Step by step complete setup for WRT54G ver.6 with Laptop and XBOX 360

Hello. I am sorry to post this, I am sure it is a juevenile and redundent question...but I have tried to look for the set up cd (I can find where to download it...though I can find the firmware upgrade or whatever). My friend at work said it would do all the setup pretty much automatically for me.
I somewhat know computers, but you might go ahead and make your replies VERY lamen's terms or I might not be able to follow. Anyways, what I need, is a step by step/screen by screen directions for a secure network. I have made a partial attempt at setting it up and it technically works, but I would feel better if I did the steps a-z in order, so I know that it is done correctly. I also am not totally confident in its security as it is now. (Also, technically, I did not check the XBOX again after getting the new laptop, I am just assuming it is still working because it was before).
My problem is I can't seem to find very good directions for setting up the router...I only find partials or confusing directions.
So here are the things I am trying to connect:
Liksys WRT54G ver. 6
Gateway Laptop running Windows Vista
XBOX 360 - WIRED
(I had a PC and a laptop, but they both died at the same time and I have only been able to replace the laptop at this point...the PC will come later and not sure at this point if it will be Wired or not).
I have a cable Modem between the Router and the wall...I didn't look at that for brand/etc...but I can get it ASAP if needed.
Here are the settings that I have so far:
Changed the Router Name
Changed the SSID
Have DHCP set to 3 (XBOX, PC, Laptop)
Wireless SSID Broadcast: Disable
Username and Password changed to my own info
UPnP: Enable
I may have changed other things without knowing it. So like I said, a complete, step by step screen by screen set up would be totally appreciated. I haven't done anything in the security tab, all that is totally foreign to me, so I am just not broadcasting for now until I can get some help setting things up with you guys.
And if someone is familiar with the Laptop/XBOX 360 setup, and I need to change any of the settings on the XBOX itself, could you please include that in your directions? I know that isn't technically what THIS forum is for, but it would sure be helpful to me if you happen to know both parts anyways.
Thanks a lot (in advance)!

So all you just need to do is, secure your Wireless Network. Follow the setps bellow and change the settings on your Router.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Now see if you can locate your Wireless Network and attempt to connect...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Similar Messages

Since I updated to latest software on ipad cannot sync. with computer. Makes it to step 7 however says 'waiting for changes to be applied' and never completes sync.

Since I updated to latest software on ipad cannot sync. with computer. Makes it to step 7 however says 'waiting for changes to be applied' and never completes sync.
thx for the help,
Tony

Hello Marcia,
Sorry you are having trouble syncing content with your iPhone 5. I found an article that might help with this syncing issue:
iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
http://support.apple.com/kb/TS3219
Also, you can delete the songs from the iPhone without syncing by just swiping from left to right over the song to get a delete button.
I hope this helps!
Best,
Sheila M.

Why there is no update for WRT54G Ver 7?

Why there is no update for WRT54G Ver 7? I can only see Ver 1, 1.1, 2, 3, 4, 5, 6, 8

hi Gavlin:
You would downknow the firmware of wrt54g v7 at the www.linksys.com.cn ,this is the chinese web .

WRT54G ver . 5 and AppleTV

I seem to be having an issue with multicast between the wired ports on a LinkSys WRT54G ver. 5 and an AppleTV which is on the wireless network. The Bonjour service, which I believe uses multicast, seems to not be able to cross the boundry from wired to wireless on the router.
For instance, I typically use an iPhone connected wirelessly to my WRT54G to control my AppleTV, also on the wireless network, but if I move the AppleTV to a wired port, the iPhone cannot see the AppleTV anymore even though both can go out to the internet via the cable modem plugged into the WRT54G.
Any ideas? I just updated to the most recent version of the firmware, 1.02.7

WRT54G v5 does not support WMM feature...I would suggest you to either go for N-Series router like WRT160N or upgrade the router with 3rd party firmware like dd-wrt.However upgrading the router with 3rd party firmware will void the warranty period of the router.

Can a iPad be setup for tethered shooting with a Nikon dslr

Can a iPad be setup for tethered shooting with a Nikon Camera

Not as a standalone solution if you want stuff like live view and all the camera controls on the iPad. If it's just for transferring photos to the iPad for immediate viewing after shooting the Shuttersnitch app comes to mind. Shuttersnitch however requires a WiFi connection that most Nikons don't happen to have. Nikon's wireless dongles for the consumer range of cameras are also somewhat awkward to use whereas the wireless/Ethernet units for the pro range happen to be very expensive. WiFi SD-cards are also a possibility for retrofitting WiFi but they tend to be unreliable, slow and their setup is quite often finicky.
Another solution would be tethering the camera to a laptop (Win or Mac) through USB and connecting the iPad as a secondary wireless tethering device to the computer. There are programs for Mac and Windows incorporating this feature. I once set this up for a friend who does a lot of studio work but it ended up that he just uses the USB-connected laptop almost exclusively. And unless one would be out for a timelapse shooting already carrying tons of gear not a solution for shooting in the field.
Last not least but also not exactly inexpensive is the Camranger remote control for Nikon and Canon DSLRs. It connects to the camera through USB and has its own server and WiFi built in which allows to connect to iOS, Android, Mac and Windows (apps for all available by Camranger themselves). Probably the most flexible and comfortable solution especially when considering that it can be used for multiple cameras and will mot likely also work with future cameras. More information can be found at http://www.camranger.com (I'm in no way affiliated with them and personally don't own a Camranger remote so I would advise some more web research on user experiences).

Just bought a 3TB Time Capsule for a small office. Will have 4 users with MacBooks. What would ne the best setup for time machine individual backups and internet sharing in a secure way?

Just bought a 3TB Time Capsule for a small office. Will have 4 users with MacBooks. What would ne the best setup for time machine individual backups and internet sharing in a secure way?

Set up each Mac for Time Machine backups in the normal way. Time Machine will keep each backup separate on the Time Capsule, so users will only be able to see the backups of their own Mac.
Yes....there are convoluted workarounds that might allow one user to see the backups of another.....IF...they know the administrator password of the "other" Mac.
As far as Internet sharing, all users will have access to the Internet if they have a wired or wireless connection. If a Mac connects using wireless, it is possible to limit the time that they are allowed to connect to the network.
For example, you might limit the ability to connect to the wireless from say each Weekday from 8 AM to 6 PM.
With a wired Ethernet connection, you cannot limit access times to the Internet.

Hello. It can be a iPhone4 accessories for the one with pictures and other things are transferred wirelessly to a TV? Thank you

Hello. It can be a iPhone4 accessories for the one with pictures and other things are transferred wirelessly to a TV? Thank you

You need an Apple TV to be able to wirelessly send pictures etc. from iPhone.
However you can buy an adapter if you want to connect to a TV
http://store.apple.com/us/product/MC953

Integration documentation for sap sd with fico and mm

hi Sappers,
I need Documentation for SAP SD with FICO and MM Module
its very urgent.
mail id : [email protected]

Some basic information :
FI-MM: The integration between FI-MM happens in T-code: OBYC
1. When PO is created :
No Entry -
2. When GR is posted
 Inventory Account dr (Transaction Key BSX in OBYC)
 To GRIR account (T.Key WRX in T-code OBYC)
3. When Invoice is posted
 GRIR account Dr.
 Vendor account Cr.
4. Payment made to Vendor
 Vendor A/c Dr
 To Bank Clearing A/c Cr.
Points to know : Movement Types, Assignment of Movement types to T-keys (T-code OMJJ), Value string (I also need some information on this) , OMWN and OMWB transactions.
There is a close integration b/w FI & MM, actually document flows from MM to FI in the following areas such as,
 1. Movement Types:
Used to enable the system to find the predefined posting rules determining how the accounts of financial accounting system are to be posted & to update the stock fields in the matrl master data.(Goods Receipt, Goods Issue, etc)
 2. Valuation Class:
Assignment of material to grp of gl account, used to determine the gl accounts that are updated as a result of goods movement.
3. Transaction/Event key:
Used to control the storage or filing of documents & assignment of documents.Used to differeniate b/w various transactions such as goods movement tht occur in inventory.
 4. Material Type:
Each material should assign mtrl type in mtrl master record used to update whether changes made in qty are updated in material master record & change in value also updated in stock account.
 FI-SD Integration:
The integration is done in T-code VKOA
 1. Sales Order Created
 -No Entry-
2. PGI done (Goods issue)
 Cost of Goods Sold Dr (Configured in OBYC GBB T-Key)
 To Inventory Account
 3. Billing document released to Accounting
 Customer Account Dr.
 To Sales Revenue Account (ERL T-key in Pricing procedure)
Note : The GL account is assigned to this ERL in VKOA
 4. Payment Received
 Bank Clearing A/c Dr
 Customer A/c Cr.
Points to Know : Good to understand the pricing procedure and how the different transaction keys are used like ERL, ERS etc

Laptop monitor choice for photo editing with lightroom and photoshop

Hi,
i'm going to buy a laptop, mostly for photo editing with lightroom and photoshop use.
I'm in trouble with the display choice.
One laptop has LG LP156WF4 or AUO B156HAN01 display, that should be very similar matte ips display with 55%-60% coverage of AdobeRGB. You can find a review in the "Display" section of these link : http://www.notebookcheck.net/Review-Clevo-W650SJ-Schenker-M504-Barebones-Notebook.114329.0 .html
The other laptop hasAU Optronics B156HW01 V.4 Matte 95%, that is a TN matte display with 95% coverage of AdobeRGB. You can find a review in these link (the display should be the green bar): http://www.anandtech.com/show/4649/mythlogic-pollux-1400-clevos-w150hr-tested/6
My question is: which one is better for photo editing with photoshop and lightroom?
Someone says that ips is better because of the fidelity of color reproduction, view angles and contrast.
Someone, on the other side, says that the TN 95% is better because of the gamut%.
Can you help me?
Thanks,
Marco Grechi

Macbook pro is out of budget
Hp assistance said that in italy they don't sell laptop with dreamcolor (i'll call again tomorrow to be sure ) but i think that it would be out of budget (max 2000 euro).
They said that the best solution for me is the zbook 15 g2 (2300 euro), but they DON'T know brand and model of the display and if i can have SSD + HD inside the zbook 15 g2.
The laptop with the lg panel costs 1500 euro. the question is; "i know that the lg display is not the best, but is it almost sufficient for my use?". In this way i may save 500/800 to buy a separated display later.
I have read that dell xps 15 and dell precision m3800 have great display, but they are glossy and very reflective. Is it a big handicap?
Do you know the 3k 15,6" display Panasonic VVX16T020G00 ? It should be a 8-bit display with 72%NTSC gamut ( http://www.panelook.com/VVX16T020G00_Panasonic_15.5_LCM_parameter_22014.html )
Do you sugget me a 3k display for photo editing?
Thanks

Wrt54g and xbox 360 wireless gaming adapter

First post here and I have a problem. The WRT54G has wirlelss disabled. It is connected to a WAP11B wireless access point which is connected in 802.11b mode to a laptop, Wii, xbox 360, iPhone. The router is connected to a dsl modem. Three wired ethernet computers are connected. And I am running WEP with 128, and I changed the SSID to something other than linksys.
I'd like to change to use the WRT54G as a wireless enabled connection. Then remove the WAP11B, and put a pcmcia 802.11g card in the laptop and connect the xbox360 with a microsoft xbox 360 wireless gaming adapter which should connect at 802.11g.
The problem is the xbox 360 displays a message that there are duplicate networks using my SSID. Is there someway to upgrade to 802.11g without getting that error message on the xbox 360? Let me know if there are any questions I can answer in order to more clearly explain the problem.
Thank you,
Jordan
Solved!
Go to Solution.

Did you try to change the SSID...If not change the Network SSID and try...

List the complete setup for a query in a report

Hi,
is there an easy way (ABAP report or something like that) to list the complete setup of a query. I mean, which filters are used in the general filter, which restricted key figures (with the applied restrictions), which formules (including the restricted key figures) etc.
Regards,
machiel

Hi Venkat Kodi,
If you want to use Jump Targets with R-R-I you have to explicitly create them using T.Code: RSBBS. Then select the Source Query /Source system / Target Report.
If you want to locate the Target Query already created for a particular query. In BEx Report, Right-Click and use Go to --> Target Query.
Hope this Helps,
Cheers,
Raj

Need 110-240V Power Supply for WRT54G Ver 8.0 12V 0.5A DC

Can anybody sell me a power supply for my WRT54G Ver 8 wireless router?
Need 110-240VAC to 12V 0.5A DC
If you cannot sell me this item, can you recommend an online vendor?
Thanks a lot.

I checked on the wireless routers adapter .. it shows ...
Ac Input 5V 2A Jack Type : BIG BARREL AC Input 110~120V

Problems with password for WRT54G ver. 6

I just bought the router today and when I run the disc that came with the router it prompts me to enter a password and I can't get past that part of the process. I follow the directions exactly and then it tells me to put in some password. It starts with five letters already there and I press enter but it still comes back to put in a password. I tried putting in admin and it didn't work as it just gave me back the same password screen.
When I have the router connected through my modem it says that my local area connection is actually connected but I can't do anything on the Internet. I was able to connect wirelessly on my laptop but still couldn't use the Internet. If anyone could help me figure out how to fix this that'd be swell.

Okay, I was able to now get to the router setup with 192.168.1.1 and I can advance past the password part, but when it attempts to connect to the Internet it tells me that my router can't recognize the Internet. When it gave me the advanced options about the connection it started with static IP and I put in the numbers that were the same under my local area connection, but when I tried to save those under the setup for the router it told me that the WAN and LAN addresses were the same. That's the problem I now face.

WRT54G ver 2 Mac and PC issues

I have...
a WRT54G ver 2, firmware v4.21.1 (latest available for this model),
two PC desktops wired (192.168.1.101) - second desktop not used much),
a PC laptop wireless (169.254.58.14),
a Mac Desktop wireless (192.168.1.104),
and 2 Mac Laptops (169.254.75.54) (169.254.254.36).
The problem is...
When one of the wireless computers is turned on it won't connect unless the router is powered down and back on. It will be fine until one of the other wireless computers are turned on and now it doesn't connect. It is possible to get them all simultaneously connecting, but difficult. It seems to be in the timing. I still haven’t nailed it down. Frustrating...
The questions...
Did I give enough information?
Can I do what I want with this router or do I need to upgrade?
If can do, what settings?
If can't, new hardware recommendations?
Thanx

castor wrote:
okay... go to www.linksys.com/download and download the latest firmware for the router, try upgrading/reflashing firmware on the router...after reflashing/upgrading firmware on the router reset it and reconfigure it according to ISP settings...on the router's setup page click on wireless tab and try changing channel to 11, click on advanced wireless settings, reduce beacon interval to 50, fragmentation and RTS threshold to 2304, also transmission rate to 54Mbps and save the settings...power cycle the entire network and check whether it works or not and let me know.
Thanks! I had already downloaded and installed the latest firmware, but it didn't really help. I set the parameters you described, and bam, all wireless devices work. I shut down and restarted each one to verify, and they can access the network!
Again, Thanks a lot!

Actual and complete instructions for burning CD with info?

I am trying to find actual and complete instructions for the following. My goal is to have copies of my iTunes songs on my PC in mp3 format WITH the song information intact. This much I have figured out: I can burn an audio CD of my songs and then import the CD into iTunes as mp3 files. Great. The problem is that the song titles, artist, and album information are NOT getting onto the CD and NOT into the mp3 files that are coming into my library.
I have checked the box on the burn CD settings for keeping the CD text, which is the only thing I have found that remotely resembles a command to keep the song info.
I have looked all over to find thorough instructions for doing what I need to do but cannot find any. Can anyone provide step-by-step instructions that will accomplish what I aim to do? Thank you.
I have both Vista and Windows7 available. I've tried both. I am using iTunes 10.

Hmm. I am not sure that this helps, but maybe I don't get something. To clarify, the files from which I am starting are iTunes format. I need to change them into mp3. It is my understanding that if I can get iTunes to think it is importing the songs from an audio CD, it will give me the option to save them as mp3 files. If I simply copy the files (i.e. data CD or memory stick) I will just have the original file format and iTunes will not give me the option to make them into mp3 files when I go to import them again.
Does this clarify? My end game IS to get mp3 files WITH the song information. I would like to do this with iTunes and not get a third party software.

Step by step complete setup for WRT54G ver.6 with Laptop and XBOX 360

Similar Messages

Maybe you are looking for