Step by step 11g manual upgrade notes at metalink

any body know # of this notes?

10.2.0.X.0 TO 11.1.0.6.0
1. Install 11.1.0.6.0 software
The software can be downloaded from the following link : http://www.oracle.com/technology/software/products/database/index.html
Note 169706.1 : Oracle® Database Installation and Configuration Requirements Quick Reference (8.0.5 to 11.1)
2. Upgrade the database to 11.1.0.6.0
Note 419550.1 : Different Upgrade Methods For Upgrading Your Database
Note 429825.1 : Complete Checklist for Manual Upgrades to 11gR1
REFERENCE:
Availability and Known issues for 11.1.0.6 Note 454506.1
10.2.0.X.0 TO 11.1.0.7.0
1. Install 11.1.0.6.0 software
The software can be downloaded from the following link :
http://www.oracle.com/technology/software/products/database/index.html
Note 169706.1 : Oracle® Database Installation and Configuration Requirements Quick Reference (8.0.5 to 11.1)
2. Install the 11.1.0.7.0 patchset on top of the 11.1.0.6.0 ORACLE_HOME
Patchset number is : 6890831
http://updates.oracle.com/download/6890831.html
3. Upgrade the database to 11.1.0.7.0
Note 419550.1 : Different Upgrade Methods For Upgrading Your Database
Note 429825.1 Complete Checklist for Manual Upgrades to 11gR1
REFERENCE:
Availability and Known issues for 11.1.0.7 Note 738538.1
I hope you finished your search here..

Similar Messages

Question on 11g Manual Upgrade (Step #33)

In the Note 837570.1 - Complete Checklist for Manual Upgrades to 11gR2 (Doc ID 837570.1), under Step #33
Step 33
Upgrade Statistics Tables Created by the DBMS_STATS Package
If you created statistics tables using the DBMS_STATS.CREATE_STAT_TABLE procedure, then upgrade these tables by executing the following procedure:
EXECUTE DBMS_STATS.UPGRADE_STAT_TABLE('SYS','dictstattab');
In the example, 'SYS' is the owner of the statistics table and 'dictstattab' is the name of the statistics table. Execute this procedure for each statistics table.
How do we know which tables were previously created with DBMS_STATS.CREATE_STAT_TABLE prior to upgrade?”
Thank you very much.

Hello and welcome to the forums.
The statistics tables created by DBMS_STATS, are used for exporting/importing statistics, these tables are not used by the optimizer. So if you are not planning to import statistics, you don't need to find (and update) these tables.
Anyway, stats tables have a basic table structure and can be found by the following query:
SELECT OWNER, TABLE_NAME FROM DBA_TAB_COLUMNS WHERE
COLUMN_NAME = 'STATID' AND DATA_TYPE= 'VARCHAR2' AND DATA_LENGTH=30Check if the listed tables have also these columns:
Name                                      Null?    Type
STATID                                             VARCHAR2(90)
TYPE                                               CHAR(3)
VERSION                                            NUMBER
FLAGS                                              NUMBER
C1                                                 VARCHAR2(90)
C2                                                 VARCHAR2(90)
C3                                                 VARCHAR2(90)
C4                                                 VARCHAR2(90)
C5                                                 VARCHAR2(90)
N1                                                 NUMBER
N2                                                 NUMBER
N3                                                 NUMBER
N4                                                 NUMBER
N5                                                 NUMBER
N6                                                 NUMBER
N7                                                 NUMBER
N8                                                 NUMBER
N9                                                 NUMBER
N10                                                NUMBER
N11                                                NUMBER
N12                                                NUMBER
D1                                                 DATE
R1                                                 RAW(32)
R2                                                 RAW(32)
CH1                                                VARCHAR2(3000)Regards
Gokhan Atil

Catproc invalid after catupgrd --- 11g Manual Upgrade

Hi All,
I hv upgraded database from 9i to 11g.
After upgrade i checked
select comp_id,status,version from dba_registry;
CATPROC shows me INVALID.
Waiting for your reply
Thanks in advance

user9161658 wrote:
HI,
I tried but now it shows me catproc,catalog invalid.
i shutdown & startup with upgrade.
ran @?/rdbms/admin/utlrp.sql
even now it showing me
catalog
catproc invalid
Regards,There should be a log file from the steps that you ran. That should point you to the original error. You'll likely need to correct that first before proceeding with rerunning your manual upgrade. Assuming that you have a support contract then the best advice would be to contact them. If you don't you essentially have 2 options now.
1) Restore the backup you took of the 9i database, determine the cause of the upgrade failure, correct for it, and repeat the upgrade.
2) determine the cause of the upgrade failure, correct for it and resume your current upgrade - likely means rerunning catupgrd.sql again.
Niall Litchfield
http://www.orawin.info/

Step by step procedure for Upgrade to ECC6.0

Hi,
I gained a lot from this forum . Can someone please mail me at
[email protected]
step by step procedure for upgrade .
Will award full points for helpful documents..
With regards,
Mrinal

SAP defined a roadmap for upgrade.
1) Project Preparation
Analyze the actual situation
Define the objectives
Create the project plan
Carry out organizational preparation for example identify the project team
2)Upgrade Blueprint
The system and components affected
The mapped business processes
The requirements regarding business data
3)Upgrade Realization -- In this phase the solution described in the design phase is implemented in a test environment. This creates a pilot system landscape, in which the processes and all their interfaces can be mapped individually and tested on the functional basis.
4)Final Preparation for Cutover -- Testing, Training, Minimizing upgrade risks, Detailed upgrade planning
5)Production Cutover and Support
The production solution upgrade
Startup of the solutions in the new release
Post processing activities
Solving typical problems during the initial operation phase.
SAP expects at least 2 to 3 months for Upgrade and that again depends on project scope and complexity and various other factors.
STEPS IN TECHNICAL UPGRADE
     Basis Team will do the prepare activities. (UNIX, BASIS, DBA).
     Developer need to run the Transaction SPDD which provides the details of SAP Standard Dictionary objects that have been modified by the client. Users need to take a decision to keep the changes or revert back to the SAP Standard Structure. More often decision is to keep the change. This is mandatory activity in upgrade and avoids data loses in new system.
     After completing SPDD transaction, we need to run SPAU Transaction to get the list of Standard SAP programs that have been modified. This activity can be done in phases even after the upgrade. Generally this will be done in same go so that your testing results are consistent and have more confident in upgrade.
     Run SPUMG Transaction for Unicode Conversion in non-Unicode system. SPUM4 in 4.6c.
     Then we need to move Z/Y Objects. Need to do Extended programming check, SQL trace, Unit testing, Integration testing, Final testing, Regression Testing, Acceptance Testing etc.,
The main Category of Objects that needs to be Upgraded is
     Includes
     Function Groups / Function Modules
     Programs / Reports
     OSS Notes
     SAP Repository Objects
     SAP Data Dictionary Objects
     Domains, Data Elements
     Tables, Structures and Views
     Module Pools, Sub Routine pools
     BDC Programs
     Print Programs
     SAP Scripts, Screens
     User Exits
Also refer to the links -
http://service.sap.com
http://solutionbrowser.erp.sap.fmpmedia.com/
http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
http://www.id.unizh.ch/dl/sw/sap/upgrade/Master_Guide_Enh_Package_2005_1.pdf
Hope this helps you.

Steps required to upgrade to java 1.6.0_27.

Can anyone please tell me or help me to as what are the steps required to upgrade to java 1.6.0_27 ??
EBS R12.0.3

Hi
Helios
You need windows one, please see upper metalink note which is mention by Hussein Sawwan already
Step 1.2. Download the JRE Plug-in
Step 2. Rename the JRE Plug-in and Place it on Web Application Tier So the files mentioned in the link [http://www.oracle.com/technetwork/java/javase/downloads/jre-6u27-download-440425.html]
Linux x86 - RPM Installer     20.10 MB      jre-6u27-linux-i586-rpm.bin
Linux x86 - Self Extracting Installer     20.63 MB      jre-6u27-linux-i586.bin
Linux x64 - RPM Installer     19.67 MB      jre-6u27-linux-x64-rpm.bin
Linux x64 - Self Extracting Installer     20.25 MB      jre-6u27-linux-x64.bin
Solaris x86 - Self Extracting Binary     20.27 MB      jre-6u27-solaris-i586.sh
Solaris SPARC - Self Extracting Binary     25.10 MB      jre-6u27-solaris-sparc.sh
Solaris SPARC 64-bit - Self Extracting Binary     11.19 MB      jre-6u27-solaris-sparcv9.sh
Solaris x64 - Self Extracting Binary     7.48 MB      jre-6u27-solaris-x64.sh
These are used when I am accessing R12 application from linux/solaris platform... for accessing R12 with new JRE plugin on windows platform i need Windows x86 Offlin -> jre-6u27-windows-i586.exe
Please correct me...all these are new to me, so silly questions pop up

I just did a software update that was apparently for iPhoto. When I try to open iPhoto it stops at "step 5" and will not go further. what do I do?

I just did a software update that was apparently for iPhoto. When I try to open iPhoto it stops at "step 5" and will not go further. what do I do?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

When I sync my phone it gets to step 6 the does not complete the sync i get a message that says itunes has stopped working and needs to close anyone else have this issue

When I sync my phone it gets to step 6 the does not complete the sync i get a message that says itunes has stopped working and needs to close anyone else have this issue

The same problem here!... My itunes stucks on "preparing to sync" when sync my ipad 2, and stucks on iphone 4 calendar sync...
Any solution?? Need help, please!!
Macbook pro 13 i7
Iphone 4
Ipad 2
Thanks!!!

HT2534 In the step #10, I have not the "None" option. What can I do?

In the step #10, I have not the "None" option. What can I do?

This is how I discovered and solved my problem!
None option will be visible only when you pretend to download a free app and select create new Apple ID.
1- Pretend to down a free apps from iTunes Store
2- Create new ID (make sure you have new email also)
3- None payment type will be surely visible
4. Click, fill in information and continue and finish
Hope that help!!!

Step input, chord mode not working?

Hello Gurus!
I'm using Logic with a midi Keyboard and the Step Input Windows and I have a small but significant difference between the two:
When I use Step Input Windows with chord mode selected the playhead correctly doesn't move if I hit more note on the Step Input Windows but If i input the notes with the midi keyboard (with the chord mode on) it moves!
I tried also with the musical Typing windows and the Keyboard windows, same result. Chord mode seems to work only with Step Input Windows as note entry tool.
Is something wrong here or is only me?
To me is illogical this behavior, if chord mode is selected the playhead should not move, indipendently on what tools one use to insert the notes.
Any help is appreciated!
Thanks
Mac Book Pro I7, 16GB, OSX 10.10.3 / Logic Pro X 10.1.1

Add this And check it,
stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;

Step type section is not visible in workflow builder.

Hello Friends,
Step type section is not visible in workflow builder even though I am in change mode. How to make it visible.
Cheers,
Senthil

Hi,
I in workflow builder ucan see three dropdown box in the left side of your screen. In that the third listbox you click to get the Step Types..
thank You.

Lessons: Extend step 5 of 7 not working on Internet Explorer 11

Hello I using Edge Animation CC Trial, I starting to learn directly from application. Everything is good until I found out Lesson: Extend step 5 of 7 not working on Internet Explorer 11 (Lasted version on Windows 8.1). The Playback/Stop trigger not work for Stage. But when I try use Chrome, it working well.

Oh and just to show how things look like with the problem, it's like this:
And this is what it's supposed to look like:
So yeah, the whole space just turns empty - I can still click on blank spaces and it leads me to the appropriate links (though I have no clue what links I am actually clicking on in IE9, it only shows up for google chrome
I'm looking forward to constructive replies~ Hopefully someone would see this soon

Role of spau and spdd and steps to starup upgrade

hi all
i want to know about the steps to start upgradation and role and at what stage sapu and spdd come in scene.
Thanks.

T.code SPAU and SPDD are used for adjusting Standard Objects.
1) SPDD: This is for data dictionary corrections.
This is mostly done by BASIS people .
2) SPAU: This is for repository objects (programs, functions, classes, etc.).
This is done by an ABAPer
In this Transaction for all Objects you will be doing a version Comparsion.
If you find any changes are done by the Customer in the Standard u will be Carry forwarding those changes in the new sytem which you are upgrading by ADOPTING MODIFICATIONS.
If you don't find any Customer Changes u will RESET TO ORIGINAL.
Edited by: vasanth kumar vikram prakash on Mar 6, 2008 10:25 AM

Error Code: -17601 "Attempted to load a module for a step whose module has not yet been specified"

I am trying to run my first Test Stand sequence, and am getting the following Error: "Error Code: -17601, Attempted to load a module for a step whose module has not yet been specified".
I have specified the correct module under the Test Stand "Action" properties, and am pointing to the right vi. I am not sure why it is giving me this error.

Hi Shoab,
So when you right click on your step and select Specify Module.... The Edit LabVIEW VI dialog will appear, in the VI Pathname control is your VI and under that control appear the full path to your VI, if it contains "(No File Specified)" then thats your problem. You will need to use the file browse control to find your VI.
Regards
Ray Farmer
Regards
Ray Farmer

Steps required to upgrade OS from snow leopard to yosemite

What are the steps required to upgrade from Snow Leopard to Yosemite

Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite - System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

Have followed the steps but still could not convert my Pdf to Word

Have followed the steps but still could not convert Pdf to Word

You need to update it from iTunes on a computer.
(73555)

Step by step 11g manual upgrade notes at metalink

Similar Messages

Maybe you are looking for