Step by step guide to implement SSL

Hi
Is there any PPT or PDF or BLOGS or any document that showing step by step procedure to implement SSL ?? Any links in this regard is highly appreciated
thanks
kumar

Kumar,
Check this document on how to configure this in J2EE engine:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/23894238-0701-0010-40b0-a0a6d5c4ad9f?prtmode=navigate
Regards,
---Satish

Similar Messages

Step by step process to implement SSL

I am new to SSL implementation. I would like to know the step by step process to implement SSL for a webpage. I have gathered few information about SSL and I am not clear as what exactly to be done.
My requirement:
I have learned how to create a certificate using keytool and I am not clear what has to be done after that. Let me put what I understood so far.
1. I should create a certificate using keytool at server side.
2. When the client requires the page I am not clear what should be done such as certificate verification etc., and how. Can anyone please tell me the exact procedure to implement the SSL.
Thanks in advance.....

You need to read the JSSE Reference Guide.

Step by Step guide to implement Active Dataguard 11g

Hi All,
Please suggest a good step by step guide to implement Oracle Active Dataguard on Oracle 11g, OS : RHEL 5.4
Have searched a couple of documents, but ending up with physical or logical dataguard setup guides...
Please suggest end to end steps guide for Active Dataguard Implementation
DB : Oracle 11g Release 2
OS : RHEL 5.4
Thanks

user1687821 wrote:
Hi All,
Please suggest a good step by step guide to implement Oracle Active Dataguard on Oracle 11g, OS : RHEL 5.4
Have searched a couple of documents, but ending up with physical or logical dataguard setup guides...
Please suggest end to end steps guide for Active Dataguard Implementation
DB : Oracle 11g Release 2
OS : RHEL 5.4
ThanksHi,
Active dataguard is option after configuring dataguard.
You can put standby database in Open(read only) mode also you can enable Recover(MRP) while open so this can be used for reporting purpose too.
Please refer below links for configuring them.
http://www.oracle-class.com/wp-content/uploads/2011/01/dataguard/11gR2%20Physical%20Data%20Guard%20Setup%20%20project,%20with%20Active%20Data%20Guard%20option.pdf
http://www.databasejournal.com/features/oracle/article.php/3834931/Using-Oracle-11gs-Active-Data-Guard-and-Snapshot-Standby-Features.htm
http://www.oracle-base.com/articles/11g/DataGuardSetup_11gR2.php
http://www.oracle.com/technology/deploy/availability/pdf/maa_wp_11gr1_activedataguard.pdf
HTH.

Any step-by-step guide for implementing intermediate event?

Hi All,
I am trying to implement intermediate event in my BPM and so far I have created:
1) An intermediate event
2) WSDL file
3) A message trigger
But I am not getting how to proceed further. In the following document I found that a context DO needs to be used: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0369539-e876-2d10-ef93-8f30e112ee6d?quicklink=index&overridelayout=true
But I am not sure which context it is referring to?
Is there any step-by-step guide to implement this? or any wiki link?
Ameya

Hi Ameya,
Follow below steps:
1. Create WSDL file
2. Create an intermediate event in process modeling screen
3. Click on Intermediate event> Properties>Event Trigger
4. TRIGGER Drop Down> New
5. Give Name to your Message Trigger>Next
6. SERVICE dropdown>Select the WSDL created> Finish.
And I suppose they have mentioned Data Object for using it in coorelation condition.
Correlation condition is a boolean test which should be True(default) for the ntermediate message to be triggered.
As there will be mutliple process instances, when PI (in your case) trigger the intermediate event (consume WS) we can give a correlation conditon to check whether it is for the right process instance.
In you case you can store the Request ID in BPM DO, and also request it from PI while consuming WS and validate it in correlation condition.
Regards,
Unni
Edited by: UnnikrishnanSreekumar on Oct 13, 2011 12:51 PM
Edited by: UnnikrishnanSreekumar on Oct 13, 2011 1:00 PM

Step by Step guide to implement Service Desk

Hi Gurus,
Can anyone send me the step by step guide to implement service desk solution include the configuration guide
please send to rsaravananr (at) gmaildotcom
Your help highly appreciatted and will assign point accordingly
Thank you

Hi
just have a look at following blogs
Service Desk Implementation Guide PART I
Service Desk Implementation Guide PART I
Regards,
Vijay.

TDMS Step-BY-Step Guide (HCM)

Hello experts,
could anyone please let me know where I can find a Step-By-Step Guide for
implementing the HCM-Scenario for TDMS?
Would be great if it could be more detailed than the operation and master guide.
Many many Thanks.
Regards Marco

Hi Marco,
There is no step by step guide for TDMS HCM, but you have a common guide for all TDMS Scenarios.
You can access the master and operations guide in the service market place.
You can follow the TDMS Master Guide for TDMS HCM information ( genrally the platform is same, but some of the activities differ). For specific activities in HCM, you can refer to the documentation for each activity. ( By selecting the activity in the process tree and selecting 'Activity Documentation' button on the toolbar. It displays a details information for each activity.
If you have any specific questions, do not hesitate to post them here.
Regards,
Prasanth

Step by Step Guide to SSHR

Dear Gurus
Iam implementing SSHR at my client. Does anybody has a link or document or any other source which can act as step by step guide to implement SSHR? i have implemented Core HR and Payroll and now its SSHR's turn. Any type of help will be appreciated
Thank you
Muhammad Noman Shafique Sheikh

Hi Muhammad,
Do you think this document alone will be enough to implement SSHR? i have limiited time. i would be helpful if you could provide me reference to a link for more direct assistance. The docs should be sufficient but for the one who is implementing it for the first time as you need more time in going through the docs/manuals and understand all the steps.
I do not think you will find any further docs/links available to refer to.
Thanks,
Hussein

Step-By-Step guides/links to implement SCVMM 2012 R2?

Are there any Step-By-Step guides/links to implement SCVMM 2012 R2?

That is pretty broad - not sure what you are looking for. Begin here:
http://technet.microsoft.com/en-us/library/gg610610.aspx
Applies To: System Center 2012 - Virtual Machine Manager, System Center 2012 R2 Virtual Machine Manager, System Center 2012 SP1 - Virtual Machine Manager
http://technet.microsoft.com/en-us/library/gg671824.aspx
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

Step-By-Step guides/links to implement Orchestrator

Any Step-By-Step guides/links to implement Orchestrator

Kevin Holman's 'Getting Started' guide is easy to follow and understand. It will help you stand up a lab or POC quickly:
http://blogs.technet.com/b/kevinholman/archive/2013/10/18/orchestrator-2012-r2-quickstart-deployment-guide.aspx

Step-By-Step guides/links to implement Service Manager

Step-By-Step guides/links to implement Service Manager

Can you provide step by step instructions to build a model of my house?
i'm not being flippant or joking, the problem is really down to building a model of your IT Department in Service Manager. There is no step by step guide to model your businesses unique processes and procedures.
If you want to stand up an environment, so you can get familiar with the product and start modeling your environment, then you might want to start with some of the
Test Lab Guides, or contact a consulting company who can help you plan and architect your service book, delivery model and finally your SCSM environment. FULL DISCLOSURE: I am
such a consultant, so I might just be advising you to go buy my services.

Step by step guide to create a RFC connection and data transfer

hi
could i get a step by step guide to transfer/read data from SAP and legacy system using the concept of RFC.
Regards
Shiva

hi
Here are the steps.
SM59 Transaction is used for Connection Establishment with Destination.
When you establish a connection to a client through a destination, the HTTP connection must first be entered in transaction SM59.
There are two types of HTTP connection in transaction SM59: Call transaction SM59 to display the different RFC destinations.
The HTTP connection to the external server (connection type G) and the HTTP connection to the R/3 system (connection type H) are different only in their logon procedures. Their technical settings are the same. To display the technical settings, double-click a connection.
You can choose from three tabs. Under Technical Settings, you can specify the following:
· Target Host: The host to which you want to connect.
Note that if you are using HTTPS as a protocol, you have to specify the full host name (with domain).
· Service No.: Here, you specify the port. The destination host must of course be configured in such a way that the specified port understands the corresponding protocol (HTTP or HTTPS). See Parameterizing the ICM and the ICM Server Cache.
· Path Prefix: At the time when the connection to this destination is initiated, the system inserts this sub-path before ~request_uri.
· HTTP Proxy Options: Here, you can configure a proxy for HTTP connections: You can determine the proxy host and service, as well as users and passwords for the HTTP connection.
The tab page Logon/Security will be different depending on whether you have selected a HTTP connection to an external server (connection type G) or a HTTP connection to an R/3 system (connection type H).
HTTP Connection to an External Server (Connection Type G)
Choose the connection you want to use. You can choose from the following logon procedures:
· No Logon: The server program does not request a user or password.
· Basic Authentication: The server program requests a user and password. Basic Authentication is a standard HTTP method for authenticating users. When a user logs on to the target system, he or she provides a user ID and password as authentication. This information is then sent in a header variable as a Base 64-encoded string to the server, through the HTTP connection.
· SSL Client Certificate: If you use client certificates for authentication, the client authentication is performed through the Secure Sockets Layer (SSL) protocol. In this case, you must also select the SSL Client PSE of the SAP Web AS that contains the relevant certificate for the authentication. The target system must handle the issuer of the SAP Web AS client certificate as a trusted system.
Under Logon/Security, you can also activate SSL to ensure that HTTPS is the protocol used (if you select SSL, make sure that the correct port is entered under Technical Settings). In the security transaction STRUST you can determine which type of SSL client is used. (Getting Started with the Trust Manager, Trust Manager).
The field Authorization for Destination has been implemented as an additional level of protection. We recommend that you specify a user and password for the RFC destination.
HTTP Connection to an R/3 System (Connection Type H)
Here, you can specify more settings for authentication in the target system.
The settings under Technical Settings and Special Options are the same as for connection type G. Under Logon/Security, the connection type H has additional logon procedures. As with external servers, you can activate and deactivate SSL and specify an authorization.
Because the target system is an SAP system, you can set the client and language for the logon as well as the user name and password. If you check Current User, you have to specify the password.
The following authentication procedures are available: Basic Authentication, SAP Standard, and SAP Trusted System, and SSL Client Certificate.
· HTTP Basic Authentication: Logon with user and password
· SAP Standard: This procedure uses an RFC logon procedure. The RFC Single Sign-On (SSO) procedure is valid within the one system. The same SAP user (client, language, and user name) is used for logon.
· SAP Trusted System: Trusted RFC logon to a different SAP system (see Trusted System: Maintaining Trust Relationships Between SAP Systems)).
· SSL Client Certificate: The SSL protocol enables you to use client certificates for the logon.
Type G/H (SM59)
Timeout:
When sending a HTTP request, you can use this parameter to specify the maximum response time for the connection.
HTTP Setting:
You can use the HTTP version to specify the protocol version of the HTTP request (HTTP 1.0 or 1.1).
Compression:
You can use this option to activate the gzip compression for the request body. This can only be activated in HTTP Version 1.1.
Compressed Response:
In the standard setting, the SAP Web Application Server sends the Accept Encoding field as a header field with the value gzip, if the application server can handle this compression. This notifies the partner that the caller can handle gzip decompression, and that the partner can send compressed data. If you want to prevent a compressed response being sent, choose the option No.
HTTP Cookie:
You can use this option to control the way received cookies are handled.
You can specify the following for cookies:
· Accept them automatically
· Reject them automatically
· Accept or reject them in a prompt
· Use a handler for the event IF_HTTP_CLIENT~EVENTKIND_HANDLE_COOKIE to process the cookies in the program.
· In the next section, you can read about the parallelization of requests.
Thanks,
vijay
reward points if helpful

Oracle 10gR2 WebService Call-In & Call-Out via PL/SQL (Step-by-Step Guide)

Hi Everyone,
This guide is for those of you who tried to Call-In and Call-Out WebService via Oracle 10gR2 using PL/SQL but failed a couple of times, re-installed a couple of times and retry, got it to work but don't know what made it work scenarios.
Hope this helps ;-)
Thanks,
Henry Wu
Instructions on how to use Oracle10gR2 Webservice Call-Out feature (Oracle JAX-RPC DII - Dynamic Invocation (DII) APIs)
PREREQUISITE
=================================================================
1. Download Oracle Database 10g Release 2 (10.2.0.1.0) (ZIP, ~655MB)
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201winsoft.html
http://download.oracle.com/otn/nt/oracle10g/10201/10201_database_win32.zip
1.1 Choose Enterprise Edition
2. Download 10.1.3.1 Callout Utility for 10g (R1 +R2) RDBMS (ZIP, ~13MB)
http://download.oracle.com/technology/sample_code/tech/java/jsp/dbws-callout-utility-10131.zip
2.1 Extract to C:\oracle\product\10.2.0\db_1\dbws_callout_utility_10131
3. Download OC4J Standalone - Oracle Containers for J2EE (OC4J) 10g Release 3 (10.1.3.3) (ZIP, ~93MB; Pure Java—runs on all certified platforms)
http://www.oracle.com/technology/software/products/ias/index.html (Download Site)
http://download.oracle.com/otn/java/oc4j/101330/oc4j_extended_101330.zip
3.1 Extract to C:\oracle\product\10.2.0\db_1\oc4j_extended_101330
STEP-BY-STEP PROCEDURES
=================================================================
1. Prepare the database
1.1 Connect to SYS account (or any account that can connect as SYSDBA)
1.2 alter system set shared_pool_size=96M scope=both
1.3 alter system set java_pool_size=80M scope=both
1.4 ALTER USER SCOTT ACCOUNT UNLOCK;
1.5 ALTER USER SCOTT IDENTIFIED BY "tiger";
1.6 ALTER USER SCOTT QUOTA UNLIMITED ON USERS;
1.7 GRANT PUBLIC TO SCOTT;
1.8 GRANT Create Public Synonym TO SCOTT;
2. Load Oracle SOAP client to SCOTT (for Oracle 10g Release 2 Database)
2.1 Commands
2.1.1 Open command prompt (cmd.exe)
2.1.2 loadjava -u scott/tiger -r -v -f -genmissing -s -grant public C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\webservices\lib\soap.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\lib\dms.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\jlib\javax-ssl-1_1.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\lib\servlet.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\lib\mail.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\lib\activation.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\lib\http_client.jar C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\lib\ejb.jar
2.1.3 It will take around 3 minutes and you will see "something" like the following when it completes (count may not be exact) :
Classes Loaded: 909
Resources Loaded: 75
Sources Loaded: 0
Published Interfaces: 0
Classes generated: 0
Classes skipped: 0
Synonyms Created: 984
Errors: 0
2.1.3 Close this command prompt
3. Load Oracle JAX-RPC client to SYS (for Oracle 10g Release 2 Database)
3.1 Commands
3.1.1 Open command prompt (cmd.exe)
3.1.2 loadjava -u sys/oracle -r -v -f -genmissing -s -grant public C:\oracle\product\10.2.0\db_1\dbws_callout_utility_10131\sqlj\lib\dbwsclientws.jar C:\oracle\product\10.2.0\db_1\dbws_callout_utility_10131\sqlj\lib\dbwsclientdb102.jar
3.1.2.1 It will take around 15 minutes and you will see "something" like following when it completes (count may not be exact) :
Classes Loaded: 4027
Resources Loaded: 81
Sources Loaded: 0
Published Interfaces: 0
Classes generated: 61
Classes skipped: 0
Synonyms Created: 4108
Errors: 0
3.1.3 Close this command prompt
4. Execute UTL_DBWS packages to SYS (for Oracle 10g Release 2 Database)
4.1 Commands
4.1.1 Connect to SYS account only
4.1.2 Execute the following (in TOAD you should execute them as Script, press the "thunder" button)
4.2.1 @"C:\oracle\product\10.2.0\db_1\dbws_callout_utility_10131\sqlj\lib\utl_dbws_decl.sql"
4.2.2 @"C:\oracle\product\10.2.0\db_1\dbws_callout_utility_10131\sqlj\lib\utl_dbws_body.sql"
4.2.3 CREATE PUBLIC SYNONYM utl_dbws FOR sys.utl_dbws;
5. Call-out a free Web Service using SCOTT
5.1 Commands
5.1.1 Connect to user SCOTT with password of TIGER
5.1.2 Copy and Paste the following "Anonymous Block" (sample #1) and execute it :
5.1.2.1 It sould return "PL/SQL DII client return ===> Redwood City"
declare
service_ utl_dbws.SERVICE;
call_ utl_dbws.CALL;
service_qname utl_dbws.QNAME;
port_qname utl_dbws.QNAME;
operation_qname utl_dbws.QNAME;
string_type_qname utl_dbws.QNAME;
retx ANYDATA;
retx_string VARCHAR2(1000);
retx_double number;
retx_len number;
params utl_dbws.ANYDATA_LIST;
l_input_params utl_dbws.anydata_list;
l_result ANYDATA;
l_namespace VARCHAR2(1000);
begin
-- open internet explorer and navigate to http://webservices.imacination.com/distance/Distance.jws?wsdl
-- search for 'targetNamespace' in the wsdl
l_namespace := 'http://webservices.imacination.com/distance/Distance.jws';
-- search for 'service name' in the wsdl
service_qname := utl_dbws.to_qname(l_namespace, 'DistanceService');
-- this is just the actual wsdl url
service_ := utl_dbws.create_service(HTTPURITYPE('http://webservices.imacination.com/distance/Distance.jws?wsdl'), service_qname);
-- search for 'portType name' in the wsdl
port_qname := utl_dbws.to_qname(l_namespace, 'Distance');
-- search for 'operation name' in the wsdl
-- there will be a lot, we will choose 'getCity'
operation_qname := utl_dbws.to_qname(l_namespace, 'getCity');
-- bind things together
call_ := utl_dbws.create_call(service_, port_qname, operation_qname);
-- default is 'FALSE', so we make it 'TRUE'
utl_dbws.set_property(call_, 'SOAPACTION_USE', 'TRUE');
-- search for 'operation soapAction' under <wsdl:operation name="getCity">
-- it is blank, so we make it ''
utl_dbws.set_property(call_, 'SOAPACTION_URI', '');
-- search for 'encodingstyle' under <wsdl:operation name="getCity">
utl_dbws.set_property(call_, 'ENCODINGSTYLE_URI', 'http://schemas.xmlsoap.org/soap/encoding/');
-- search for 'binding style'
utl_dbws.set_property(call_, 'OPERATION_STYLE', 'rpc');
-- search for 'xmlns:xs' to know the value of the first parameter
-- under <wsdl:message name="getCityResponse"> you will see the line <wsdl:part name="getCityReturn" type="xsd:string" />
-- thus the return type is 'string", removing 'xsd:'
string_type_qname := utl_dbws.to_qname('http://www.w3.org/2001/XMLSchema', 'string');
-- in the line <wsdl:operation name="getCity" parameterOrder="zip">
-- the parameterOrder is 'zip', thus we put in 'zip'
-- the 'ParameterMode.IN' is used to specify that we will be passing an "In Parameter" to the web service
-- the 'ParameterMode.IN' is a constant variable in the sys.utl_dbws package
utl_dbws.add_parameter(call_, 'zip', string_type_qname, 'ParameterMode.IN');
utl_dbws.set_return_type(call_, string_type_qname);
-- supply the In Parameter for the web service
params(0) := ANYDATA.convertvarchar('94065');
-- invoke the web service
retx := utl_dbws.invoke(call_, params);
-- access the returned value and output it to the screen
retx_string := retx.accessvarchar2;
dbms_output.put_line('PL/SQL DII client return ===> ' || retx_string);
-- release the web service call
utl_dbws.release_service(service_);
end;
5.1.3 Copy and Paste the following "Anonymous Block" (sample #2) and execute it :
5.1.3.1 It should return "PL/SQL DII client return ===> twelve thousand three hundred and forty five"
declare
service_ utl_dbws.SERVICE;
call_ utl_dbws.CALL;
service_qname utl_dbws.QNAME;
port_qname utl_dbws.QNAME;
operation_qname utl_dbws.QNAME;
string_type_qname utl_dbws.QNAME;
retx ANYDATA;
retx_string VARCHAR2(1000);
retx_double number;
retx_len number;
params utl_dbws.ANYDATA_LIST;
l_input_params utl_dbws.anydata_list;
l_result ANYDATA;
l_namespace VARCHAR2(1000);
begin
-- open internet explorer and navigate to http://www.dataaccess.com/webservicesserver/numberconversion.wso?WSDL
-- search for 'targetNamespace' in the wsdl
l_namespace := 'http://www.dataaccess.com/webservicesserver/';
-- search for 'service name' in the wsdl
service_qname := utl_dbws.to_qname(l_namespace, 'NumberConversion');
-- this is just the actual wsdl url
service_ := utl_dbws.create_service(HTTPURITYPE('http://www.dataaccess.com/webservicesserver/numberconversion.wso?WSDL'), service_qname);
-- search for 'portType name' in the wsdl
port_qname := utl_dbws.to_qname(l_namespace, 'NumberConversionSoap');
-- search for 'operation name' in the wsdl
-- there will be a lot, we will choose 'NumberToWords'
operation_qname := utl_dbws.to_qname(l_namespace, 'NumberToWords');
-- bind things together
call_ := utl_dbws.create_call(service_, port_qname, operation_qname);
-- default is 'FALSE', so we make it 'TRUE'
utl_dbws.set_property(call_, 'SOAPACTION_USE', 'TRUE');
-- search for 'operation soapAction' under <operation name="NumberToWords">
-- it is blank, so we make it ''
utl_dbws.set_property(call_, 'SOAPACTION_URI', '');
-- search for 'encodingstyle'
-- cannot find xml tag 'encodingstyle', so we just use the following as the generic encoding style
utl_dbws.set_property(call_, 'ENCODINGSTYLE_URI', 'http://schemas.xmlsoap.org/soap/encoding/');
-- search for 'binding style'
-- although 'document' was used, it produced an error, thus we will use 'rpc'
-- this value is generally only 'document' or 'rpc'
utl_dbws.set_property(call_, 'OPERATION_STYLE', 'rpc');
-- search for 'xmlns:xs' to know the value of the first parameter
-- under <xs:element name="NumberToWords"> you will see the line <xs:element name="ubiNum" type="xs:unsignedLong" />
-- thus the return type is 'unsignedlong', removing 'xs:'
-- however, upon testing, using 'unsignedlong' produced an error, while 'string' did not, so we will use 'string'
string_type_qname := utl_dbws.to_qname('http://www.w3.org/2001/XMLSchema', 'string');
-- under <xs:element name="NumberToWords"> you will see the line <xs:element name="ubiNum" type="xs:unsignedLong" />
-- the element name is 'ubiNum', thus we put in 'ubiNum'
-- the 'ParameterMode.IN' is used to specify that we will be passing an "In Parameter" to the web service
-- the 'ParameterMode.IN' is a constant variable in the utl_dbws package
utl_dbws.add_parameter(call_, 'ubiNum', string_type_qname, 'ParameterMode.IN');
utl_dbws.set_return_type(call_, string_type_qname);
-- supply the In Parameter for the web service
params(0) := ANYDATA.convertvarchar('12345');
-- invoke the web service
retx := utl_dbws.invoke(call_, params);
-- access the returned value and output it to the screen
retx_string := retx.accessvarchar2;
dbms_output.put_line('PL/SQL DII client return ===> ' || retx_string);
-- release the web service call
utl_dbws.release_service(service_);
end;
NOTES AND REFERENCES
=================================================================
This detailed step-by-step guide was produced with the following guide http://www.oracle.com/technology/sample_code/tech/java/jsp/callout_users_guide.htm
I could still not load Oracle JAX-RPC client to SCOTT (step 4) as it produces an error. See the following for more details :
http://forums.oracle.com/forums/thread.jspa?threadID=633219&tstart=0
Also, I could not consume some of the other free Web Services out there for reasons I don't know, hope someone can help clarify. See the following for more details :
http://forums.oracle.com/forums/thread.jspa?threadID=630733&tstart=0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Instructions on how to use Oracle10gR2 Webservice Call-In feature
PREREQUISITE
=================================================================
1. Download Oracle Database 10g Release 2 (10.2.0.1.0) (ZIP, ~655MB)
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201winsoft.html
http://download.oracle.com/otn/nt/oracle10g/10201/10201_database_win32.zip
1.1 Choose Enterprise Edition
2. Download OC4J Standalone - Oracle Containers for J2EE (OC4J) 10g Release 3 (10.1.3.3) (ZIP, ~93MB; Pure Java—runs on all certified platforms)
http://www.oracle.com/technology/software/products/ias/index.html (Download Site)
http://download.oracle.com/otn/java/oc4j/101330/oc4j_extended_101330.zip
2.1 Extract to C:\oracle\product\10.2.0\db_1\oc4j_extended_101330
STEP-BY-STEP PROCEDURES
=================================================================
1. Connect to SYS account and create user STORE
CREATE USER store IDENTIFIED BY store;
GRANT connect, resource TO store;
2. Connect to Oracle using the user STORE and password STORE
CONNECT store/store;
3. Execute the following objects for this excercise
CREATE SEQUENCE order_sq;
CREATE TABLE product_types (
product_type_id INTEGER
CONSTRAINT product_types_pk PRIMARY KEY,
name VARCHAR2(10) NOT NULL
CREATE TABLE products (
product_id INTEGER
CONSTRAINT products_pk PRIMARY KEY,
product_type_id INTEGER
CONSTRAINT products_fk_product_types
REFERENCES product_types(product_type_id),
name VARCHAR2(30) NOT NULL,
description VARCHAR2(50),
price NUMBER(5, 2)
CREATE TABLE customers (
customer_id INTEGER
CONSTRAINT customers_pk PRIMARY KEY,
first_name VARCHAR2(10) NOT NULL,
last_name VARCHAR2(10) NOT NULL,
dob DATE,
phone VARCHAR2(12)
CREATE TABLE orders (
order_id INTEGER
CONSTRAINT orders_pk PRIMARY KEY,
product_id INTEGER
CONSTRAINT purchases_fk_products
REFERENCES products(product_id),
customer_id INTEGER
CONSTRAINT purchases_fk_customers
REFERENCES customers(customer_id),
quantity INTEGER NOT NULL
INSERT INTO customers (
customer_id, first_name, last_name, dob, phone
) VALUES (
1, 'John', 'Brown', '01-JAN-1965', '800-555-1211'
INSERT INTO product_types (
product_type_id, name
) VALUES (
1, 'Book'
INSERT INTO products (
product_id, product_type_id, name, description, price
) VALUES (
1, 1, 'Modern Science', 'A description of modern science', 19.95
COMMIT;
CREATE OR REPLACE PACKAGE dbfunc AS
FUNCTION place_order (
p_product_id INTEGER,
p_customer_id INTEGER,
p_quantity INTEGER
RETURN VARCHAR2;
END dbfunc;
CREATE OR REPLACE PACKAGE BODY dbfunc AS
FUNCTION place_order (
p_product_id INTEGER,
p_customer_id INTEGER,
p_quantity INTEGER
RETURN VARCHAR2 IS
v_customer_count INTEGER;
v_product_count INTEGER;
v_order_id INTEGER;
BEGIN
-- count the number of products with the
-- supplied p_product_id (should be 1 if the product exists)
SELECT COUNT(*)
INTO v_product_count
FROM products
WHERE product_id = p_product_id;
IF v_product_count = 0 THEN
RETURN 'No such product';
END IF;
-- count the number of customers with the
-- supplied p_customer_id (should be 1)
SELECT COUNT(*)
INTO v_customer_count
FROM customers
WHERE customer_id = p_customer_id;
IF v_customer_count = 0 THEN
RETURN 'No such customer';
END IF;
-- get the next value from orders_sq
SELECT order_sq.nextval
INTO v_order_id
FROM dual;
-- place the order
INSERT INTO orders (
order_id, product_id, customer_id, quantity
) VALUES (
v_order_id, p_product_id, p_customer_id, p_quantity
COMMIT;
RETURN 'Order placed with id of ' || v_order_id;
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
RETURN 'Order not placed';
END place_order;
END dbfunc;
4. Install and Configure OC4J
4.1 Change Directory
4.1.1 Open command prompt (cmd.exe)
4.1.2 CD C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\bin
4.2 Configure Environment variables (type in command prompt)
4.2.1 set JAVA_HOME=C:\oracle\product\10.2.0\db_1\jdk
4.2.2 set ORACLE_HOME=C:\oracle\product\10.2.0\db_1\oc4j_extended_101330
4.3 Starting OC4J for the first time
4.3.1 oc4j -start
4.3.2 If this is not your first time to "start" oc4j, go to step 4.3.4
4.3.3 Set oc4jadmin password (use the password "oracle" w/o the quotation marks)
08/03/21 17:13:54 Set OC4J administrator's password (password text will not be displayed as it is entered)
Enter password:
Confirm password:
Confirm password: The password for OC4J administrator "oc4jadmin" has been set.
08/03/21 17:14:01 The OC4J administrator "oc4jadmin" account is activated.
4.3.4 OC4J has started if you see the message :
08/03/21 17:14:16 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
4.3.5 Leave this command prompt open
4.4 Configure Data Source
4.4.1 Open a new command prompt via the cmd.exe command
4.4.2 type "hostname" and then press enter
4.4.3 Keep this command prompt open for later use
4.4.4 Open Windows Explorer and navigate to the folder C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\config
4.4.5 Open the file data-sources.xml
4.4.6 Modify and Save the file so that it will look something like the following :
4.4.6.1 Note that "hpv2710us" is my hostname found in step 4.4.2
4.4.6.2 Note that "ORCLDEV" is the name of my Oracle Instance. (Default installation uses ORCL only)
<connection-pool name="Example Connection Pool">
<connection-factory factory-class="oracle.jdbc.pool.OracleDataSource"
user="store"
password="store"
url="jdbc:oracle:thin:@//hpv2710us:1521/ORCLDEV">
</connection-factory>
</connection-pool>
4.4.7 Close the text editor
4.4.8 Close the Windows Explorer
4.4.9 Close this command prompt (type exit)
5. Publishing a PL/SQL Package as a Database Web Service
5.1 Create the config.xml file
5.1.1 Open Notepad.exe
5.1.2 Copy and Paste the following :
5.1.2.1 Note that "hpv2710us" is my hostname found in step 4.4.2
5.1.2.2 Note that "ORCLDEV" is the name of my Oracle Instance. (Default installation uses ORCL only)
<web-service>
<display-name>PLSQL Web Service</display-name>
<description>PLSQL Sample</description>
<destination-path>./dbfunc.ear</destination-path>
<temporary-directory>/tmp</temporary-directory>
<context>/plsqlsample</context>
<stateless-stored-procedure-java-service>
<jar-generation>
<schema>store/store</schema>
<db-url>jdbc:oracle:thin:@hpv2710us:1521:ORCLDEV</db-url>
<prefix>db.func.place.order</prefix>
<db-pkg-name>dbfunc</db-pkg-name>
</jar-generation>
<uri>/dbfunc</uri>
<database-JNDI-name>jdbc/OracleDS</database-JNDI-name>
</stateless-stored-procedure-java-service>
<wsdl-gen>
<wsdl-dir>wsdl</wsdl-dir>
<option name="force">true</option>
<option name="httpServerURL">http://localhost:8888</option>
</wsdl-gen>
<proxy-gen>
<proxy-dir>proxy</proxy-dir>
<option name="include-source">true</option>
</proxy-gen>
</web-service>
5.1.3 Save file as config.xml in the directory C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\config
5.1.3.1 Note it should be config.xml and not config.txt
5.1.4 Close the text editor
5.2 Publish dbfunc Oracle Package as a Web Service
5.2.1 Open a new command prompt via the cmd.exe command
5.2.2 CD C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home
5.2.3 mkdir ear
5.2.4 CD ear
5.2.5 set ORACLE_HOME=C:\oracle\product\10.2.0\db_1\oc4j_extended_101330
5.2.6 set CLASSPATH=.;%ORACLE_HOME%\webservices\lib\wsdl.jar;%ORACLE_HOME%\lib\xmlparserv2.jar;%ORACLE_HOME%\soap\lib\soap.jar
5.2.7 java -jar %ORACLE_HOME%\webservices\lib\WebServicesAssembler.jar -config C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\config\config.xml
Please wait ...
STORE.DBFUNC
5.2.8 java -jar %ORACLE_HOME%\j2ee\home\admin_client.jar deployer:oc4j:localhost:23791 oc4jadmin oracle -deploy -file C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home\ear\dbfunc.ear -deploymentName dbfunc
08/03/21 17:46:23 Notification ==>Application Deployer for dbfunc COMPLETES. Operation time: 296 msecs
5.2.9 java -jar %ORACLE_HOME%\j2ee\home\admin_client.jar deployer:oc4j:localhost:23791 oc4jadmin oracle -bindWebApp -appname dbfunc -webModuleName dbfunc_web
5.2.10 java -jar %ORACLE_HOME%\j2ee\home\admin_client.jar deployer:oc4j:localhost:23791 oc4jadmin oracle -bindAllWebApps -appname dbfunc
5.2.11 Close this command prompt (type exit)
6. Test dbfunc Web Service
6.1 Restart OC4J
6.1.1 Open the command prompt you used to start OC4J in step 4.1.1/4.3.1
6.1.2 In the keyboard, hit Ctrl+C
6.1.2.1 Type "Y" and then hit Enter
08/03/21 18:02:51 Shutting down OC4J...
Terminate batch job (Y/N)? Y
6.1.2.2 Note that the command prompt should still be open
6.1.2.2.1 If you accidentally closed the command prompt just do the following
6.1.2.2.1.1 Do 4.1.1 to 4.2.2 and then proceed to 6.1.3
6.1.3 oc4j -start
Starting OC4J from C:\oracle\product\10.2.0\db_1\oc4j_extended_101330\j2ee\home...
08/03/21 18:07:57 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
6.1.4 Leave this command prompt open
6.2 Use the Web Service to "Order an Item"
6.2.1 Connect to Oracle using the user STORE and password STORE
6.2.2 select * from orders
6.2.2.1 Zero row should return
6.2.3 Open Internet Explorer
6.2.4 Navigate to http://localhost:8888/plsqlsample/dbfunc
6.2.5 Input the following :
6.2.5.1 param0 value: 1
6.2.5.2 param1 value: 1
6.2.5.3 param2 value: 10
6.2.6 Click the Invoke button
6.2.7 A pop-up window will appear having the following contents :
<?xml version="1.0" encoding="UTF-8" ?>
- <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- <SOAP-ENV:Body>
- <ns1:placeOrderResponse xmlns:ns1="http://db.func.place.order/dbfunc.wsdl" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<return xsi:type="xsd:string">Order placed with id of 1</return>
</ns1:placeOrderResponse>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
6.2.8 Go back to SQLPLUS or Toad and execute "select * from orders" again
6.2.8.1 There should be one row
ORDER_ID, PRODUCT_ID, CUSTOMER_ID, QUANTITY
1, 1, 1, 10
NOTES AND REFERENCES
=================================================================
This detailed step-by-step guide was produced with the following article by Jason Price http://www.oracle.com/technology/pub/articles/price_10gws.html

Success!!!
I had to grant this permissions:
call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.lang.RuntimePermission', 'getClassLoader', '' );
call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.lang.RuntimePermission', 'accessClassInPackage.sun.util.calendar', '' );
call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.lang.RuntimePermission', 'setFactory', '' )
call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.util.PropertyPermission', 'HTTPClient.socket.idleTimeout', 'write' );
call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.net.SocketPermission', 'localhost', 'resolve' );
call dbms_java.grant_permission( 'WS_TEST', 'SYS:java.net.SocketPermission', '127.0.0.1:8084', 'connect,resolve' );
As I wrote earlier, WS_TEST is my user into which I load JAX-RPC client. Note that, if you load JAX-RPC client into user another than SYS, you have NOT to use -s -grant public option (wassam wrote about this too). Another thing is that I (finally) didn't load OC4J. To consume WebService I use utl_dbws.invoke(call_Handle CALL, request SYS.XMLTYPE) function.
voytec001

Could you Please Send me the Step by Step guide for the BADI

Hi ABAPers,
Could you Please Send me the Step by Step guide for the BADI.It is very Urgent
Thanks & Regards,
Ashok.

Each BAdI has a definition and more than one implementation. The definition means the methods(in class concept) that are used for performing various functions. The BAdI definition can be viewed in SE18 transaction(for standard ones) and user-defined BAdIs can be created in the same transaction as well.
When you create a BAdI definition, an class interface will be automatically created and you can define your methods in the interface. The implementation of the methods can be done in SE19 transaction .
YOu can go through these links...
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
just refer to the link below. it will of great help to u.
http://www.sapmaterial.com/?gclid=CN322K28t4sCFQ-WbgodSGbK2g
(SAP link- ultimate material )
suppose your working for XK01 then for that the BADI being VENDOR_ADD_DATA then this implemetation procedure.
Steps:
1. Execute Business Add-In(BADI) transaction SE18
2. Enter BADI name i.e. VENDOR_ADD_DATAand press the display
button
3. Select menu option Implementation->Create
4. Give implementation a name such as Z_VENDOR_ADD_DATA
5. You can now make any changes you require to the BADI within this
implementation, for example choose the Interface tab
6. Double click on the method you want to change, you can now enter
any code you require.
7. Please note to find out what import and export parameters a
method has got return the original BADI definition
(i.e. VENDOR_ADD_DATA) and double click on the method name
for example within VENDOR_ADD_DATA contract is a method
8. When changes have been made activate the implementation
BADI(Business Add-In) is the object oriented method of user exits...
Each BAdI has a definition and more than one implementation. The definition means the methods(in class concept) that are used for performing various functions. The BAdI definition can be viewed in SE18 transaction(for standard ones) and user-defined BAdIs can be created in the same transaction as well.
When you create a BAdI definition, an class interface will be automatically created and you can define your methods in the interface. The implementation of the methods can be done in SE19 transaction
Intro.....
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
Check these links for info about badi..
BADI's
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
BADI's
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://www.esnips.com/web/BAdI
http://www.allsaplinks.com/badi.html
New to Badi
Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction.
Business Add-Ins
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits (SMOD/CMOD [Page 40]), two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-system infrastructure (SAP and customers), but instead allow for multiple levels of software development (by SAP, partners, and customers, and as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time.
In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example). All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard.
A single Business Add-In contains all of the interfaces necessary to implement a specific task. In Release 4.6A, program and menu enhancements can be made with Business Add-Ins. The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects
DEFINING THE BADI
1) execute Tcode SE18.
2) Specify a definition Name : ZBADI_SPFLI
3) Press create
4) Choose the attribute tab. Specify short desc for badi.. and specify the type :
multiple use.
5) Choose the interface tab
6) Specify interface name: ZIF_EX_BADI_SPFLI and save.
7) Dbl clk on interface name to start class builder . specify a method name (name,
level, desc).
Method level desc
Linese;ection instance methos some desc
8) place the cursor on the method name desc its parameters to define the interface.
Parameter type refe field desc
I_carrid import spfli-carrid some
I_connid import spefi-connid some
9) save , check and activateadapter class proposed by system is
ZCL_IM_IM_LINESEL is genereated.
IMPLEMENTATION OF BADI DEFINITION
1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.
2) Specify aname for implementation ZIM_LINESEL
3) Specify short desc.
4) Choose interface tab. System proposes a name fo the implementation class.
ZCL_IM_IMLINESEL which is already generarted.
5) Specify short desc for method
6) Dbl clk on method to insert code..(check the code in AAA).
7) Save , check and activate the code.
Some useful URL
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
Now write a sample program to use this badi method..
Look for BBB sample program.
AAA
data : wa_flights type sflight,
it_flights type table of sflight.
format color col_heading.
write:/ 'Flight info of:', i_carrid, i_connid.
format color col_normal.
select * from sflight
into corresponding fields of table it_flights
where carrid = i_carrid
and connid = i_connid.
loop at it_flights into wa_flights.
write:/ wa_flights-fldate,
wa_flights-planetype,
wa_flights-price currency wa_flights-currency,
wa_flights-seatsmax,
wa_flights-seatsocc.
endloop.
BBB
*& Report ZBADI_TEST *
REPORT ZBADI_TEST .
tables: spfli.
data: wa_spfli type spfli,
it_spfli type table of spfli with key carrid connid.
*Initialise the object of the interface.
data: exit_ref type ref to ZCL_IM_IM_LINESEL,
exit_ref1 type ref to ZIF_EX_BADISPFLI1.
selection-screen begin of block b1.
select-options: s_carr for spfli-carrid.
selection-screen end of block b1.
start-of-selection.
select * from spfli into corresponding fields of table it_spfli
where carrid in s_carr.
end-of-selection.
loop at it_spfli into wa_spfli.
write:/ wa_spfli-carrid,
wa_spfli-connid,
wa_spfli-cityfrom,
wa_spfli-deptime,
wa_spfli-arrtime.
hide: wa_spfli-carrid, wa_spfli-connid.
endloop.
at line-selection.
check not wa_spfli-carrid is initial.
create object exit_ref.
exit_ref1 = exit_ref.
call method exit_ref1->lineselection
EXPORTING
i_carrid = wa_spfli-carrid
i_connid = wa_spfli-connid.
clear wa_spfli.
u can find BADI's in different ways...
1>First go to any transaction->iN THE menu bar SYSTEM->STATUS->Get the program name ->double click->u will go to the program attached to the tcode.Now search term will be CALL CL_EXITHANDLER.Now u will get list of BADI'S available..
2>Goto SE24->Give class name as CL_EXITHANDLER->Display->double click on get_instance mathod->Now u will go inside the method->Now put break point on the cl_exithandler.Now go to any transaction code and pass dat..U will see that it will be stopped on the break point which u set on the cl_exithandler...In the exit name u can find list of badi's attached to the tcode..
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
The simplese way for finding BADI is
1. chooes Tcode Program & package for that Tcode.
2. Go to Tcode se18
3. Press F4
4. search by package or by program.
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
and
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
Badihttp://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm
sample code for Purchase requisition
BAdI Name: ZPUR_RFQ (Implementation name) Purchase Requisitions
Definition Name: ME_REQ_POSTED
Interface Name : IF_EX_ME_REQ_POSTED
Implementing Class: ZCL_IM_PUR_REQ
Method : POSTED
METHOD if_ex_me_req_posted~posted .
DATA : v_mtart TYPE mtart.
DATA l_s_eban TYPE ueban.
LOOP AT im_eban INTO l_s_eban.
IF l_s_eban-estkz NE 'B'.
CLEAR v_mtart.
SELECT SINGLE mtart INTO v_mtart FROM mara WHERE matnr = l_s_eban-matnr.
IF v_mtart EQ 'ZERS' OR v_mtart EQ 'FHMI' OR v_mtart EQ 'UNBW'.
MESSAGE e000(zm_msg) WITH 'You are not allowed' 'to create PR for stock items'.
ENDIF.
ENDIF.
IF l_s_eban-knttp NE 'F' OR l_s_eban-pstyp NE '9'.
IF l_s_eban-knttp NE 'A'.
IF ( l_s_eban-pstyp NE '9' AND l_s_eban-pstyp NE 'D' ) AND l_s_eban-matnr EQ
space.
MESSAGE e000(zm_msg) WITH 'You cannot create' 'a PR without material number'.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDMETHOD.
Reward points for useful Answers
Reward if it helps..

HR Security Step by step guide

Hi,
Can any one help me with HR Security Implementation, I am looking for some step by step guide , as I am new for HR. please help its urgent
Regards
Puneet

Hi Puneet,
Your question is broad and without an idea of your system setup, its hard to provide an answer that would meet your needs.
The previous post has provided you with some documentation, some helpful tips for you would be getting familiar with some of the HCM transactions, such as PA20/30, PO03, PO10, PO13, PPOSE to see what data and relationships are availble to users.
I would then have a look at some of the common HR authorisation objects that can be used, such as PLOG, P_PERNR, P_PCLX, etc you can access these by going to PFCG > Environment > Auth Objects > Display... read the documentation against them. Note that some auth objects need to be turned on for checking in the system if you want them to be used.. P_PERNR is one of them..
Restricting users by what data they should see is important, you need to determine whether you want to use structural authorisations (PD profiles) or not. This could rely on whether your organisation is currently maintaining the organisational structure? There are advantages of Structural auths and many disadvantages. Check transaction OOSP and OOSB, one of these will allow you to create a PD Profile and limit it to HR Objects...
The best way to get familiar with all this is by setting up a test user and test role. (trial and error).
Obviously there are a lot of factors that you need to consider when attempting a HR security build, but I hope some of this information will point you in the right direction.
Cheers
Nathan
Australia
P.s I won't charge you step by step for this information

Is there a step by step guide to connecting a Drupal website with SQL Azure?

The company is upgrading the Drupal website and the goal is to have a live database by connecting the Drupal SQL database with he SQL Azure database. Does anyone have guide/step by step process for implementing connectivity between Drupal and SQL Azure?

Hi,
Thanks for posting here.
Recommend you to see "
Best Practices for Drupal CMS on Azure Websites " written by Sunitha Muthukrishna which talks about How to migrate existing Drupal site to Azure Websites and Copy database to MySQL in Azure Web Sites
" Mysqldump " tool is one of the preffered approaches to Copy database to MySQL in Windows Azure Web Sites
Here is another document that talks about Migrating Drupal to azure and
Copy the Database which might help.
Hope this helps you.
Girish Prajwal

Step by step guide to implement SSL

Similar Messages

Maybe you are looking for