Step By Step Instructio​ns !!!! HELP NEW USER!

Step by step tutorial on how to create a project from A to Z. I am a new user, and i am tired of all the tutorials NI provides, they all talk about creating some bullshit waveform or making some easy calculator vi. They never talk about the real stuff, example, how to start a project, create your vi, compiling or putting together all the vi's, compile everything together and than creating an EXE. Holly shit that's all i am asking for is an idiots guide is it that hard for NI to make ! Can anyone out there direct to something to figure this out maybe a book, article, web page something!!!   And no thank you i don't need some sales guy calling me trying to sell NIN bullshit training classes, i have been to them and all the instructor could talk about is creating a ridicolous sine wave genarator (WoW) 

I am sure NI would be very happy to hear about any issues with the LabVIEW help that could be confusing to new users.
Here's a link to the LabVIEW help on organizing an managing projects:
http://zone.ni.com/reference/en-XX/help/371361D-01​/TOC16.htm
Have you read it and do you still have problems? What was not clear?
Genci wrote:
..., compile everything together and than creating an EXE.
How to built an application Step by step.: http://zone.ni.com/devzone/cda/tut/p/id/3303
You should also be aware that you cannot buit an application using LabVIEW base or full.
You need LabVIEW professional or you need to purchase the application builder.
Genci wrote:
...tired .. bullshit ... Holly shit ...idiots ...bullshit ..ridicolous ...
These are all non-techical terms and not very descriptive in the context of LabVIEW. Could you be a bit more specific on what kind of problems you encountered?
It would also be important to know your programming background? Are you experienced in any other programming environment? Is labVIEW your first attempt at programming? Are you familiar with general programming terms? Are you trying to program for personal enjoyment, for school, or as part of a job. If your employer forces you to switch to LabVIEW, maybe he could send you to some NI classes.
What is your LabVIEW version?
As anything, there is always an initial hurdle that needs to be overcome before becoming familiar in a new environment. Fortunately, this threshold is very low in the case of LabVIEW and you should be up and running after a couple of hours. Mastery takes a bit longer, of course.
Your best bet is to ask a more specific question here in the forum whenever you get stuck. Good luck and enjoy the ride.
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • Oracle Help (New user)

    Hi, im a new user to oracle express edition and have been given a task at university to complete.
    Iv tried searching for tutorials myself but i either A cannot find the ones i need, or B dont understand them,
    my task is:
    A soft drinks company based in Cramlington require an individual to undertake a data analysis project. The company would like you to produce a prototype of the system, designed as an oracle database system.
    The company would like to record sales data. The sales can be through vending machines or shop outlets; as a guide, the prototype needs to record where the items have been sold (vending or shop), details about the items as the company produces a range of soft drinks, prices etc. The region the items are sold in is important as the company would like to produce reports by region to compare sales figures. The new system will be used to make management decisions, such as where to increase marketing, whether items should be withdrawn from the market etc. Sales reports should be based on monthly figures.
    Tasks
    The database, SQL, forms, reports and all other applications you build for the system should be created in Oracle Express Edition, and submitted on CD-ROM.
    The username and password for the DBA in your system should be as used in the lab, as follows:
    Username: hecomputing
    Password: ramdrive
    1.     You are to create the tables in Oracle Express Edition and populate the tables with sample sales data. Take into consideration the requirements detailed above. However remember this is a guide and by no means a full list of data that should be recorded by the system. It is expected that you will produce a third normal form structure and submit this with your application.
    2.     Create all forms for data entry. No data should be entered through the table view by the user; the data should be entered via a form.
    3.     Create all forms to view, edit and delete data.
    4.     Create a drill-down form for item and sales data as a minimum.
    5.     Implement triggers to demonstrate auditing, which as a minimum should track
    •     Insertion of new data
    •     Deletion of existing data
    •     Modification of existing data
    6.     Implement stored procedures
    7.     Provide the user with a customised, informative message if an error is encountered, by implementing Handling Exceptions.
    8.     Create queries for data manipulation. All queries should be stored as SQL.
    9.     Create reports for sales analysis, based on monthly figures. As a minimum you must create a report for sales per item on a monthly basis, sales per month via each sales type (shop, vending machine) which should also be grouped by region.
    10.     Create two users that are not database administrators; user1 password1, user2 password2. Demonstrate user administration, roles, privileges, security and auditing.
    11.     You are to informally demonstrate your prototype on the 20th May 2007, in the timeslot you have been allocated. Please see your tutor or Blackboard to confirm your timeslot. All demonstrations will take place between 12:00pm and 5pm on that day.
    Can anyone please steer me towards a good set of tutorials that can help me complete the above task.
    thanks

    Hi,
    You can download and study the 'Store' application at http://www.oracle.com/technology/products/database/application_express/packaged_apps/packaged_apps.html#STORE which does many of the things you need. If you 'hack' the app you'll be well on your way.
    Keep Smiling,
    Bob R

  • HELP New user, importing Music from library ( WMA )

    I am a new user to Itunes ( bit late i know ).
    I need to move my music ( my music folder ) into itunes.
    I have over 40Gb of music. If i import music folder through Itunes using the file > Import folder menu, i am lead to belive that firstly all my music will need to be converted to Mp3. this is not a problem althouigh i am sure it will take a long time.
    My main worry is that when converting the music into itunes the origional my music folder will stay where it is therefore doubling up my music to over 80Gb and therefore will not fit on my hard drives.
    i tried to cut and paste my music files into the itunes music folder within my music although it doesnt appear in my library???
    Any help appreciated!!!!
    Many thanks.
    Dell PC   Windows XP  

    Moving files into the iTunes library doesn't comvert them to MP3.
    iTunes can only use unprotected WMA files. If you are trying to add protected WMA songs, they won't go into the iTunes library.
    You can leave all the music files where they are. iTunes will only copy them to the iTunes folder if you have that option checked.
    Here are some articles that may help
    http://www.apple.com/support/ipod101/tunes/
    Move iTunes Music Folder
    Convert Songs To A Different Format

  • Need wifi help new user-be nice!

    -new user-how do i obtain password for wifi? trying to enter through guest networ, but don't know password.

    - You will have to contact the person who setup/administers the network/router.  Sometime the default passwords- is written on a sticker attached to the router.
    - Yu can also go to the router and look for the manufacturer and mdel number and then go to the manufactuer's website and downlot the manual for the router.  It will like the default password and how to reset the password.

  • Need publishing error help - new user.

    I am new to the mac world having just purchased a MacBook, signed up with a mac account, and am trying to test load a very simple 2 page web site. I continue to get publishing errors (different file names sometimes appear when I retry to publish). Nothing shows up on my idisk, so nothing is getting through. I have tried to publish about a dozen times over the last couple of days. I note others have had similar errors. Since space is not an issue on my idisk and the site is so small, I'm not sure what to try next. Any ideas? Thanks.<

    Dr. B.. this fixed about 90% of the publishing errors for me.
    Hope this helps...
    Jim
    “iDisk Quota Error” fix
    A. Quit iWeb, if it is open. Select Go to Folder from the Finder's Go menu.
    Then type (or copy and paste) ~/Library/Application Support/iWeb into
    the field and click Go. You should now see a file named, Domain.
    (or you could just do it manually by opening the hard disk, open the Users folder, then open the Folder with your user name on it, open the Library folder, open the application support folder, open the iweb folder, and then you should be looking at the DOMAIN file.)
    This is a Mac OSX package file. Note: A package is a relatively common type of document in Mac OSX; it is essentially a sealed folder. It contains individual items, but cannot be opened in the same manner as a folder.
    B. To open the package, hold the Control Key and click on the Domain package file. Note: If you have a two-button mouse, this step can be accomplished by right-clicking the Domain package file.
    C. Select Show Package Contents from the contextual menu that appears.
    D. A new window will appear containing a folder named Contents.
    E. Open the Contents folder. Here you will see one, and possibly two files named assets.<membername>.groups.<groupname>.plist or assets.<membername>.plist, where <membername> and <groupname> correspond to your .Mac member name and .Mac Group name. Note: Your .Mac member name is the first part of your .Mac email address, before "@mac.com."
    NOTE FROM ME... I didn’t find these files in the Contents folder, I found
    them when I opened the Domain File itself. Whatever.. when you find one,
    or maybe both of these files, delete them. (some people have both, some
    have one)
    F. If you have either or both of these files, move them to the trash. Then close
    the Contents window.
    G. Relaunch iWeb and try publishing again.

  • "Something" more to help new users?

    Is there anything you would like Arch to do for less linux competent users? To have "something" more to help them setup their system, without Arch compromising it's stand?.... will not be added in base install of Arch (except if does improve and approved by devs) nor tools making users miss the learning (computer illiterate).
    PS.
    For tools, keep this in mind:
    Don't let configure tools / GUIs control the system but be controlled by the user. There is nothing wrong of having GUIs as long as it follows this principle.

    From the route I took to first installing Arch made for a pretty easy install. I don't think that that really is needed ... well unless the user did not copy down the installing instructions before installing.
    Having the installation instructions on the CD would not be a bad idea but what user will know how to access them without some sort of prompt and remembering how brutal back stepping was in the installation process I don't know if it would even work.
    The best thing is to make the install instructions and other manual crap to be as clear as possible.
    I just don't know because other than some initial getting used to thing back in 0.3 days arch was pretty easy to use right from install through to when I stopped using it.
    I suppose one thing that could make things easier is for packagers to be very sure that they have functioning packages and not semi working or broken ones. Having as many feature enabled without adding bloat to the package usually is a good thing too.

  • Need Automator Help - New User

    I was just wondering if it is possible to have the program visit webpages automatically.
    Example
    program opens www.1.com
    automatically goes to www.2.com
    www.3.com
    and on indefinitely
    If anyone knows if this can be done or if they can put my in the right direction for a way to actually do this is much appreciated.

    What exactly are you trying to do? Bookmarks can be opened in tabs, a list of web pages can be opened, etc. If you are wanting to do something like get a bunch of links from a web page somewhere and then just touch the linked pages, an AppleScript action can be written to step through each item in the list (wherever you are getting the links from) and set the URL of the front document, otherwise you will wind up with a whole bunch of windows or tabs. There may also be page load timing issues if you are wanting to open them one at a time, so it would help to have some clarification.

  • HELP NEW USER HERE

    Please help...I was able to put my music on my ipod video but I can not get the movies that I have in my itunes file onto my ipod. They show in itunes under library and not video. I bought quick time 7 pro and followed the directions to export to ipod it took a full 24 hour day to export and when it was done I have no idea where the new file is or what to do with it. I am sooooo confused and just need help on how I get movies on my ipod? Can someone help me out there. Donna
    PS: All I want for Christmas is to be able to watch movies on my ipod ....

    Videora iPod Convertor.
    To use Videora iPod Convertor to convert movies for use on your iPod, consult these helpful links:
    To get started: Videora iPod Convertor Guide
    If you have questions: Videora iPod Convertor Frequently Asked Questions
    If you have more questions, post them here: Videora iPod Convertor Forum
    Note that Videora iPod Convertor is a 3rd party program. If you need help with it, post your question there.
    It's not very wise to admit you are participating in illegal activity (downloading movies from limewire).

  • ITunes preferences won't save. Please help new user.

    If anyone can help me with this I'd be so grateful. I've looked through the other advice I can find on this forum, and on other sites, and have tried the solutions I've found suggested, but nothing's worked so far.
    I've tried deleting the preferences files and rebuilding them several times. I've tried reinstalling iTunes several times, too. I've also tried launching iTunes from a different user account, created for the purpose. But I can't get my preferences to save. If I can't set iTunes up the way I'd like it, this could reverse my decision to buy an iPod. I'm not great with computers, and it's driving me to distraction. Any and all advice v gratefully received !

    Thanks for the reply!!!
    The instructions I used were off this Apple Support site...
    http://support.apple.com/kb/HT1751
    I get both options to choose as well as create. I used choose when I did mine and it worked.
    I did copy her entire itunes library.
    This is exactly what is in the folder that I copied...
    (folders)
    Automatically add to itunes
    Downloads
    Mobile Applications
    Movies
    Music
    Ringtones
    Voice Memos
    (XML Document)
    Library
    I do not see a .itl file anywhere.
    I just looked on my file I copied that worked on my user name and I have (3) Itunes Database Files on it.
    Thanks so much for the help!!!

  • Help NEW USER!!! Can't uninstalling iTunes 7 and Ouicktime b/c of  Errors

    When ever I try to uninstall iTunes the Error Message: A later version of iTunes is already on this Machine. Installation cannot continue. appears and For Quicktime the installation wizard doesn't even appear. I cant open iTunes or Quicktime through shortcuts either and the Error message for shortcuts comes up: This action is only valid for products that are currently installed. but I can open iTunes through a music file and it plays the music fine, Cant uninstall it from safe mode either. PLEASE any help will be greatly appreciated, as I cant use my new ipod to connect to iTunes because the computer wont even recognize iTunes,
    Thank You
    Compac Presario 933 MHz Ram 40Gb harddrive Windows XP Pro iTunes 7 and OuickTime

    Try using the Windows Install Clean Up Utility to remove all those files and we can go from there. Here:
    http://support.microsoft.com/kb/290301/
    Rachyl

  • Help-new user-how do i show my new form

    Hi everyone
    i just created my first form,with data base of axccess linked
    to it.
    I created it by using asp.net.c files,in DW,i noticed that
    the file that created is an aspx file,and when i try to
    preview him in browser i get these message
    "Server Application Unavailable
    The web application you are attempting to access on this web
    server is currently unavailable. Please hit the "Refresh" button in
    your web browser to retry your request. "
    am i suppose to do something with these aspx files before i
    preview it ,link it somewhere or something.cant understand what the
    problem.i did exactly wha was told in the help of DW.
    please help
    thank you

    Do you have the Dot Net Framework installed on your computer?
    Check in
    Control Panel/Administrative Tools and see if the Microsoft
    .Net Framework
    shortcut is in there.
    Nancy Gill
    Adobe Community Expert
    BLOG:
    http://www.dmxwishes.com/blog.asp
    Author: Dreamweaver 8 e-book for the DMX Zone
    Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
    2003)
    Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
    A Beginner's
    Guide, Mastering Macromedia Contribute
    Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
    Web Development
    "Traveller25" <[email protected]> wrote in
    message
    news:e2grbn$4uu$[email protected]..
    > Hi everyone
    > i just created my first form,with data base of axccess
    linked to it.
    > I created it by using asp.net.c files,in DW,i noticed
    that the file that
    > created is an aspx file,and when i try to
    > preview him in browser i get these message
    >
    >
    > "Server Application Unavailable
    > The web application you are attempting to access on this
    web server is
    > currently unavailable. Please hit the "Refresh" button
    in your web
    > browser to
    > retry your request. "
    >
    > am i suppose to do something with these aspx files
    before i preview it
    > ,link
    > it somewhere or something.cant understand what the
    problem.i did exactly
    > wha
    > was told in the help of DW.
    > please help
    > thank you
    >
    >

  • Help new user girls !

    Hi,
    First sorry for my english.
    I'm new in Jdeveloper. I had to link libraries to a project, so I have tried to see the project properties. But when I try to go to "libraries", I have the message "The specified package directory structure cannot be created. The path may be too long or may not be accessible".
    But when my collegues try to do the same action, it works. We have search what can be different within PCs, but, we can't find.
    Does someone can help ?
    Thanks

    Hi,
    is the library on a local filesystem?
    Frank

  • From Mac Pro to Macbook and back, round-trip help (new user)

    I've searched a bit, but honestly I'm not sure yet what I'm searching for exactly so please excuse this post if it's been explained previously.
    Picked up Aperture a few days ago, reading, learning the tutorials, loving it... I wanted to make sure I'm doing this right from the get-go.
    I made a new project with an album and book inside. I've been editing the images and now need to travel with them so I can show my father how his shots are coming along... and also proudly show off what Aperture can do! I need to figure out the best way to transfer these images over to my Macbook, work on them on the road, then when I come back overwrite or sync back to my Mac Pro. (There's no need to continually keep them synced).
    Someone willing to point me in the right direction?
    Thanks!

    If it's just a single Project, the easiest is to:
    1. Export the Project from your Mac pro.
    2. Import the project into Aperture on your MBP.
    3. Do all your on-the-road stuff.
    4. When you come back, export the Project from the MBP and copy to the Mac pro.
    5. Import the project on the Mac pro and delete the 'old' copy of the Project from within Aperture.
    Ian

  • Audiobooks - Need big help new user

    I bought audiobooks on itunes and I see it in my playlist on my computer but it will not download onto my nano. What's up with that? Any help is appreciated.

    - You will have to contact the person who setup/administers the network/router.  Sometime the default passwords- is written on a sticker attached to the router.
    - Yu can also go to the router and look for the manufacturer and mdel number and then go to the manufactuer's website and downlot the manual for the router.  It will like the default password and how to reset the password.

  • Please help-new user

    I've got itunes and my new ipod mini up just fine and my computer (windows based) recognizes the ipod mini & says it's updating it, however when it shows on the itunes screen, all of the songs are grayed out and none are showing on my ipod mini at all. Does anyone have any ideas what I can do to fix this? Thanks so much!

    Princess,
    If you've selected the iPod in the source listing in iTunes, the songs will be greyed out because you have automatic transfer selected for your iPod. That's normal.
    So, you're saying when you disconnect the iPod and look in the main menu, there are no songs there?
    Then look at this.
    Strange iPod behavior

Maybe you are looking for