Step By Step Help need in order to set up Cisco Works LMS

Error I obtain can be seen below.
IPMProcess or IpmDbEngine.
It may be down or not yet up. Please make sure processes are up and running
I think my software needs setting up from the ground up.
regards
Carl Williams

Post the output of the pdshow command from this server. On what platform and OS version did you install LMS? How much memory does this server have?

Similar Messages

Some help needed on Order-to-cash process

Hi Gurus,
i need some insight on how to use/config the Order-to-cash process.
if someone could help me out in this, it would be greatly appreciated.
Thanks in advance
Poorna.

Hi,
Please find info on
https://wiki.sdn.sap.com/wiki/display/ERPLO/SD%20Configuration
http://help.sap.com/saphelp_erp60_sp/helpdata/en/8c/df293581dc1f79e10000009b38f889/content.htm
Thanks,
Vrajesh

Urgent - help needed in order to complete brochure by end of today..

Hello,
I'm trying to finishing designing a brochure in Indesign. When I import a cut out image from photoshop into Indesign it always gives it a white background, how do I remove the white background? help desperately needed, deadline 4 this is the end of today..
Thanks,
mot4

Use the Black arrow (Selection tool) to select the frame. The White arrow (Direct Select tool) selects the content. With the frame selected, set the fill color to [None]. I have to say, though, that it requires a LOT of work and planning ahead to get anything other than a fill of None in an image frame. You must either be placing into a pre-existing frame that has a fill applied, or you must use an undocumented feature to create a special object style to add a default fill to a new image frame created on the fly. Out of the box, image frames are ALWAYS no fil, no stroke when drawn, regardless of what might be set for default stroke and fill applied to shapes.Dragging from Bridge should be giving a default frame unless you drop inside something pre-drawn.
You said you have a transparent Layer 0 in Photoshop. Do you have more than one layer? If so let's try turning off everythign except the piano. Right click the image in ID and choose "Object Layer Options" and you can turn inidvidual layers on or off in ID. Try turnning off visibility for everythign except the layer with the cutout piano.

Help needed (Release Order from ME29N)

Hello,
We are facing problem while releasing the purchase order from transaction me29n. System is generating an email saying Update terminated with following message:
Update was terminated
System ID.... UD5
Client....... 052
User..... RCT3982
Transaction.. ME29N
Update key... 4791B513A7FB732CE1000000AC1A4586
Generated.... 22.01.2008, 11:36:02
Completed.... 22.01.2008, 11:36:03
Error Info... XS 826: Cannot process message, no route from & to &
Please guide what do I need to do to release an order via ME29N
Kind Regards,
Abhi.

Hi Dear
Yes i have tried you suggestion. But still not able to release the PO.
Is there some problem with the release strategy.
ME28 is also not working...
regards,
Abhi

Urgent help needed - Process order api error

Hi All,
I am having a problem with implementing process order api. I have all the necessary details, but i couldn't get working. I think the problem might be with global initialization or with api parameter declaration. I am posting the code so any help might be helpful.
Any help is urgently required and greatly appreciated.
Thanks
srinivas
Edited by: user2138419 on Feb 6, 2010 4:21 PM

Hi,
I solved the above issue and I thought may be this would be helpful to others. I solved the process order issues through assisgming proper responsibility and proper org_id under which you are booking orders. If we have these tow correct, then most of the issues will be rectified..

Ubuntu Unity: help needed in order to succesfully build it

Unity (now on AUR) can't be built right now due to the fact that some of it's dependencies can't be built. For example, nux-bzr. It doesn't find "glewmx", even though it's currently installed.
If there are any suggestions, please post them here, so that we could have something that works.

Hmm, *that* fixes the glewmx pkgconfig detection
package() {
cd glew-${pkgver}
make GLEW_DEST="${pkgdir}/usr" install
ln -s "${pkgdir}/usr/lib/libGLEW.so.${pkgver}" "${pkgdir}/usr/lib/libGLEWmx.so.${pkgver}"
ln -s "${pkgdir}/usr/lib/libGLEW.so.${pkgver}" "${pkgdir}/usr/lib/libGLEWmx.so"
cd ${pkgdir}/usr/lib/pkgconfig && mv glew.pc glewmx.pc
sed -i s'/glew/glewmx/g' glewmx.pc
sed -i s'/GLEW/GLEWmx/g' glewmx.pc
And it can be found by nux-bzr, BUT new problem
checking pkg-config is at least version 0.9.0... yes
checking for NUX_CORE... yes
checking for NUX_IMAGE... yes
checking for NUX_MESH... no
configure: error: Package requirements (glib-2.0 >= 2.25.14
gdk-pixbuf-2.0
glew
glewmx
) were not met:
No package 'glew' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables NUX_MESH_CFLAGS
and NUX_MESH_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
glewmx must COEXIST with glew. But glewmx in AUR conflicts with glew.
Huh...
OH,
cd ${pkgdir}/usr/lib/pkgconfig && mv glew.pc glewmx.pc
I replaced mv with cp and we have both "glew.pc" and "glewmx.pc", so nux-bzr can detect it. Continuing...
Last edited by flamelab (2010-12-05 17:29:31)

Help needed on how to set up Global Nav in Dreamweaver so that changes need to be made only once and will be reflected throughout the site.

Hi,
I've created a site with global navigation across the top (drop down menus) and some global buttons on the left side. Is there a way to code this type of global navigation in Dreamweaver so that people making changes to the site need only make them once (not on every page!) and have them reflected throughout the site? I'm using Dreamweaver MX to create the site.
Thanks to this forum I know that Server Side Includes is a way to handle this but I'd like to use Dreamweaver if possible.
Thanks!

As Murray suggested, templates are the way to go (though not really recommended for a fairly large site) - here's a link to some help docs to help you get started.
http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WScbb6b82af5544594822510a94ae8d65-7acda .html
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
Book: Ultimate CSS Reference
http://www.sitepoint.com/launch/005dfd4/3/133
http://twitter.com/nadiap

Help needed with Mac Server set up

Hi
I have purchased a mini mac server, that i want to use as a replacement for my windows home server, for basic back ups & to run a website with possible remote access.
At the initial configuration screen where if you manually configure your connection via ethernet, after putting the desired internal ip, sub net, router and DNS, it should find my domain on the next page where the server would be named. this does not happen, ( this is where i need the help )
I have a domain name
fixed external ip with my it pointing to my domain name
and a RDNS setup with my ISP
Any help?
you can email me directly : [email protected]
many thanks

If you're running NAT, well, you have some choices on how you might choose to [set up DNS services|http://labs.hoffmanlabs.com/node/1436]. Once you get that sorted, there's a link there to the set-up for the public-facing (outside your external firewall) network configuration, too.

Urgent help need:How inventory system and fulfillment system work

Hi Every one ,
I have an requirement to work on inventory and fulfillment system,below are my questions,
1)I have stock level quantity for an sku is 2 ,if one user done with his order with quantity of 2 then how we can show quantity to the second customer (if stock not available we gone loss the business )
how we can handle this ?
2)There are few orders are completed(if some are orders are having quantity available in stock some or backorders)
here how the fulfillment system understand those orders and how it will update the inventory.
Could you please any one help me how to work on above requirements or else give me some other solutions to full fill above .
Regards,
Jyothi Chidurala
Edited by: Jyothi.mj on May 22, 2013 5:08 AM
Edited by: Jyothi.mj on May 23, 2013 4:28 AM

>
1)I have stock level quantity for an sku is 2 ,if one user done with his order with quantity of 2 then how we can show quantity to the second customer (if stock not available we gone loss the business )
how we can handle this ?
you can always call InventoryManager.AVAILABILITY_STATUS_IN_STOCK to check whether the item is available in inventory , It is the business call if item not available how they want to handle this .
hope this helps

Help needed moving iPod music from home to work PC

I have a shuffle that I have had for some time, but never used. I want to fill it up on my home PC then plug it in to my work PC and listen to the music. I heard this isn't possible and that I have to load software on my work PC (which is not allowed) in order to listed to the iPod AND that once I open the iPod on my work PC, where the music was NOT originally from, the iPod will be reset and I will lose all of my music (however it will remain on the computer I originally downloaded from).
Is this true?
If not, after I load up my iPod shuffle at home, how do I then play that music from my work PC?
Thank you!
Shuffle

Am I correct that you want to listen to the songs you have on the shuffle through your work computer's speakers?
(An alternative would be to use headphones, which won't work in some offices, or a dock/external speakers thing.)
One way, if your computers have an audio in jack, would be to connect the shuffle there, from its headphone jack. That would take a male-male cable, mini plug on the shuffle's end and probably mini plug on the computer's end.
In red67's case, it sounds like an option might be to put copies of the music files into the iTunes Library on work computer. To do that, you'll need to copy the files onto CD or flash drive (including the shuffle, with disk use enabled and appropriately sized). If the songs were purchased from iTMS, you'll have to authorize the computer on first use. Then, play the songs with iTunes and use the shuffle for something else.
In beckylv775's, it sounds like your IT folks have your system locked up a bit tighter, but if your computer has an audio in jack, that should still work.
I haven't tried any of these, but good luck.
srb

Major help needed! Saving iPhoto book as a working file

I am a student teacher and I am teaching a lesson on Friday that uses iPhoto book. My cooperating teacher has asked me to create an iPhoto book template for the students to use to make the activity easier for them. I have created the template book but realized I have no idea how to save it as a working file that can be transferred from one computer to the students' laptops.
I know there are some tutorials from a user named Old Toad for this; however, I am not typically a mac user, so I found those directions sort of confusing. I need very clear and explicit directions on how to do this if I can. Thanks so much.

Welcome to the Apple Discussions.
The Photobooks are templates.
The only way to move a book to another computer is to move the Library that contains it. This is because the book is an entry in the database and there is no ay to share it.
Regards
TD

Help needed, example (serial port) streams module not working.

I am trying to make work the tblt.c example of a streams module on Solaris 8.
This sample is the one provided by Sun in it's Driver Dev. Kit.
My test program gets blocked in the I_PUSH ioctl (after having successfully
poped ttcompat and ldterm).
Debug prints in the module tell me that the tbltopen() stays in the loop
     * Now wait for it. Let our read queue put routine wake us up
     * when it arrives.
     while (tbltd->tbltd_flags & TBLT_IOCWAIT) {
          if (!qwait_sig(q)) {
               lwp_error = EINTR;
               goto error;
done, after
iocb = (struct iocblk *)mp->b_wptr;
     iocb->ioc_count = sizeof (struct iocblk);
     cb = (struct termios *)datap->b_wptr;
     cb->c_iflag = 0;
     cb->c_oflag = 0;
     cb->c_cflag = CREAD|CS8|B9600;
     cb->c_lflag = 0;
     bzero((caddr_t)cb->c_cc, NCCS);
     datap->b_wptr += sizeof (*cb)/(sizeof (*datap->b_wptr));
     mp->b_cont = datap;
     tbltd->tbltd_flags |= TBLT_IOCWAIT;     /* indicate that we're */
     tbltd->tbltd_iocid = iocb->ioc_id;     /* waiting for this response */
     (void) putnext(WR(q), mp);
(used to set baudrate, I suppose)
and only a Ctlr-C of my test prog. makes it return via
lwp_error = EINTR;
               goto error;
A few years ago, I had no trouble with the same Solaris 5 example.
and my hardware (tablet + cable) works fine on a Solaris 5 system.

darren,
thanks for your help here and over on comp.sys.solaris. ultimately the problem was portmon on ttya, and i think i know how it happened. the machine was set up with a keyboard and monitor, and ttya was enabled using admintool. later, with the machine headless, the console was changed over to ttya via eeprom, which produced the conflict i noted above.
solution:
# pmadm -l
PMTAG PMTYPE SVCTAG FLGS ID <PMSPECIFIC>
zsmon ttymon ttyb u root /dev/term/b I - /usr/
bin/login - 9600 ldterm,ttcompat ttyb login: - tvi925 y #
zsmon ttymon ttya u root /dev/term/a - - /usr/
bin/login - 9600 ldterm,ttcompat neo ttya login: - vt100 y #Terminal
# pmadm -d -p zsmon -s ttya
# pmadm -l
PMTAG PMTYPE SVCTAG FLGS ID <PMSPECIFIC>
zsmon ttymon ttyb u root /dev/term/b I - /usr/
bin/login - 9600 ldterm,ttcompat ttyb login: - tvi925 y #
zsmon ttymon ttya ux root /dev/term/a - - /usr/
bin/login - 9600 ldterm,ttcompat neo ttya login: - vt100 y #Terminal
# echo $TERM
sun-color
# svccfg
svc:> select system/console-login
svc:/system/console-login> setprop ttymon/terminal_type = "vt100"
svc:/system/console-login> exit
# echo $TERM
vt100
also see
http://www.bordergatewayprotocol.net/jon/helpful_stuff/solaris/solaris-advanced-sysadmin-guide/ch09/181-186.html

Help needed - Headers and footers of subtemplates not working.

Hi,
I need to call 3 different subtemplates from the main template. Headers and footers of these subtemplates are differenet. When i call these subtemplates headers and footers is not getting displayed.
Can anyone please suggest how to display the headers and footers of subtemplates when called from another template.
Thanks.

Hi,
Thanks for your reply. Do you mean to call the headers and footers from the main template or in the sub template. I cant call in the main template because the headers and footers are different for each template. I used micrsosoft headers and footers in sub templates. But it didnt work. So created header and footer templates in the sub template and called them from the same sub templates using the call: statements. But when i run the prog am getting the below warning.
Beginning post-processing of request 35618954 on node DSOTEST6HE at 15-FEB-2010 03:37:41.
Post-processing of request 35618954 failed at 15-FEB-2010 03:37:42 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Note: am running the running prog from XML Publisher responsinilty and not from BIEE standalone.
Thanks.

Help needed on command authorization set

Dear Sir,
on my ACS v 3.2 windows server, I have configured group A and created one user in it as B, I want this user B to have helpdesk profile i.e. he should only access show commands but it is strange to discover when B type enable he moves in to enable mode (it ask for enable password), I want to restrict B from using enable command, pls.find below mentioned my router client aaa config:-
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication login enable group tacacs+ enable
aaa authentication ppp default local group radius
aaa authorization exec default group tacacs+ local
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 1 default start-stop group tacacs+
aaa accounting commands 7 default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa accounting connection default start-stop group tacacs+
aaa session-id common
Kindly suggest client and server config to accomplish the needful task.

Thats because this is not done at from router level. Such as above your configuration above says to use a tacacs server and if it fails then authenticate and authorize local. So as long as the router can access the tacacs server it will pass it off to the tacacs server for it make that decision and from there pass it back to the router. In other words make your access authorization settings on the ACS server not the router. The router is set up fine as long as you have the tacacs-server command in there specifing what server to use with a key.

Help Needed with Ipod classic set up...

i have recently been given an ipod classic 80gb and tried to install the new version of itunes...when i tried to load it up it says that the pc isnt suitable for that version.
i ended up installing itunes version 7.4, i had no problem with this until it said a upgrade was avaible for my ipod. i downloaded this and installed it and now when i connect my ipod it says THE IPOD "ST" CANNOT BE USED BECAUSE IT REQUIRES VERSION 7.6 OR HIGHER.
I know that 7.6 or higher wont work so how do i get back to what i was using before which was just version 7.4.
i have tried deleting it from the pc and installing it again but it still says ipod "st" cant be used...i dont even know what ipod 'ST' means.
any help is appriacted

I just purchased the 120GB iPod last week and I am experiencing the same issue. My iPod randomly skips songs while halfway through, and if I go back and play a song that had just skipped a moment before, then it plays through all the way. It is VERY frustrating and if Apple does not provide a fix and respond to this serious problem, then I'm going to return my iPod and get a Zune.
BTW I did not mean this post as a response to SaintMike.
Message was edited by: Haneyg

Step By Step Help need in order to set up Cisco Works LMS

Similar Messages

Maybe you are looking for