Steady red light with blinking yellow

recently my phone (Curve 8530) had a steady red light and every 3-4 seconds it would blink yellow... have no idea what it means... it seems to function normally but slower than normal... any ideas what it could be??

Hello!
Hope your Battery is charged properly and not creating issue at the time of re charging?
Is your phone consuming much amount of Battery ?

Similar Messages

Steady red light + Blank screen

Today, as I got up, I noticed that my blackberry cure 8320 had a white screen. This has neever happened before, so I just removed the battery, and put it back in.
Something I noticed was that when I inserted the battery, a steady red light appeared for about six seconds, and the screen was completely blank. Thinking that this would go away, I stepped outside, and I got a call. The screen was still black. I was able to answer the call prefectly fine, but I couldn't interact with it in any other way other than the voice command button.
I've spent the whole day googling it, and it seems that I can't find a solution. Any help?
***Notes:
The blackberry I have is unlocked. I ordered it online from BestBuy.
It's a T-Mobile blackberry running on AT&T
---EDIT---
I've also tried to connect it to my laptop, and it works fine. I've re-installed my OS (4.5), restored it, deleted everything on it, and still no luck.

My son got up this morning with the same complaint, I now have it on while it is charging through the pc (although he said he charged it overnight via a mains plug) the battery is now at 15% so think that may have been the issue x

Red light keeps blinking

I recently purchased the new 1gb i pod shuffle. the problem is that i left it plugged in to my computer to charge but when i safely removed it, the i pod shuffle went really hot and ten minutes later the red light started blinking and so i don't know what is wrong with it

My question is not necessarily that there is a red
light, but a series of green and orange flashing
light, followed by no sound of any sort. I've
upgraded the ipod and tried to down load new songs
and it simply won't play them. That is when it
flashes green and orange dots.
Alternating green and orange means no playable content (ERROR: No music loaded). Alternating green and two orange (10 seconds) means ERROR: iPod shuffle must be restored
Which are you experiencing? If the first, then you need to select one of the songs and click on File>Get Info>Summary and let us know what it says.

Blackberry Does not Function, Plugged into USB red light then 3 yellow lights and off

Blackberry Does not Function, Plugged into USB red light then 3 yellow lights and off, I cannot even claim the warrently without buying 50$ support?
I am an Electrical Engineer by trade and have 15+ years working with computers. I left it to charge over the last 3 days. Doesn't do anything. It's a $300 paper weight. My mother bought this product for me because she thought it was a great present but now it turns out to being worthless.
What kind of company are you? Honestly?
How the hell do you think your gonna get customer loyalty with this kind of customer service. It's clearly obvious why apple is destroying you. You are worthless competition. I want this blackberry fixed. I will NOT pay for support just to replace my blackberry. That is crooked business honestly. You should be ashamed of yourselves.
My mom bought this for my birthday 4 months ago. I open it up and it doesn't even work. How can you do this to your customers. It's no wonder your company is going out of business.
I demand you fix my issue. I have 1 year of warranty support. I will NOT pay extra just to get my Blackberry exchanged.
Wait until I inform all my news groups in my area of this. I am from ONTARIO, BRAMPTON. I am a CANADIAN, just like your company. CP24 WILL HEAR ABOUT THIS. I WILL RUIN YOUR REPUTATION. I PROMISE YOU THAT.
Solved!
Go to Solution.

No sarcasm here either.
One of my PlayBooks recently went 'possum on me, too. Very frustrated, tried all the known tricks and tips to charge and revive it. Over a year old. I called the support line knowing it was out of date and they would deny me.
Nope, the lady very pleasantly accepted my request, I spoke with customer support and they bugged me via email daily until we got it resolved -- to MY satisfaction. My first interaction with PlayBook support, and it could not have gone more nicely nor further beyond my expectation.
I don't know what you experienced with PlayBook support, you didn't say why you're so mad with them. This is a user-to-user community support forum. We are not RIM employees, but volunteers who enjoy assisting other users. RIM personnel rarely comment on queries posted here. You would have noticed this in the EULA and message upon registration.
Sooo... good luck, and just for the record... the LED activity you described IS very fixable. Sorry you don't have the choice to explore those remedies any longer.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I can't import HD video from Samsung OIS Duo into FCP. However, I can see the video with QT. In FCP, I just see a red bad with a yellow triangle (warning). Can someone help me. The video are Full HD 1080/60i?

I can't import my HD videos (MP4) from my Samsung OIS Duo into FCP.
However, I can see the video with QuickTime.
In FCP, I just see a red box with a yellow triangle at the center(warning). Can someone help me. The video are Full HD 1080/60i.
I also try converting from MP4 to DV. Cannot import the .DV either.
Can someone help me?

Could it be the case that you have "proxy media" selected in the preferences (under Final Cut Pro -> Preferences, click on "Playback" and see which is selected, proxy or optimized), BUT you are not creating proxy media when importing?
If that is the case, either
- switch to "original/optimized media",
or
- create the proxy media (control-click the clip(s) in the event browser, choose "Transcode media" e check the box for "create proxy media").

Red light stops blinking and then stays solid

This one is strange. I open an email on my BB and the red light stops blinking and then stays solid for about 5 minutes. It doesnt go off when I close the email either.
Took the battery out to see if that would clear it but it still doing it.
Any thoughts ?????

Hi Willsie,
Sounds like when the red light is solid, the device is still usable? Assuming this is correct, I have three questions for you:
1. Can you you confirm this problem ONLY happens when you open up emails in the Messages application?
2. Can you tell us the application version you are running from (OPTIONS > ABOUT)?
3. Also, which third party applications do you have installed?
tnx

MiFi - Steady red light

Documentation doesn't make mention of a steady red power indicator. I've had this unit for over a year with no problems to speak of. We mostly use it with laptops and iPods as we go down the road and occasionally as a backup when the cable modem flakes out.
This morning I was using it to surf the web for the cable provider's phone number to report an issue with the cable modem.
After about 30 minutes of usage (it was not fully charged) the light blinked red and it shut down. I plugged in the A/C adapter and the light went steady red (not amber) After being connected all day it is still steady red and I cannot get the unit to power on. After unplugging the adapter the light remains steady red for 10-15 seconds before turning off. Pressing the power button for any length of time from 1 second to a minute gives no response at all.
Thoughts? Suggestions?

" The light is solid green when the device is on, red when the battery is low, and flashes red when it's charging"
http://reviews.cnet.com/modems/novatel-wireless-mifi-2200/4505-3004_7-33675616.html

Red Light with Authorization Object in PFCG

Hello All - I have a question with authorization objects, there are three roles with red lights 'ON' in authorization object screen in our PRD. However users who are using these roles have no auth issues, standard procedure is to make all lights green in PFCG by maintaining these auth objects.
Big question is "what is the down fall by leaving these objects RED, I need to support my theory when I say all lights green with auth objects.
Why best practise says maintain all lights to green?
Please suggest, appreciate your suggestions.
Thanks.
Edited by: AJ on May 12, 2009 9:44 PM

Hi,
> "What will be the difference between leaving that red lights 'ON' vs "disabling" these red objects? (I am bit confused on this).
Red Object: As you know that authorization Objects comprises of Authorization fields. There are certain fields, which are known as "Organization Level" fields and need to be maintained Centrally. If you miss this fields, then the traffic light icon is RED. For all other authorization fields, light will be Yellow if you miss any blank field to maintain. During check, these fields will provide missing authorization (but you may not get error if same object is present in the role with all fields maintained status).
Disabled Object: If you make any Object Disable, then during check, this Object will not be treated for checking Authorizations. But profile generator will keep this in mind, so you don't get Standard Objects repeatedly (if already present in Deactivated status also) whenever you go to "..Merge with New Data".
You all other questions are very nicely answered already.
Regards,
Dipanjan

Tablet fails boot, red light, then blinking green....GRRR!!

Just as my tablet recieved the OS update, it no longer booted.
It was fully charged, and plugged into a standard micro USB at the time.
It said download was successful, restart now... so I did.
And I never could use it again.
When I tried to boot it, it had a red light, then the red light blinked a few times, then nothing.
And then, it blinked green six times. then nothing.
I tried a USB to my computer to use Blackberry Manager (latest version).
I tried of course, the various holding down the power button schemes, including the old one of holding down ALL the keys, and the new one with just the power and forward keys. Nothing.
I went on EBAY to get an OEM charger stand. I hope that works, but I don't have much hope for that.
And now, nothing. My blackberry is a brick after the update.
I came to like blackberry because of the reliability of the phone. While all of my iphone friends were crazy about tech support of apple, I replied, I don't need tech support with my blackberry (curve) nothing ever goes wrong.
But this whole situation, is getting me down.
Solved!
Go to Solution.

Connect it to the OEM wall outlet charger.
Press and hold down the power key ONLY for 20 seconds.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Solid green light with blink every 5 seconds

I use this shuffle on my windows xp pc. When it was time to charge the (first gen) shuffle, I connected it to powered USB, as usual. After plugging it in I got a solid green light with a blink every 5 seconds. I then tried plugging it into the wall adapter charger with the same outcome. I left it overnight to charge and upon checking the battery, it's still red/orange.
Does anyone have an idea what could be the problem?
Thanks

Does this mean I have to buy a new one, or is the
battery replacable? I haven't even owned it for a
full year.
Take it to an Apple Store... they'll replace it.

Z10 Red Light Keeps Blinking

my bbz10 red light just keep blinking wat should i do

you have either a email, miss call or some type of text notification.

Time Capsule light is blinking yellow

There appear to be two issues.
1. No DNS Server(s)
2. Double NAT
How do I correct these issues?
Thank you.

When I go to "Off (Bridge Mode)", it tells me that I cannot be in that mode if I want to maintain my guest network. Will that be an issue at the end of this process?
The type of "modem" that you have dictates that the Time Capsule must be configured in Bridge Mode to work correctly...to avoid the Double NAT error on the network. Unfortunately, the Guest Network feature cannot be enabled when the Time Capsule is in Bridge Mode. So, it's kind of a "Catch 22".
Apple assumes that you have a "simple" modem, but you don't. You have a gateway device, which is combination modem/router in one box.
2. After I power up the modem, does it matter the order in which I power up other devices -- IMac, Time Capsule, and Airport Express being the only ones other than the modem that are on the network?
The important thing is that after you power everything down, that you power up the modem first, then any device that is directly connected to the modem...like the Time Capsule. After that, the order is not critical.

Xperia z2 dead , red light blinking when connected to usb charging cable

My phone is totally dead, i cant do anything power button + volume up button , force restart button near the sim , and nothing happens , also when i connect to a usb charger the red light is blinking all the time . Please HELP ME i need my xperia z2 back to live....

Hi,
For how long time have the phone been connected to the charger? If the LED is blinking red, it sounds like the battery is completely flat. Thereby it can take a longer time before the phone indicates charging and/or powers on. I suggest that you connect the phone to the charger via wall socket and let it charge for 1-2 hours.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Updated to v4.5 now phone not working, red light blinking

K...so I updated to the new software v4.5 on my 8320 curve and now it is not booting up and the red light is blinking twice every few seconds. I have already removed the battery and done everything that I can think of without using JML because I don't want to lose my info....please help...thanks.

I fixed my problem. I found this on the tmobile support site, and it worked after the second try.
Handheld does not turn on and the light flashes
Ensure the handheld is NOT connected to the computer.
In BlackBerry Desktop Manager, open Application Loader and Update Applications.
Remove the battery in the handheld.
Reconnect the handheld to the computer
When the Drop-down list on the Communication Port Selection window changes to USBIN, click Next.Note: If there is no USB option in the drop-down disconnect the device, remove the battery and re-connect the device without the battery.
If the Handheld Password Required dialog box appears, type your password. The Application loader will detect the BlackBerry device.
Proceed with running Application Loader. Allow the Application Loader process to complete; this can take 30 - 45 minutes.Note: If the battery was removed during step 5, make sure it is re-inserted when the Application Loader comes to the Wait For Device Initialization stage.
Do not disconnect the device from the computer until you receive a message your PC, “The loading operation was successful.”

After upgrade attempt for 8310, device will not restart -- only blinking red light

Problem: I tried to upgrade the device software to 4.5, and now THE DEVICE WILL NOT RESTART AT ALL. Not with a hard reset. Not using the SIM and battery from my 8310 and putting it in hers. Nothing. Just a red light that blinks in a pattern: two quick blinks, then a pause; two quick blinks, then a pause, etc.
Background: This 8310 had vers. 4.2.2 device software, and something like 2.6 on the desktop. I downloaded/upgraded to 4.6 for the desktop and 4.5 for the device from the AT&T site. The Desktop manager prompted me to install the new device software... looking good. After several minutes, I got an "unknown error" message and it stopped the install.Following a support article, I uninstalled reinstalled both updates, but then the problem occurred: no NOTHING happens on the device screen at all, just the blinking red light when the device is plugged in.
The AT&T store tells me this is about the tenth "dead" Curve he's seen in about a week, apparently all occurring when folks have attempted a software updgrade. Any thoughts/help to offer?
Please help!
Solved!
Go to Solution.

Check this instruction:
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry

Steady red light with blinking yellow

Similar Messages

Maybe you are looking for