Step by Step Guide Details for RFC to File and File to RFC scenario

Hi Guru's
Good day to you. I am tyring to develop some scenarios based on RFC adaptor. so i want to start up with basic scenarios like RFC to File scenario(Here i just want to pull some data from SAP using RFC and put it in destination folder as an text file) and FILE to RFC scenario (Here i just want to take some data from the file and update into SAP).
For doing these scenarios i would like to request you people to send me the step by step guide which explains me about the complete steps of configurations required to do the RFC to FILE scenario and FILE to RFC scenario.
I found some scenarios and i am in confused state. so i request you to please put your experience to help me out.
thanks in advance.
Regards
Raj

Hi Aaron,
I don't know your scenario and your ECC and PI versions but I learned how to use ABAP Proxy more than 1 year ago with the following tutorial:
Edit--> The forum doesn't allow me to post external link, just search "ABAP Proxy Communication Scenario" in google and visit the 1st result
The way to develop ABAP Proxys has changed a little if your PI is 7.1. In the ECC side, the transaction SPROXY looks much better too if you have a recent version of the ECC.
Edited by: Marshal on Oct 8, 2009 5:08 PM
I've found that SDN Document. Maybe the scenario is not the most simple to start with ABAP Proxy but is very well documented and is for PI 7.1. The document also handles the inbound and outbound proxys
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c00ca32e-f991-2b10-f5be-97114bd2b08f&overridelayout=true]
Edited by: Marshal on Oct 8, 2009 5:22 PM

Similar Messages

Hi Any body guide me for Advance pricing setups and implementation manual with screen shots

Hi Any body guide me for Advance pricing setups and implementation manual with screen shots
Regards
Guru

Hi,
Please <b>read the rules of engagement</b> before posting.
<b>- Do not ask to send you an email.</b>
The question you ask and the solution to it is often also interesting for other users of the community. If you ask somebody to send you the answer per email, you deprive others of also learning to know the answer. Therefore any requests for sending material or answers to an email address will be modified by the forum moderators.

Help on RFC to JDBC and JDBC to RFC

Help on RFC to JDBC and JDBC to RFC
Hi Gurus
I have the scenario where an RFC will be triggered in SAP , to write to a DB2 database and insert new records in a table
and vice versa the JDBC has to read som data from a table based on a primary key, mark them as read for not be read next time and send the data to an RFC where a table in SAP will be updated.
I have never worked with JDBC before , pls advice.
is there any new issue to consider in PI 7.0 regarding JDBC
Thanks.

The requirement looks standard,
SEARCH IN SDN FOR JDBC scenarios,you will find many docs for sender as well as Receiver.
>
> is there any new issue to consider in PI 7.0 regarding JDBC
>
no issue with PI7.0.
Regards,
Raj

Step by Step document on Guided Procedures for Benefits.......Help Needed..

Hello Gurus,
We are in process of implementing Benefits and for which we are using Guided Procedures, want to have understanding of the process can you please provide the step by step documentation and an example process that will be of great help.
Appreciate your help.
Thanks in advance for your time.
Kind Regards,
Pramod

Hi Pramod,
Please have a look at the below links. You will probably get some help.
First of all, see the following thread, see the answer by shen peng in the end, explained CAF in very simple terms:
https://www.sdn.sap.com/irj/sdn/thread?threadID=470956&tstart=0
Now have a look at the following links for understanding about CAF, :
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4277f37b-0601-0010-0597-89e792177e2b">Creating Composite Applications with SAP CAF</a>
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84df3e36-0301-0010-be9d-b99aad8c81e6">Composite Application Framework in SAP NetWeaver</a>
<a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1122">CAF training material online</a>
<a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1231">Additional CAF Training material online</a>
See the following links for understanding CAF GP in detail:
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0b1c2eda-0c01-0010-b597-b107502cdc71">CAF Guided Procedures Overview</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/39/198141f906040de10000000a1550b0/frameset.htm">CAF Guided Procedures</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/c7/984942da51690de10000000a155106/frameset.htm">Concepts of the Guided Procedures Framework</a>
Lastly, see the following links for CAF GP Wiki Home Page and CAF Tutorial Center:
<a href="https://wiki.sdn.sap.com/wiki/display/BPX/Guided+Procedures">CAF Guided Procedures Wiki Home Page</a>
<a href="https://www.sdn.sap.com/irj/sdn/nw-composition?rid=/webcontent/uuid/d8dbd703-0801-0010-c9bf-c04bc52f562f">Composite Application Framework Tutorial Center</a>
You can also have a look at the following thread, you can drill down into many more links:
https://www.sdn.sap.com/irj/sdn/thread?threadID=405517&tstart=0
https://www.sdn.sap.com/irj/sdn/thread?threadID=314804&tstart=50
Bye
Ankur

Setup Guide (detailed) for Windows 2003 64bit

I am thinking of writing a comprehensive guide to installing and running Windows Server2003 for AMD64bit. I have been running this setup for three days now and have done exhaustive testing. I have it running like a workstation and have full directx9 hadware acceleration on the ATI9800Pro, promise SATA Raid 0 is sweet and now have the Audio and network drivers installed and working without issue.
It is a rather complex procedure but it is well worth it to experience 64bit windows.
As a tatster Sandra File Benchmarks on my Raid 0 are 127500 a new record, PCMark2002 drive score 4333 another record, PIfast bench (Hexus Uk) 53 seconds another record, 3DMark2003 6350 with the microsoft drivers no overclocking of card.
If there is sufficient interest I will do this.
The beta version is downloadable from Microsoft for free.
I would require hosting for screenies and driver download links...so any help appreciated.
Please register your interest and I will get to it if there is enough to justify the time.

WINDOWS SERVER 2003 SET UP GUIDEBefore you begin I STRONGLY suggest backing up all data, and installing to a separate partition or drive, you will be sorry later if you havent believe me.
This is my Set Up for clarification.
Athlon64 3200 at 225 fsb Prime stable.
1 gig of Kingston HyperX 3500 BH5 chips
Timings are 2 3 2 8
2 x Maxtor SATA 160gig 8mb Cache in Raid 0 on the Promise(less prone to errors)
HIS Excalibur 9800pro
Sony DRU500A
Sony CRX 220E1
NEC DVD ROM
Onboard Sound
Belkin wireless adsl modem/router
Enermax 651P PSU
Voltages as follows
Vcore 1.525
Dimm 2.80
AGP 1.60
Turbo selected in bios
Cool & Quiet enabled
DOT Off
FSB 225
Bios 1.20 complete with bugs.....!!!
I have found a superb guide that shows you how to change Windows Server2003 into a Workstation. So as I do not approve of plagiarism I will link you all to it, it is an excellent guide and I wish id seen it before my adventure. This guide was written for the 32bit edition, most of it is correct but you ignore the refernce to installing Direct X as it is already included, also ignore the section covering Themes.
LINK http://www.msfn.org/win2k3/
Here is a Link to the Windows 2003 Server 64bit download
LINK http://www.microsoft.com/windowsserver2003/64bit/extended/trial/default.mspx
Some specific things you will need on the K8T Neo
If you install with cool & quiet support enabled in bios it must remain enabled otherwise you will fail to boot to the desktop.
There is no need to install the AMD cool & quiet driver.
There are drivers for the Network card and the Audio Codec, if someone will host them for me i will mail them to them, the Audio driver is already listed here in the forum. I would appreciate a mod linking to it in here.
Do not try and install any drivers that only support 32bit windows xp, they will interfere with your 64 bit driver installation.
The best way to install your drivers is by using the Have Disk method.
For best results use an Ethernet based modem or a router, as there is limited support for USB based DSL modems. Also there is no Integrated Firewall in thsi edition, so if you do not have one try using Zone Alarm.
The promise raid drivers are available directly from Promise here is a link
Promise 64bit Raid drivers
LINK http://www.promise.com/support/download/download2_eng.asp?productId=107&category=driver&os=0
You can use these with just one drive installed, just set up a single drive raid in the Promise Bios. You must use the F6 floppy install during set up.
My preferred order of things, is to follow the guide first, then install your new drivers.
One thing to note is the increased memory efficiency, the os will use up as much as it can. Also multitasking is smoother. All in all for a Beta it is very stable.
Anything else I can think of I will add later..
Here is a PCMark2002 Screenshot http://www.satanslaw.co.uk/amd64/PCMark2002%20Win64.JPG
Link to the Lan Driver here http://www.satanslaw.co.uk/amd64/RTL69A64(105).zip
Link to the Audio Driver Here http://www.satanslaw.co.uk/amd64/Rtlaudio[1].A64.zip
Thanks to Paul for the hosting
HAVE FUN

What are steps to design robotic arm for inverse kinematics calculation and 3D simulation???

I want design a 5 axis robotic arm for my college project and I wand to simulate the model before building the hardware so plz help me to design the arm in labview

If you are familiar with the Denavit-Hartenberg convention the LabVIEW Robotics Module has functions to visualize and find numerical inverse kinematics for serial robotic arms. Be aware though that there is a visualization bug that affects prismatic joints, causing them to be treated as revolute joints. The inverse\forward kinematic solutions should be correct though.

Configuration Details for GL account, Fund and Funds center

Hi All
I am executing budget report by using FMRP_RFFMEP1FX. In this report shows the fundcenter wise invoice details. As I execute the report with different fund center I am getting different output that is not match with actual one for that I want to know which transaction code maintains the fund, Fundcenter configuration details.
1. Which transaction code maintained GL, FUND and Fund center configuration?
2. In SPRO where to find the fund and fundcenter configuration details.
Please let me know
Thanks & Regards
KRISHGUNA

In SPRO go to Public Sector Management to find the configuration details for Funds Management.
Thanks and regards
Kedar

Support details for 10.1.2 and 10.1.3

Hi All,
Do you know the support details for 10.1.2 BPEL Manager and 10.1.3 SOA Suite, when a Customer has these, how long will these be supported by Oracle?
Can you provide any link which can provide these details?
Appreciate your help.

Hi,
take a look here
http://dietrichschroff.blogspot.com/search/label/Support?max-results=100
there should be links you should follow.

Wait for a file and start execute a scenario process

What is the best way to achive: Wait for a file and then once the file in droped...execute a scenario process.
Sample scenario:
- Admin user ftp the file to a target directory on Unix (export/home/odi/input/files)
- A scheduled scenario package will be running/scheduled daily
- In the above scenario, The first step is to have one OdiFileWait (with options: Dir:/export/home/odi/input/files, File: xxxxx.txt,wait time and loop over..etc)
/* But for some reason OdiFileWait is not waiting/checking for the file presence define in the option. It seems to run immediately without checking the presence of the file and passing it to run the second step) */
- The second step is the "OdiStartScen" (This will run an interface generated scenario) and since the file doesn't exist as a source to load that this interface uses...its fails.
What's the common practice to accomplish this? Appreciate your feedbacks…
Thank you

Update:
I increased the timeout and Pollint setting in OdiFileWait option and its working fine now.
When the file exists (or) ftp within the timeout the process goes to next step (OK). But, say the file doesn't exists and the timeout finished...how do i set a KO to OdiFileWait and stop/complete by existing at that step itself with out failure.

Use external drive for Time Capsule backups AND file storage?

I have an external drive formatted by my MBP. I'm using it to store my iTunes music library and iPhoto pics. Can I use the drive for Time Capsule backups as well?

Yes, but that is not recommended. Storage and backup should be kept separate to reduce the chances of a disk failure. This is especially important because you cannot even partition a Time Capsule drive. Go get a separate drive for your storage needs. Get another drive for a second backup and use a different method of backup than Time Machine

No web sign in access for Verizon online backup and file sharing - HELP!

I need to sign-in via web browser to my backup files in my Verizon Online Backup and File Sharing service. The Verizon site redesign redirects the old URL with a sign in to a sales page with no way to reach my stored files.
I contacted Verizon support more than a week ago about this asking for a URL with a sign in option to the cloud, was told that it was a problem affecting many customers (obviously eveyone with the online backup and filesharing service!) created by the redesign and that they would have a page created to allow login within 24 hours. I've heard nothing back and still have no access.
I made very clear that this was a HUGE problem for me, as I'm out of the country and rely on file access, and was on deadline for a critical professional project. The support tech I was on live chat with assured me they were working on it and that he would contact me via email as soon as it was resolved. Lots of apologies, etc. but now, a week later ... still no access and no contact. Astonishingly unprofessional.
When I tried again to find a link and/or contact support on Friday I was given no option to file a support ticket, chat with support or do any other kind of follow up. I've tried every search string option possible, including the name of the service with "sign in" appended (the Verizon nomenclature)--site searches a week ago for the service name returned null results. Web searches produce summaries from the old "My Services" page that include "sign in" but those links now redirect to the sales page that tells me how great it is I'll be able to access my files with a web browser with Online Backup and File Sharing. But no option to access the service.
Has anyone figured out a workaround or have a saved URL that still resolves to a Sign In portal?
I grow more desperate by the day. Thanks for any assistance.

I just wasted a lot of time on this same issue -- it turns out I couldn't find my way into the web application because I normally log into a subaccount, and you have to be logged into the primary. I had tried logging into the primary but apparently hadn't tried all possibilities from there.
So I chatted with Verizon support and got the phone number for Online Backup support, left them a message (because their hold music is so repellent I couldn't stand to remain on the line, maybe that's deliberate) and got called back about four hours later (and a second callback the next day, since I hadn't responded to the the voicemail they left on the first callback).
So here are the instructions (until they change the web site again...)
1. log into the primary account (not a subaccount)
2. click My Verizon
3. click My Services on the left
4. click Broadband Essentials and Extras (right under My Services)
5. click the Manage button next to My Subscriptions
6. click the Verizon Online Backup and Sharing xx MB button
The URL that it lands on is this:
https://vzsharing.verizon.net/application_biz/Secure/Home/Default.aspx

Correct MP3 parameters for minimize lossy-ness and file size

Hi folks,
Correct MP3 parameters for minimize lossy-ness so as to miminize file size.
I am given a voice recording file in 32k sample rate and bit depth = 16. On spectral frequency display I see that there is not much useful data beyond 3200Hz, which I can ignore.
If I change the sample rate to 11025, frequency range is about 5000Hz which adequately holds the valid range. Now my question is do I lose anything by downsampling the data? Does the downsampling alters some data in the 0-4000Hz range?
My second question is the default option while saving in .mp3 for a file with 11025 sample rate would be 32 Kbps, 11025 Hz. do I gain any quality by encoding to a higher say in 40Kbps or more? What is a best MP3 encoding option for voice only recordings.
Is MP3 more lossy than ACM/ADPCM?
Another off topic question-- Can I find a particular sound? Suppose I see a particular noise and selects that and take corrective measures now I would like to find out any other occurances of that type of noise in the whole file. I understand that exact match is not possible but can I search to find out somewhat similar sounds?
best wishes to you all,
Deeptish

If I change the sample rate to 11025, frequency range is about 5000Hz which adequately holds the valid range. Now my question is do I lose anything by downsampling the data? Does the downsampling alters some data in the 0-4000Hz range?
In theory, no. If you use a lousy resampling method you will achieve some intermodulation distortion, however Auditions sample rate conversion process is pretty on the dot.
Is MP3 more lossy than ACM/ADPCM?
Yes/No. MP3 and ADPCM (adaptive differential pulse-code modulation) are two vastly different technologies (incidently, the ACM simply stands for Audio Compression Manager, and simply means it's an ADPCM codec for Windows). ADPCM is based off PCM and works in the time-domain. It uses dynamic compression to reduce the dynamic range so the audio is able to be mapped to an 8-bit resolution without excessive quantization noise. Upon playback/decoding, the signal is expanded. The process is far from lossless, however, A-law and μ-law have been telecom stanards of ADPCM for carrying voice traffic for years.
My second question is the default option while saving in .mp3 for a file with 11025 sample rate would be 32 Kbps, 11025 Hz. do I gain any quality by encoding to a higher say in 40Kbps or more? What is a best MP3 encoding option for voice only recordings.
MP3 is an entirely different game. Unlike ADPCM which works on the signal in the time-domain...MP3 processes an stores it's audio in the frequency domain and using physcoacoustic models, removes information from the frequency domain to reduce the number of bits needed to store the audio. The frequency response of an MP3 is determined more by the bitrate than the samplerate. A MP3 that's about 55kbps VBR sampled at 22khz only has a frequency response of 7.5khz, however, that doesn't mean the audio less than 7.5 khz hasn't been modified. Physcoacoustics work over the entire signal, the higher frequencies are the first to go since physcoacoustics figure we'll miss them less...but it does remove audio from the signal in many other bands as well. Sample rate does play a role...some bitrates are not available for specific sampling rates; since a 64kbps file might have 8khz of bandwidth, it's deemeed "too much" for 11khz and is not a valid rate. A 128kbps mp3 using 44.1 and a 128kbps mp3 using 32khz will generally have about the same range of spectral response....save for newer encoders that can squeeze a couple of muddy khz in there. A 32kbps mp3, in practice, is acceptable for voice, there should be about 4khz of available bandwith, higher bitrates will naturally give you better quality.
Basically, either MP3 or ADPCM are lossy formats, they're just radically different implmentations of audio compression with thier own sets of advantages and disadvantages.

HR Report for finding details for the new hires and leavers

Dear All,
I am very new to SAP HR ABAP.
Need Help
I have to create a report which fetches all the details <Details are mentioned below>
for all the
1)     New hires
2)     Leavers
in between a time range.
<Details to be fetched :~
Title
Fax
Mobile
Nationality
Domicile
Religion
Passport
Place of issue
Issue date
Valid till
Date of Hire
Action Reason
Reporting to
Date of exit interview
Leave Date
Leaving Reason
Street
Address Line2
City
District
Region
Country
Postal Code
Communication Number
Personal ID
Date Of Last Hire
Location
Job
Payroll area
OrgLvl1
OrgLvl2
OrgLvl3
OrgLvl4
Personnel Number
Date of seniority
EEBankName
Bank account no
Bank account type
PERID
Thanks a lot !!!
Joy
Edited by: joydip majumder on Jul 11, 2008 10:46 AM

Hi joy ,
you can create ur own z-report for this requirement , for this u have to read the employee data with in the date rage for   infotype 0 (Action) for hiring and leaving dates. Other related infomation u can fetch from the related infotypes tables like PA0001 etc using simple select queries.All required fields can be dispalyed in the ALV output.
Regards
Lakhan
Edited by: lakhan on Jul 11, 2008 2:35 PM

Graphics driver details for MSI Z77MA-G45 and other motherboards

This is request for MSI to put more details of the on-board graphics capabilities.
My goal is to have four monitors by adding an additional PCIe graphics card.
Recent versions of Windows can only support multiple graphics cards if the drivers are essentially the same.
I would like to see enough information on the spec sheets for the integrated graphics so that I can decide what models of graphics cards I can buy so that Windows will work with my new card as well as the on-board graphics.
The spec sheet says Radeon but I think that there are many options in the Radeon family.
Thanks

Quote
This is request for MSI
Nice, but this is a Users-to-Users Forum so you are wrong here if an official MSI answer is wanted. >>How to contact MSI.<<
Quote
Recent versions of Windows can only support multiple graphics cards if the drivers are essentially the same.
What? Where have you read that. How should different vga adapters have the same driver. Windows 7 can handle different vga drivers

HT204266 Payment method declined, I've just entered details for a new MasterCard and still get the same message, frustrated as I cannot download apps!!!!!!

Payment method declined, I've entered in a new MasterCard after I got the payment declined message with my old MasterCard but still get same message with new card and I cannot download apps, someone pls help

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

Step by Step Guide Details for RFC to File and File to RFC scenario

Similar Messages

Maybe you are looking for