Step backward hotkey not working while using brush tool? - Photoshop CC 2014

Hi,
I'm using Photoshop CC 2014 in Mavericks. I've tried using the step backward hotkey (command+option+z) and it seems to work fine. Then I use the brush tool and it stops working until I switch to another tool. I'm a digital artist, so I move very quickly while painting, and switching out of the brush tool to step backward on something slows me down terribly. I'll switch and the hotkey works as intended. I've tried changing it to a different set of keys (for example command+z) with the same results. Is this a bug or a feature?

Usually it turns out for tablets that aren't mainstream that they just haven't updated their drivers to work with photoshop cc.
For example, most people don't have problems with wacom tablets in photoshop cc.
One other thing that could possibly be the cause besides the tablet driver is your graphics card driver.
If in photoshop cc you go to Edit>Preferences>Performance and turn off Use Graphics Processor and then restart photoshop cc, does that make a difference?
If it does then perhaps your graphics card driver needs to be updated from the maker of the card.
(not through windows updates)

Similar Messages

Microphone not working while using handset

microphone not working while using handset
But it is working when loud speaker is On
Y
Wat to do??
Kindly revert with your comments

Repair the phone with PCC and report back PC Companion (PCC) Bridge (for Mac) Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355

My autofill does not work while using Safari. Have checked both Safari and Apple settings.

My Autofill does not work while using Safari. I have checked both my Safari settings and my Apple settings but don't know what else to do.

Hi Eustace....yes, I did reset Safari but it didn't help. I'm running Mac OS X Lion 10.7.5...which might be the problem...my Safari is Version 6.1.1.

Undo/Step Backward will not work?

I've repeatedly tried to change the settings for Undo and Step Backwards to Command + Z and Command + Opt + Z respectively, though neither work. The setting changes don't save, either. What's wrong? Undo and Step Backward both haven't worked since the start.
What's with the not equals sign? I've followed all that I can with no results and it's driving me up the wall. I just want to be able to use these without having to erase every line as I go! Haha.

Thanks for the explanation.
However, I am still puzzled as to how the programme can detect lack of time code when the tape was not even rewound or played. I belive the time code is written on the tape.
Anyway, I tried iMovie and found that the programme detects the camera and controls it. However, it does not recognise the downconverted DV signal. When I turned the DV conversion off, the video was detected and imported using MagicMovie in HD. I still have not gone round to burning on a DVD. ( I only read the article mentioned by Sue after having tried the iMovie programme - somehow the link that was so clearly stated in the reply missed my notice earlier on).
I have actually recorded the downconverted DV video on a standalone Phillips DVD recorder but the DVD only plays in that recorder and my Mac DVD Player even tho I have finalised the +R disk. The same problem occurs with a +RW disk.
I appreciate the replies and the explanations. Thanks.
m_elan
Power Mac G5 Mac OS X (10.4.9) 2.5 Gb ram

Messages not working while using Internet sharing from my iMac ... Any troubleshooting tips/approaches ?

I am connecting to the internet using the Internet Sharing from my iMac ...
The trouble is the messages in the Messages app are not sent when I am connected through my iMac ... When I key in a message and hit send a progress bar appears fills up till 90% and just gets stuck there and after a while the red exclamation mark stating the message was not sent appears ... Now if I connect through my wi-fi router or thether through my phone it works fine ... I can send / recieve messages ...
Similar points to note - Today when I tried to make an App Purchase - The security info screen ( new additon - http://isource.com/2012/04/11/iphone-app-store-security-info-alert/ ) popped up but I got a blank screen for the securtiy questions screen ... It was not loading the screen ... Some games the game center invite does not work through my Internet sharing (tried in MetalStorm) ... but works fine thorough wi-fi or thether ...
What could be the problem with my iMac s sharing? Any suggestions would be really useful /// Thanx in advance
I am running Lion ... and I have updated to the latest Airport software ...
Only thing I tried was changing the DNS ... but that s not related right ?

Powerline adapters use your home powerlines (mains a/c) to connect your devices via ethernet to your modem, they're easy to set up and the they TOTALLY fixed my ATV problem, the problem seems to be with the wireless. I've been trawling through apple discussions, and did found a workaround to my problem https://discussions.apple.com/thread/4222883?start=0&tstart=0
but its just a workaround :/

On call sound volume is not working while using ha...

The volume control does not work on call while using hands free on my Lumia 800..is that a known issue?

Hi,
this is a JDeveloper and ADF forum, not an OA framework forum. We don't have the "OAGlobalButtonBean" class and thus wont be able to help
Frank

Enter Key Not Working When Using Text Tool

For some reason, my enter key has stopped working when using the text tool. Instead of making a soft return to a new line, it simply commits the type. What is going on here?
I'm using a desktop and CS3.

there are 2 enter keys in key board
if u enter main key board enter, sentence will go to next line
In case u enter the key available in rightside of the key board , in the cluster of numericals, the type tool is committed.

Step forward/step backward buttons not working

I can't move frame by frame in the source monitor using the buttons or the arrow keys. I don't know why, it just isn't working. It doesn't have anything to do with the keyboard shortcuts (which I checked) because the buttons themselves aren't working either. It's like the entire function is disabled.

Thanks. I just got off a chat with support. We tried changing settings, deleting preferences, etc. Finally ended up taking my edit and throwing it into a new sequence. Problem solved. Best guess, just a glitch. Glad it worked. Thanks for responding.

ISE backup not working while using tftp

I have configured a repository on ISE admin node to use tftp for taking backups.
repository master
url tftp://<IP>
I initiate backup on demand to use the defined repository and specify Application-only backup. After sometime, I see success on ISE node and "show backup history" also shows success
ise/admin# sh backup history
Thu Sep 27 06:12:43 UTC 2012: backup backup1-120927-060253.tar.gpg to repository master: success
Thu Sep 27 07:31:56 UTC 2012: backup backup1-120927-072227.tar.gpg to repository master: success
However, when I check on tftp server, I see nothing. No files with names backup1-120927-060253.tar.gpg or backup1-120927-072227.tar.gpg...Has anybody else seen similar issue? Is there a bug with tftp server backup on ISE nodes?
Thanks,
Kashish

Kashish,
Can you try moving a small file over to the tftp server? Check the directory of the local disk and issue a a copy disk:/file tftp:/path.
See if that moves a file over. I havent personally used tftp I always use ftp.
Thanks,
Tarik Admani
*Please rate helpful posts*

Deselect not working when using move tool

Photoshop CS6
For some reason, when I am using the move tool and click outside the bounding box it won't deselect. It use to work about a week ago. Can anyone help me figure out what I did?

there are 2 enter keys in key board
if u enter main key board enter, sentence will go to next line
In case u enter the key available in rightside of the key board , in the cluster of numericals, the type tool is committed.

Hello I am using Ipad 4 and its charger is not working while I was using it few days before and it was working properly now it says that the cable does not support this Ipad Please Help me out.

Hello I am using Ipad 4 and its charger is not working while I was using it few days before and it was working properly now it says that the cable does not support this Ipad Please Help me out.

Try a reset:
- Hold the home button and sleep/wake button down at the same time. When the Apple logo appears release both buttons then try and charge again.
If issue persists try:
- Another known working cable
- Check the charging port for any damage or debris
- You could also use a dry soft bristle toothbrush and gently brush it on the port to clean it of any debris that could be in there

Photoshop CC. Colour selection not working when using alt and brush.

Hi, Photoshop CC. Windows 8.1 64 bit. Colour selection not working when using alt and brush. I have tried rebooting and other things like closing swatch panel etc.
The alt key is otherwise OK. It's not the recent upgrade from Win 8 to 8.1 (5 days ago) because the colour selection facility was working yesterday. Any ideas.

I'd say things sound desperate enough to try resetting Preferences
Reset Preferences
Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
Mac — Hold down Shift Cmd Opt immediately after starting Photoshop
If that fails, we need to know your operating system?
Do you have a full CC subscription, or by apps do you mean Photoshop, Bridge and Lightroom?
Another other information that might pertain ?

While using Illustrator or Photoshop I seem to be hitting a shortcut to lock my key board. Other shortcuts work but can not type anything?

While using Illustrator or Photoshop I seem to be hitting a shortcut to lock my key board. Other shortcuts work but can not type anything?

You are planning to do a number of things, so let me first make a suggestion about the overall approach. Instead of: "Before I make a clone of my hard drive I would like to fix this problem so I only have one account with everything in it but I do not know what to move ... or how to safely move it", I would make that clone immediately. And leave it alone until you have completed the reconfiguring and rearrangements you plan to do. This way, if you accidentally do something that needs to be undone, your clone is there with all the originals. By the way, this is the approach I always adopt, whenever I have to do anything drastic with an existing installation.
After all the rearranging etc. of the main drive you just make a new clone that erases the previous one.
The "Deano" account doesn't show up when I go to System Preferences:Accounts. So I assume I must have done something wrong.
This would suggest to me there is only one account, i.e. the principal, or Admin account. Why do you think there is a second account?
Where should I keep all my work files?
You can keep them where ever it is most convenient. As you know, you can create folders within folders, and there is nothing special about the Documents folder. Feel free to ignore it, if that's the way you want to work. You can direct your downloads, the default "save to" locations etc. to the appropriate places, as you work.
Can I create a new place for all my work files and just move them? I know I will have to update linked files within the various software packages but this is not a problem.
By all means.
.. can it be directly on the HD like my Applications folder etc.?
Indeed, yes. Or even on a different hard drive (or partition of the same drive).
And best wishes for the new year, to you too.

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Iphone 6 plus fingerprint is not working while charging

My iphone 6 plus fingerprint scan is not working while charging. Is this normal?
I tried my iphone 5s and it works just fine even while charging.

I think I got an answer to my own question
If you're using generic lightning cable (non-original lighting cable), the fingerprint scan doesn't work while charging.
I just find it weird as my iphone 5s works even if i'm not using the original lightning cable though.

Step backward hotkey not working while using brush tool? - Photoshop CC 2014

Similar Messages

Maybe you are looking for