Step by Step Migration from Lync Server 2010 to Lync Server 2013

Hi All,
I just finished migration from Lync Server 2010 to Lync Server 2013 (for enterprise servers) in my lab environment. After that I started to write article series that contains five parts. You can see below first three parts and I think , I will upload
rest of parts until this weekend.
Part 1 - http://www.oiboran.com/?p=1073
Part 2 - http://www.oiboran.com/?p=1109
Part 3 - http://www.oiboran.com/?p=1140
Hope to be useful,
Regards
Part 4 http://www.oiboran.com/?p=1171
Part 5 http://www.oiboran.com/?p=1219 (added on 20.12.2012)

It's working for me now, so maybe it's back up.
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer" | Blog
www.lynced.com.au | Twitter
@imlynced

Similar Messages

Need step by step instructions on migrating from MCS to Business Edition 6000

My plans are the following:
1. Acquired spare mcs 7825 server
2. Perform DRS restore from an up to date mcs cluster
3. Upgrade the 7825 to 8.x
4. Perform a DRS Backup
5. Restore the DRS back up onto the new pub?
*Step by step on getting the 6k built so that I can do step 5

If you migrating from MCS to UCS this link might be useful
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/virtual/CUCM_BK_CF3D71B4_00_cucm_virtual_servers.html
DRS for 8.6
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/drs/8_6_1/drsag861.html
if you have an HP 7825 you will need a 16GB USB drive in order to upgrade
These release notes are based on following software versions:
•Unified CM: 8.6.1.10000-43
Pre-Upgrade Tasks
•If you are upgrading software on HP7825H3 or HP7828H3 hardware, ensure that you have a 16GB USB device available to migrate your data to the new system. For Unity Connection and Business Edition 5000, a 128GB external USB device is required.

Migration from Exchange server 2010 to Exchange server 2013

Hi All,
We have migrate Exchange Server 2010 to Exchange Server 2013. When I turned off my Exchange Server 2010, Outlook is not able to connect through Exchange 2013. It's prompting for user name and password again and again and nothing would happen
after provide user name and password. So, we are not able to uninstall exchange 2010 from old server.

Run these commands and post the update.
Get-WebservicesVirtualDirectory -Server E2K13SERVER |Fl internalURL,ExternalURL
Get-OWAVirtualDirectory -Server E2K13SERVER | Fl internalUrl,ExternalURL
Get-ClientAccessServer E2K13SERVER | Fl AutodiscoverServiceInternalUri
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Calendar Server Migration from iplanet5.2 to Sunjava messaging server

Hi
Can any one help me on Calendar server migration.
How can i migrate the calendar server from iplanet 5.2 to sunjava messaging server
Users
Calendar resources
Groups
Attributes

Hi,
I assume you mean iplanet calendar server 5.1.1 to the latest calendar server (6.3). If so, I suggest you start by reading through the calendar server admin guide which goes through the steps involved and tools to use to migrate from 5.1.1 onto calendar server 6.3.
http://www.sun.com/bigadmin/hubs/comms/library/manuals.calendar.jsp
Regards,
Shane.

Lync Server 2010 Mobility. Server does not call mobile.

Hello all.
We have an infrastructure with Lync Server 2010 SE, Edge Server, ISA.
Everything works fine, Enterprise Voice is enabled and integrated with IP PBX.
Lync 2010 desktop client can call to PSTN without any problem.
But when user logs in to mobile client, iPhone Lync Mobility client for example, server tries to call to users' number but an error occurs, that user is not online, IM works just fine.
The reason is - call goes to trunk in the following format 98XXXXXXX with normalization rules, server tries to call in e.164 format +7XXXXXXXXXX.
Everybody knows how to normalize server calls?

Open Lync Server Control Panel, click Voice Routing and then click Test Voice Routing, enter the dialed number to test with the Dial Plan and Voice Policy assigned to the caller.
Lisa Zheng
TechNet Community Support

How to Make exchange server 2010 an IMAP server

hi
how do I Make exchange server 2010 an IMAP server?
Any step by step guide?
tnx

Hi,
To configure IMAP for Exchange 2010, you can refer to the above suggestions and try the articles.
Moreover, here is reference about how to configure Exchange account with IMAP mode:
http://support.sherweb.com/Faqs/Show/how-to-configure-a-imap-account-in-outlook-2010-exchange-2010
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Outlook 2010 Exchange Server 2010 to Exchange Server 2013 Features

Hi All
We have recently upgraded from Exchange Server 2003 to Exchange Server 2010. We are using the Outlook 2010 (32 bit) email client. When mailboxes were moved on to the new server various features inside the system were activated. For email Internal Out of
Office Messages, External Out of Office Messages, notifications in the email recipient bar when creating emails if the user was out of office.
What new features would be available with Outlook 2010 (32 bit) and Exchange 2013. And are they dependent on the Office Service Pack?
Kind Regards
Please note that I have previously posted this in another forum but was advised to post here in this forum.

Hi,
I find your post on Office forum:
http://social.technet.microsoft.com/Forums/en-US/fc538968-212c-411c-8ce8-0ef1d7acfcca/outlook-2010-exchange-server-2010-to-exchange-server-2013-features?forum=outlook
The Steve's answer is comprehensive, great links on Exchange 2013 new features and removed features.
About "And are they dependent on the Office Service Pack?", I will give the answer.
Based on my knowledge, when new SP releases, it include enhancements in security and compliance, architecture and administration, and user experiences.
For example, Exchange 2013 SP1, it connects to Outlook 2013 SP1 via MAPI over HTTP.
If you want to know more about the Exchange new features, please see Exchange Team Blog.
Find blog about SP1 for your reference:
http://blogs.technet.com/b/exchange/archive/2014/02/25/exchange-server-2013-service-pack-1-available.aspx
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Project Server Migration from 2007 to 2010

Hi Team,
I am migrating project server 2007 and wss 3.0 to sharePoint 2010 and project server 2010. I am using full database attach upgrade method. The provisioning process end up with failure and uls logs showing the below mentioned errors.
ULS Logs can be found at the below mentioned link
https://onedrive.live.com/redir?resid=AC01B07FAACAFC5!534&authkey=!AM1v2WSkbUQx-t8&ithint=file%2ctxt
I am looking for help, and i really appreciate if some one can help me sorting this out.
Regards
Kashif
Kashif Saeed

um...
> Upgrade session finished successfully! 0 errors and 0 warnings encountered.
not sure what you're asking
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Migration from 2007 to 2010 - AD issue

Hi,
I'm currently migrating from EPM 2007 - EPM 2010 with a great handicap,
the source AD "source-ad.com" its not the same at destination "destination-ad.com"
Can I commit the migration, changing the "source-ad\user01" account resources, to "destination-ad\user01"?
I assume that the account name are the same between "source-ad" and "destination-ad.com"
Thanks in advance,

Hi
Below article has the steps to migrate the project server from one domain to another.
http://blogs.msdn.com/b/brismith/archive/2009/06/22/project-server-2007-migration-from-one-domain-to-another.asPx
If you are looking to Migrate the Project server between domains and also migration of project server from 2007 to 2010, then it is best to migrate the Project server from one domain to another domain first and then migrate it from 2007 to 2010.

Migrating from Azure SQL Database to SQL Server VM

I'm looking for steps/documentation to migrate a database from Azure SQL Database to SQL Server VM in the cloud. I want to make an app whose data is initially hosted in the former. Due to a few reasons, I might have to migrate to SQL Server VM. I'd
like to design the app such that ideally there is no downtime. Looking for guidance...

You can create bacpac file from Azure SQL database and Restore this bacpac file into SQL Server VM or any other place.
Please refer below URL for more details:
http://blogs.msdn.com/b/mast/archive/2013/03/04/different-ways-to-backup-your-windows-azure-sql-database.aspx
dharampal sikhwal

POST MIGRATION - Project Site cannot be found after migration from 2007 to 2010

Hi,
I have done full migration from Project Server 2007 to Project server 2010. All the databases have been restored. The details in the Project Center are coming correctly. But When I open the Project Site , I get error webpage cannot be
found.
I have done the Bulk update but it is not updating the URL to 2010 URL.
Please help.
Regards

Use PowerShell to list all the sites in your PWA site collection.
There are many examples online.. Here is a link that is useful
http://blogs.msdn.com/b/vijay/archive/2009/10/01/how-to-list-all-the-sub-sites-and-the-site-collections-within-a-sharepoint-web-application-using-windows-powershell.aspx
Cheers
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

Migration from iplanet webserver to Sun Directory Server

Hi,
I have Oracle Iplanet WebServer Enterprise edition V6.0 SP2 in my dev environment. I would want to migrate the system to Sun Java System Directory Server V6.0. I have looked up the migration guide for Sun DS V6.0. But i could not find any reference to Iplanet WebServers.
Can anybody please let me know the migration procedure for migrating from Iplanet Server to Sun Directory server.
Any help would be appreicated
Thank you
Nowfal

Please ignore this question since we have dropped the plan to migrate, instead set a new DS instance from the beginning

Migration from MS Exchange 2003 to Mavericks Server

Can anyone recommend a migration path from MS Exchange 2003 to OS X Mavericks Server? The key features to be migrated and used with the new server are: email, contacts, calendar, group tasks management, file sharing.
Also, any hardware recommendation? Is Mac mini enough for a group of about 6-8 other Macs or could we benefit from the new Mac Pro? Perhaps an iMac (with a Fusion Drive)?
Thanks for any suggestions.

Reginato Gobbo wrote:
knowing the limitations, I d´like to know if there is any tool to migrate all the mailbox from Exchange Server 2007 to Mavericks Server.
I don't think you know the limitations — Exchange Server provides rather more than what Postfix and Dovecot do.
This is a generic Exchange Server to Postfix/Dovecot migration, which — in conjunction with the imapsync option — might find some other discussions.
For migrating from Exchange Server itself, AFAIK, no, there are no packaged tools for that available. Tools such as imapsync can be used to migrate mail among imap servers, which can be an option here once imap is enabled on the Exchange Server, and once you know (or reset) all the passwords. Or you can select all and then drag and drop the messages.
Slightly closer to Exchange Server in capabilities are the Zimbra and Kerio products. Zimbra has migration tools, IIRC.
FWIW, please do not thread-jack, it just confuses the discussions — or at least it usually just ends up confusing readers. This is a very different question from the original, and should be its own separate thread.

Migrating from Snow Leopard to Mountain Lion Server

Hi all. I kinda drop in and out of this forum, mostly when I've got a puzzler that I can't figure out. My journey from Snow Leopard to Mountain Lion was a little slow. I tried to make the transition from Snow Leopard to Lion and failed, but this time I made it and I thought I'd share a little scratchpad post I wrote to document what I did. Mostly this is about adding back a few things that I really need. Here's the list of stuff that I added back:
Firewall management (IceFloor)
MySQL
Webmail, email filtering rules and email aliases (RoundCube)
"Group" emails (short, multi-recipient email exploders)
Mailing lists (Mailman)
I also dramatically improved reliability by adding a lot of memory, and doing nightly-restarts of the machine.
Here's a link to the post
http://www.haven2.com/index.php/archives/migrating-from-snow-leopard-server-to-o sx-server-mountain-lion
I'm happy to report that the new server has been running for a month or so and all seems fine. Whew. A long journey. Thanks to all of you who posted things that helped me along the way. Hopefully this will return the favor.

Moving from Snow Leopard to Mountain Lion means first installing the client (non-Server) version of Mountain Lion and then install Server.app this means that for at least part of the process you will not be running DNS, DHCP or Open Directory.
If you are going to end up using the same DNS name and IP address after the change then an approach you could follow would be as follows.
Destroy any Open Directory replicas
Archive your Open Directory Master (to make a backup)
Note down your DNS records in case they get messed up
Export via Workgroup Manager your users, and groups (you might not need this but better safe than sorry), make sure you do not include the diradmin account
Keep a full back of the server (you should always have backups)
Note down your DHCP server settings in case they get messed up
Note down any other service settings
Install Mountain Lion
Install Server.app
Install Workgroup Manager (extra free download)
Run Server.app
Make sure settings for services are as much as possible the same as before
If your lucky that may be all you need to do, otherwise...
Restore Open Directory archive, if your lucky that will be all you need to do, otherwise...
Make new Open Directory Master
Run Workgroup Manager
Import users and groups you previously exported
You will then have to set passwords for each user as these are not preserved via Workgroup Manager export
When I did this, I was also being forced to change all my IP addresses so I had no choice but to use Workgroup Manager to export and import accounts.

Mails lost in Sent Items since migration from 2003 to 2010

Since we have migrated almost all mailboxes from 2003 to 2010, we have a few (yet!) users that complain that Sent Items are missing. For example we have a user that says that the Sent Items older than 20/1/2014 are missing. So mails older than 2 weeks. All
users with similar problems, report that they also miss all mails previous from a certain period on. Like they are 'neatly' being archived/deleted.
I was thinking of the retention policies, but since I did not touch this area yet, since I am not familiar yet with this, I can't imagine that there is a default retention that just deletes mail older than 2 weeks. I certainly don't hope so. Where and how
can I check this? I would like to solve this asap before others users are going to report this as well!
Thanks in advance!
Olaf

Hi,
According to your description, emails are deleted without any archive and retention policy.
To narrow down the cause, I’d like to recommend the following troubleshooting:
1. Check if there is other retention policy:
Get-RetentionPolicy | fl name, RetentionPolicyTagLinks
Get-Mailbox AccountName | fl RetentionPolicy
2. Check if the Managed Folder Assistant service is working well
3. Check whether there is Event ID 9017 and 9018 in application log.
4. Please use MFCMAPI Tool to check the "PR_MESSAGE_DELIVERY_TIME" and "PR_CREATION_TIME" properties on the items that should be removed.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Step by Step Migration from Lync Server 2010 to Lync Server 2013

Similar Messages

Maybe you are looking for