Step by step example needed.

To generate documentation for all classes of project laing in the specified dir.

More detail is needed. -- which version of Javadoc are you using? Where are the package names (do they all start at the same top-level package)? Generic examples are given at:
http://java.sun.com/j2se/1.4/docs/tooldocs/solaris/javadoc.html#examples
-Doug

Similar Messages

Step By Step creation of Smartform in ECC6.0 with example program.

Hi,
Can anyone give me the steps to create smartforms in ECC6.0 with example program call the function module created by form.
Regards,
Chandru

Hi Chandra Prakash,
Go through the following Links, here u can find example with step
by step.
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
http://sap.niraj.tripod.com/id67.html
Check these step-by-step links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
Check these links also.
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
Regards,
Eshwar.

Can someone give me ABAP Dialog program /ALV Step by Step hands on examples

Can someone give me a document for ABAP Dialog programming(module pool) and ALV - but i need Step by Step example ,with sreenshots and explanations.
In general any ABAP, STEP BY STEP hands on examples - Smartform, Sapscrips, Report, BDC will be highly appreciated.
I only need hands on examples please - regular Abap courses does not work because they dont have examples.
Please help ASAP.
Bob
Welcome to SCN - but please read the rules of engagement before posting
Edited by: Rob Burbank on Jun 14, 2009 4:28 PM

What temporary files are you talking about?

MDM Data Manager step-by-step process with an example

Hi All,
I recently started reading MDM. I am clear with MDM-Console concepts. But I have problem with MDM Data Manager. I am confused with data entries in qualified tables, work flows(using microsoft studio), Matching mode- rules(High treshold, low threshold) etc.. I read material posted in forums- but still I am not clear.
I need a step-by-step process for data entries with *examples*. A good example which covers all Data Manager concepts. PDF's with screen shots, videos any thing would help.
Please help me......It would be of great help.
Thanks in Advance.
Suchir

Hi Suchir ,
MDM 5.5 has 4 MDM clients to perform 4 main functionality on the MDM master records.
- Console- This is where all the Administrative work is performed
- Data Manager- This is where the actual maintainence work is done on the master data like consolidation deduplication etc.
- Import manager- Thsi is from where the source matser records are taken into MDM repoistory
- Syndicator- This is from where teh consolidated master data is send back to the target systems.
MDM Data Manager is the heart of MDM
The activities that can be performed in the MDM Data manager are:
- Data Consolidation
- Data Validation
- Data Deduplication
- Data Assignment
- Data Governanace
etc......
Qualified Table:
- Qulaified tables are used to store relational records where one field value is determining the other field or fields value.
- Qualified tables are maintained in Console and can be viewed in Data Manager
- Qualified Table are viewed under a separate section in Data Manager in the right hand side.
- Qualified table has Non qualifiers and Qualifiers.
- Non qualifiers can be seen in the Qualified table and in the linking Qualified field
- Qualifiers can be seen separately under the Qualified section in the data manager
Kindly refer the below link to know more on this:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00a15239-684e-2b10-b8ae-b936b7d1c1fe
Workflows
- Workflows are designed in MDM for Governanace
- You can create the MDM workflow using the MS Visio 2003 stencils in the MDM Data manager in the record mode under the workflow table
- The saved workflow in DM can then be executed either mnaully or automatically based on teh trigger actions
- The trigger action for teh MDM wf are record Add,Update,Import,Manual
Kindly refer the below link to know more on this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60559952-ff62-2910-49a5-b4fb8e94f167 (MDM Workflows Overview)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90990743-91c0-2a10-fd8f-fad371c7ee40 (Demo of MDM Workflows)
Matching Mode
- This mode is exclusively for Master data deduplication
- We need to create Rules,Strategies,Transformation in MDM data manager in teh record mode
- Then you need to run these strategies on the selected records
- Based on your score and threshold set in the strategy MDM will identify duplicate records
- This score will be seen in teh Matching mode
- Colour coding is used along with scores to find out dupliactes
- Green - 100%dupliacte Blue- 50?% Red- No duplicate
Kindly refer the below link to know more on this:
/people/michael.reil/blog/2006/05/18/mdm-matching-strategies-for-master-data-consolidation (matching merging in mdm)
Hope It Helped
Thanks & Regards
Simona Pinto

Screen - exits - step by step simple examples

hi ,
i am new to user exits.
pls help me by giving step by step example for creating a subscreen with 2 fields , and incorporate with some standard sap transactions.
there are many who discussed the same topic in the forum ,but i find confusing.
*so please don't give me the links, take standard transaction and provide me step by step .
Thank you.
regards
Sree

hi,
SAP provides standard transactions to enter data into database. But a client may want to maintain some additional information in SAP other than what is provided.
To make provisions for this, additional screens have to be provided and additional fields must be added into appropriate database table.
To pave way for this, SAP has provided the option for screen exits. Usually, SAP provides the following:
An append structure in the database table with the new fields.
A subscreen area into the standard screen u2013 where the programmer can attach his subscreen of his own program with the new fields.
A function group under which the new subscreen has to be created with the new fields.
Function exits to synchronize the PBO and PAI of the standard SAP program with the PBO and PAI of the subscreen u2013 so that data can flow back and forth between the standard SAP program and the program written by the developer for the subscreen. These function modules also exist in the same function group under which the subscreen will have to be developed.
Finally, a linkage has to be done between the subscreen area of standard SAP screen with the custom subscreen constructed by the developer.
Typically, SAP provides an enhancement in which the developer can create an append structure, use the function exits to synchronize the PBO and PAI of the standard SAP program and the custom subscreen program, and make the necessary linking( as mentioned above in step 4. But, again, this is not a hard and fast rule. Linking in some case, is also done by configurations.) SAP also usually provides the name of the function group under which the subscreen has to be developed.
Necessary guidance about implementing a screen exit development is usually available in the Documentation section of the enhancement ( can be availed by transaction SMOD).
Pre-Requisites
The developer to work on screen exit should have essential knowledge on the following:
DDIC concepts, including the knowledge of append structure.
Concept of SAP Enhancements and implementing them using Projects.
Concept of function exits.
Knowledge on Module Pool u2013 including subscreens, Tabstrip controls etc.
Steps
Guidelines
So, a developer can follow the guidelines mentioned below to implement a screen exit to a standard SAP transaction, as and when required:
Find out the Required Enhancements
Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton u2018SAP Applicationsu2019. A list will appear that contains information on all the enhancements, categorized under functional areas. Developer must search for the enhancements relevant to his functional area of interest u2013 for e.g., Purchasing, Asset Accounting, etc.
Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development.
Utilize the Enhancement in a Project
After you have found one, do as directed in the documentation. Generally, the steps are as follows:
Create a project using CMOD including your enhancement.
Create the append structure with new fields.
Go to the desired function group and create a subscreen with the new fields. Write PBO and PAI for the subscreen, if required.
Use the function exits in the enhancement to link the PBO and PAI of the subscreen with that of the main SAP program supporting the SAP transaction.
Maintain necessary linkage between the subscreen area of standard SAP program with the custom subscreen developed along with the custom program name. This can be done in the project (developed by CMOD including the enhancement) or outside as a part of configuration.
Activate the project.
Test to ensure that required functionality are met.
Case Study 1
Add three new custom fields for Asset master and maintain information for them
Requirement
Three fields in the legacy system have to be maintained in Asset master. These fields are:
Original Asset number u2013 20 characters
Location 2 u2013 15 Characters.
Model no u2013 20 characters
Location 2 should start with u2018Lu2019.
Pre-Analysis
Finding out the Enhancement
As described above, the enhancement is determined. It was found, that enhancement AIST0002 will serve the purpose. It contains the following components (can be viewed by transaction SMOD):
Exit Type Description EXIT_SAPL1022_001 Function Exit Check of User-Defined Fields when Using Create and Change BAPI EXIT_SAPLAIST_002 Function Exit Transfer Data for User Subscreens in PBO. EXIT_SAPLAIST_003 Function Exit Transfer of User-Defined Fields to SAP Master Data Transactions CI_ANLU Customizing Include Include structure to add new fields
Studying the Function Exits
The function module level documentation for the function exits are then viewed from transaction SE37. The documentation clearly laid out for the purpose for their use:
EXIT_SAPLAIST_002
Function module Level Documentation
This function module is called by asset master data maintenance at the start of the dialog. (When changing, it is called after reading of the data from the database; when creating it is called after the transfer of the default values from the asset class and reference asset.) The purpose of the function module is to enable this function group to recognize the master data. For interpreting or controlling master data fields that are important for user fields, it is possible to transfer to global variables at this point, so that they can be recognized when the user subscreens are processed.
Import Parameters
Understanding
This function module is called at the PBO to pass the information retrieved from the database to pass them to the custom subscreen and its underlying program. Import parameter : I_ANLU will be populated with the values for user-defined fields which will be passed to the subscreen program. So, there must be some sort of variable assignment from I_ANLU.
EXIT_SAPLAIST_003
Function module Documentation: This function module is called by SAP asset master data maintenance after the screens are processed, but before saving. The purpose of the function module is to transfer fields entered on user sub-screens of SAP asset data maintenance to the database for updating. The export parameter for this function module is:
Understanding
This function module will be used to transfer the user entered data in the subscreen fields to the main SAP program, which will then be saved into the database.
Studying the Documentation of the Enhancement
The enhancement documentation (as is viewed from the initial screen of SMOD] also supports the idea. Moreover, it informs that we need to develop a subscreen under function group XAIS. This is the function group under which the two function exit modules also exist. So, if the custom subscreen refers to the global data of the function group XAIS, then those values will also be available to these function exits as well.
Going to SE80 and viewing the function group XAIS helps us to inform that there are three DDIC tables declared for it:
Deciding the Final course of Action
After making all the investigations, the final course of action was determined.
SrlNo Step Justification
A project has to be created using transaction CMOD where the enhancement AIST0002 will be included.
Customizing include CI_ANLU has to be created with the custom fields demanded When CI_ANLU will be developed, the custom fields will get appended to the database table ANLU. Also, these fields will be used to create screen fields in the new subscreen.
A custom subscreen, say, 9000 will be developed under function group XAIS. The screen group for the screen will be u2018CUSTu2019 (or any name). The three custom fields added to table ANLU (by creating CI_ANLU) will be used to create new fields in the screen.
In the PAI of the subscreen, validation for Location to start with u2018Lu2019 will be added. The subscreen with three new fields has to be developed so that it can be attached to a subscreen area of the asset master screens.
In the custom include of the function exit module u2018EXIT_SAPLAIST_002u2019, the following code will be written:-
ANLU = I_ANLU. I_ANLU is the import parameter of this FM. The value is assigned to the global variable ANLU, referring which the three new subscreen fields are developed. So, data retrieved from database table ANLU will be passed to this FM as I_ANLU by the standard SAP main program. The value will be taken and passed to the global variable of the function group XAIS, so that the three custom fields (referring to ANLU of XAIS) get populated.
In the custom include of the function exit module u2018EXIT_SAPLAIST_003u2019, the following code will be written:-
E_ANLU = ANLU. The changed values in the subscreen fields exist in global variable ANLU for the function group XAIS. This function exit module will pass the data back to the SAP main program as E_ANLU.
Proper linkage/configuration has to be done so that the new subscreens get linked to the appropriate subscreen area of the Asset master screen. This has to be done u2013 otherwise, the new custom subscreen will not be displayed in the Asset master screens.
Development
Creating a Project to include the enhancement
Go to transaction CMOD and create a project.
Enter a description for the project. Then, click on the pushbutton u2018Enhancement Assignmentsu2019 in the Application Toolbar.
Enter the name of the enhancement and Save.
Go to u2018Componentsu2019.
Creating Custom Include for ANLU
The screen shown below will appear, showing all the enhancement components under the assignment AIST0002. Double-click on the name of the Include Structure to create it.
Create the include structure with three new fields, as required. Then, save and activate it.
Develop the subscreen and the program
Go to transaction SE80. For the function group XAIS, create a new subscreen 9000.
Create it as subscreen.
Then, go to the Layout of the screen and create three new fields from Database table ANLU.
Drag the fields in the screen body and place them.
Then, save and activate the screen and come back to screen flow editor.
Create the PAI module to add validation for field u201CLocation 2u201D, as required .
Activate the whole function group and come out.
Write code in the Function Exits to synchronize the programs
Now, code has to be written in the function modules EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003 so that data flows to and fro between the main SAP program and custom subscreen program. For that, go back to transaction CMOD and change the function exits.
Write code in the function module EXIT_SAPLAIST_002 called once at the beginning of the transaction:
Write code in EXIT_SAPLAIST_003 to pass the data from the subscreen to SAP main program.
Then, activate everything u2013 the whole project and come out.
Complete the configuration to link the subscreen
The development portion is complete. Now, linking of the subscreen has to be done with the subscreen area of the main program. In most of the cases, this linking can be done in the enhancement itself. But, here, requirement is a bit different. It is done by configuration using SPRO.
Assets are created under Asset class. And for each asset class, there is a layout assigned to it. For a layout, there are multiple tab pages assigned to it. And, for each tab page, there are multiple screen groups/field groups assigned.
Here, the requirement is to create these three custom fields in the tab page u2018Generalu2019 of asset master screen ( AS01/AS02/AS03/AS91).
Determine the Layout
To achieve this, first of all, we need to find out which layout is assigned to asset class 1000.For that, go to transaction AOLK( information has to be obtained from functional consultant).Select the Asset Class u20181000u2019 and click on folder u2018General Assignment of Layoutu2019.
Here, for Asset class 1000, for all the user groups, tab layout SAP is assigned. Since layout u2018SAPu2019 cannot be changed, it has to be copied and manipulated to include our screen group. Later, the new layout has to be assigned over here.
Create new tab layout
Go to transaction AOLA. Copy the tab layout u2018SAPu2019 to create another layout, say, YSUB.
System will copy all the settings and will inform you about that.
Select your newly created layout and double-click on the folder u2018Tab page titlesu2019.
You want to put your custom fields in the tab page u201CGeneralu201D. So, select this tab page entry and double-click on the folder "Position of Groups".
Here, all the field groups currently residing in the tab-page u201CGeneralu201D are shown. Add an entry for your newly created fields.
Select the group box from the list. An entry will come with u201CUu201D padded with the custom subscreen prepared by you.
Then, save and come out.
Assign the new Layout to Asset Class
Now, go to tcode AOLK and assign tab layout YSUB for asset class 1000.
Save and come out.
Test the Exit
Everything is over. Now, go to transaction code AS01/02/03 or AS91 to deal with an asset of asset class 1000. You will see your new fields added to the screen. Add values to themu2026save. Then, enter into the tcodes again to see whether the values entered by you are being displayed or not.

Need a coding like report events step by step

need a coding how to write report events.
step by step. by the material iam not getting any thing..
please send me if you have coding or any examples..

Hi Franklin,
Please see the following link. You will find complete guide to report events.
http://help.sap.com/saphelp_erp2005/helpdata/en/9f/db9a9635c111d1829f0000e829fbfe/frameset.htm
Hope this helps,
Pragya

Screen exit example step by step

screen exit example step by step need.

hI
REWARD IF USEFULL
User Exits in FI/CO
by Tami Becker, SAP Platinum Consultant, SAP America, Inc.
Overview
R/3 provides three "customization spots" that allow you to enhance FI/CO features without modifying the standard code. Although often collectively referred to as "user exits," two of the three have different names. SAP Enhancements are used to expand the standard functionality within SAP. Enhancements use function modules and are called from the standard SAP code. Each module in the system has a set of delivered enhancements that help companies expand the standard functionality where they need it. Enhancements were new in release 3.0.
The Open FI Interfaces or Business Transaction Events are also used to expand the standard functionality within SAP. These events are defined in the IMG. Business Transaction Events were new in release 4.0. They are not available for all modules and are not called on all integrated transactions into FI as of release 4.5B. This will change with each release and should be retested.
The older User Exits in FI/CO are "Z" programs that are defined in table T80D for client-dependent user exits, and in table T80I for client-independent user exits. These are also used to expand the standard functionality within the FI/CO modules. These User Exits have been available since the early releases of SAP. All of these FI/CO User Exits are listed in this document in the Configuring User Exits (Older). The list is included because these User Exits are not a part of the Enhancements or Business Transaction Events and do not have an Info System for searching.
Benefits
     Standard SAP functionality can be enhanced without modification to the standard code.
     Upgrades do not erase the functionality and it does not have to be re-transported or re-entered into the system. The enhancements should be thoroughly tested when upgrading to ensure the system will still work as implemented.
Configuring SAP Enhancements
Basic Steps in Configuring an Enhancement
     Find the appropriate Enhancement.
     Enter the ABAP code in the "Z" program within the function module.
     Create a project.
     Add the Enhancement to the project.
     Activate the project.
Example Business Scenario for Enhancements
Company A has a requirement to validate all customer master records created with a U.S. address. The U.S. entity reports on the industry field on the customer master. This is only a U.S. requirement and should not be required for the other countries, so the field status would not work. To accomplish this requirement, Company A will need to set up an Enhancement for the customer master transaction. The necessary steps are detailed below with screenprints. This example was configured in a 4.6C system.
Detailed Steps
1.     Tools   ABAP Workbench   Utilities   Enhancements   Definition   Utilities   List Enhancements
2.     Do not execute this without any parameters! There are too many Enhancements and it will probably time out. Youre searching for a customer master exit. Enter mast in the short text (see Figure 1). Youll start there. Searching for an exit can be tricky, so make sure you try several things before giving up.
3.     Execute the search.
Figure 1. Start Your Search for a Master Exit Here
4.     Look through the list until you find the Enhancement for User exits: Customer Master Data.
5.     Double-click on the enhancement SAPMF02D. This will take you to the details of the Enhancement and list the function modules included in the Enhancement.
6.     To continue, double-click on the function module EXIT_SAPMF02D_001
7.     This will take you to the source code for the function module. Click on the Import tab to review the tables/fields that are available for the Enhancement (see Figure 2).
Figure 2. The Tables That Are Available for the Enhancement
8.     To view the tables/fields that can be changed in the function module, click on the Export and Changing tabs. For this function module, these tabs are empty because you can only validate data. You cannot change any fields in this enhancement.
9.     Return to the Source Code tab.
10.     Scroll down until you see the Include statement in the program. The "Z" program listed after the Include is where your code will be written (see Figure 3).
Figure 3. Your Program Will Begin After the Include Statement
11.      Double-click on the Include. You will be prompted to create the include. Click on Yes to create.
12.      At this point you will be prompted to enter a development class and to create a transport request. If you do not know which development class to use, please contact your technical team.
13.     Enter the following ABAP code into the program (Figure 4):
User exit to ensure that all US customers have a group key
entered on the customer master.
if i_kna1-land1 = 'US' and
i_kna1-brsch = ' '.
message e001(F2).
endif.
Figure 4. The ABAP Code You Need to Enter
14.      Note that the table name matches the table name in the import tab tables.
15.      In this example you are using the standard message class F2 with message number 001. Normally, you will create your own message within your own message class. All customer message classes must begin with a "Z" and are created in transaction SE91.
16.     Save the program.
17.     The next step is to create the project. Go to transaction code CMOD or follow menu path: Tools   ABAP Workbench   Utilities   Enhancements   Project Management.
18.     Enter the project name; begin the name with a "Z."
19.     Click on the Create button.
Figure 5. Click on Create After You Type in the Project Name
20.      Enter in a description for the project.
21.      Click on the Enhancement Assignments button.
22.      You will be prompted to save the enhancement. Click on Yes.
23.      At this point you will be asked for a development class and to create a transport for the project. You may use the same one created when adding the ABAP code to the function module.
24.     Enter the name of the enhancement SAPMF02D (see Figure 6).
Figure 6. Enter the Name of the Enhancement Here
25.     Save the project.
26.     Back out of the enhancement assignment.
27.     Activate the project by hitting the Activate button.
The SAP Enhancement is ready to be tested! Try creating a customer with U.S. as the country and a blank group key. Be sure to test one with a group key to make sure the message is not displayed in error as well.
Configuring Business Transaction Events
Basic Steps in Configuring an Event
     Make sure the application is active for Business Transaction Events.
     Copy the sample interface function module into a "Z" function module.
     Enter the ABAP code into the source code section of the new "Z" function module. You may choose to create a "Z" program to enter the code into and then insert the "Z" program into your function module source code.
     Activate the function module.
     Assign the function module to the event, country and application.
Example Business Scenario for Business Transaction Events
Company A would like to copy the group key field from the vendor master into the allocation field on all the line items within a vendor invoice and payments, including the vendor lines. This requirement assumes only one vendor is posted to in a document.
To accomplish this requirement, Company A will use the Business Transaction Event 1130, Post Document: SAP Internal Field Substitution.
1.     IMG Menu Path: Financial Accounting   Financial Accounting Global Settings   Use Business Transaction Events   Environment   Infosystem (Processes).
2.     Find the correct Business Event. You are updating a field, so you select the Processes Info System instead of the Publish and Subscribe Info System.
3.     Execute the search with the defaults.
4.     Find the correct interface for updating a document: Post Document: SAP- Internal Field Substitution (see Figure 7).
Figure 7. Find the Correct Interface for the Business Event
5.     Put your cursor on the event and click on the Sample Function Module button.
6.     You are now in transaction SE37 Function Builder. This is the function module (sample_process_00001130) you will need to copy into a "Z" name function module for your coding (see Figure 8).
Figure 8. This Is the Function Module You Need to Copy Your "Z" Name Function Module
7.     Click on the Copy button.
8.     Enter the "Z" function module name in the To Function Module field (see Figure 9).
9.     Enter a Function Group. If you need to create a "Z" function group, go to transaction code SE37 and follow menu path: Go to   Function Groups   Create Group. A function group is a logical grouping of function modules, and the ABAP code is generated for function groups. You will be prompted for a development class and transport when creating the function group.
Figure 9. Enter Your "Z" Function Module Name Here
10.     In Function Builder (transaction SE37), enter the new "Z" function module. Click on the Change button.
11.     The system will default into the source code screen where you may enter your ABAP code.
12.     Notice the tables available for the code. Additional tables may be declared if necessary.
13.     Enter the following source code (see Figure 10):
tables: lfa1.
data: z_groupkey like lfa1-konzs.
z_groupkey = ' '.
loop at t_bseg.
check for vendor lines. If one is found, read the vendor master and
retrieve the group key field.
if t_bseg-koart eq 'K'.
select single konzs from lfa1 into z_groupkey
    where lifnr = t_bseg-lifnr.
endif.
Move the group key field into all line items allocation field.
loop at t_bsegsub.
t_bsegsub-zuonr = z_groupkey.
modify t_bsegsub index sy-tabix.
endloop. "t_bsegsub
endloop. "t_bseg
Figure 10. The Screen Where You Enter Your Source Code
14.     Save the function module.
15.     Back out to the main Function Builder screen by clicking on the green arrow button.
16.     Activate the function module by clicking on the Activate button (see Figure 11).
Figure 11. Activate the Function Module from This Screen
17.     Assign the function module to the event in the IMG: Financial Accounting   Financial Accounting Global Settings   Business Transaction Events   Settings   Process Function Modules   of an SAP Appl.
18.     Hit enter past the warning messages that this is SAP data.
19.     Click on the New Entries button.
20.     Enter the process for your interface. In your example it is 00001130.
21.     Enter the country the interface is valid for. If it is valid for all countries, leave this field blank.
22.     Enter the application the interface should be called for. If it should be called for all applications, leave this field blank. Please note that not all integrated transactions are programmed to go through these interfaces! You will need to test to find out!
23.     Enter the new "Z" function module (see Figure 12).
Figure 12. Enter Your New "Z" Function Module Here
24.     Save the settings. At this point you will be prompted for a CTS number for the configuration change.
25.     The Business Transaction Event is complete! You are ready for testing.
Configuring User Exits (Older)
Basic Steps in Configuring an User Exit
     Create a "Z" program for the User Exits and enter the necessary ABAP code.
     Enter the new program name into table T80D.
     Configure the application to call the User Exit.
List of User Exits
     Variable Field Movements
     Substitutions in FI, CO, PCA
     Validations in FI, CO, PCA
     Rollups in SPL
     Fixed Field Movements in SPL
     Cost Center Summarization on Detail Screen
     Sets Formula Variables
Example Business Scenario for User Exits
Company A would like to add a "Z" field in the Special Purpose Ledger to capture a Business Unit field for reporting. They have used all the standard SAP fields such as Business Area and Profit Center. The field will only be used for reporting and is only needed in the Special Purpose Ledger. You created a special ledger table (ZZSPL1) with field Z_BUNIT and need to populate this field based on a combination of G/L account, fund and functional area.
To accomplish this requirement, Company A will use the Variable Field Movement User Exit. To make maintenance easier, table ZZBUSUNIT was created with the G/L account, fund and functional area fields as key fields, and the business unit field as a non-key field. You generated the table maintenance so the table could be updated using transaction SM30. SAP users update the business unit determination rules in table ZZBUSUNIT by entering the G/L account, fund and functional area, and then the business unit that combination should be posting to. The User Exit will read table ZZBUSUNIT using the G/L account, fund and functional area from the posting transaction and determine the business unit. The steps for using the user exit are detailed below. This example was created on a 4.6C system.
1.     Copy the delivered template User Exit program RGIVU000_TEMPLATE into a "Z" program. Follow menu path Tools   ABAP Workbench   Development   ABAP Editor (transaction code SE38). In early releases, the delivered program was RGIVU000.
2.     You will be prompted for a development class and a transport. Please check with the technical team for the correct development class.
3.     At the initial ABAP Editor screen, enter your new "Z" program name, select the Source Code button and click on Change (see Figure 13).
Figure 13. To Enter Your New Code, Select Source Code and Click on the Change Button
4.     Enter the following code in the User Exit (Figure 14):
FORM E01_MVC USING FROM_FIELD TO_FIELD.
to_field = 'CORP'. "Set a default business unit.
read table zzbusunit to determine the business unit field.
select single z_bunit from zzbusunit into to_field
   where hkont = accit_glx-hkont and
    geber = accit_glx-geber and
    fkber = accit_glx-fkber.
ENDFORM.
Figure 14. Enter Your New Code at This Screen.
5.     Activate the program by clicking on the Activate button.
6.     Change the configuration in the User Exit table to point to your new "Z" program.
7.     Follow the IMG menu path: Financial Accounting   Special Purpose Ledger   Basic Settings   User Exits   Maintain Client Specific User Exits.
8.     The entry to maintain is application area GIMV: Variable Field Movement. Enter your "Z" program (see Figure 15).
Figure 15. Enter Your "Z" Program in the Application Area GIMV: Variable Field Movement
9.     Save the changes.
10.     The final configuration step is to assign the User Exit in the variable field movement for your special ledger table. In the IMG: Financial Accounting  Special Purpose Ledger  Basic Settings  Master Data  Maintain Field Movements. Field movements control how the fields in a special ledger table are populated. They can be populated straight from other fields in a posting or through User Exits.
Figure 16. After You Assign the Business Unit Field and the G/L Account, the Exit Field Should Contain U01.
11.     Assign the business unit field as a receiver and the G/L account as the sender. The Exit field should contain U01 (see Figure 16).
12.     The User Exit number U01 calls User Exit E01_MVC form in the "Z" program.
13.     Save the field movement.
14.     You are ready to test your User Exit!

Menu Exit & Screen Exit Implementation Step by Step Implementation Needed:

Hi Experts,
I am in need of how to implement Menu Exit and Screen Exit using a simple
example.If any step by step implementation through snapshots were it will be
helpful instead just some links that doesn't work after some steps due to version
changes or not proper steply explanations.Points will be rewarded accordingly.
Thanks for your help in Advance.

Hi Sudha,
Screen exits are exits that allow you to use a reserved part of the screen (A subscreen) to display or input data.
It is determined be SAP where the sub screen will be displayed.
The syntax is: CALL CUSTOMER-SUBSCREEN
The screen exit is not processed untill the corresponding subscreen has been created in an enhancement project, and the project has been activated.
Note:
Function codes are only processed in the main screens flow logic
You are not allowed to enter a name for the subscreens command field
You are not allowed to define GUI stauses
You are not allowed to enter a value for Next screen
The global data of the program is not available for the subscreen. Data for the subscreen is provided by function modules. These function modules belongs to the same function group as the subscreen
Subscreens are edited with transaction CMOD. When you activate a project containg subscreens, the calling screen is regenerated and the subscreen is displayed next time you display the calling screen
The developer must create the subscreen and the corresponding PBO and PAI modules
How to identify screen exits
Look after CALL CUSTOMER-SUBSCREEN in the screenprogram of the screen you want to modify.
Use transaction CMOD menu Utillities -> SAP enhancements to search for screen exits
MENU EXITS
Menu exits allow you to add your own functionallity to menus. Menu exits are implemented by SAP, and are reserved menu entries in the GUI interface. The developer can add his/her own text and logic for the menu.
Function codes for menu exits all start with "+"
Example
We want to create a new menu item in the Office menu. The text for the menu should be "Run ZTEST", and the menu will
run report ZTEST.
Goto transaction SE43 Area Menu Maintenance
In Area Menu Paramenter type 'S000' (S triple Zero)
Select Change and ignore all the warning screens
Expand the office menu. In the buttom of the office tree you will find a menu named "Customer function"
Double click on the text. In the pop-up screen change the text to "Run ZTEST". Note that the trsnaction code is +C01
Goto transaction SE93 and create transaction +C01 that calls report ZTEST.
Now you will se the menu displayed in the office tree. If you delete transaction +C01 again, the new menu will dissapear.
USER EXITS
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a functionmodule. The code for the function module is writeen by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is: EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as: CALL CUSTOMER.-FUNCTION <3 digit suffix>
Example:
The program for transaction VA01 Create salesorder is SAPMV45A
If you search for CALL CUSTOMER-FUNCTION i program SAPMV45A you will find ( Among other user exits):
CALL CUSTOMER-FUNCTION '003'
exporting
xvbak = vbak
xvbuk = vbuk
xkomk = tkomk
importing
lvf_subrc = lvf_subrc
tables
xvbfa = xvbfa
xvbap = xvbap
xvbup = xvbup.
The exit calls function module EXIT_SAPMV45A_003
2. How to find user exits
Display the program where you are searching for and exit and search for CALL CUSTOMER-EXIT
If you know the Exit name, go to transaction CMOD. Choose menu Utillities->SAP Enhancements. Enter the exit name and press enter.
You will now come to a screen that shows the function module exits for the exit.
3. Using Project management of SAP Enhancements
We want to create a project to enahance trasnaction VA01
Go to transaction CMOD
Create a project called ZVA01
Choose the Enhancement assign radio button and press the Change button
In the first column enter V45A0002 Predefine sold-to party in sales document . Note that an enhancement can only be used i 1 project. If the enhancement is allready in use, and error message will be displayed
Press Save
Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002. Double click on the exit.
Now the function module is displayed. Double click on include ZXVVAU04 in the function module
Insert the following code into the include: E_KUNNR = '2155'.
Activate the include program. Go back to CMOD and activate the project.
Goto transaction VA01 and craete a salesorder. Note that Sold-to-party now automatically is "2155"
Please check if the thread given below would be of any help.
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/menu-exits-72696#
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
Regards
KK

HELP! Need final JMICRON 'step by step' for us newbies on our p965s!

After searching and reading for HOURS on this, I discovered two things. First, there are about a DOZEN different solutions many of which contradict eachother. The other annoying issue is the lack of full explaination in ANY of the threads! Here's what I'm requesting. A full step by step of how to get this board working with one SATA hard drive and one PATA DVD burner on a new computer being built. And lets not assume that just because someone is "building" a computer that they know ALL the ins and outs of flashing bios, F6 install, and other phrases that make most of us gloss over and go "huh?". Its bad enough MSI has released a board that wont work out of the box unless you happen to be one of the 2% of the population that has an SATA optical drive. REALLY BAD! No buzz words, techie jargon... no assumptions. Spell it out as if a reasonably smart person could follow who hasnt done this before.
Here's a BAD example:
1) Disable IDE as a master
2) SATA1 enhanced mode and set to IDE
3) Flash latest bios
4) Load Jmicron drivers
5) Post
6) YEAH!
Ok, these threads are all over this forum and confuse most of us.
Here's what I'm requesting (obviously this is just an example) that really hasnt been done yet in the forum. And this is for me AND everyone else. Cuz I'm stuck too...grrrrrrrrr
1) In BIOS, Integrated Peripherals, Onchip ATA: the PCI IDE bus Master should be DISABLED.
2) .......
3) .......
4) Flash the latest bios
a) Download latest bios here <link>
b) copy onto floppy
c) make floopy first boot device
d). ......
e) .......
5) Install JMICRON driver
a) Download latest JMICRON driver here <link>
b) copy onto floppy
c) Install as 'Standard IDE' when asked
d) .....
6) Install operating system
Now this is JUST an example, the verbiage I pulled from the MULTITUDE of posts I've been reading and are now COMPLETELY confused. I dont know how to flash bios, or when people say F6 during the install, or ANY of this stuff. But I can follow directions like most people here. PLEASE HELP!

You don't say which router you use but I guess it is not a VLAN Router. The SRW is a L2 switch. It separates VLANs on ethernet level. If you want to make some sense out of that you'll need a VLAN router or L3 switch to which you trunk all those VLANs and which routers the traffic to the internet and between the VLANs. The SRW cannot do that. It separates the VLANs but it cannot join them or route traffic between them. Routing is a task of a router or L3 switch.

I have one apple ID for multiple devices in my family. I'd like to keep it that way for itunes/app purchases. I would like a simple step 1, step 2, step 3 response on what I need to do to separate all other features like imessage, contacts, emails, etc.

I have one apple ID for multiple devices in my family. I'd like to keep it that way for itunes/app purchases. I would like a simple step 1, step 2, step 3 response on what I need to do to separate all other features like imessage, contacts, emails, etc.
I have been reasearching how to do this on the internet, but I haven't found an easy explanation yet. My family is going crazy over each others imessages being sent to others in the family and not being able to use FaceTime because of conflicting email addresses. I have read that if each person gets their own iCloud account, this would work. However, I need to know what to do after I set everyone up with their own iCloud account. Do I make that the default email address to be contacted or can they still use their hotmail email addresses. Any help- with easy explanation- would be much appreciated!!

We do this in my family now. We have one account for purchases, so it is used to share music and apps (I think that is in Settings/iTunes & App Stores). Each iDevice has this configured.
Then, each of us has our own iCloud account that is configured under Settings/iCloud. That then allows us to have our own Mail/Contacts/Calendars/Reminders/Safari Bookmarks/Notes/Passbook/Photo Stream/Documents & Data/Find My iPhone/and Backup. That Backup piece is pretty sweet and comes in handly if you replace your iDevice. You can just restore from it.
So we all share the Apple Store account but we all have our own iCloud accounts to keep the rest seperate or things like you mentioned are a nightmare.
In answer to what iCloud does for you: http://www.apple.com/icloud/features/
Think of it as an internet based ("cloud") area for all of those items listed in my response. What you need to remember is photo stream only maintans the last 1000 pictures so don't count it as a complete backup solution for your pictures. Even though I rarely sync with a computer these days, I do still try to sync my phone with iPhoto (I have an iMac) so that I have copies of all of my pictures. 1000 may not stretch as far as it sounds.
Message was edited by: Michael Pardee

I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have. Can I uninstall it and go back to an older version that would have screen recording? If so, how? Step by step needed. Thank you for your time.

I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have. Can I uninstall it and go back to an older version that would have screen recording? If so, how? Step by step needed. Thank you for your time.

Did you remove Quicktime X?
On a normal install Quicktime 7 is installed in the Utilities folder and Quicktime Pro in the main Applications folder.
You will need to reinstall OS X to get Quicktime X back if you have deleted it.
I notice yor profile says 10.5.8. Quicktime X is only available on 10.6 and above.

Step By Step Example for Application Integrator for Yahoo or any kind of

All EP Expert,
I want to create yahoo or Gmail or any kind of url iView on which I can implement SSO for learning purpose on my Local laptop.
I have installed EP SP9 on my laptop.
I go through some blog and some discussion but I am not able to find below files mentioned in those blog.
1. AppIntegrator.zip file to find two files
2. com.sap.portal.howtos.webapp.par file
3. HowToUseAppIntegrator_en.pdf file
So I am not able to perform step by step instruction as mentioned in blogs.
Can any one provide me any kind of documents for EP SP9 for Application Intigrator functionality basically I am interested to integrate JAva base application in my portal with SSO but if any one can provide for Yahoo or Gmail for EP SP9 it will be a great help.
Thanks and waiting for some help on this form all EP experts.
I will reward full points for right answer.
Thanks in Advance.
Ashish.

Hi Mona,
Thank you very much for your prompt reply. I really appreciate if you can provide me exact location from where I can download "Application Integrator" zip file from which I can extract "com.sap.portal.howtos.webapp.par" file as describe in example PDF file. I tried very hard to find on SDN and "help.sap.com" but could not find it.
If you have it with you then please send it to me on my email ID [email protected]
Or please tell me exact location from where I can download it.
I give 10 points for this help.
Thanks in Advance.
Ashish.

Help needed in step-by-step form - Please

For the past month I have been editing in 16:9. My new project needs to be in 4:3. Can someone give me a step-by-step way to get FCE4 to revert by to 4:3. I have gone to easy set-up and changed to DV and still any sequence sets up in 16:9.

OK. This is the reverse of the problem someone else was having.
Go to easy setup and change the setting to DV PAL or NTSC. I don't know which you're working in; you didn't say where you are. I'm assuming you're working in standard definition and not in HD.
Once you've changed the easy setup make a new sequence. Copy the contents of the 16:9 sequence and paste them into the new 4:3 sequence. They will look distorted. Select all the images and use Edit>Remove Attributes. Make sure you remove the distort value. If you did some animations that involve this they will most likely have to be redone.

Step by Step document on Guided Procedures for Benefits.......Help Needed..

Hello Gurus,
We are in process of implementing Benefits and for which we are using Guided Procedures, want to have understanding of the process can you please provide the step by step documentation and an example process that will be of great help.
Appreciate your help.
Thanks in advance for your time.
Kind Regards,
Pramod

Hi Pramod,
Please have a look at the below links. You will probably get some help.
First of all, see the following thread, see the answer by shen peng in the end, explained CAF in very simple terms:
https://www.sdn.sap.com/irj/sdn/thread?threadID=470956&tstart=0
Now have a look at the following links for understanding about CAF, :
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4277f37b-0601-0010-0597-89e792177e2b">Creating Composite Applications with SAP CAF</a>
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84df3e36-0301-0010-be9d-b99aad8c81e6">Composite Application Framework in SAP NetWeaver</a>
<a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1122">CAF training material online</a>
<a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1231">Additional CAF Training material online</a>
See the following links for understanding CAF GP in detail:
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0b1c2eda-0c01-0010-b597-b107502cdc71">CAF Guided Procedures Overview</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/39/198141f906040de10000000a1550b0/frameset.htm">CAF Guided Procedures</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/c7/984942da51690de10000000a155106/frameset.htm">Concepts of the Guided Procedures Framework</a>
Lastly, see the following links for CAF GP Wiki Home Page and CAF Tutorial Center:
<a href="https://wiki.sdn.sap.com/wiki/display/BPX/Guided+Procedures">CAF Guided Procedures Wiki Home Page</a>
<a href="https://www.sdn.sap.com/irj/sdn/nw-composition?rid=/webcontent/uuid/d8dbd703-0801-0010-c9bf-c04bc52f562f">Composite Application Framework Tutorial Center</a>
You can also have a look at the following thread, you can drill down into many more links:
https://www.sdn.sap.com/irj/sdn/thread?threadID=405517&tstart=0
https://www.sdn.sap.com/irj/sdn/thread?threadID=314804&tstart=50
Bye
Ankur

I have a canon hf10 and need to be able to transfer my video from my camera to my computer so I can burn them to dvd is there a step by step process? i'm new 2 the mac world. I tried downloading imovie 7.1.2 but it said, "An eligible iMovie application

i have a canon hf10 and need to be able to transfer my video from my camera to my computer so I can burn them to dvd is there a step by step process? i'm new 2 the mac world. I tried downloading imovie 7.1.2 but it said, "An eligible iMovie application was not found in the location /Applications." can anyone give me step by step instructions? i would hate to call the geek squad!!!LOL

and what's a firewire port? how do i know if i have one?

I have an iPhone application already developed and it works great ,now i need to make that same application for my iPad .can someone please tell me step by step instructions on how to make it .

i have an iPhone application already developed and it works great ,now i need to make that same application for my iPad .can someone please tell me step by step instructions on how to make it .

Try the developer's forum:
https://discussions.apple.com/community/developer_forums

Step by step example needed.

Similar Messages

Maybe you are looking for