Step-by-step Configuration of weblogic 9 as SAML token generator

Hi all,
Is there a online help where i can find a step by step guide to configure weblogic 9 as SAML token Source site?
http://e-docs.bea.com/wls/docs91/secmanage/saml.html
and http://e-docs.bea.com/wls/docs91/secintro/concepts.html and http://e-docs.bea.com/wls/docs91/secintro/archtect.html didnt help me much. It didnt explain the meaning of all the input fields in the admin console which are needed to configure weblogic as saml token generator.
Peace

I'm having the same issues - have you figured this out or received assistance?

Similar Messages

  • Step-by-step custom Credential Mapping using weblogic 10.3 SSPI

    Folks,
    I am trying to implement custom Credential Mapping using weblogic 10.3 SSPI. Am sure that few of you have already implemented the same. But here my questions in reagrds with the implementation
    Right now, I have below
    1.MyCredentialMapperImpl implements CredentialMapperV2
    1.Overridden getCredential and gerCredentials method.But I am not sure what are all the other methods , I should implement here.
    2.MyCredentialMapperProviderImpl implements CredentialProviderV2
    Questions.
    1.How to get ContextHandler to pass as param in MyCredentialMapperImpl -->gerCredentials method.
    2.Should I need set up a database after deploying the MBean ?
    3.How do I execute above implementation ?
    4.Can I see the SAML Token in my client ?
    If possible Please send me the step-by-step custom Credential Mapping implementation.
    Thanks in advance.
    Ravi

    Hi John,
    I would like magic of course. However, in this case I want something special: my authentication provider uses special means and contents of headers, cookies and service from external identity management systems to determine the user's identity.
    I do not want the application to present the login dialog! I want to derive the identity and the fact that the user is logged in from whatever the authentication provider returns in terms of Subject.
    Ideally, the flow is something like:
    - user accesses an unprotected resource - resource is shown, no interaction with authentication provider
    - user presses a link or button that takes him/her to a protected resource
    - the authentication provider is contacted to work with the identity asserter to establish the identity of the current user and create a subject object for this user
    - the application can access the subject and principals
    - ADF Security recognizes the identity and the roles (based on the principals) and coordinates access based on this.
    the authentication method is client certificate. presumably this prompts WebLogic/OPS to use an identity asserter to work with custom headers and cookies ("... when you configure a web application to use CLIENT-CERT authentication. In this case, WebLogic can perform identity assertion based on values from request headers and cookies. If the header name or cookie name matches the active token type for the provider, the value is passed to the provider."). No login form should be presented to the user, as all information required to perform the authentication is already available.
    I am trying to understand what I must do to have the ADF application adopt the subject set by the authentication provider - if anything?!
    If you more ideas to share - I would love to hear them.
    best regards,
    Lucas

  • What are the steps involved in configuring Oracle EBSR12 after installation

    What are the steps involved in configuring Oracle EBS R12 after installation is complete?
    We have an empty oracle EBS R12 installed and up and running. We do not have anything configured.
    Please direct me to the documents that can be followed to do initial steps for the application functionality to work.
    Thanks,
    SR

    What are the steps involved in configuring Oracle EBS R12 after installation is complete?
    We have an empty oracle EBS R12 installed and up and running. We do not have anything configured.
    Please direct me to the documents that can be followed to do initial steps for the application functionality to work.All Oracle EBS Docs 11i/R12 can be found at:
    Oracle Applications Documentation
    http://www.oracle.com/technetwork/documentation/applications-167706.html
    Thanks,
    Hussein

  • Errors in few of the step while running configuration wizard for PI 7.0

    hi all,
    i have installed Netweaver 2004s (PI 7.0) quality. during installation i had chosen sld option to be my development system as i wanted to use just single SLD.
    now for the post installation steps i had run Configuration wizard. i haven't yet implemented Note : 939592 : PI Usage configuration versus Central SLD as it says first i need to perform all CTC steps.
    now in this i got error in few steps:
    STEP1 : PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage
    the error was: CIM_ERR_FAILED: Object manager is not activated
    PI_05_This wizard will configure the integration server for sld.
    The error was:
    Error: CIM_ERR_FAILED: User credentials are invalid or user is denied access
    PI_09_This wizard will configure Role of Integration server
    Not able to load function SXMB_SET_ROLE_TO_IS( Connect to SAP gateway failed).
    What should i do?
    Regards,
    Priyanshu Srivastava

    Hi Priyanshu,
    "Object manager is not activated" simply means, that the SLD server is not started. So, please, first of all navigate to the SLD URL http://<host>:<httpport>/sld, login with an administrative SLD user -> Admininstration and push the star button.
    Regards,
    Blanca

  • How To Configure Or Intialize Portal Installed With BI7.0 -  Step By Step

    Hello Gurus
    How do I configure or start working on portals which is installed as part of BI 7.0 installation that is  EP and EP Core(Includes BI-JAVA and ABAP Stacks).
    Please help me out with possible guidance(if possible Step by Step procedure) how to set up the parameters and at which locations in BI.. I have kept couple of days exploring this site, but I couldnt fine one answer relating.
    More over the answers I could find was "To configure technical content, business content and bi admin cockpit,"  Any help or suggestion provided is grealy appreciated and points will be awarded accrodingly.
    Thanking you all gurus in advance,
    Regards,
    Parvez.

    Dear,
    Try these links:
    http://help.sap.com/bp_epv170/EP_US/BBLibrary/Documentation/N00_BB_Essential_Information_EN_US.doc
    http://help.sap.com/saphelp_nw04/helpdata/en/7f/5bfc3f8fc2c542e10000000a1550b0/content.htm
    https://websmp102.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TEP12&COLLECTION=43&LANGUAGE=EN
    http://sapport.blogspot.com/2008/03/business-intelligence-java-components.html
    /people/srinivas.gv/blog/2005/11/28/role-and-configuration-of-isolation-methods-in-sap-enterprise-portal
    /people/julia.kielbasiewicz/blog/2005/04/17/integration-of-sap-business-warehouse-and-enterprise-portal-150-single-sign-on
    http://help.sap.com/saphelp_nw04/helpdata/en/0f/163c405865e801e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/32/98e6418b7eca17e10000000a155106/frameset.htm
    /thread/189547 [original link is broken]
    note: You can as well search in this forum.Im sure there are lots!
    Thanks.

  • Steps involved to Configure a Smartform for printing TO Item

    Hi,
    I want to develop a Smartform to print TO for each Item.
    Currently it is being done using SAP Script.
    I checked the Configuration in OMLV and assigned my print program Z****** .
    This thing here is I don't see any values passed to my program like TO Number, Whse Number etc when called through LT31.
    Where as I assign the standard program RLVSDR40 and debug it all the details are being passed to this program.
    I am not sure if I am missing any configuration.
    Please help me to figure out the issue and let me know all the steps involved in configuring the Smartforms to print Transfer Orders.
    Thanks in Advance.
    MK.

    Hi Murali,
    The SAP delivers the solution to print the TO item by SAPScript, but we can do it by Smartform as well, as in
    You need to create a project for the enhancement MWMD0001, because EXIT_RLVSDR40_001 will fulfill your purpose of doing it the other ways i.e. via Smart from.
    For this you have to use CMOD transaction to create the project for the above said enhancement.
    Note: If you do this way any configuration done via OMNU wont't be considered.
    Then after in teh import parameters you have a table XRLDRI, which contains both the warehouse number and the transfer order number, the same can be passed on to the designed Smartform to fulfill your purpose.
    Sample Code, you can refer to:
    *local variable declaration.
       DATA: l_wa_fm_name            TYPE rs38l_fnam.
    * Local Field Symbols
       FIELD-SYMBOLS : <l_fs_rldri> TYPE rldri.
    * Local Constant declaration
       CONSTANTS : lc_fmname TYPE tdsfname   VALUE 'XYXYXYXY',  "Smartform name, here designated by 'XYXYXYXY'
                   lc_chk      TYPE rldrudruck VALUE 'X'.
    *Moving Transfer Order Print :Item level data into corresponding work area.
       LOOP AT xrldri ASSIGNING <l_fs_rldri>.
    * Determine smartform function module
         CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
           EXPORTING
             formname           = lc_fmname
           IMPORTING
             fm_name            = l_wa_fm_name
           EXCEPTIONS
             no_form            = 1
             no_function_module = 2
             OTHERS             = 3.
        IF sy-subrc = 0.
    * Call the function module of the smartform
           CALL FUNCTION l_wa_fm_name
             EXPORTING
               user_settings    = lc_chk
               tanum            = <l_fs_rldri>-tanum
               lgnum            = <l_fs_rldri>-lgnum
             EXCEPTIONS
               formatting_error = 1
               internal_error   = 2
               send_error       = 3
               user_canceled    = 4
               OTHERS           = 5.
           IF sy-subrc = 0.
           ENDIF.
         ENDIF.
       ENDLOOP."LOOP AT xrldri ASSIGNING <l_fs_rldri>. 
    Please validate the same at your end and let me know in case you require any further inputs from my end.
    BR/Thanks
    Pranav Agrawal

  • Workflow step by step configuration for scheduling level agreement release

    Hi All,
            I tried alot to configure step by step scheduling level agreement release using workflow.
            But, The release code I couln't pass using workflow.
            Plz guide me, or let me know some useful links for the same.

    /Use the user exit  M06E0005 to avoid all this problems.
    In this user exit you can add your custopm logic based on your org structure and then workflow will take to all of release one by one.

  • Please tell me the step by step process of HP Tape drive configuration.

    Dear all,
    we are using ECC5.0 and windows 2003 server and oracle 9i .Please tell me the step by step process of HP Tape drive configuration. I Think initSID.sap file in to change the parameter,but which parameter configure.Please suggest.
    Best Regards,
    Thiru

    Hello Thiru,
    Once the backup completes,tape willl be automatically ejected.
    I dont think there is any way by means of which you can see the data stored in the disk but yes what you can do is to run the backup with verify option
    This BRBACKUP command option verifies the backup after the files have been backed up
    Please refer to following for more info.
    http://help.sap.com/saphelp_nw70/helpdata/EN/55/c491f37407e74781bc0ebd96befba7/content.htm
    Rohit

  • Need to know the steps to setup 'Configurable Search' in PeopleSoft CRM 8.8

    Hi,
    Could you please let me know the steps to setup 'Configurable Search' in PeopleSoft CRM 8.8(PeopleTools 8.48)?
    Thanks

    PeopleBooks > PeopleSoft Enterprise CRM Automation and Configuration Tools PeopleBook > Configuring Search Pages
    Nicolas.

  • How do you Configure Coldfusion MX7 Developer Version Step by Step to an Apache Server?

    Please provide exact steps as to how to Configure Coldfusion
    MX7 Developer Version Step by Step to an Apache Server Step by
    Step. I would be using the latest Apache Server download, which
    would be: apache_2.2.4-win32-x86-no_ssl.msi Please provide this
    answer ASAP.... Please also provide info on what folders to point
    the system to when configuring; in the version I provided it is
    rather hard to figure out what folders to use. Right now the way I
    did it does not work and I cannot see the administration page when
    the Apache Server is Running. Should the Apache Server be Running
    while installing? Also I noticed after the first install of Cold
    Fusion there is another step for full configuration where you have
    to go to the local host page for further configuration. What do you
    have to do there? I couldn't even get to that page because I
    couldn't access the admin page after I did the installation. Any
    help would be very welcome. Thanks in advance.

    This looks promising:
    http://www.sitepoint.com/article/install-coldfusion-mx-windows
    Ken Ford
    Adobe Community Expert
    Fordwebs, LLC
    http://www.fordwebs.com
    "spinaweb" <[email protected]> wrote in
    message
    news:eorrk3$m1g$[email protected]..
    > Please provide exact steps as to how to Configure
    Coldfusion MX7 Developer
    > Version Step by Step to an Apache Server Step by Step. I
    would be using
    > the
    > latest Apache Server download, which would be:
    > apache_2.2.4-win32-x86-no_ssl.msi Please provide this
    answer ASAP....
    > Please
    > also provide info on what folders to point the system to
    when configuring;
    > in
    > the version I provided it is rather hard to figure out
    what folders to
    > use.
    > Right now the way I did it does not work and I cannot
    see the
    > administration
    > page when the Apache Server is Running. Should the
    Apache Server be
    > Running
    > while installing? Also I noticed after the first install
    of Cold Fusion
    > there
    > is another step for full configuration where you have to
    go to the local
    > host
    > page for further configuration. What do you have to do
    there? I couldn't
    > even
    > get to that page because I couldn't access the admin
    page after I did the
    > installation. Any help would be very welcome. Thanks in
    advance.
    >
    >

  • Step-by-step configuration from XI to R/3 for Idoc to File Scenarious

    Hi Gurus,
                    Am the Beginner in Xi, I tried to connect the Xi to R/3 for Idoc to File Scenario but the connection fails, (error in Rfc showing ), could any one send me the step-by-step sm59 configuration. R/3 version 4.6c and Xi version 3.0
    rewards sure
    advance thanks
    with regards
    Thambee

    hi,
          I connected my 800 r/3 client to 100(xi) client, R/3 client is version 4.6d in it rfc test connection is sucessful but remote logon is not responding in my R/3 model view distributed and it's reflected in xi client, when I push the Idoc from R/3(bd10), Idoc created sucessfuly but not despatched
    Idoc message type is 10 and 30.
    Second thing am confused with Ip address bcoz 2 ip address in both system one is loopback and anoter one is tcpip adapter which one i have to give is sm59, help me plz
    with regards,
    Thambe

  • Step by Step workflow configuration required for PM Notification

    Hi All,
    as per our requirement we need to trigger workflow when PM Notification Status will be change (Event will trigger for approval when sombody manually change the workflow status)
    Kindly guide me step by step for configuration of that

    not answered closing thread

  • What are the steps in Apple Configurator iPad restore? It appears to me that Configurator repeats steps, but it probably is that I don't know what happens and when.

    what are the steps in Apple Configurator iPad restore? It appears to me that Configurator repeats steps, but it probably is that I don't know what happens and when.

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can get a clue to what it is, and potentially use it, by going to https://appleid.apple.com/ and clicking 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
    If you don't have, or don't want to use, your rescue email address (you won't be able to add/change it until you can answer 2 of your questions) then you will need to contact iTunes Support or Apple to get them reset (which will be by phone as they need to verify your id - we are fellow users here on these forums).
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
    When they've been reset you can then use the steps half-way down this page to add/change rescue email address for potential future use : http://support.apple.com/kb/HT5312 . Or you could change to 2-step verification : http://support.apple.com/kb/HT5570

  • Simple Step-by-Step Weblogic+EJB Tutorial

    Anyone know of a simple step-by-step weblogic+ejb tutorial? Online?
    Thanks,
    Rocky

    See my signature line.. Book and examples are still free for download. WL6.1
    only at this point, but not for long.
    Check out my WebLogic 6.1 Workbook for O'Reilly EJB Third Edition
    www.oreilly.com/catalog/entjbeans3 or www.titan-books.com
    "Rocky" <[email protected]> wrote in message
    news:3cd95d54$[email protected]..
    >
    Anyone know of a simple step-by-step weblogic+ejb tutorial? Online?
    Thanks,
    Rocky

  • Step by step details to deploy jsp in weblogic

    Hi,
    can any one give me a step by step details to deploy jsp in weblogic 7..
    i am abs new to EJBs and weblogic...
    thnx
    sai.

    sai krishna wrote:
    Hi,
    can any one give me a step by step details to deploy jsp in weblogic 7..
    i am abs new to EJBs and weblogic...
    thnx
    sai.Sai if you are completely new to this on WLS I would recommend reading:
    http://edocs.bea.com/wls/docs70/programming/index.html
    Then Possibly:
    http://edocs.bea.com/wls/docs70/webapp/index.html &&
    http://edocs.bea.com/wls/docs70/jsp/index.html
    You can also find more programming information here:
    http://edocs.bea.com/wls/docs70/programming.html
    HTH
    ~Ryan

Maybe you are looking for