STep by Step ISDN E1 Link Configuration

Dears
i need a STep by Step ISDN E1 Link Configuration
i have no knoledge about it and i really wanna learn it before the CCIE Lab
Regarsd

You can find it here
https://supportforums.cisco.com/document/125801/basic-isdn-pri-e1-configuration

Similar Messages

Archive link Configuration Step by step guide

Hi
Can anyone share their SAP Archive link configuration guide.. step by step guide. I can post a resume thru web, but not sure where this is going? I cannot see the resume in PB60 as an attachment. Later I found that there is some configuration needed in Archive link. I am new to this area and I have to do this one for recruitment project. Any help would be highly appreciated.
I know bits and pieces, but donot have wholistic approach. I think this config guide really helps.
Thanks
Pandiri

Hello,
SAP Archivelink documentation can be found at:
https://service.sap.com/archivelink
Then, go to Media Library -> Documentation
Archivelink documentation for release 4.6c - 6.20 is available.
Hope this helps.
Regards,
Karin Tillotson

Boundaries configuration in SCCM 2012. Step-by-Step doc, link

Hello MS team,
I have a client that currently has one boundary configured in their SCCM 2007 environment that uses the Default_First-Site-Name.
This client needs to reconfigure this in SCCM 2007 as there should not be any overlapping Boundaries in SCCM 2007 and 2012.
Once all of the required boundaries are configured in the company and there are no overlapping boundaries in SCCM 2012 environment, they can then enable client
push to take advantage of this automated deployment method.
Can you please provide me with the steps for configure boundaries in SCCM and AD?
AD only has the default_First-Site-Name, therefore no multiple sites
Please, indicate step by step all the work and tasks required to be executed in AD and SCCM 2012
Franki

Boundaries are not conidered to be overlapping if they are in two seperate hierarchies.
Automatic lcient push won't work if the 2007 client is already installed.
You don't have to set anything up in AD. Just use ip ranges.
John Marcum | Microsoft MVP - Enterprise Client Management
My blog: System Center Admin | Twitter:
@SCCM_Marcum | Linkedin:
John Marcum

How To Configure Or Intialize Portal Installed With BI7.0 - Step By Step

Hello Gurus
How do I configure or start working on portals which is installed as part of BI 7.0 installation that is EP and EP Core(Includes BI-JAVA and ABAP Stacks).
Please help me out with possible guidance(if possible Step by Step procedure) how to set up the parameters and at which locations in BI.. I have kept couple of days exploring this site, but I couldnt fine one answer relating.
More over the answers I could find was "To configure technical content, business content and bi admin cockpit," Any help or suggestion provided is grealy appreciated and points will be awarded accrodingly.
Thanking you all gurus in advance,
Regards,
Parvez.

Dear,
Try these links:
http://help.sap.com/bp_epv170/EP_US/BBLibrary/Documentation/N00_BB_Essential_Information_EN_US.doc
http://help.sap.com/saphelp_nw04/helpdata/en/7f/5bfc3f8fc2c542e10000000a1550b0/content.htm
https://websmp102.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TEP12&COLLECTION=43&LANGUAGE=EN
http://sapport.blogspot.com/2008/03/business-intelligence-java-components.html
/people/srinivas.gv/blog/2005/11/28/role-and-configuration-of-isolation-methods-in-sap-enterprise-portal
/people/julia.kielbasiewicz/blog/2005/04/17/integration-of-sap-business-warehouse-and-enterprise-portal-150-single-sign-on
http://help.sap.com/saphelp_nw04/helpdata/en/0f/163c405865e801e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/98e6418b7eca17e10000000a155106/frameset.htm
/thread/189547 [original link is broken]
note: You can as well search in this forum.Im sure there are lots!
Thanks.

Workflow step by step configuration for scheduling level agreement release

Hi All,
        I tried alot to configure step by step scheduling level agreement release using workflow.
        But, The release code I couln't pass using workflow.
        Plz guide me, or let me know some useful links for the same.

/Use the user exit M06E0005 to avoid all this problems.
In this user exit you can add your custopm logic based on your org structure and then workflow will take to all of release one by one.

Kindly explain the step by step procedure for configuring sales order stock

Hi friends,
can anybody explain the step by step procedure for configuring sales order stock.
Stock that is used for a sales order. It is directly allocated to a sales order. Components can only be used to produce material ordered by the customer and the finished product can only be delivered to the customer via the sales order.
You can manage valuated or non-valuated sales order stock.
If the sales order stock is not valuated, it is managed via a cost collector. The system does not carry out invoice verification postings for goods movements, and you cannot obtain an overview of how the stock is valuated until the end of the settlement period in Controlling.
If the sales order stock is valuated, you have immediate access to its value in Financial Accounting. The assigned accounts are debited and credited as a result of the valuated goods movements.
but i am not clear of how to map it into sap.kindly explain it step by step.
regards,
willaims

Follow the link
this will explain about complete config
http://help.sap.com/bp_bblibrary/600/Documentation/V4J_BB_ConfigGuide_EN_US.doc

Link to learn step by step Oracle 9i AS portal version 902

Dear All,
due to limited budget on memory, I want to study Oracle 9i AS Portal version 9.02.
Does anybody know the link to learn how to develop portal on oracle 9.02 step by step?
help me plz....
Regards
Erie

1)Portal is an integrated component of 9iAS. You need to download all of 9iAS and select the minimal install option.
2)We haven't tested this configuration, but as long as you set up apache appropriately to use different ports than the existing software it should work.
3)Portal requires 8.1.6.2 Enterprise edition or 8.1.7 Standard edition. Personal Edition will not work.

Extractor configuration step by step

I all,
where can I find a step by step guide about the BI extractor configuration to transfer data from SAP HR to SAP BI?
Thanks

hi,
refet to this link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/77eb3cad744026e10000000a11405a/frameset.htm
hope it helps,
regards,
Parth.

Step by step configuration of ESS MSS

Hi All,
I want to know if there is any documentation showing the ESS MSS step by step configuration based in the portal content delivered by SAP?
Thanks for your help

Hello
Link: [http://help.sap.com/erp2005_ehp_04/helpdata/EN/c4/4f5a41a8f17743b15e15ebdeaa0c5d/frameset.htm]
this may help you a lot...

Step by step configuration of IR and ID

Can anybody explain step by step configuration of IR and ID File to File Scenario with BPM ?

Refer these links
Introduction to simple File-XI-File scenario and complete walk through for starters-Part I & part2
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
File Receiver with Content Conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34

STEP BY STEP Configuration require for setup SLD Connections

hi I have installed the sneak preview 7.0 netweaver.
I would like to set up the SLD connection for R/3 system.
kindly provide the step by step configurations requied to set upd the SLd connection to R/3 server
Regards
Vijay

Hi,
Refer to this document - [SLD Configuration guide for SAP NW7.0|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50924080-0627-2a10-2b89-8cb87b972fb1]
For more info on SLD refer to this link - [SLD|System Landscape Directory (SLD)]
Regards
Srikanth KV

Workflow configuration step by step guide...

Hi All
Please any one could send me the workflow configuration step by step guide. can send it to my e-mail address : [eMail Address Removed: violation of SCN's Rules of Engagement]
Many thanks in advance.
Arshad
Message was edited by: Jason Lax

Hi Arshad
Suggest you to go through the documentation before actually doing it at least once.
Pl check this link:
https://websmp208.sap-ag.de/ibc-srm
You will find scenario specific config guides for EBP40. Download the config guide for self-service procurement and gothrough workflow configuration section. This is still the same in SRM50 also.
Best regards
Ramki

Urgent: Step by step configuration guide for workflow

Hi all,
Can anybody please proVide me complete step by step configuration guide for SRM 5.0 workflow.FULL POINTS WILL BE AWARDED FOR THE HELPFUL ANSWER..

hi,
<b>Check the below PDF file on Workflow:</b>
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
There is a good book from SAP Press that I would
recommend as a starting point.It's called Practical Workflow for SAP and it is by Alan Rickayzen.
http://www.sap-press.com/product.cfm?account=&product=H950
/people/ginger.gatling/blog/2005/12/01/link-workflow-business-objects-to-your-collaboration-tasks
http://help.sap.com/saphelp_erp2005/helpdata/en/fb/135962457311d189440000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
http://help.sap.com/saphelp_bw33/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
http://help.sap.com/saphelp_bw31/helpdata/en/8d/25f94b454311d189430000e829fbbd/content.htm
Go through the following:
1) Goto Tcode PFTC : Standard Task > Create Button>Workflow Templete
For Create Container
Element : ZBUS1001006
Name : ANy Name
Description
Data Type & Properties
Data Type:
select Object Type : BOR Object Type for BUS1001006
Properties:
Parameter Settingd : check all Import, Export & Mandatory Checkboxes
Basic Data :
Abbr : Create_View
Name : Some Name
Work Item Text : Create View Material & -
Click on DELE Button & Select Material From The List
Object Catagory : BOR Object Type
Object Type : BUS1001006
Method : View
Triggering Events
Obj Catagory Object Type Event
BOR Object BUS1001006 View
activate it
Enter on BUS1001006 Object Type you will get Quadratel<> Button after that
double click on Quadratel<> button you get green button
after that the system will generate the task No.
check in the Event linkage Tcode : SWETYPV
if you find an entry with your Workflow and linkage active
goto Tcode : SWEC click on New Entries
Change Doc Obje Obj Cat Obj Type Event on create
Material BOJ Obje BUS1001006 View Option Button(Checked)
save this
goto Tcode : SWEC
Change Doc Object : Material
Obj Catagoty : BOR Type
Obj Type : BUS1001006
Event : View
Check with On Create Button
Goto SWETYPV
Obj Catagoty : BOR Type
Obj Type : BUS1001006
Event : View
Receiver Type : Some Work Flow No: WS80000431 like this
Click on Work flow Builder
Cheers
Alfred

Electronic bank mt940 step by step configuration document

hi all,
can any body send me a step by step electronic bank mt940 configuration document.
Its little bit important we are implementing mt940 format.
regards,
sudhakar

Hello, Hope the following information is helpful. There are different programs to upload electronic bank statement. FF.5 or FF_5. I think your case Multicash format you are using. You need have three files in FF.5 and two files in FF_5 You can prepare a Z program in order to truncate the electronic bank statement into two or three part files and save them on the application server. 1. Take all the external codes list from bank. 2. Take any available documentation from the Bank describing the relevance of the external codes. 3. Make sure that your Chart of Accounts (Bank Accounts) last digits logic is appropriate to meet the requirements. 4. Based on this decide the Account Symbols that are required to be created. 5. Make sure that the masking rules are configured properly. 6. Decide the posting rules that needs to be created. 7. Link up your external symbols provided by the bank with Posting rules and give proper algorithms for posting and clearing logic. 6. Concentrate on the posting areas to be posted while uploading the bank statement. Further explanation would help you to understand the functionality when uploaded the electronic bank statement. Main purpose of uploading the bank statement into SAP is to make your Bank Main Account and physical bank statement balance in sync. You do not have any traditional Bank Reconciliation Statement (BRS) report in SAP. SAP is normally you maintain bank main account and bank sub account. Whenever you make a payment through F-53 or F-58 or F110, the entry would be: Vendor Account Dr To Bank Sub Account The ending digits of the sub-account would be important in configuring the masking rule. Based on this masking rule when you upload the bank statement the entry the system would pass is: Bank Sub Account Dr To Bank Main Account It depends on the configuration, either the sub account will be cleared by the system automatically or you need to run F.13 to clear the sub accounts. At the time of receipts, you have different accounting entries unlike payments. It needs to post to two posting areas. 1. GL Accounting 2. Sub-Ledger Accounting The entries would system itself pass is: Bank Main Account Dr To Bank Sub Account Bank Sub Account Dr To Cutomer account. Clearing logic mentioned for your posting rules and the alogrithm used for your external bank symbols will also play pivotal role in clearing the accounts. Ideally you will use FF67 / FF.5 / FF_5 for uploading manual or electronic bank statement FEBA / FEBA_BANK_STATEMENT is used for furthe rprocessing. GO THROUGH SAP NOTE 48854 Please go through SAP Note. 48854. You will get an idea regarding the functionality of the algorithms. Though this note is in relevant to GB specific, you will find this very useful. description follows below regarding the normal procedure for maintaining table T028G. Due to the different bank codes and posting rules, pre-Customizing is not possible at this point. The following processing types are available - unless stated otherwise, you should use the interpretation algorithm: '000 - No interpretation' in each case. 1. '00': There is no processing. The entry line is ignored. 2. '01': A validation is made whether an entry exists for the transferred check number in the check table (PAYR). The check number and payment document number are transferred for further processing. Interpretation algorithm: outgoing check processing '011'-'013'; the update in the check file is via the interpretation algorithm. 3. '02': Transfer of the ending balance to the electronic bank statement 4. '03': Transfer of the opening balance to the electronic bank statement 5. '04': Clearing via the allocation number which is delivered with the bank statement. No interpretation algorithm. 6. '05': Clearing of BACS payments or BACS bank collection. The reference text field is first read to ascertain whether it involves payments initiated by users or bank collection via BACS. Providing it does involve a cash transaction initiated by the user, the payment document numbers concerned are determined via the reference number and transferred as a reference to further processing. Interpretation algorithm: '000 - No interpretation' or '019 - Reference number DME'. Note To differentiate between the two procedures in table T028G, you have to maintain two separate entries. Example: the bank uses bank code '62' for cash receipts and for BACS bank collection. Ext. Transaction +/- sign Posting rule Int. Algorithm Processing type 62 + GB62 001 5 62 SAPBACS + GB63 000 5 7. '06': Bank costs or interest revenues Recommended interpretation algorithm: '000 - No interpretation' 8. '07': Total amount of cash disbursements 9. '08': Total amount of cash receipts 10. '09': Items not paid Recommended interpretation algorithm: '000 - No interpretation' Regards, Ravi

COPA Step by Step Configuration document

Hi all,
Cany anyone send me COPA Step by Step Configuration document .
What are all the pre-implentation settings to be done for COPA before implementing it in BI.
I searched in forums..But couldn't find it.
Please give me a link where I can download it as soon as possible.
Thanks,
Harika.

check this pdf document.
[http://sap.seo-gym.com/copa.pdf]
--- Thanks...

STep by Step ISDN E1 Link Configuration

Similar Messages

Maybe you are looking for