Steam login launcher doesn't work

When I click on steam, the first time login screen appears (Where it says create an account, first time ps3 login, and login to existing account) but I can't click on anything, I have to kill it. I reinstalled steam and now it doesn't even start. If I try to run steam from the terminal all I get is this:
Running Steam on arch 64-bit
STEAM_RUNTIME is enabled automatically
I'm using the catalyst-test drivers. Any help is appreciated. Thank you.
Last edited by lazarojhr16 (2015-02-06 00:32:10)

Well I found the problem, it has to do with my system being in spanish. When I switch to english it works perfectly. When I switch back to spanish it doesn't work but at least now I'm getting this at the terminal:
Running Steam on arch 64-bit
STEAM_RUNTIME is enabled automatically
Installing breakpad exception handler for appid(steam)/version(1422054110)
Installing breakpad exception handler for appid(steam)/version(1422054110)
(steam:25977): Gtk-WARNING **: Imposible encontrar el motor de temas en la ruta al _modulo: «adwaita»,
(steam:25977): Gtk-WARNING **: Imposible encontrar el motor de temas en la ruta al _modulo: «adwaita»,
/usr/share/themes/Adwaita/gtk-2.0/gtkrc:1163: error: unexpected identifier `direction', expected character `}'
(steamwebhelper:25980): Gtk-WARNING **: Imposible encontrar el motor de temas en la ruta al _modulo: «adwaita»,
(steamwebhelper:25980): Gtk-WARNING **: Imposible encontrar el motor de temas en la ruta al _modulo: «adwaita»,
/usr/share/themes/Adwaita/gtk-2.0/gtkrc:1163: error: unexpected identifier `direction', expected character `}'
Installing breakpad exception handler for appid(steamwebhelper)/version(20150123134624)
Installing breakpad exception handler for appid(steamwebhelper)/version(1422020784)
Installing breakpad exception handler for appid(steamwebhelper)/version(20150123134624)
Installing breakpad exception handler for appid(steamwebhelper)/version(1422020784)
Installing breakpad exception handler for appid(steamwebhelper)/version(1422020784)
Installing breakpad exception handler for appid(steam)/version(1422054110)
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
Installing breakpad exception handler for appid(steam)/version(1422054110)
Installing breakpad exception handler for appid(steam)/version(1422054110)
Installing breakpad exception handler for appid(steam)/version(1422054110)
Installing breakpad exception handler for appid(steam)/version(1422054110)
Installing breakpad exception handler for appid(steam)/version(1422054110)
Installing breakpad exception handler for appid(steam)/version(1422054110)
FillInMachineIDInfo took a total of 0 milliseconds
Installing breakpad exception handler for appid(steam)/version(1422054110)
Installing breakpad exception handler for appid(steam)/version(1422054110)
Generating new string page texture 7: 128x256, total string texture memory is 131,07 KB
Generating new string page texture 8: 64x256, total string texture memory is 196,61 KB
Generating new string page texture 9: 48x256, total string texture memory is 245,76 KB
Generating new string page texture 10: 256x256, total string texture memory is 507,90 KB
Generating new string page texture 11: 8x256, total string texture memory is 516,10 KB
Generating new string page texture 12: 16x256, total string texture memory is 532,48 KB
Generating new string page texture 13: 24x256, total string texture memory is 557,06 KB
Generating new string page texture 14: 32x256, total string texture memory is 589,82 KB
Installing breakpad exception handler for appid(steam)/version(1422054110)
Installing breakpad exception handler for appid(steam)/version(1422054110)
Installing breakpad exception handler for appid(steam)/version(1422054110)
Installing breakpad exception handler for appid(steam)/version(1422054110)
Installing breakpad exception handler for appid(steam)/version(1422054110)
Steam: An X Error occurred
X Error of failed request: BadValue (integer parameter out of range for operation)
Major opcode of failed request: 18 (X_ChangeProperty)
Value in failed request: 0x0
Serial number of failed request: 557
xerror_handler: X failed, continuing
assert_20150205221633_1.dmp[26103]: Uploading dump (out-of-process)
/tmp/dumps/assert_20150205221633_1.dmp
/home/lazaro/.local/share/Steam/steam.sh: línea 736: 25977 Violación de segmento (`core' generado) $STEAM_DEBUGGER "$STEAMROOT/$STEAMEXEPATH" "$@"
Requested Force create but SharedObjectMutex already created
Forced create but already created for SharedObjectEvent
Forced create but already created for SharedObjectEvent
assert_20150205221633_1.dmp[26103]: Finished uploading minidump (out-of-process): success = yes
assert_20150205221633_1.dmp[26103]: response: CrashID=bp-f6bc885f-39f2-4bff-9b68-266592150205
assert_20150205221633_1.dmp[26103]: file ''/tmp/dumps/assert_20150205221633_1.dmp'', upload yes: ''CrashID=bp-f6bc885f-39f2-4bff-9b68-266592150205''
It says segfault at line 736 of steam.sh. I went to the script and at that line all that is there is this
STATUS=$?
I also see
$STEAM_DEBUGGER "$STEAMROOT/$STEAMEXEPATH" "$@"
Requested Force create but SharedObjectMutex already created
but I don't know what that means.
What can I do to get steam to work under my system while it's in spanish?
Last edited by lazarojhr16 (2015-02-06 03:34:39)

Similar Messages

  • Login script doesn't work

    Hi,
    I use the login user server behavior which is build in
    coldfusion 7 as my loginscript. Somehow it doesn't work. If I fill
    in the username and password in the form the user is redirected to
    the login fail page instead of the login success page.
    I don't understand it because it's possible to do a query
    into the database with the username and password...
    This is the script I use:
    <cfif IsDefined("FORM.lognaam")>
    <cfset MM_redirectLoginSuccess="hm_beheer.cfm">
    <cfset MM_redirectLoginFailed="login.cfm?error=1265">
    <cfquery name="MM_rsUser" datasource="" username="">
    SELECT usr_login,usr_ww FROM usr WHERE
    usr_login='#FORM.lognaam#' AND usr_ww='#FORM.ww#'
    </cfquery>
    <cfif MM_rsUser.RecordCount NEQ 0>
    <cftry>
    <cflock scope="Session" timeout="30" type="Exclusive">
    <cfset Session.MM_Username=FORM.lognaam>
    <cfset Session.MM_UserAuthorization="">
    </cflock>
    <cfif IsDefined("URL.accessdenied") AND false>
    <cfset MM_redirectLoginSuccess=URL.accessdenied>
    </cfif>
    <cflocation url="#MM_redirectLoginSuccess#"
    addtoken="no">
    <cfcatch type="Lock"><!--- code for handling
    timeout of cflock --->
    </cfcatch>
    </cftry>
    </cfif>
    <cflocation url="#MM_redirectLoginFailed#"
    addtoken="no">
    <cfelse>
    <cfset MM_LoginAction=CGI.SCRIPT_NAME>
    <cfif CGI.QUERY_STRING NEQ "">
    <cfset MM_LoginAction=MM_LoginAction & "?" &
    XMLFormat(CGI.QUERY_STRING)>
    </cfif>
    </cfif>
    Hopefully somebody can help me with this..
    Regards,
    Kabbi

    Hi, thank you very much.
    However I still keep getting this error now:
    Variable MM_LOGINACTION is undefined.
    The error occurred in C:\xampp\htdocs\bar\beheer\login.cfm:
    line 187
    185 : <tr>
    186 : <td width="101" height="296"
    valign="top"><!--DWLayoutEmptyCell--> </td>
    187 : <td width="503" valign="top"><form
    name="login" id="login" method="POST"
    action="<cfoutput>#MM_loginAction#</cfoutput>">
    188 : <table width="503" border="0" cellpadding="0"
    cellspacing="0" class="blank" align="center">
    189 : <!--DWLayoutTable-->
    Do you perhaps also have an idea what wen wrong here?
    Regards,
    Kabbi

  • Login/sso doesn't work suddenly

    Hello forum,
    we have a little problem with our productive PI 7.0. Out of a sudden the login on Repositoy and Directory doesn't work anymore. RWB, ABAP login and SLD work properly. Out admin is on holiday and hopefully hasn't changed anything to our user data... Is there a task or anything which could cause this?
    If yes, how to fix it?
    Regards
    Christian

    HI,
            You can do soft restart through tcode SMICM on Abap stack.
            Tab --> Administration --> ICM  --> J2EE Instance --> Send Soft Shutdown --> With Restart.
    It will restart only java stack.
    Regards,
    Anurag

  • Upgraded Norton Security, now automatic login fills doesn't work

    This also happened when I was using IE. When I downloaded Firefox the automatic login for individual sites started working again. I have turned it on at Norton 'manage logins', but still doesn't work. Just wondering if Firefox has switch that must be turned on. Thanks

    Did you restart Windows after installing that Norton upgrade?

  • ASDM Launcher doesn't work on Win7 64 bit after reinstalling Win7

    Reinstalled Win7 64bit and have been unable to get the ASDM launcher to work.  I can connect to multiple ASAs via HTTPS.  If I install the ASDM from v6.3.4 or 6.4.5, the launcher for that specific device works fine using:
    C:\Windows\SysWOW64\javaws.exe -localfile -J-Djnlp.application.href=https://<ipaddress>/admin/public/asdm.jnlp "C:\Users\rwrussell\AppData\LocalLow\Sun\Java\Deployment\cache\6.0\30\2f5259de-112bec59"
    However, the ASDM launcher which prompts you for the IP address of the node you want to connect to doesn't work.  It pops up and prompts you for the address, username and password but then just hangs at "contacting the device, please wait.  Sniffing the workstation's Ethernet shows that no packets are generated destined for the IP address of the ASA at all.  The ASDM launcher is using the following: 
    Target:  C:\Windows\SysWOW64\javaw.exe -Xms64m -Xmx512m -Dsun.swing.enableImprovedDragGesture=true -classpath lzma.jar;jploader.jar;asdm-launcher.jar;retroweaver-rt-2.0.jar com.cisco.launcher.Launcher
    Start in:  "C:\Program Files (x86)\Cisco Systems\ASDM\"
    The only troubles I see posted on the web are with regards to the launcher installing the target as SYSTEM32 instead of SysWOW64, but this is OK here.  Java version is v7 update 9. 

    Well, I gave up and uninstalled Java 7 and the ASDM.  After installing Java 6 update 27 and then reinstalling ASDM, it works fine again.  I installed Java 7 again while leaving 6/27 installed and had the same issues.  Uninstalled 7 again and everything works fine.
    I really wish Cisco would write Java code that is forward and backward compatible.  It seems we have this issue every few Java updates at which time Cisco will release something like ASDM v61557 or the like if they admit there is an issue at all.  Performing the correct calls instead of taking proprietary shortcuts eliminates this problem with incompatible code between releases.
       ---RWR

  • Upgraded to Mountain Lion, now my login password doesn't work

    Hello,
    As the title says, I upgraded my iMac with Mountain Lion, and now my password doesn't work. I can't log in to the computer at all.
    And no, I didn't forget it. It's been the same since I first got it (so an unfortunate hack on wireless wouldn't be out of the question...)
    Suggestions? Solutions?
    Thanks

    Welcome to the Apple Support Communities
    Press Command and R keys while your computer is starting, go to Utilities > Terminal and type:
    resetpassword
    Press Reset Home Directory Permissions and ACLs. If it doesn't work, reset the password

  • OSX 10.9 Mavericks is there any way to hide servers which always appear in finder after login (hide login items doesn't work as stardered)

    hi all my boss has just got himself a nice new mac and wants to connect it on to my windows domain at work, no problems there it’s all connect fine, one thing we done was to map a few of our network drives on our domain so he can easily load them to his mac, works great when it’s on the domain however when he goes home and logs in for each mapped drive it throws up a window saying it can’t connect or when it is connect opens up every drive, even after disabling them at login, now on the apple website the text reads "if you don’t want an item's window to be visible after login, select hide. (Hide does not apply to servers, which always appear in the finder after login), does anyone know any work around that can maybe solve this or point me in the direction where I can find one.
    Cheers
    Gordon
    Network Admin
    BPDZenith

    hi all my boss has just got himself a nice new mac and wants to connect it on to my windows domain at work, no problems there it’s all connect fine, one thing we done was to map a few of our network drives on our domain so he can easily load them to his mac, works great when it’s on the domain however when he goes home and logs in for each mapped drive it throws up a window saying it can’t connect or when it is connect opens up every drive, even after disabling them at login, now on the apple website the text reads "if you don’t want an item's window to be visible after login, select hide. (Hide does not apply to servers, which always appear in the finder after login), does anyone know any work around that can maybe solve this or point me in the direction where I can find one.
    Cheers
    Gordon
    Network Admin
    BPDZenith

  • Hide function in Login Items doesn't work for iChat and Address Book app.

    There is a problem with the hide function for iChat and Address Book application in Login Items. If you go to System Preferences, click on Login Items, add the iChat and Address Book application to the Login Items, activate the hide function for iChat and Address Book application and restart your Mac iChat and Address Book application will start with opening a window. Normally this shouldn't happen if the hide function in Login Items is activated for iChat and Address Book application.
    Message was edited by: Roman Patrice Gego

    Hi,
    Your link refers to changes to 10.6.3 prior release as tested by Developers.
    The numbering system tells us that. (Build 10Dxxx).
    Therefore it is an Update and not an Upgrade, therefore no-one is going to get charged.
    If the article is the so called Release Notes then they mention nothing about correcting any issue with Login Items Hiding.
    If you think an issue is being missed there is a place to report that, from this icon view list http://www.apple.com/feedback/ which includes Hardware and Software.
    I personally have not tested Login Items Hiding as I tend to think there is no point in having an App open if it not on the Desktop.
    As Kappy pointed out there was little progress on a similar issue with Leopard.
    This could be interpreted that Apple feel that the issue does not effect enough people or that other issues are more important.
    As anyone and everyone can report Issues and contribute their ideas to the OS and it's improvement via the Feedback links it would seem to be a question of enough people bringing it to Apple's Attention.
    I would tend to work on Issues that stopped an App functioning first, linked with integration with the OS and any changes to the major parts of it such as a Quicktime.
    Lesser issues that maybe more cosmetic in appearance would tend to fall down my list of things to do.
    Presumably Apple have a grading system on such things that may not fit with either of our views.
    As Apple don't reveal any details about the OS Updates or even Upgrades then anything any of us think we interpret as a pattern is just that - an interpretation.
    Consequently anything we say on the subject is then likely to be seen as speculation under the Terms of Use of these Boards.
    8:28 PM Sunday; May 9, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Remeber login data doesn't work

    Video of this problem: http://www.youtube.com/watch?v=xRjQ4KdxM1w
    Problem as following: when I start Ovi Suite it ask for my Ovi account (with I have) so I login using my login data and select remeber. I quit Ovi Suite and start it again: first this it ask are my login data.
    Yet another problem of this **bleep** software.
    Ovi Suite 3.0.0.284
    Nokia E71
    Windows 7 x64

    juha_n wrote:
    Hi,
    Could you please provide the following information so we could hopefully be able to solve your problem:
    - When the problem occurs do you use the same Windows user account as you used when you installed Nokia Ovi Suite?
    I am the only user on that PC, so yes
    - Do you do any user switching prior to the problem occurring or does it happen even if you just start up the machine and log in using single user?
    I am the only user on that PC, so no user switching
    - When you sign-in in Nokia Ovi Suite it should create a file that stores your encrypted sign-in information. Can you check if this file exists right after successful manual sign-in. It is named userinfo and stored probably either in C:\Users\your user name\AppData\Local\NokiaAccount. or C:\Documents and Settings\your user name\AppData\Local\NokiaAccount.
    File is there (Win7 Pro 32).
    This worked fine with 2.x but is now broken with 3.x
    Note to other users: You have to set Windows explorer to SHOW HIDDEN FILES in order to verify whether the file is there. On Both WIn XP and Win 7 the AppData folder is hidden by default.
    Ever seen a black lemon? They turn black when they rot. My N97 is black. 'nuff said

  • ARD Login script doesn't work with similar usernames

    We have a lab of Macs all of which have two accounts whose usernames start with the same characters (rms and rmsadmin). There are times when we would like to be able to log on to all the computers simultaneously as the rmsadmin user with ARD. Because both of the usernames start with the same three characters, when the following commands are sent via ARD, the login process defaults to selecting the student account (rms) and won't log in as rmsadmin:
    osascript -e 'tell application "System Events" to keystroke "rmsadmin"'; \
    osascript -e 'tell application "System Events" to keystroke return'; \
    osascript -e 'tell application "System Events" to delay 0.5'; \
    osascript -e 'tell application "System Events" to keystroke "password"'; \
    osascript -e 'tell application "System Events" to delay 0.5'; \
    osascript -e 'tell application "System Events" to keystroke return'
    Anyone have a solution to this?
    Thanks in advance for taking the time to read this and giving it some thought.
    Peggy
    Xserve PowerPC G4, MacBook Pro, PowerBook, etc.   Mac OS X (10.4.8)  

    Since we do have the same problem but also some additional infos I bump this thread in the hopes of getting some answers.
    The login script does run, but unfortunatly only when I start it manually. It does not run during login.
    The only purpose of the script is to map some drives and it works fine under XP. Where else can I find infos about the problem?
    Our script looks like that:
    On Error resume next  
    Set objADSystemInfo = CreateObject("ADSystemInfo")  
    Set objUser = GetObject("LDAP://" & objADSystemInfo.UserName)  
    strDn = objUser.Get("distinguishedName")  
    strSam = objUser.Get("sAMAccountName")  
    strCn = objUser.Get("cn")
    Set colGroups = objUser.Groups  
    Pos = Instr(strDn,"OU=")  
    if Pos = 0 then  
        strOu = "" 
    else  
        strOu = Mid(strDn,Pos+3,2)  
    end if  
    Set objNetwork = CreateObject("WScript.Network")   
    objNetwork.MapNetworkDrive "h:", "\\frodo\user\" & strSam  
    objNetwork.MapNetworkDrive "j:", "\\frodo\misc" 
    objNetwork.MapNetworkDrive "l:", "\\frodo\department" 
    objNetwork.MapNetworkDrive "q:", "\\frodo\projects" 
    objNetwork.MapNetworkDrive "k:", "\\frodo\department\" & strOu  
    if strOu = "IT" then  
        objNetwork.MapNetworkDrive "x:", "\\frodo\software" 
    end if  
    'WScript.Echo strOut  
    For Each objGroup in colGroups  
        if objGroup.CN = "DreCash" then  
        objNetwork.MapNetworkDrive "p:", "\\gollum\drehcash" 
        end if  
    Next 
    objNetwork.MapNetworkDrive "i:", "\\192.168.1.6\shares" 

  • Creative Console Launcher doesn't work with Windows 8

    I trying to install Creative Console Launcher on Windows 8 x64,but i get the following error:
    error.PNG
    Unsupported with Windows 8! Without this program,my headphones Tiamat 7.1,work without bass!
    Sorry for bad english,i hope you understand me!Thank you!

    See:
    *https://support.mozilla.org/kb/windows-media-or-other-plugins-stopped-working
    There has been a change in where Firefox searches for plugins and the plugins folder in the Firefox program folder is no longer scanned for plugins, so Firefox won't find them anymore if they are installed in the plugins folder instead of the "browser\plugins" folder that Firefox now scans.
    You can set the plugins.load_appdir_plugins pref to true on the about:config page to make Firefox scan the "<install>/plugins/" directory for plugins like the WMP plugin (np-mswmp.dll).
    You can alternatively move plugins from "<install directory>\plugins\" to "<install directory>\browser\plugins\" (create this folder when missing) to make Firefox find them again.
    *http://www.ghacks.net/2013/05/15/why-you-may-have-lost-access-to-plugins-or-extensions-in-firefox-21/
    *http://mike.kaply.com/2013/04/24/major-changes-coming-in-firefox-21/

  • Login password doesn't work (and repeatedly resets itself)

    I've run across an odd problem maintaining my in-laws' Mac Mini running OS X Tiger (10.4.11). From time to time, one of the user (non-admin) accounts seems to lose its password--if I type the correct password in to log in, it's rejected. (Yes, it's the correct password, and, no, caps lock is not on.) Every time this occurs, it always happens to the same user account. I haven't been able to figure out any other way to restore access to the problematic account than logging in to an admin account to reset the password on the problematic account.
    The most puzzling thing is that resetting the password works for a while, but then the problem reoccurs. This has happened at least once or twice a month for several months, and I'd really like to find the underlying issue. Just to rule a couple other things out, I'm sure they aren't changing their password, and I have tried running Disk Utility in the past to repair permissions with no effect.
    Any thoughts?
    Message was edited by: HabibisFam

    Hi there,
    Here is something that might be helpful - reset the password of the user by using your system disk. Put your Tiger CD in the computer and restart. As the computer is restarting, hold down the C key until you see the gray Apple appear. This will begin the "setup" process. Press OK for selecting your language and then at the top, look at Utilities for "Password Reset". Change the password to something you have NEVER used and click Save. Restart and open Keychain Access. Under Edit - click the "Change Password for Keychain" and then reset your password with the same password you used in the "Password Reset". Hope this helps. I've also found that disabling the airport card will usually allow me to login with problem account. First, I would login with Admin account, disable airport, then re-login with "problem account".
    -JD

  • Hide Volume als Login Item doesn't work

    Hi folks!
    When I login into my account on my mac all network volumes appear despite the hide-configuration in login items. Are there any ways to resolve that issue?
    Thanks...
    Timi

    see this link for a workaround
    http://discussions.apple.com/thread.jspa?messageID=10511740&#10511740

  • ActiveDirectory mapping file, doesn't work for login

    The mapping file below works.
    Logged in as administrator, in the SAP NP administrator web tool,
    I can see and edit users in the datasource (Active Directory).
    However, when users in the AD try to login to the portal, they get "User authentication failed".
    <u>Default trace log show:</u>
    Authentication failed on LDAP server: back end message [LDAP: error code 49 - 80090308: LdapErr: DSID-0C090334, comment: AcceptSecurityContext error, data 775, vece]
    and
    java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key DS_AD_I
    <b>Any ideas on what in the configuration file below,
    that could cause these errors ?</b>
    ====================================
    <b>Configuration file</b>
    ====================================
    <?xml version="1.0" encoding="UTF-8"?>
    <!-- $Id: //shared_tc/com.sapall.security/630_SP_COR/src/_deploy/dist/configuration/shared/dataSourceConfiguration_ads_readonly_db.xml#6 $ from $DateTime: 2004/08/20 09:55:24 $ ($Change: 17140 $) -->
    <!DOCTYPE dataSources SYSTEM  "dataSourceConfiguration.dtd">
    <dataSources>
        <dataSource id="PRIVATE_DATASOURCE"
                    className="com.sap.security.core.persistence.datasource.imp.DataBasePersistence"
                    isReadonly="false"
                    isPrimary="true">
            <homeFor>
                <principals>
                     <principal type="group"/>
                     <principal type="user"/>
                     <principal type="account"/>
                    <principal type="team"/>
                    <principal type="ROOT" />
                    <principal type="OOOO" />
                </principals>
            </homeFor>
            <notHomeFor/>
            <responsibleFor>
                <principals>
                     <principal type="group"/>
                     <principal type="user"/>
                     <principal type="account"/>
                    <principal type="team"/>
                    <principal type="ROOT" />
                    <principal type="OOOO" />
                </principals>
            </responsibleFor>
            <privateSection>
            </privateSection>
        </dataSource>
         <dataSource id="AD_I"
                   className="com.sap.security.core.persistence.datasource.imp.LDAPPersistence"
                   isReadonly="false"
                   isPrimary="true">
              <homeFor/>
              <responsibleFor>
                        <principal type="account">
                                  <nameSpace name="com.sap.security.core.usermanagement">
                                       <attributes>
                                            <attribute name="j_user"/>
                                            <attribute name="logonalias"/>
                                            <attribute name="j_password"/>
                                            <attribute name="userid"/>
                                       </attributes>
                                  </nameSpace>
                        </principal>
                        <principal type="user">
                             <nameSpaces>
                                  <nameSpace name="com.sap.security.core.usermanagement">
                                       <attributes>
                                            <attribute name="firstname" populateInitially="true"/>
                                            <attribute name="displayname" populateInitially="true"/>
                                            <attribute name="lastname" populateInitially="true"/>
                                            <attribute name="fax"/>
                                            <attribute name="email"/>
                                            <attribute name="title"/>
                                            <attribute name="department"/>
                                            <attribute name="description"/>
                                            <attribute name="mobile"/>
                                            <attribute name="telephone"/>
                                            <attribute name="streetaddress"/>
                                            <attribute name="uniquename" populateInitially="true"/>
                                       </attributes>
                                  </nameSpace>
                                  <nameSpace name="com.sap.security.core.usermanagement.relation">
                                       <attributes>
                                            <attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE"/>
                                       </attributes>
                                  </nameSpace>
                                  <nameSpace name="$usermapping$">
                                          <attributes>
                                               <attribute name="REFERENCE_SYSTEM_USER"/>
                                          </attributes>
                                     </nameSpace>
                             </nameSpaces>
                        </principal>
                        <principal type="group">
                             <nameSpaces>
                                  <nameSpace name="com.sap.security.core.usermanagement">
                                       <attributes>
                                             <attribute name="displayname" populateInitially="true"/>
                                             <attribute name="description" populateInitially="true"/>
                                             <attribute name="uniquename"/>
                                        </attributes>
                                  </nameSpace>
                                  <nameSpace name="com.sap.security.core.usermanagement.relation">
                                       <attributes>
                                             <attribute name="PRINCIPAL_RELATION_MEMBER_ATTRIBUTE"/>
                                             <attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE"/>
                                       </attributes>
                                  </nameSpace>
                                  <nameSpace name="com.sap.security.core.bridge">
                                       <attributes>
                                            <attribute name="dn"/>
                                       </attributes>
                                  </nameSpace>
                             </nameSpaces>
                        </principal>
              </responsibleFor>
              <attributeMapping>
                   <principals>
                        <principal type="account">
                             <nameSpaces>
                                  <nameSpace name="com.sap.security.core.usermanagement">
                                       <attributes>
                                            <attribute name="j_user">
                                                 <physicalAttribute name="samaccountname"/>
                                            </attribute>
                                            <attribute name="logonalias">
                                                 <physicalAttribute name="samaccountname"/>
                                            </attribute>
                                            <attribute name="j_password">
                                                 <physicalAttribute name="userPassword"/>
                                            </attribute>
                                            <attribute name="userid">
                                                 <physicalAttribute name="null"/>
                                            </attribute>
                                       </attributes>
                                  </nameSpace>
                             </nameSpaces>
                        </principal>
                        <principal type="user">
                             <nameSpaces>
                                  <nameSpace name="com.sap.security.core.usermanagement">
                                       <attributes>
                                            <attribute name="firstname">
                                                 <physicalAttribute name="givenname"/>
                                            </attribute>
                                            <attribute name="displayname">
                                                 <physicalAttribute name="displayname"/>
                                            </attribute>
                                            <attribute name="lastname">
                                                 <physicalAttribute name="sn"/>
                                            </attribute>
                                            <attribute name="fax">
                                                 <physicalAttribute name="facsimiletelephonenumber"/>
                                            </attribute>
                                            <attribute name="uniquename">
                                                 <physicalAttribute name="samaccountname"/>
                                            </attribute>
                                            <attribute name="loginid">
                                                 <physicalAttribute name="null"/>
                                            </attribute>
                                            <attribute name="email">
                                                 <physicalAttribute name="mail"/>
                                            </attribute>
                                            <attribute name="mobile">
                                                 <physicalAttribute name="mobile"/>
                                            </attribute>
                                            <attribute name="telephone">
                                                 <physicalAttribute name="telephonenumber"/>
                                            </attribute>
                                            <attribute name="department">
                                                 <physicalAttribute name="ou"/>
                                            </attribute>
                                            <attribute name="description">
                                                 <physicalAttribute name="description"/>
                                            </attribute>
                                            <attribute name="streetaddress">
                                                 <physicalAttribute name="postaladdress"/>
                                            </attribute>
                                            <attribute name="pobox">
                                                 <physicalAttribute name="postofficebox"/>
                                            </attribute>
                                       </attributes>
                                  </nameSpace>
                                  <nameSpace name="com.sap.security.core.usermanagement.relation">
                                       <attributes>
                                            <attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE">
                                                 <physicalAttribute name="memberof"/>
                                            </attribute>
                                       </attributes>
                                  </nameSpace>
                                  <nameSpace name="$usermapping$">
                                          <attributes>
                                               <attribute name="REFERENCE_SYSTEM_USER">
                                                    <physicalAttribute name="sapusername"/>
                                               </attribute>
                                          </attributes>
                                     </nameSpace>
                             </nameSpaces>
                        </principal>
                        <principal type="group">
                             <nameSpaces>
                                  <nameSpace name="com.sap.security.core.usermanagement">
                                       <attributes>
                                             <attribute name="displayname">
                                                  <physicalAttribute name="displayname"/>
                                             </attribute>
                                             <attribute name="description">
                                                  <physicalAttribute name="description"/>
                                             </attribute>
                                             <attribute name="uniquename" populateInitially="true">
                                                  <physicalAttribute name="cn"/>
                                             </attribute>
                                        </attributes>
                                  </nameSpace>
                                  <nameSpace name="com.sap.security.core.usermanagement.relation">
                                       <attributes>
                                             <attribute name="PRINCIPAL_RELATION_MEMBER_ATTRIBUTE">
                                                  <physicalAttribute name="member"/>
                                             </attribute>
                                             <attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE">
                                                  <physicalAttribute name="memberof"/>
                                             </attribute>
                                        </attributes>
                                  </nameSpace>
                                  <nameSpace name="com.sap.security.core.bridge">
                                       <attributes>
                                            <attribute name="dn">
                                                 <physicalAttribute name="null"/>
                                            </attribute>
                                       </attributes>
                                  </nameSpace>
                             </nameSpaces>
                        </principal>
                   </principals>
              </attributeMapping>
              <privateSection>
                   <ume.ldap.access.server_type>MSADS</ume.ldap.access.server_type>
                   <ume.ldap.access.context_factory>com.sun.jndi.ldap.LdapCtxFactory</ume.ldap.access.context_factory>
                   <ume.ldap.access.authentication>simple</ume.ldap.access.authentication>
                   <ume.ldap.access.flat_group_hierachy>true</ume.ldap.access.flat_group_hierachy>
                   <ume.ldap.access.user_as_account>true</ume.ldap.access.user_as_account>
                   <ume.ldap.access.dynamic_groups>false</ume.ldap.access.dynamic_groups>
                   <ume.ldap.access.ssl_socket_factory>com.sap.security.core.server.https.SecureConnectionFactory</ume.ldap.access.ssl_socket_factory>
                   <ume.ldap.access.server_name>machine.company.com</ume.ldap.access.server_name>
                   <ume.ldap.access.user>[email protected]</ume.ldap.access.user>
                   <ume.ldap.access.server_port>389</ume.ldap.access.server_port>
                   <ume.ldap.access.base_path.user>OU=Users,OU=Company,DC=company-tst,DC=local</ume.ldap.access.base_path.user>
                   <ume.ldap.access.password>$ume.ldap.access.additional_password.1</ume.ldap.access.password>
                   <ume.ldap.access.base_path.grup>OU=Groups,OU=Company,DC=company-tst,DC=local</ume.ldap.access.base_path.grup>
                   <ume.ldap.access.objectclass.user>User</ume.ldap.access.objectclass.user>
                   <ume.ldap.access.objectclass.uacc>User</ume.ldap.access.objectclass.uacc>
                   <ume.ldap.access.objectclass.grup>Group</ume.ldap.access.objectclass.grup>
                   <ume.ldap.access.naming_attribute.user>cn</ume.ldap.access.naming_attribute.user>
                   <ume.ldap.access.auxiliary_naming_attribute.user>samaccountname</ume.ldap.access.auxiliary_naming_attribute.user>
                   <ume.ldap.access.naming_attribute.uacc>cn</ume.ldap.access.naming_attribute.uacc>
                   <ume.ldap.access.auxiliary_naming_attribute.uacc>samaccountname</ume.ldap.access.auxiliary_naming_attribute.uacc>
                   <ume.ldap.access.naming_attribute.grup>cn</ume.ldap.access.naming_attribute.grup>
                   <ume.ldap.unique_user_attribute>samaccountname</ume.ldap.unique_user_attribute>
                   <ume.ldap.unique_uacc_attribute>samaccountname</ume.ldap.unique_uacc_attribute>
              </privateSection>
         </dataSource>
    </dataSources>

    <?xml version="1.0" encoding="UTF-8" ?>
    <web-app version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
    <display-name>WebApp</display-name>
    - <welcome-file-list>
    <welcome-file>login.html</welcome-file>
    </welcome-file-list>
    - <error-page>
    <error-code>404</error-code>
    <location>/Error.html</location>
    </error-page>
    <jsp-config />
    </web-app>
    This is a very simple war with no component and an error page is defined. But this doesn't work. When I type something like /loginnnn.htmllll, it doesn't give me the error page. That is my problem. Any idea???

  • My app store doesn't work at all....safari doesn't work properly....it shows something like super fish....if i try to login to app store it shows connection failed. i wanted to re install osx or install yosemite beta

    my app store doesn't work at all....safari doesn't work properly....it shows something like super fish....if i try to login to app store it shows connection failed. i wanted to re install osx or install yosemite beta

    HI ..
    The only way to reinstall OS X on a Mac already running v10.9 is to use OS X Recovery.
    Starrtup your Mac while holding down the Command + R keys.
    From there you should be able to access the built in utilities to repair the startup disk and reinstall OS X.
    Please read >  OS X Recovery

Maybe you are looking for