Step by Step on Upgrade to OS X
I have 2 computers:
- iMac DV running 9.1 (320MB and no OS X)
- iBook running 9.2.2 (385 MB and it has OS 10.0)
I need to upgrade both to OS X. I have searched all over Apple's website and cannot find a simple step by step process to updgrade these computers and I don't even know which software or which if any memory to buy. Any help would be greatly appreciated. Thanks, LB :o)
iMac/iBook Mac OS 9.2.x
Hi lbunt,
first of all: WELCOME TO THE DISCUSSIONS!
Both your computers are compatible with Tiger. You should upgrade the memory though to at least 512 MB. Then upgrade the iMac to 9.2.1.
Make sure you buy the Tiger retail full install DVD: Mac OS X v10.4 "Tiger".
Insert the DVD into your drive and reboot while holding down the c-key. Then follow the onscreen instructions.
Similar Messages
-
I am looking for steps to upgrade our catalog database schema from 10.2.0.4 to 11.1.0.7. We want to register our prod 11g target database into our EM Repository 10.2 catalog database.
Can you please refer to doc / metalink note to upgrade 10.2 database catalog schema to 11g schema?
Thanks in advance.See this article:
http://download.oracle.com/docs/cd/B28359_01/backup.111/b28270/rcmcatdb.htm#i1007125
Werner -
Steps to upgrade Bw Objects from BW 3.5 to BW 7.0
I have upgraded a NW2004(BW3.5) system to NW2004s(BW 7.0) .
After upgrade i see that the infocubes, infoobjects are still in BW 3.5 Concept itself.
When i open each object and save it , it is changing to BW 7 Object. But there are about 10000 objects. Please let me know the steps to upgrade the Objects to BW 7.0Just upgrade.
There are some guides in service.sap.com and lots of notes on upgrade.
Reg efforts, it is totally dependent on the no of objects, etc to upgrade / convert and so many other factors. Even a rought estimate will not be possible without the knowledge of the system.
Ravi Thothadri -
Hi Support,
Could anyone please provide the steps to upgrade Oracle Database EE from 11.2.0.3.8 to 11.2.0.4.0.
Thanks
ImtiyazYou will need to install 11.2.0.4 into a new ORACLE_HOME, apply the latest 11.2.0.4 PSU patch to the new ORACLE_HOME (see MOS Doc 1454618.1) and then follow the steps in the Upgrade Guide
http://docs.oracle.com/cd/E11882_01/server.112/e23633/upgrade.htm#UPGRD003
see MOS Doc 1189783.1 -
We have two node clusterware installed and we want to upgrade the oracle clusterware from 10.2.0.4 to 11.2.0.2 can any one share the steps for upgrade.
Regards
Naveen DuttHi Rajeys,
I read all the documents but i was not able to find the information that i was looking. Below i am providing my cluster node configuration and version -
1) No of Node in cluster - 2 (node1 ,node2)
2) OCR (clusterware) version - 10.2.0.4
3) Storage type - NAS storage (we are not using ASM).
Now link provided by you is to upgrade ASM from 10.2.0.3 to 11GR2 but we are not using ASM as storage we are using NAS storage. Do we have any link or document that help me to upgrade oracle clusterware only without ASM from version 10.2.0.4 to 11.2.0.2 .
Thanks in advance
Regards
Naveen Dutt -
Steps to Upgrade PT8.49 to 8.50 Manually without using an Upgrade Template
Folks,
Hello. I am Upgrading PeopleTools 8.49 to 8.50 Manually without using an Upgrade Template because I cannot download an Upgrade Template from Oracle.
Upgrading is actually add/drop some tables/views in PeopleTools 8.49 Database using Chang Assistant 8.50.
According to the document "Enterprise PeopleTools 8.50 Upgrade" Chapter 3 and Chapter 4, after configure Change Assistant 8.50 and EMF, we need to creat an Upgrade job and run some scripts.
I have configured Change Assistant 8.50 and EMF. EMF run successfully. After that, I don't know the exact steps to do in Change Assistant.
Can any folks tell me the steps to upgrade PT8.49 to 8.50 manually in Chang Assistant without using an Upgrade Template after configure Change Assistant and EMF ?
Thanks.Do you know what is Change Assistant ? It is running job defined from template and indicate when step has to be done manually. But Change Assistant itself is nothing but an assistant, it does not build record, it does not run DMS, it does not run sql script, for all those Change Assistant is calling corresponding tools (AppDesigner, DataMover, SQL*Plus). Consequently, if you don't have template, you should do yourself every single step usually ran by the PsCA, but you won't need PsCA itself, just run manually whatever indicated in the doc (basically replace "PsCA" by "manually").
As I already told you earlier, it is tedious, but works fine if you pay attention enough.
HTH,
Nicolas. -
Steps to upgrade vsom from 6.3 to 7.2
Hi All.
one of our customer needs to upgrade his existing vsom and vsms from 6.3 to 7.2 and he
has purchased the below licenses and he dont need any of the existing data.
L-CPS-M-OM-SW7
L-CPS-M-MS-SW7
L-CPS-M-SASD-7.
as this is the first time I am upgrading to 7.2 can anyone please help me in this regard with simple steps to upgrade to 7.2 and do we need any other things apart from the above licensesLooking at your licensing, it appears that you have a fairly simple environment. If so, this doesn't have to be complex at all since the customer doesn't need any of the existing data. The simple solution would be to document your settings, approach this as a fresh install, and put your settings back.This will bypass any need for migration tools that might be needed to convert your database and save archives. I have no experience with these tools, so I'm not sure of their full capabilities.
About a year ago, due to learning the system and some poor configuration choices on the disk, I needed to migrate my 7.0 cameras to a new 7.2 system that was configured correctly. Here's how I did it.
1) Document, document, document. Take screenshot of all your settings. Take a backup of the database. Document the number of cameras you have, the number of templates, number of encoders, etc. This data will be used for verification after your migration.
2) Connect to the MySQL database and write queries to obtain the necessary information that is needed to do a bulk import (using Excel) of your cameras, encoders, templates, etc. Below is the SQL I used for my IP cameras. Note: Since analog cameras are configured differently, I used a seperate SQL for these. You should have a seperate SQL for each device type. Copy the results into an Excel spreadsheet.
****** List IP Cameras **********************
select a.name, a.model,
d.ipaddress,
e.name as 'Template',
f.name as 'Server',
(select name from groupinfo where objectid = a.location_objectid) as 'location',
(select name from groupinfo where objectid = a.pointtolocation_objectid) as 'pointToLocation'
from camera a,
networkconfig b, networkconfig_network_interface c, network_interface d,
devicetemplate e,
server f
where a.networkconfig_objectid=b.objectid and
b.objectid=c.networkconfig_objectid and
a.networkconfig_objectid=b.objectid and
c.networkinterfaces_objectid=d.objectid and
a.devicetemplate_objectid=e.objectid and
a.managedby_objectid=f.objectid and
a.objecttype=6
order by location;
3) Build out the new system using VMWare (or some other virtualization solution) to test your configurations that you saved in Excel. (This will also let you get the new spreadsheets so you can know what data you need for the import.) This will help you ensure that you do not have any syntax errors. For us, we were migrating from virtual to virtual, so the system we tested on became our new PROD and we simply deleted the old VMs after verifying the new worked. Do not have your cameras run on both systems though. From my experience, you will be fine to pre-provision the cameras to the test system, but do not have streams going to both simultaneously.
4) After you have tested your install and configurations, perform a full install on your Production system and load your configs.
This process worked extremely well for me because we have a fairly simple configuration. All our cameras are Cisco except for a few analog cameras that have been connected to Cisco-encoders. We have only two templates, which we documented manually instead of writing SQL since there were so few. Since we were virtualized, we could easily keep PROD up while we pre-provisioned the new system. If something didn't work, we could easily revert to the old system. I highly recommend testing this in a virtual lab first, because from my experience, I had to go through a couple of iterations in my SQL code to format the data and capture what was needed properly. The syntax can be a bit tricky your first time through. Also, verify (using the 7.2.1) release notes that all your devices are supported and at a supported level of code. For us, some of our cameras were not at supported levels and experienced dropped frames every few seconds until we upgraded these to supported code.
If your config is complex and you don't feel comfortable with the above steps, I recommend going with Scott's solution and seek help from a third party. Also, according to my recent conversation with TAC, skip 7.2.0 and go straight to 7.2.1. Apparently, there was a bad bug in the first one that, if encountered, could result in the loss of archives.
Hope this helps. -
Steps to upgrade 10.2.0.4 to 11.2.0.2.0
Hi all
please help me for below mention issue.
in our developement server we have four database and one ASM instance
we have to upgrade two database from 10.2.0.4 to 11.2.0.2.0 .one databasae is mount on ASM instance
others are normal
OS is AIX 5.3
pleas suggest me the the steps by steps to upgrade 10.2.0.4 to 11.2.0.2.0
which software i need to install.some doc says grid infra. etc.
pleas let me know i need to upgrade ASM instance ?
please help us to ,we ned to perform this activity.
Regards,Pl see the steps in the upgrade guide - http://docs.oracle.com/cd/E11882_01/server.112/e23633/toc.htm
Also see these MOS Docs
Oracle 11gR2 Upgrade Companion [Document 785351.1]
ASM 11gR2: How To Upgrade An ASM Instance To Release 11gR2 (11.2)? (***Updated***) [Document 950200.1]
and these presentations from Oracle
http://www.oracle.com/technetwork/database/upgrade/index.html
HTH
Srini -
Steps to Upgrade from DS 5.1 SP2 to DS 5.2 SP6
Hi Everyone,
Could someone please provide me with the steps to upgrade the server from Sun One Directory Server 5.1 SP2 to Sun One Directory Server 5.2 SP6. Please provide me with the documentation if any.Follow this guide.
http://docs.sun.com/source/816-6699-10/migrate.html#14992
-Akshay -
Steps to upgrade from 8i to 10g
i look for some documents about this topic 'steps to upgrade from 8i to 10g' but i couldn't find in the site...
would you mind tell me where can i find a complete document , or if you can tell me in details please.
thanks alot in advancehttp://download-west.oracle.com/docs/cd/B14117_01/server.101/b10763/toc.htm
Nicolas. -
Steps to upgrade from 8.81 PL01 to 8.81 PL05
Hi,
Please could someone help with steps to upgrade SAP Business One from 8.81 PL01 to 8.81 PL05. I have the 8.81 PL 05 downloaded available with me now.
Thanks in advance!!!!Hello
Steps:
1. Extract patch
2. Open patchreadme and read the first page, You can see the following:
You can upgrade your SAP Business One to 8.81 PL05 from the following versions:
o 8.8 PL21 and lower
it means you can go ahead from 8.8 PL 01 to 8.81 PL 05
Start upgarde exe, and follow the instructions on the screen. Basically you must upgrade everything.
Regards
János -
Can anyone help me with the steps to upgrade my Oracle version from 11.1.0.6 to 11.2.0.1 in windows.
Thanks in advance.If you are going to upgrade, you should upgrade to the latest 11gR2 patchset (currently 11.2.0.4). At a high level -
1. Install 11.2.0.4 into a new separate ORACLE_HOME - see MOS Doc 1562139.1 and Contents
2. Apply the latest 11.2.0.4 PSU bundle available for Windows - see MOS Doc 1454618.1
3. Use DBUA to perform the upgrade - MOS Doc 870814.1 and Contents
Also see
MOS Doc 1645862.1 -
Steps to Upgrade Oracle 9.2 to 11R2 on IBM/AIX 5.3
Hi,
I want the complete steps to Upgrade Oracle 9.2 to 11R2 on IBM/AIX 5.3 Non -RAC environment.
Also, I want the reasons to upgrade? What are the Advantages,Features and Benefits ?
Plz post the complete details here.
Thanks,
SaswatAll of the steps are documented in the Upgrade Guide - http://docs.oracle.com/cd/E11882_01/server.112/e23633/toc.htm
To upgrade directly (using DBUA or scripts) to 11gR2, you need to be at 9.2.0.8 version.
http://docs.oracle.com/cd/E11882_01/server.112/e23633/preup.htm#i1007814
HTH
Srini -
Steps to upgrade WS-C6509-E with 720 supervisor
Need steps to upgrade ios on WS-C6509-E
Dram size is 512 Mb
current image is loaded on sup-bootflash: 65536000
Question:
1 step to load ios , do we need to update boot room image
2 difference between bootflash and sup-bootflash:Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Hmm, older sup720s came with 64MB flash, which is insufficient for the later IOS images. There's, I believe, an upgrade kit to change your sup-bootflash to a (CF) sup-bootdisk, which can be much larger than 64 MB. Or, the sup720 has two external CF sockets, either of which can be booted from.
Do you need to upgrade your ROM? Probably not, but depending on what version your ROM image is, you might want to. You can review your ROM's known bug list and see if any are of concern.
What's the difference between bootflash and sup-bootflash? The former was the bootflash for the L2 engine, used when you run CatOS. The latter is used by the L3 engine, used by IOS. When running "native" IOS, the former isn't used for booting. -
Steps to upgrade oracle database from11.2.0.1 to 11.2.0.3 on Windows 2003 3
Hi,
Upgrade steps
1. Install 11.2.0.3.0 rdbms software
11.2.0.3 patch set is a full release.
Beginning with the release 11.2.0.3 patch set, you have two ways to apply a patch set
i)Out-of-place upgrade (Recommended) -- 11.2.0.3 will be installed as standalone at another location. So there is no impact on source oracle home and also DB upgrade will take less time
See Note 1276368.1 : Complete checklist for out-of-place manual upgrade from 11.2.0.1 to 11.2.0.2 , it is applicable for 11.2.0.3 as well
ii)in-place upgrade - 11.2.0.3 will be installed on top of 11.2 installation, So source oracle home will be replaced, Downtime will be high comparing out of place upgrade
for more info, Please refer to
Note 1189783.1 Important Changes to Oracle Database Patch Sets Starting With 11.2.0.2
11.2.0.3.0 software can be downloaded from My Oracle support: patch 10404530
https://updates.oracle.com/download/10404530.html
Please select your platform before downloading (Click on "Platform or Language" drop down menu)
if the platform name contains (32-bit) then it's 32-bit 11.2.0.3 client version
To install 11.2.0.3, you must download both p10404530_112020_<platform>_1of7.zip
and p10404530_112030_<platform>_2of7.zip
<platform> = your platform( ie for linux x86, download p10404530_112030_LINUX_1of7.zip and
p10098816_112030_LINUX_2of7.zip )
Note 1194734.1 : Where do I find that on My Oracle Support (MOS) [Video]
Note 549617.1 : How To Verify The Integrity Of A Patch/Software Download? [Video]
Note 169706.1 : Oracle Database Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2)
2) Finish the post installation steps as per the patchset README (readme.html).
3) upgrade the database to 11.2.0.3
Kindly ensure source database has all Valid DB components(dba_registry) and there are no invalid sys/system objects
Note 419550.1 : Different Upgrade Methods For Upgrading Your Database
Note 837570.1 : Complete Checklist for Manual Upgrades to 11gR2 (applicable to 11.2.0.3)
Note.870814.1 : Complete checklist to upgrade the database to 11gR2 using DBUA (applicable to 11.2.0.3)
4) After db upgrade, you can apply PSU patch of 11.2.0.3, it will give latest bug fixes of 11.2.0.3
The latest PSU patch is (Reference: Quick Reference To Patch Numbers For Database PSU, CPU And Bundle Patches (Doc ID 1454618.1))
14727310 (11.2.0.3.5) Jan 2013 DATABASE 11.2.0.3
Patch readme file has Installation instructions.
Oracle Database Upgrade Path Reference List (Doc ID 730365.1)
Thanks,
Krishna -
Steps to upgrading iphone 4 with iOS 5
Need steps to upgrading iphone 4 with iOS 5?
1. connect ur phone to ur mac/pc
2. open itunes ( make sure u have version 10.5 )
3. if it doesnt automatically ask u to update ur phone . click on summary and then click update
4. ensure that u backup ur data before updating.
5. click on download and install.
6. wait for a while and enjoy iOS5
Maybe you are looking for
-
I use Apple Mail on both my MacBook and iPhone to sync with my IMAP account and have recently acquired a problem: Although I don't use the To Do function in Mail, Mail has been creating an Apple Mail To Do folder in my iPhone/MacBook folder list. At
-
Problem in changing characteristics of material while sales order creation
Hello, My requirement is to change the characteristics of the material in a sales order before the sales order is saved. I tried using 'BAPI_OBJCL_CHANGE' but it aint working. In the debugging mode it is found that the program is searching for entrie
-
Permissions will not repair after update itunes 11.1
Permissions will not repair in Mountain Lion 10.8.5 after updating Itunes to version 11.1
-
Media manager shifts timecode on long clip copies
We make sub clips from an hour long show daily, then consolidate these sub clips using media manager to be their own master clips. Then we(theoretically) delete the entire hour show and work only with the clips we want. This has been working great fo
-
while on internet, I will have a volume control or equalizer bar abruptly appear across the screen that disconnects the internet and locks out other applications. It reflects "treble" or "base" - which ever is highlighted on the audio bar across the