Step by step Installation ON ABAP,XI,Web dynpro ABAP and JAVA On my PC??

Hello Friends,
  I would like to Install SAP-ABAP ,XI ,Web dynpro ABAP and Web dynpro   JAVA    on my PC.
  Please Let me know What configuration is required for all the above.
  Please Give me the Step by step procedure for all the above.....??
  I want to Instal all the above and Give me suggestion on that???
  Can I use Vista for Sap Installation????
It would be great If you send the step by step procedure to my personal ID
[email protected]
Thanks in Advance
Preethi D

Hi,
Step step description here is not possible.
It always advisable to go to service.sap.com/instguides.
slow and steady wins the race.
good luck.
It's advisable to have quad processor with atleast 8GB ram.
If it's a nw04s then at a shot you can select AS ABAP. JAVA, EP, PI(XI) and proceed.
hope this helps you.
reward suitable points.

Similar Messages

  • E-Recruiting u0096 Web Dynpro ABAP UI u0096 Button, Tab, RMP steps Color change.

    Hi,
    I need to change the color of Heading, buttons, Tabs and Road Map Pattern steps in Web Dynpro ABAP UI for external candidate. I’m looking into WDA component ‘HRRCF_C_STARTPAGE’ to change the color of Heading, buttons, Tabs and Road Map Pattern.
    I would appreciate for your valuable input.
    also i need to change the Loago. Is logo is configurable through IMG path (SPRO)?
    Do let me know, if you need anything else.
    See -> Error - when opening/downloading 'NW04SP14EclipseThemesEditor.zip'.
    Regards,
    ...Naddy
    Edited by: Naddy on May 14, 2008 11:06 PM

    Hi Naddy,
    Export the them from the file system of portal through BSP_UPDATE_MIMEREPOS and  change it then import the theme using BSP_UPDATE_MIMEREPOS program and apply the theme.
    go through this links hope these help you to solve your probelm.
    [url]http://help.sap.com/saphelp_nw2004s/helpdata/en/4e/7feef553415e4fb357e80f7a6223b1/content.htm [url]
    [url]http://help.sap.com/saphelp_nw04s/helpdata/en/43/d8e0a488ef05f6e10000000a11466f/content.htm [url]
    [url]/people/sergio.ferrari2/blog/2007/04/06/bsphowto--customizing-the-design-of-system-logon-page-in-netweaver-04 [url]
    [url]/people/sergio.ferrari2/blog/2007/02/16/sap-web-ashowto--customizing-the-design-of-system-logon-page-new-options-of-the-netweaver-04s [url]

  • Leave request in Web Dynpro Abap - team Calendar

    Dear Guru's
    We are upgrading SAP from V4.7 to ECC 6 and have activated ESS Web dynpro ABAP for the leave request.
    We have activated the Business Function HCM_ESS_WDA_1
    Time management module all the configuration is done.
    ESS configuration on the node Employee Self-Service (Web Dynpro ABAP) > >> Team Calendar is done for the following
    Create Rule Groups
    Specify Absences to Be Displayed
    Specify Color Display of Absences
    I am Able to apply for leave and view the tabs Calendar, Time account and Leave request.
    *However for the team calendar i'm getting the error *
    The following error text was processed in system PRD : Exception condition "COMMUNICATION_ERROR" raised.
    The error occurred on the application server PANTHEON_PRD_00 and in the work process 5 .
    The termination type was: RABAX_STATE
    Please advice if there is any thing else that i can do to fix this issue.
    Thanks
    Keshini

    there is the IGS issue, please check the note 1527176 and ensure IGS is installed correctly for team calendar to display
    You can check your patch level as follows:
    - Start transaction SA38 (or SE38)
    - Run the report GRAPHICS_IGS_ADMIN
    - Choose the RFC destination, IGS_RFC_DEST should be the default
    - Select Status
    Could you please check again if you follow correctly step by step the
    instructions from SAP note:
    454042 - IGS: Installing and Configuring the IGS ?
    See section 7. " Specify your destination as the program ID:"
    Please leave the Gateway host and Gateway Service empty (See note 798937
    and Section 8/9 of note 454042)
    check the notes and communication to IGS server
    931900     Finding the IGS patch level
    896400     Upgrade your integrated IGS 7.x installation
    844669     Profile parameter of IGS as of Version 7.x
    798937     IGS not accessible after NW04 installation
    514841     Troubleshooting when a problem occurs with the I
    454042     IGS: Installing and Configuring the IGS
    63930      Gateway registration of RFC server program

  • NW 7.3 + iView from remote source wizard + R3 Web Dynpro ABAP, not working

    Hi,
    I think this forum is my last resort.
    I'm running NetWeaver 7.3 Enterprise Portal and also have an existing ECC6 on backend.
    Our ABAP Programmer has built some WD4A application on ECC, I'd like to made them available
    on EP as ABAP WebDynpro iView.
    From the document, I know the way to create ABAP WD iView is different since 7.3. I have to use "iView from remote source" to do it.
    On EP side, I have made an system alias (test ok) for ECC, assigned permission, provide mapping id/pwd, and test. 
    On ABAP side, all webdynpro app are activated (T-code sicf, /sap/bc/webdynpro, /sap/public/bc/webdynpro...). I can even test WAS by bringing up browser and access some sample ABAP webdynpro .
    However, I cannot success on "iView from remote source" wizard and it always show me "Nothing found. Check your search Criteria.".   Eventhough I use "*" as search criteria.
    Anyone has the similar situation ? I even doubt that it is a placeholder of a feature , not working for now. Anyone made it work on NW 7.3 ?
    More detail:
    My System Alias for ECC:   
          Application Host: myr3.mydomain.com
          SAP Client: 600
          SAP System ID:   DEV
          SAP System Number: 00
          Server Port:  <leave it blank>
          System Type: SAP_R3
          Logon Method:  UIDPW
          User Mapping Type: admin,user
          ICM Host: myr3.mydomain.com:8000
          ICM Protocol: http
          ICM URL prefix: <leave it blank>
          SAP Netweaver AS Description: <leave it blank>
    All other fileds are leave it as default value
    I also assign a group to have "read" and "user" permission to this system
    Also assign Alias to the system.
    I also create a user belong to the group, assign his system mapping an ECC user ID & PWD to it.
    I tested the System alias, it is working (both WEB AS  test, and R3 test)
    Then I try to create an iView on EP, under a PCD folder , new->iview->iview from remote source. A wizard show up. Then I can select the ECC alias just created, and provide * as application search criteria, and then select "WEB DYNPRO ABAP" as the application type. Then "GO"
    as I mentioned, it always show "Nothing Found. Check your search crieteria"
    But I'm sure the web dynpro applications are activated on R3.
    OK, that's it, please help this one. Thanks
    IF YOU DID MAKE IT WORK ON YOUR NW 7.3, PLEASE DROP A LINE HERE SO I KNOW IT IS MY OWN PROBLEM !!!
    Edited by: Wilson KU on Nov 14, 2011 10:42 AM
    Edited by: Wilson KU on Nov 14, 2011 10:46 AM

    Thanks for the reply,
    [About Backend]
    I feel confident about the backend R3 system because I can use the WAS URL to access the sample WD4A application, for example, I can bring up the wd4a application ui in my browser. It is purely browser and R3 stuff, no EP involved.
    http://soeprdev.mydomain.com:8000/sap/bc/webdynpro/bobf/demo_sales_order?sap-client=600&sap-language=ZF
    I also already activate all nodes and sub-nodes (in SICF Services) under /sap/bc/webdynpro as well as /sap/public/bc/webdynpro. (and some other nodes to make icon and include work)
    [About the system object in EP]
    I have done all kind of test on the system object (alias):
    1. In EP System Administration -> Landscape Configuration, I select the system object, click "Test Connection", It shows me a Check mark, and the detail message is SOE_DEV_600 connection
    2. Edit the System object, then click on "Connection Tests" page, I see two lines there, check both and click test, here is the result:
    SAP Web AS Connection:
    : Test Details:
    The test consists of the following steps:
    1. Check the validity of the system ID in the system object
    2. Check if the system can be retrieved
    3. Check if the system object has a valid system alias
    4. Check if an SAP system is defined in the system object
    5. Validate the following parameters: Web AS protocol; Web AS hostname
    6. Checks if the host name of the server can be resolved.
    7. Pings the Web AS Ping service (works only if the service is activated on the Web AS, and only on ABAP Web AS)
    8. Check HTTP/S connectivity to the defined back-end application
    Results
    1. The system ID is valid
    2. System retrieved successfully
    3. Retrieval of the default alias was successful
    4. The system object represents an SAP system
    5. The following parameters are valid: ICM Protocol (http) ICM Host Name (soeprdev.mydomain.com:8000)
    6. The host name (soeprdev.mydomain.com) was resolved successfully
    7. The Web AS ping service http://soeprdev.mydomain.com:8000/sap/bc/ping was pinged successfully
    8. An HTTP/S connection to http://soeprdev.mydomain.com:8000 was obtained successfully.
    Connection Test for Connectors:
    : Test Details:
    The test consists of the following steps:
    1. Retrieve the default alias of the system
    2. Check the connection to the back-end application using the connector defined in this system object
    Results
    Default alias retrieved successfully
    Connection successful

  • Problem in web dynpro ABAP program

    There are 2 input fields on first view carrid, connid and one "GO" Button
    1) "FLIGHTINFO" is the node under context of first view
    2) " FLIGHTTAB "  is a node under context of component controller having cardinality " 0..n " ,Dictionary structure "SFLIGHT" (i have selected only these many attributes " carrid, connid, fldate, planetype, seatsmax and seatsocc " )
    3) I have created  Method "FLIGHTTAB_FILL" in component controller to fill context node FLIGHTTAB
    Insert the source code for doing the following:
    -     Navigate to context node FLIGHTINFO
    -     Get element at lead selection for context node FLIGHTINFO
    -     Get CARRID and CONNID 
    -     Fill an internal table with all datasets from database table SFLIGHT, who meet the constraints for CARRID and CONNID.
    -     Navigate to context node FLIGHTTAB
    -     Bind the internal table(having all standard fields of sflight ) to the context node FLIGHTTAB ( having those 6 attributs).
    4) On action GO ->Implement the invocation of Method " FLIGHTTAB_FILL".
    5) I have mapped node FLIGHTTAB to context of OUTPUTVIEW.  Display table on view OUTPUT_VIEW (for this i hav used code wizard).
    Problem: after entering values of connid & carrid I m getting proper entries in internal table. but output view is not at all trigger (although i have created plugs). Is it necessary that while binding internal table with context node FLIGHTTAB  should have same no of fields (i.e. in this case 6 )?
    I am a fresher, My concept of bindings and cardinality are not so clear so can anybody help me out? 
    Thanx in advance for replying.

    Hi johnright ,
        No i dont think it is necessary that while binding internal table with context node should have same no of fields as the internal table . You might get some improper values in the corresponding fiels but it will not lead to any error.
      In your OUTPUTVIEW once you created the table UI element in layout and you bind it to FLIGHTTAB node you dont have to use any code wizard method to display the values. If the node contains values it will display automatically. (in your case you are filling it in step #).
    Check :-
    1. In your On action GO after filling the table you are firing the out bound plug :-
        WD_THIS->FIRE_INITIAL_OUT_PLG(
    2.All outbound plug and inbound plug are link properly and every thing is ACTIVATED.
    If still unable to find the error try to debug method wise and find where the error occurs and reply to us.
    Binding:-
    In web dynpro ABAP you will not able to get any value of any variable outside of any method. Here we use context node which is referrence that we create reference to any particular structure we required. Now to hold the values you need to bind
    the values of your internal table to the context node.
    If the node is in view then its values are visible to all the local method of the view.
    If the node is in component controller then  the you bind a value to the node from one view and you can get it in another view.
    Remember binding and mapping are not same.
    Mapping is done between node like inthe second scenario i have explained you need to create a node in view controller and then you need to map it to the corresponding view of component controller to send values across view.
    cardinality:-
    Each node contains data fields that represent one of the following:
        An individual instance of an object type
        A table of instances.
    This property of a node is known as its cardinality of table of instances.
    If you need table instance :- 0..n or 1...n
       In case of 1...n one default value is created. generally we use this as mainly we need to work with table.
    In case you need a individual instance of a object or like you want value like a structure only :-  0...1 or 1....1.
    Thanks & Regards,
    Monishankar C

  • Adding attachments to workflow from Web Dynpro ABAP Application program.

    Hi,
    workflow is supposed to start by a Web Dynpro ABAP Application.
    The user can attach files to it.
    A superior is supposed to review the files and either approve or reject the request.
    I tried the following in Web Ddynpro ABAP:
    CALL FUNCTION 'EWW_WORKFLOW_START'
    EXPORTING
    X_TASK = 'WS90000074'
    IMPORTING
    Y_WORKFLOW_ID = lv_WF_ID
    TABLES
    X_CONTAINER = lv_IT_CONTAINER
    EXCEPTIONS
    then followed by:
    CALL FUNCTION 'SAP_WAPI_ATTACHMENT_ADD'
    EXPORTING
    WORKITEM_ID = lv_wf_id
    ATT_HEADER = lv_swr_att_header
    ATT_BIN = Item_FILENAMEATTACHED
    DOCUMENT_OWNER = SY-UNAME
    LANGUAGE = SY-LANGU
    IMPORTING
    ATT_ID = lv_swr_att_id
    The Workflow has only one user decision step and one notification Step.
    In the user decision step, there is a binding from ATTACHOBJECTS to the task.
    But, in the log, you can see the attachment in the Workflow Container of the workflow instance, but you don't see it in the task (neither Inbox nor UWL)
    I have checked the binding it is correct. I am getting the attachment in workflow container in '_attach_objects' element. but this attachment has to go to the user decision step, so I am binding the '_attach_objects' of workflow container to '_attach_objects' of user decision step. But the attachment was not going to user decision step.
    Could you please let me know where am i doing wrong?
    Thanks,
    V.Nagaraju

    @Ruslim Chang 
       Sorry to point out but the FM will return the Workitem ID only so there is no problem with the LV_WF_ID variable.
    @vundralla nagaraju
    Instead of making binding between attachobjects make binding between
    WiGroup_ID <---- attachobjects
    and then on the next step you try to make biniding in the user decision step by using WiGroup_ID.I think it should work.

  • Problem with Table display in Adobe Form of Web Dynpro ABAP

    Hi Team,
    I'm trying to display a table in Adobe Print Form (not interactive). The table is bound to the context node in the Web Dynpro ABAP where the cardinality is 0:N. I get a short dump. Don't know what to do here. I'm able to display individual fields from my context successfully. Looks like something is missing when I try to display a table. Any pointers to display a data table in Adobe? Any step by step example you know of where I can find out what I did wrong? Many thanks for your time
    We are on support pack SP06 on 2004S release.
    DUMP INFORMATION:
    Short text                                                               
        Access via 'NULL' object reference not possible.                 
    What happened?                                                           
        Error in the ABAP Application Program  The current ABAP program "CL_WD_ADOBE_SERVICES==========CP" had to be terminated because it has come across a statement that unfortunately cannot be executed.
    An exception occurred that is explained in detail below.                    
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not caught in procedure "CREATE_PDF" "(METHOD)", nor was it propagated by a RAISING clause.

    Hi Thomas,
    We upgraded our system(2004S) to SP10 so that we can use the ADOBE form printing in Web Dynpro ABAP but could not apply note 1034425 because of the validity constraints in SNOTE. All the pre-requisite notes are already in the system apart from one note 1029721 which talks about supporting input helps. We don't want to use input helps in our system and cannot upgrade to SP11 because of problems with Business functionality.
    Questions:
    1) Is note 1034425 absolutely dependent on 1029721?
    2) If NOT, can someone please correct the validity so that we can implement using SNOTE.
    3) Would it be OK if we manually apply the changes specified in 1034425 without implementing 1029721?
    4) If all of the above is not applicable, is there any other note which fixes the above mentioned short dump.
    Your help in this matter will greatly help us in using the ADOBE services provided by SAP WDA.
    Thanks much

  • Integration of Adobe Flex with SAP Web Dynpro ABAP

    I am new to adobe flex development. i am following a tutorial prepared by
    Mr. Karthikeyan Venkatesan (Infosys Technologies Limited) Integration of Adobe Flex with SAP Web Dynpro ABAP-for ABAPers
    He used flex 3 to develop the flex application. i am using flex 4 downloaded from adobe(At a time Build release I used low version only 3.5). I followed all the steps. At a time of Run the data was not came.
    How to fetch the data?
    Please Guide how to proceed.

    Hi Laxmikanth,
    For Adebo Flex help..
    Please go through Thomas tutorial..
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10989ef6-968c-2b10-50a9-eb34a5267163&overridelayout=true
    and ...
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/307b434f-ff32-2b10-e885-991247270480?quicklink=index&overridelayout=true
    Hope it might helps you
    Thanks,
    Kris.

  • Search Help on Adobe Interactive Form with Web Dynpro ABAP

    Hi All,
    I have created Adobe Interactive Form with ZCI type and XML based interface type using Webdynpro ABAP.
    I placed a text field USER_NAME on the form ( data element is linked to search help USER_COMP ).
    Added Native WD UI element 'Value Help' to form to search for users and changed script
    *var fieldName = "INSERT_NAME_HERE*"; to var fieldName = "USER_NAME";
    The problem is that when I click on the value help button, nothing happens.
    Is any more additional steps required ?
    Thanks
    Karu

    Hello
    Check this
    F4 Value Help on Adobe Interactive Form with Web Dynpro ABAP
    Thanks
    Anirudh

  • Smart forms in web dynpro abap

    how to use smart forms in web dynpro abap ????
    what are the steps??

    Hi Ankit,
    1.create a node(Eg:PDF)  with attribute(SOURCE type xstring )  
    2.use Interactiveform UI element in the view
    3.Bind the pdfSource property of the UI to the attribute SOURCE
    4.in method write logic for call the smart form
      Pass the output of the smartform function call to
      function module CONVERT_OTF to convert it to PDF data.
    method displaypdf .
    data : l_x(1) value 'X'.
    data: lv_text type char3,
    lv_syucomm type char1,
    ls_pdf type xstring,
    lv_fm_name type rs38l_fnam,
    lv_control_parameters type ssfctrlop,
    lv_output_options type ssfcompop,
    lv_ssf_output type ssfcrescl,
    lt_otfdata type table of itcoo.
    data:
    node_input1 type ref to if_wd_context_node,
    elem_input1 type ref to
    if_wd_context_element,
    stru_input1 type
    ig_componentcontroller=>element_zinput.
    * navigate from <CONTEXT> to <INPUT1> via lead selection
    node_input1 = wd_context->get_child_node( name
    ig_componentcontroller=>wdctx_zinput ).
    * get element via lead selection
    elem_input1 = node_input1->get_element( ).
    * get all declared attributes
    elem_input1->get_static_attributes(
    importing
    static_attributes = stru_input1 ).
    call function 'SSF_FUNCTION_MODULE_NAME'
    exporting
    formname = 'ZSMARTFORM_NAME'
    importing
    fm_name = lv_fm_name
    exceptions
    no_form = 1
    no_function_module = 2
    others = 3
    if sy-subrc <> 0.
    * Error MESSAGE
    endif.
    * Set relevant control parameters
    lv_control_parameters-getotf = l_x. "OTF output
    lv_control_parameters-no_dialog = l_x. "No print dialog
    lv_control_parameters-preview = space. "No preview
    * Set relevant output options
    lv_output_options-tdnewid = l_x. "Print parameters,
    lv_output_options-tddelete = space. "Print parameters,
    call function lv_fm_name
    exporting
    * ARCHIVE_INDEX * ARCHIVE_INDEX_TAB *
    ARCHIVE_PARAMETERS control_parameters = lv_control_parameters
    * MAIL_APPL_OBJ * MAIL_RECIPIENT * MAIL_SENDER
    output_options = lv_output_options
    user_settings = space
    pernr = stru_input1-zpernr
    reinr = stru_input1-zreinr
    pdvrs = stru_input1-zpdvrs
    importing
    * DOCUMENT_OUTPUT_INFO job_output_info = lv_ssf_output
    * JOB_OUTPUT_OPTIONS exceptions
    formatting_error = 1
    internal_error = 2
    send_error = 3
    user_canceled = 4
    others = 5
    if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
    with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    refresh lt_otfdata.
    lt_otfdata[] = lv_ssf_output-otfdata[].
    call function 'SSFCOMP_PDF_PREVIEW'
    exporting
    i_otf = lt_otfdata
    exceptions
    convert_otf_to_pdf_error = 1
    cntl_error = 2
    others = 3.
    if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
    with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    data: l_dummy type standard table of tline,
    pdf_data type xstring,
    pdf_size type i.
    clear: pdf_data, pdf_size.
    * convert otf to pdf
    call function 'CONVERT_OTF'
    exporting
    format = 'PDF'
    importing
    bin_filesize = pdf_size
    bin_file = pdf_data
    tables
    otf = lt_otfdata[]
    lines = l_dummy
    exceptions
    err_max_linewidth = 1
    err_format = 2
    err_conv_not_possible = 3
    others = 4.
    if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
    with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    data:
    node_pdf type ref to if_wd_context_node,
    elem_pdf type ref to
    if_wd_context_element,
    stru_pdf type
    if_componentcontroller=>element_pdf ,
    item_source like stru_pdf-source.
    * navigate from <CONTEXT> to <PDF> via lead selection
    node_pdf = wd_context->get_child_node( name if_componentcontroller=>wdctx_pdf ).
    * get element via lead selection
    elem_pdf = node_pdf->get_element( ).
    * set single attribute
    elem_pdf->set_attribute(
    exporting
    name = `SOURCE`
    value = pdf_data ).
    endmethod.
    Thanks
    Chinnaiya P

  • How to find the BADI'S in Web Dynpro ABAP

    Hi Experts,
    I'm new to Web Dynpro ABAP. Can any one tell me, how to find the BADI'S for standarad components like i.e DEMO_ROADMAP .Please tell me, steps/procedure to find the BADI'S in WDA.
    Thanks ,
    Chaitanya
    Moderator message: wrong forum, please have a look in the "Web Dynpro ABAP" forum.
    Edited by: Thomas Zloch on Jun 18, 2011 4:30 PM

    Hi Nagaraju,
    There is another fool-proof method to find BADIs while executing a transaction -
    1. Goto transaction SE80
    2. Select "Class / Interface", type in the class name CL_EXITHANDLER and 'Enter"
    3. On the method GET_INSTANCE, create a Breakpoint just after the call to cl_exithandler=>get_class_name_by_interface at the following line - 
    <i>CASE sy-subrc.</i>
    Once the breakpoint has been set, call the transaction you wish to find the BADI for and you will notice that the debugger opens everytime a BADI is about to be called. You could get the name of the BADI from the the value of the variable "EXIT_NAME".
    CL_EXITHANDLER is a service class that is called by standard SAP code everytime a BADI is about to be called. So, setting a breakpoint here should let you know exactly which BADIs are called.
    Hope this helps!
    Thanks,
    Rohini.

  • How to Implement Sort, Filter funtinality in Normal web dynpro ABAP Table

    Hello,
    How to Implement Sort, Filter funtinality in Normal web dynpro ABAP Table ?
    Thanks

    hi,
    Check out this link for sorting in Table.
    Sorting option in WebDynPro ABAP UI Table
    steps to follow :
    ->Have the data in internal table (itab).
    ->Now use sort command for the particular column which ever you want to sort.
      e.g sort itab descending by <Column>.
    ->Now you can bind the internal table with the Context Node which is binded to Table.
    I hope it helps.
    Thanx.

  • Web Dynpro ABAP Workflow Attachment Problem in UWL

    Hi,
    I am writing a custom application.
    A workflow is supposed to start by a Web Dynpro ABAP Application.
    The user can attach files to it.
    A superior is supposed to review the files and either approve or reject the request.
    I tried the following in Web Ddynpro ABAP: 
    CALL FUNCTION 'EWW_WORKFLOW_START'
        EXPORTING
          X_TASK                       = 'WS90000074'
        IMPORTING
          Y_WORKFLOW_ID       = lv_WF_ID
        TABLES
          X_CONTAINER               = lv_IT_CONTAINER
        EXCEPTIONS
    then followed  by:
    CALL FUNCTION 'SAP_WAPI_ATTACHMENT_ADD'
      EXPORTING
        WORKITEM_ID                 = lv_wf_id
        ATT_HEADER                   = lv_swr_att_header
        ATT_BIN                           = Item_FILENAMEATTACHED
        DOCUMENT_OWNER       = SY-UNAME
        LANGUAGE                     = SY-LANGU
    IMPORTING
        ATT_ID                              = lv_swr_att_id
    The Workflow has onlay one user decision step and one notification Step.
    In the user decision step, there is a binding from ATTACHOBJECTS to the task.
    But, in the log, you can see the attachment in the Workflow Container of the workflow instance, but you don't see it in the task (neither Inbox nor UWL)
    Anyone has a suggestion?

    You need to update all task items one by one with the attachment - you need to identify all tasks and attach it to each one

  • How to create value help in web-dynpro-abap

    Hi ,
         can anybody tell me detailed step for creating value help in web-dynpro-abap .

    Hi,
    Web Dynpro provides two types of pre-implemented search helps :
    1. ABAP Dictionary Search help
    2. OVS
    Input Help for WDA
    http://help.sap.com/saphelp_nw04s/helpdata/en/b3/4d3642eca5033be10000000a1550b0/frameset.htm
    There is  a blog on implementing OVS help in WDA. You can refer below link for sample code.
    /people/shruti.rathour/blog/2008/05/05/ovs-help-in-web-dynpro-abap
    In addition, you can also provide help through Drop Downs and Select options.
    Working with Select options in WDA
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c09fec07-0dab-2a10-dbbe-c9a26bdff03e
    Plz reward if helpful.
    Thanks.
    Raj.

  • How to call custom themes for Web Dynpro ABAP Application?

    Hi,
    I need to change the appearance of Web Dynpro ABAP application. So far I followed below steps,
    1.     Created theme folder u2018testngou2019 (SE80->MIME Repositoty -> SAP->PUBLIC->BC->UR->nw5->themes -> u2018testngou2019 ).
    2.     used program BSP_UPDATE_MIMEREPOS to dowmloaod content of  u2018sap_tradeshowu2019 (SE80->MIME Repositoty -> SAP->PUBLIC->BC->UR->nw5->themes -> sap_tradeshowu2019) to desktop.
    3.     Modified the themes using Eclipse Theme Editor.
    4.     used program BSP_UPDATE_MIMEREPOS to upload modified themes to MIME repository u2018testngou2019  (SE80->MIME Repositoty -> SAP->PUBLIC->BC->UR->nw5->themes ->  u2018testngou2019) .
    My current URL is like http://server.name:XXXX/sap/bc/webdynpro/sap/hrrcf_a_startpage_int_cand?sap-client=XXX.
    Now I want to know how custom themes called for Web Dynpro ABAP Application.
    Is my approach correct?
    ...Naddy

    Hi Naddy,
    What you used is one way and even I failed when tried that method,
    Instead go to SE38 - WD_THEMES - and you need to upload the zip file and you need to follow a folder structure.
    it is case sensitive, atleast the zip file.
    Make a zip file by name "Project.zip" -
    Create a Folder Project and have the below folder structure,
    1  data - all the properties files and also the designinfo file, below is the code
    2  themes - (to get all the files download the theme from portal and you will have all the folders)
       2.1  ur
         2.1.1 name of the theme
           2.1.1.1 common
           2.1.1.2 csf
           2.1.1.3  r
           2.1.1.4  ur - all the css files (would be good if you can get the files from the server.)
           2.1.1.5   WSRP
    3  war - empty folder
    *.designinfo
    isVisible=true
    version=7.0.14.1.0
    isDefault=false
    isSapDesign=false
    designName=**** name of the theme
    Once done create a zip file and click on Start Import and give the path and will ask for transport request, it will take a while to upload once done as mentioned in the use the parameter sap-ep-themeroot="path"
    This will resolve the issue.
    Cheers-
    Pramod
    reward points if helpful

Maybe you are looking for

  • FEP 2010 installation on Windows server 2012

    Hi all, Is there any step- by step guide to install FEP 2010 on windows server 2012 R2? We need to have this in place till the time, we get our FEP upgraded. Regards

  • Post goods issue at item level

    Hi All , is it possible to do the PGI at Item level ? as far as i  can think PGI is only possible for whole delivery ... We create the HU at the time of Delivery packing ( once all the TO are confirmed for 916) ... Now the requirement ispick the pall

  • (Solved) corebird won't start

    okay so i kind of did something i regret... i made the mistake of deleting my corebird .config files. so i thought it wouldn't be a big deal as i could always just yaourt -Rns corebird-git and then reinstall it. well it turns out it did put back the

  • TS2771 why my iPod touch is not turning on

    why is that my iPod touch does not turning on???

  • Problems with the jax-rpc testcase from the JWSDP tutorial

    Hello. I have e few problems with the hello case from the JWSDP tutorial. Everything works fine during the build/compile/installation phase but when I'm accessing the url http://localhost:8080/jaxrpc-hello/jaxrpc, the server wont find the service and