1bp2017_gm_item_create-po_number.
    MOVE-CORRESPONDING e1bp2017_gm_item_create
                   TO goodsmvt_item.
    Then this is passed as  TABLE in "BAPI_GOODSMVT_CREATE".
    Please do the needful.

    Hi Dheepa,
    Check it in debug whether the filed is empty or having po#, when ur code is executed for the replacement. if it is empty, po# is populated after ur code. in this case you need to write the code in suitable place.
    Reddy

  • Values in parallel flow are not getting reflected

    Hi ,
    I have split in one of my auto activity.In this split one of flow I am changing instance variable (boolean) value.But this value is not getting reflected in second flow.Is there any way to set this value.
    Please help me
    Thanks
    Sailendra

    Yes - you can use your Split / Join design pattern for what you're trying to do. You just need to add one more thing.
    This is going to take a knowledge of:
    <li> Correlation - initiate and terminate methods
    <li> Notification using logic from a screenflow and
    <li> Message Wait activity with an Interrupt property
    It might seem like a lot, but if all you have is JMS then it's what I'd suggest.
    1. Create a correlation just after the Split and before your Automatic activity. The purpose of this correlation is to be the receptor of a notification when you want to eliminate the time loop. The logic for this looks like this:
    args[] = clientCaseId
    args[] = productId
    Correlation.initiate(name : "documentRetrieval", values : args)2. Add a Message Wait activity in your process. If you call it "WaitForEarlyReleaseCompletion" you might find that the logic in the step 4 is helpful. Have its property set to "Allows interruptions" and "External". Add this activity outside of the process's flow. Right mouse click the Messsage Wait activity -> click "Argument Mapping" -> click on the arguments icon in this dialog and add the (two in the example) argument variables you want to use to notify the correlation (clientCaseId and productId in this example). Click the "Correlations" icon in this dialog (two to the right of the arguments icon). In the left panel add a new correlation (name it case sensitive "documentRetrieval" for this example). Right click this new correlation and give it properties (the variables you want to use for the correlation - in this example "clientCaseId", "productId". Select the correlation and click the right arrow to move the correlation to the upper right portion of the dialog. Leave "Initiate" set to "No". In the lower right portion of the dialog, map the correlation's properties (again clientCaseId and productId in this example) to the incoming argument variables you just created (also called clientCaseId and productId in this example). Click OK
    3. This standalone activity needs to flow to an Automatic activity outside of the process. The logic in this Automatic activity needs two lines:
    // this assumes your time interval in your due transition is called "myTimer" and you just
    //   want to stop it
    myTimer = null
    action = BACK4. Inside your screenflow, in an Automatic Task send a notification to the Message Wait activity using the same correlation values (e.g. "clientCaseId" and "productId") you used earlier in the correlation intiate method.
    args as Any[Any]
    args["clientCaseId"] = clientCase.clientCaseId
    args["productId"] = clientCase.products.first.product.productId
    send(Notification, processId : "/DepartmentApprovals",
                                            activityName : "WaitForEarlyReleaseCompletion",
                                            arguments : args,
                                            argumentSetName : "WaitForEarlyReleaseCompletionIn")Dan

  • CPS parameters are not getting updated in SAP

    We have recently migrated our SAP and CPs servers, after that we are  facing few CPS issues  and it is affecting lot of key batch jobs. One typical example is given below.
    CPS is supposed to trigger a job  DD simulation, by copying the SOURCE_DATE_ID -1-Dec-2006  and modifies the parameters BUDAT and FAEDA_HIGH. The parameter FAEDA_HIGH is calculated as time.now()+ 5 working days as defined in the expression. When we try to run the job today with the date 24 Dec 2010, CPS has calculated the FAEDS_HIGH correctly as 2-Jan-2011. IN SAP the variant gets created but for the field FAEDA_HIGH the date value is not getting updated properly it is display some other date. (e.g)  It is showing as 4-jan-2011,  I removed the xpression and gave another date for the FAEDA_HIGH field as 10/01/2011, but in SAP it is not getting updated.
    Has anyone faced similar kind of issue. share you experience
    Regards,
    Ramprasad.

    Hi ,
    PLease find attached out XBP version
    XBP connection pool for SAP system ISU
      XMI interface version           : 2.0
    Since we have taken backup and restored the SAP Database, the CPs transport file already exists in the System.
    Basically what happens is
    So actually what is happening is, the CPS parameter FAEDS_HIGH expressions are  not used for due date calculation.. CPS just copies the source date-id to target id  and similarly for the due date based on the difference
    source_id variant date 01-12-2006   due date 02-12-2006  ( Next day)
    Target_id Variant date 25-12-2010  due date 26-12-21010  ( Next Day)
    I tried changing the Source date id from 01-12-2006 to 24-12-2010.
    Source Variant date 24-12-2010   due date 04-01-2011 ( 10 Days)
    Target Variant date 25-12-2010  due date 05-01-2011 ( 10 Days)
    Regards,
    Ram

  • Default Value is not getting displayed in SUN ONE Ldap

    Hello,
    I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
    The attribute default value is given through SUN ONE Console. But, In our application the default value is not getting displayed.
    We need the default value to run our applicatin. Can anyone help me for this issue
    Regards,
    K. Senthil Kumar

    Hi anandkumar,
    I belive this issue can be resolved by changing the  Query proprties for the perticular field.
    Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
    __Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
    FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
    Hope this helps you!!
    Best Regards,
    Maruthi

  • New Value addition in Restricted List under Rules not getting reflected

    Hi,
    I have created a custom rule for a custom profile. In the rule i have configured a metadata named as Reviewer. Under restricted values of reviewer i have put in 2 values.
    It is getting reflected properly in the profile check in form.
    But now when i add a new value, it is not getting reflected. Is restart required to get that field populated with new value ?. I have already published the schema base and static files.
    Please suggest.
    Regards,
    Boopathy P

    In your metadata field definition, your field is defined as having an option list. Does the value you just added to the restricted list also exist in the overall list of values for the field?
    For example, your list has values "a", "b", and "c". In your profile restricted list, you have "a" and "b". Now have you added "d" to the restricted list, which does not appear in the defined list for the metadata field?

  • KIND_OF_ENTRY field in the table CRMD_PARTNER is not getting populated

    Hi Friends,
    Iam working in CRM 5.0.
    In GUI, when i open an Oppurtunity and in the Sales Team tab, if i change the Partner value, then the entry 'KIND_OF_ENTRY' in the table CRMD_PARTNER is updated as 'C' for that particular line item in the header level. The value 'C' in KIND_OF_ENTRY field says 'Entered Manually'.
    But when I do the same operation in PCUI, the value is not getting updated. The KIND_OF_ENTRY field is blank in case of PCUI.
    Can anyone please tell me is this a configuration issue, or do I need to manually call the CRM_ORDER_MAINTAIN function module to meet this requirement. Or Is there anyother way to solve this.
    Thanks & Regards,
    Raju

    Hi,
    We are facing the same problem. How did you solve it?
    Thanks in advance

  • Open Sale Order Value (FD33) not getting diminished even after closing SO?

    Hi,
    Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
    What could be the reason ?
    Pls help.
    Regrds,
    Binayak

    Hi Binayak,
    As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
    Some precautions
    1. Always run the program in background by scheduling a job.
    2. The idle time is around midnight when no user is working on SAP.
    3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
    4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
    Hope this clarifies..
    Regards,
    Madhu.

  • While Creation Of SaleOrder Char Values are not getting saved.(V C)

    Hi SAP gurus,
    One of my client can able to create a saleorder but when we go and see in VA03 Display mode,we found Charactrestic values getting miised out.What could be the probale reasons.
    Note: I Have stimulate the required combination as per my client requirement in CU50,here i can able to indentify the Green Sign,but While Creation Of SaleOrder Char Values are not getting saved.
    Awaiting for your valuable reply.
    Cheers,
    Kumar.S

    Kumar ,
    If you assign values in classification view or configuration profile  they will become default for the product, and it willnot be changed in sales order.
    another thing if the item category is incorrect you will not get the configuration pop up at all .
    problem what i understand from your thred is at the time of sales ordeer creation there is some inconsistances in the configuration , may be some condition is not fullfilling.
    If in CU50 the result shown are error free, same configuration should owrk properly in sales configuration process, please again try to create it in sales order with same value assignment also check all the messages.
    see the result of configuration before saving the sales order , i hoep it will work for you.
    I am assuming all the things from SD are properly configured ie item catageory, varient pricing etc.
    Check and revert back.
    Regards
    Ritesh

  • Select-option value is not getting captured in at selection-screen on value

    In Selection screen , we have Select-option and  a parameter.
    Based on the values given in Select-option, the values of Parameter should get populate.
    To achieve this functionality,
    I  used  At selection u2013screen  on value request  for <parameter>  EVENT and 'F4IF_INT_TABLE_VALUE_REQUEST' Function Module.
    But the Select-option values are not getting captured in this event,unless u press Enter key.
    Is there any other way to achieve this functionality.
    Please Guide me.

    When you call function 'F4IF_INT_TABLE_VALUE_REQUEST'. make sure you send it the name of the screen variable - the F4IF_INT_TABLE_VALUE_REQUEST function calls DYNP_VALUES_READ itself if you tell it the name of your report, screen number, and the variable name... snippet below.
    Jonathan
      data:
        l_repid             type syrepid.
      l_repid = sy-repid.
      call function 'F4IF_INT_TABLE_VALUE_REQUEST'
        exporting
          dynpprog         = l_repid
          dynpnr           = '1000'
          dynprofield      = 'S_FIELD-LOW'  "Select options - low value
    * etc

  • Stock value is not getting updated in APO system From ECC automatically

    Hi All,
    Stock value is not getting updated in APO system From ECC automatically but if we do it manually from transaction CFM2 it will get updated.
    for this we are using EXIT_SAPLCSTK_001.
    I am using VL10A for delivery and VL06G for PGI
    I have also checked integration model for material and stock.
    Please help me out as it is very urgent.
    Thanks,
    Gaurav Mittal
    Edited by: GAURAV MITTAL on Feb 6, 2008 6:09 PM

    Hi,
    for transferring the stock data from R/3 to APO automatically, you need to have the integration model for material and stock activated.
    please check the same.
    if this does not help, let me know in detail the steps which you are following..
    Ram

  • Values are not getting updated in sales report

    I have configured sales information system, and i have been trying to run sales report but values are not getting updated in sales report, System will through message that no data exists.
    regards,
    thooyavan

    Hi,
    Please check with the Customer and Material Statistics group in the Customer and material master respectively.
    Further check with the LIS settings (Sales Area combination with the Update group).
    Reward points if this helps you.
    Regards,
    Harsh

  • Values are not getting updated in 'stocks App' in my i4 phone.  What is the solution?

    values are not getting updated in 'stocks App' in my i4 phone.  What is the solution?

    you have encountered activation lock.  Read iCloud: Activation Lock

  • Excise rate and value is not getting defaulted from the purchase order

    Hi all,
    While capturing excise invoice , the excise rate and value is not getting defaulted from the purchase order and in Excise Item Tab BED,AED,ECS is Zero at both header as well as item level for only one material in STO process and if we are doing same process taking other material all things are coming perfectly and We are maintaining condition with respect to vendor,plant and material combination.Any input related to this will be helpfull and rewarded.
    Regards
    Vishal

    Hi,
    Follow STO Process for this;
    1.Create a vendor for the company code of receiving plant, using account group: 0007 using T-Code XK01.
    2. Assign this vendor to Delivering plant
    Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
    3. Create internal customer with the sales area of the vendor. Go To XD01
    4. In pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
    5. Maintain condition records for the relevant pricing condition.
    6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
    7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
    8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
    Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
    9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
    Assign the document type NB to supplying plant and receiving plant
    10. After all settings, Create the STO using T-Code: ME21N and maintain pricing conditions of freight and Save.
    11. In supplying plant Maintain condition record in sales using VK11 the same will flow in receiving plant when referring the OBD no during MIGO.
    10. Create Delivery: VL10G
    12. Picking, PGI: VL02N
    13. Billing: VF01
    Save the document and its done
    14. J1IIN - Outgoing Excise Invoice
    15. MIGO - Goods Receipt against outbound Delivery
    16. J1IEX - Capture & Post Excise Invoice
    Rgs

  • Value property not getting updated for edit on firefox

    Der Sir/Mam,
    I am a selenium tester and my test fails on moxila due to following issue,
    Value property not getting updated for edit on firefox thats why failing the script while identifying the object from xPath.
    The test case run fine on IE.
    I want to identify the object by its xPath saying value = "Some value"
    I can not check thousands of object by looking in to its value attribute property.
    Thanks in advance,
    Rohit

    I'm not sure whether we can solve your question here. We are mostly supporting the released version of Firefox (Firefox 20) for regular use rather than old versions in a test harness. You might need to reach out to the [https://groups.google.com/forum/?fromgroups#!forum/selenium-users Selenium Users Group] if you can't replicate the problem in Firefox 20.

Maybe you are looking for