Step by step article for connecting XP to Airport
Say, does anyone know where there's an article or post that gives step by step instructions on how to configure XP Pro to connect to an Airport wireless network while in Boot Camp? The good folks at Microsoft have made it fairly difficult and non-intuitive.
Thanks...
iFelix has it covered over in the Airport sect I think...
http://discussions.apple.com/thread.jspa?messageID=2668708�
And maybe Airport for Windows.
Similar Messages
-
How can I convert a coaxial internet feed to an ethernet for connection to an AirPort Extreme?
I'm interested in purchasing an AirPort Extreme but I'm not sure how to convert the coaxial internet cable to ethernet to connect to the airport. Does anybody know of a good converter?
If the Internet feed is provided by your Internet Service Provider (ISP) you will need an outboard cable modem that accepts the coaxial signal and converts it to Ethernet for use with the AirPort Extreme.
Contact your Internet Service Provider to learn what modem they recommend for use with their service. -
Went through this step-by-step, but alas it did not solve the problem. For some reason I can download mail on my Macbook Pro and iPhone, but no my iMac. Connection Doctor shows all green lights. This started today when I was prompted to re-enter incoming mail server passwords. I re-entered passowrds yet again to make sure they were correct. Rebuilt the inBox. Connection Doctor continues to show all green lights, but am still unable to download mail to the inbox. Has anyone else ever run into this problem?
I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.
-
Step-by-Step Guide for connecting CRM with SAP R/3 system Server
Hi Experts,
For my ongoing project , I am in the need of connecting the CRM server with
SD server.
Can u share any Step- By Step guide for doing that.
I know that the RFC connection has to be established between the system.
Logical system must be create and all such stuffs.
It is definitly helpful, If u can help me out.
I would to thank, appreciate and reward for your help
Best Regards,
ManiprabuHi Mani,
Follow the following steps :
1. Create RFC destination for both the systems on CRM and R/3 in SM59.
2. Create the logical systems and assign clients to logical system in SALE transaction both on CRM and R/3.
3. Create a user in the R/3 table CRMCONSUM with the name CRM.
4. Maintain the Middlware Parameter tables on CRM : Table SMOFPARSFA:
Create an entry for following parameter entry:
Key - R3A_COMMON
Para name - CRM_DEFAULT_DESTINATION
Value - R/3 logical system
5. Maintain the parameter tables on R/3 system : CRMRFCPAR, CRMPAROLTP
CRMRFCPAR :
Create new entry with following data:
User - CRM
Object name - *
RFC Destination - RFC destination for CRM
Load types - All Load Types
In Queue flag - X
Send XML No XML
CRMPAROLTP :
Create the following parameter entry:
Para name - CRM_DEFAULT_DESTINATION
User - CRM
Value - Name of the CRM logical system
6. Create Sites and attach subscriptions in Admin Console : Tcode SMOEAC
Create a Site as CRM and another as R/3. Attach the required subscriptions to the R/3 site.
7. Register the queues in SMQR and SMQS transactions.
PS : For detailed steps refer the Middlware Base Customizings(CR500 and CR100)
<b>Reward points if it helps.</b> -
BAPI step by step to connect JAVA for catsdb table
BAPI step by step to connect JAVA for catsdb table,
Points will be rewarded,
full points with example of catsdb table in bapi for JCO JAVA
Thank you,
Regards,
Jagrut BharatKumar ShuklaHi,
Check the thread..
https://forums.sdn.sap.com/click.jspa?searchID=3587428&messageID=3647918
Regards,
Omkar. -
I have had my I phone 4 for almost a year now. I am not sure how to sync my phone to the Computer to save my contents and how to update my phone. Do I just connect my phone to the Computer and it will automatically update and save or is there a step by step to complete?
You should have beeen syncing regularly.
iPhone User Guide (For iOS 5.1 Software) -
I have a mac pro 10.6.8 and need to migrate everything to the imac with OS lion. I see articles for migration form 10.6 to OS lion but not 10.6.8 -
Anyone have a link or a step by step guide so I can do this correctly?See Pondini's Setup New Mac guide.
-
Setup steps for connecting BW to CRM
Hi,
Could somebody please let me know the setup steps for connecting BW and CRM.
Thanking you in advance,
DhanabalYou can also find the steps to connect BW to CRM in Best Practise
cheers
mkr -
STEP BY STEP Configuration require for setup SLD Connections
hi I have installed the sneak preview 7.0 netweaver.
I would like to set up the SLD connection for R/3 system.
kindly provide the step by step configurations requied to set upd the SLd connection to R/3 server
Regards
VijayHi,
Refer to this document - [SLD Configuration guide for SAP NW7.0|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50924080-0627-2a10-2b89-8cb87b972fb1]
For more info on SLD refer to this link - [SLD|System Landscape Directory (SLD)]
Regards
Srikanth KV -
Step by Step Instructions for Installing Self Signed Certificate using Certificate Modification Tool
I am looking for some step by step instructions for installing the self signed certificate from my Microsoft SBS 2003 server on a Treo 755p and 750p. In particular I need some help with the form of the actual certificate and how to use the Certificate Modification tool.
Some questions I have are as follows:
1. When I install the certificate on a Windows Mobile device I used an exported version of the certificate. This export is done using the DER x.509 format. Is that the same form I’ll need for the Palm? Do I need some other form? Can/should I just use sbscert.cer file that is generated when SBS is configured?
2. Does the self signed cert need to be installed on the computer being used to update the Palm or do we just need to be able to access the appropriate .CER file?
3. There are three things included in the PalmCertificatesTool.zip file:
Trusted CAs (folder)
Cert2pdb.exe
PalmCertificates.exe
How do I use these tools?
4. It looks like the PalmCertificates.exe file opens an interface that will allow me to browse to the desired .CER file. Then I suppose I use the < Generate PDB > to create something that needs to then be uploaded to the Palm device? Not having any real experience with a Palm device how do I upload and install this file?
5. Once uploaded do I do something on the device to install it?
If there is some white paper that provides step by step instructions on doing this that would be great.
Thanks,
Walt Bell
Post relates to: Treo 755p (Verizon)
Post relates to: Treo 755p (Verizon)Thanks for that.
I have one question after reading the article 43375:
The article has you "Turn of AutoSync" and then "Reset the device". It then indicates the device should be left idle.
The next step relates to running the PalmCertificates.exe, navigate to the certificate file and add it and then run the < Generate PDB > button. Should the device be connected to the computer during this process? If so, at what point after the reset do you connect it to the computer?
Thanks!
Post relates to: Treo 755p (Verizon) -
Apple TV will no not connect to iTunes. I need step by step info.
My Apple TV will not connect to iTunes? I need step by step instructions to try and fix this.
Hello there, Canuckam2.
The following Knowledge Base article offers up some great step-by-step instruction on troubleshooting your issue:
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
SSIS - Make a "dynamic" database connection tutorial (step-by-step) ?
I want to make one connection ONLY to loop over a list of servers. This connection should be able to connect to databases located on different servers ie different IP addresses. After connecting to a database, it should run some SQL code. The result set
of this code should be transferred to a central database. After that, it should do the same for another server.
Can someone give me a step by step tutorial to do this ? I want hand holding/spoon feeding tutorial because no tutorial on the net worked for me so far.
Tutorials i tried , but did not work -
http://www.rafael-salas.com/2010/01/ssis-loop-through-multiple-database.html
http://www.codeproject.com/Articles/14341/Using-the-Foreach-ADO-Enumerator-in-SSIS
and many others which i cannot even remember. NONE of them are step by step. I have also not found a SINGLE book which covers this. All books only loop through files, but not through remote databases.
I need your help.
ThanksPlease see if these help -
http://www.sanssql.com/2011/08/looping-through-sql-servers-using-ssis.html
https://www.simple-talk.com/sql/ssis/consolidating-sql-server-error-logs-from-multiple-instances-using-ssis/
http://sql-ution.com/dba-repository-create-the-server-list/
- Aalam | (Blog)
1st one not good. Many steps are missing. Cannot understand than one. Will try the others also. -
Step by step complete setup for WRT54G ver.6 with Laptop and XBOX 360
Hello. I am sorry to post this, I am sure it is a juevenile and redundent question...but I have tried to look for the set up cd (I can find where to download it...though I can find the firmware upgrade or whatever). My friend at work said it would do all the setup pretty much automatically for me.
I somewhat know computers, but you might go ahead and make your replies VERY lamen's terms or I might not be able to follow. Anyways, what I need, is a step by step/screen by screen directions for a secure network. I have made a partial attempt at setting it up and it technically works, but I would feel better if I did the steps a-z in order, so I know that it is done correctly. I also am not totally confident in its security as it is now. (Also, technically, I did not check the XBOX again after getting the new laptop, I am just assuming it is still working because it was before).
My problem is I can't seem to find very good directions for setting up the router...I only find partials or confusing directions.
So here are the things I am trying to connect:
Liksys WRT54G ver. 6
Gateway Laptop running Windows Vista
XBOX 360 - WIRED
(I had a PC and a laptop, but they both died at the same time and I have only been able to replace the laptop at this point...the PC will come later and not sure at this point if it will be Wired or not).
I have a cable Modem between the Router and the wall...I didn't look at that for brand/etc...but I can get it ASAP if needed.
Here are the settings that I have so far:
Changed the Router Name
Changed the SSID
Have DHCP set to 3 (XBOX, PC, Laptop)
Wireless SSID Broadcast: Disable
Username and Password changed to my own info
UPnP: Enable
I may have changed other things without knowing it. So like I said, a complete, step by step screen by screen set up would be totally appreciated. I haven't done anything in the security tab, all that is totally foreign to me, so I am just not broadcasting for now until I can get some help setting things up with you guys.
And if someone is familiar with the Laptop/XBOX 360 setup, and I need to change any of the settings on the XBOX itself, could you please include that in your directions? I know that isn't technically what THIS forum is for, but it would sure be helpful to me if you happen to know both parts anyways.
Thanks a lot (in advance)!So all you just need to do is, secure your Wireless Network. Follow the setps bellow and change the settings on your Router.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Now see if you can locate your Wireless Network and attempt to connect...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect... -
How do I sync my new ipad mini with my old ipad 2, without losing any apps or data in notes? I need step by step instructions for first-time sync with ipad mini. Thanks.
If you synced it many times, you have to have a backup. It's just a question of how old that backup is now. When did you last sync?
First of all launch iTunes on your computer and go to Edit>Preferences>Devices. Do you see any backups for you iPad in that window? If so, how new is the newest backup? That will be the backup that you will want to use. But remember that if you use that backup and it is one month old, you can only restore from that date back in time. Anything that you did on the iPad in the past month will not be in that backup.
Turn on the new iPad Minin and start activating OTA via WiFi. You will get to a certain point in the process where you will be given the choice to Set up as new, Restore from iCloud - or Restore from iTunes. You will want to select Restore from iTunes.
That is the short and sweet version. There are step by step instructions in this article. This applies to the mini as well as the iPad 4 or the iPad 3 for that matter.
http://www.everythingicafe.com/how-to-set-up-new-ipad/2012/03/16/ -
I have a WD My Passport for Mac. I have it into two partitions one formatted into Mac OS Extended (Journaled) and the other one formatted into exFat. I don't really know where to go from there. I would love it if somebody could help me with a step by step process.
Have you connected the WD external HDD to your MBA with the USB cable? It should be displayed on your desktop. If not, check the settings in Finder Preferences.
Once it is connected, click on the icon and a window will open showing what ever data you have on it. The same procedures apply as with the internal storage of the MBA.
Some WD HDDs come with their own software which may create unnecessary problems with your OSX. You may have to get rid of that.
Ciao.
Maybe you are looking for
-
RequestTimeOut error while invoking BPEL Process
Hi, I am getting RequestTimeoutException error while invoking a BPEL process using this code: Locator locator = LocatorFactory.createLocator(jndiProps); String compositeDN = "default/"+processName+"!1.0"; Composite composite = locator.lookupComposite
-
If I put my 7300 in slot4 at 8x, and a 8800GT at slot1, 16x, could I boot 10.4.11 on my mac pro 1,1 if I unplug the monitor from the 8800GT? I have different os's installed on my different hard drives. I'm using 10.6.8 now, but I go back to 10.5.8 an
-
Render framemaker files in Documentum Content Server to pdf
Is there a third party tool available which can communicate with Documentum Document transformation service to convert a framemaker file or book to pdf?
-
Preview problem in Photoshop CS4
When I open a folder in CS4, I get no preview. I'm running a mac with 4gigs of RAM on Snow Leopard 10.6.8. Do I need to upgrade just to get preview? Why aren't there any forums left for Photoshop CS4?
-
When building a Photo page, the "Help" menu says a visitor can select the Slideshow feature to view the photographs. I understand the feature, but I cannot find or figure out how to select the music and other features such as type and length of disso