Step by step procedure to create Enhancement spots, points and sections

Hi all,
Can anyone of you please provide a step by step procedure to create Enhancement spots, Enhancement points and Enhancement Sections and also give a brief explanation about the same ?
Regards,
Pramod

Hi Pramod,
The enhancement spots are used to manage explicit enhancement options. Enhancement spots carry information about the positions at which enhancement options were created. One enhancement spot can manage several enhancement options of a Repository object. Conversely, several enhancement spots can be assigned to one enhancement option.
Use
You create an explicit enhancement option when processing a Repository object with the relevant tool by creating an enhancement spot element definition at a point where this is possible. This enhancement option can then be called at different points using enhancement spot element calls. The enhancement spot element definition and the corresponding enhancement spot element calls make up the definition of an enhancement option. For example, when editing an ABAP program with the ABAP Editor, you can define explicit enhancement options in the form of the ENHANCEMENT-POINT statement, which also represents the element definition and element call.
Each enhancement spot element definition must be assigned to at least one enhancement spot. For this, an enhancement spot element definition is assigned one or more simple enhancement spots, which in turn are assigned to at least one composite enhancement spot. Simple and composite enhancement spots are Repository objects that form a tree-like structure, where the leaves and branches represent simple and composite enhancement spots respectively. A simple enhancement spot is always assigned to exactly one enhancement technology (ABAP source code enhancement or BAdI).
Composite enhancement spots are used for the semantic grouping of simple enhancement spots. A composite enhancement spot contains either one or more simple enhancement spots and/or one or more composite enhancement spots of the relevant type. You can use composite enhancement spots to combine simple enhancement spots into meaningful units.
The statement ENHANCEMENT-POINT can either be entered directly or created by choosing Edit → Enhancement operations → Create enhancement in the Enhancement Builder.
Kindly Reward Points If You Found The Reply Helpful,
Cheers,
Chaitanya.

Similar Messages

Can anyone let me know the step by step procedure for creating userexits?

Hi all,
can anyone let me know the step by step procedure for creating user exits? for any transaction code like mm01 or vd01. If you have any docs send it across to my email id : [email protected]
thanxs in advance
hari

Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
look in txn CMOD or SMOD, check enhancement 0VRF0001. It uses function module EXIT_SAPL0VRF_001. It is used to manipulate route determination for SD.
Here is the code
    DATA: ls_xvbpa LIKE xvbpa,
          lf_aland LIKE tvst-aland,
          lf_azone LIKE tvst-azone,
          lf_lland LIKE trolz-lland,
          lf_lzone LIKE trolz-lzone,
          ls_vbadr LIKE vbadr,
          ls_xvbap LIKE xvbap,
          ls_tvst LIKE tvst,
          lv_route LIKE trolz-route.
    LOOP AT xvbap INTO ls_xvbap.
      IF NOT ls_xvbap-vstel IS INITIAL.
        SELECT SINGLE * FROM tvst
          INTO ls_tvst
         WHERE vstel EQ ls_xvbap-vstel.
        IF sy-subrc = 0.
          lf_aland = ls_tvst-aland.
          lf_azone = ls_tvst-azone.
        ENDIF.
      ENDIF.
      READ TABLE xvbpa INTO ls_xvbpa WITH KEY vbeln = ls_xvbap-vbeln
                                              posnr = ls_xvbap-posnr
                                              parvw = 'Q1'.
      IF sy-subrc = 0.
        CALL FUNCTION 'SD_ADDRESS_GET'
          EXPORTING
            fif_address_number      = ls_xvbpa-adrnr
          IMPORTING
            fes_address             = ls_vbadr
          EXCEPTIONS
            address_not_found       = 1
            address_type_not_exists = 2
            no_person_number        = 3
            OTHERS                  = 4.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ELSE.
          lf_lland = ls_vbadr-land1.
          lf_lzone = ls_vbadr-lzone.
        ENDIF.
      ENDIF.
      CALL FUNCTION 'SD_ROUTE_DETERMINATION'
        EXPORTING
          i_aland             = lf_aland
          i_azone             = lf_azone
          i_lland             = lf_lland
          i_lzone             = lf_lzone
        IMPORTING
          e_route             = lv_route
        EXCEPTIONS
          no_route_found      = 1
          departure_error     = 2
          destination_error   = 3
          invalid_generic_key = 4
          customer_exit_error = 5
          OTHERS              = 6.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ELSE.
        ls_xvbap-route = lv_route.
        MODIFY xvbap FROM ls_xvbap TRANSPORTING route.
      ENDIF.
    ENDLOOP.
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.planetsap.com/userexit_main_page.htm
User-Exits
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/ab038.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.sap-basis-abap.com/sapab013.htm
http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
<b>Reward points</b>
Regards

Give me step by step procedures to create an infocube in BI 7

Hello Experts,
Can any one provide me with step by step procedures to create an infocube in BI 7 ?
Thanks in advance,
Jessica.

Hi,
) Create a data source
RSA1->Source Systems->FILE(File)->PC_FILE(Filesourcesystem)->Create Application Component(optional)-Create Data source
2) Create infoPackage
Right click on the data source and do
3) Create the data provider
4) Create Transformation
Right click on the data provider, choose 'create transformation' and choose your data source (give relevant data source and its type)
Just connect the relavant fields between your data source and data provider.
4) Create DTP
Then Double click on the DTP node created under yous transformations. choose the extraction mode as delta.
5) Load the data: there are 2 ways:
you can run the infopackage and DTP separately or create a process chain consisting of these infopackage and DTP and run.
Hope this helps.
Uploading of master data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. Alternatively monitor icon can be used.
BW 7.0
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
5. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
6. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
7. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
8. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
Activate DTP and in execute tab click execute button to load data in data targets.
BW is mainly for Reporting purpose on Organizations Historical Data.
It is a Data Warehousing solution developed by SAP in 1997. Using this we can analyze .....Subject Specific.....Integrated....Non volatile....Time variant Data in support of DECISION MAKING.
BW is offering End-End solution...like From Modeling to Repoting.
We can Extract data from 8 different source systems.
Business content is a big advantage.
Web Application Designer and integration to Portals are some other features of BW.
In ABAP ( R/3) Tables contain current data.
In BW Cubes contain historical Data.
R/3 is designed for Transactional purpose ( OLTP ).
BW is designed for Analysis purpose ( OLAP ).
Regards,
Medha.

Step by step procedure to create a partner profile

Hi,
Step by step to create a partner profile using the we20

HI,
IAM GIVING THE DOCUMENT WHICH COULD HELPS YOU NOT ONLY CREATING PARTNER PROFILES BUT ALSO TO SEND THE DATA BETWEEN SYSTEMS.
Application Linking and Enabling (ALE)
In this document you will learn the step-by-step procedure to setup the ALE system and go through a transaction between two clients
For our purpose we have two clients
namely Client 100 and Client 200.
System name is SAPKDC (FOR BOTH 100 AND 200 CLIENTS).
Distribution of Material Master Data Between two Systems
1) SETUP LOGICAL SYSTEM: (Note: Do Not Create This Step)
To do this follow the following steps
Execute SALE Transaction Code
On The Screen Click on Sending and Receiving Systems.
Then Click on Logical Systems.
Then Click Defining Logical Systems.
Click New Entries Button
(E.g. (LG100 sending system)
(LG200 receiving system))
Enter two logical system names and their description.
Save
Comeback to SALE Transaction Code screen.
2) Now you have to allocate the created logical systems to respective clients.( Note: Do Not Create This Step)
LG100 assign to client 100
LG200 assign to client 200
To do this, do the following.
Click Assigning Client to Logical System.
Ignore the message that comes up on the screen.
Select client 100
Click details button on the toolbar icon or press F2.
In the logical system box, enter LG100.
Click on the save Icon
Click the back button.
Now select client 200.
Click details icon or press f2.
In logical Systems box, enter LG200.
Save
Back.
Comeback to SALE Transaction Code screen.
3) Maintain RFC Destination: (TR.CODE:SM59)
(Note: Do Not Create This Step)
Click Create Button on the Screen
On the Screen Maintain RFC Destination i.e LG200.
Enter LG200 in RFC destination box.
Connection type is 3
Give a description for the RFC destination.
Maintain Technical Settings on Details on Technical Settings tab
Target Host as : SAPKDC (NOTE: Save it as a Host Name)
Maintain Logon Details on Logon/Security tab.
Language: EN.
User:      MMUSER200 (This is the logon for dist.)
Client :      200
Password:      MM1234.
Save.
Click on create to do the above process for Client 200 in
The client 200 system.
4) Maintain Distribution Model.(BD64). (ABAPer role starts here)
Execute Maintain distribution model directly for
creating the model.
Click on change mode button on App tool bar of the Screen.
Create Model View pushbutton on App tool bar of the Screen.
A pop screen will appear in which you specify
Short text as Distribution for MM Data.
Enter Technical Name as LGMODEL.
Select Model View and Click on Add Message Type Pushbutton on App toolbar of the Screen.
A popup screen will appear in which you specify
Model View as      LGMODEL.
Sender as           LG100.
Receiver as      LG200.
Again Click on Add Message Type Pushbutton on App toolbar of the Screen.
A popup screen will appear in which you specify
Model View as      LGMODEL.
Sender as           LG200.
Receiver as      LG100.
SAVE.
On the same screen goto Menubar and select Environment.
And then select Generate Partner Profiles , then execute it.
On the Screen specify the Logical System as LG200.
Then execute the screen.
Click back.
Again On the same screen goto Menubar and select EDIT.
Again select Model View and then select Distribute.
****LOGIN to client 200.
Execute Tr.code BD64 and again On the same screen goto Menubar and select Environment.
And then select Generate Partner Profiles , then execute it.
On the Screen specify the Model View as LGMODEL
And Specify the Logical System as LG100.
Then execute the screen.
Click back.
*******Switch back to client 100 Session.
5) Create Material using MM03 Tr.Code.
Enter the material name as LGMATERIAL
Industry sector as      Mechanical Engineering
Material Type as           Finished Products.
And then Click on Data Pushbutton on the App tool bar.
Select views.
In the select views box for materials check basic data 1 AND 2.
Click enter icon.
In the next screen that you get
Give the text of the material as NEW MATERIAL.
Base unit of measure as KG.
Gross Weight as 200.
Net Weight as 100.
Weight Unit as KG.
In the description area language (E) and material description.
Click Save.
Now I Created a Material in Client 100 , I want to transfer this data to Client 200.
6) Execute BD10 to transfer the material in which you specify
the material as LGMATERIAL and
message type as MATMAS (client100).
Then a Screen will be displayed in which it shows that
1 Master Idoc Generated .. Enter
1 Communication Idoc Generated..Enter.
*******LOGIN to Client 200.
7) Execute BD11 to get the material in which you specify
the material as LGMATERIAL and
message type as MATMAS (client200).
8) Execute Tr.code MM03 and give the material as LGMATERIAL
and see that the material is displayed as it was in Client 100.
If not follow these steps.
9) Execute Tr.code WE19( for rectification of errors in client200).
Specify the Existing Idoc Number and Executes it .
A Screen is displayed in which you specify the corresponding Function Module as INPUT_IDOC_MATMAS01 and execute it.
10) Execute Tr.code MM03 and give the material as LGMATERIAL
and see that the material is displayed as it was in Client 100.
Now the Material is correctly displayed in Client 200.
11) Monitoring of IDOCS.
Transaction Codes:
IDOC Display of Status: WE 05.
IDOC Date and Time:   WE07.

Request for Step by step procedure to create SRM User in detail

Hi All,
Could you please provide Step by step procedure to create SRM User in detail.
I have completed the following:
1. I created SU01 User.
2. I created Root Organistaion with PPOCA_BBP.
3. I went into PPOMA_BBP Tr. code and added Organisation structure like Root Organisation -> Organisation for Company Code -> Organisation for Pur Org -> Organisation fro Pur Group -> Position.
4. I got struck at assigning BusinessPartner for each organisation and creating Cntral Person
Plase provide further steps to copmplete SRM USer creation.
Thanks in advance,
Regards,
Siva

Hi
Are you using USERS_GEN transaction in SRM to create users ? Please read the SAP documentation in this case associated with the transaction using SRM GUI logon..
Which option do you use in USERS_GEN : file upload ?
In your case where the "US" (User) link is missing: is the SU01 user created ? Wasn't is already created before USERS_GEN ?
If the system is not able to create the CP <-> US relation, you should get back an error message in USERS_GEN.
Please go through the related very helpful pointers ->
Central Person
Re: Error while assigning user to a position
Re: How to assign contact person user id to Vendor uploaded from ECC?
Re: Central Person already exists
Re: Correct relationships not being created from USERS_GEN
Business Partner(BP) and Central Person(CP) distribution
Contact person of vendors created inconsistently in my organizative structu
Please revert in the event of any query.
Regards
- Atul

Step by Step procedure to create Smart forms

Hi Group,
Can any body please provide the good document or Link on Step by Step procedure to Create the Smartforms.

Hi,
Check these links and reward points if it helps.
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985

Step by Step Procedure to Create SAP MiniApp iView in Portal.....?

Hi All,
Please explain step by step Procedure to create SAP MiniApp iView in portal. And know me What is the MiniApp ID
parameter , in that What we give as MiniApp ID .

Hi sravani,
Please find the below link for creating MiniApp iview in portal
http://help.sap.com/saphelp_nw04/helpdata/en/e2/71db7fe73d7740be4e352d6d09f08e/content.htm
Thanks,
Rahul.

Reg: How to Create Enhancement spot in $TMP Package

Hi All,
i had seen so many eLearning concepts which sap provided to demonstrate the ENHANCEMENTS Topic,But in that they are using the Enhancement Spots which already created in $TMP Package,So To learn this concept i am trying to create the Enhancement Spots in $TMP , But it is not allowing me to create in $TMP and it's showing the error message like Enhancements can create in only 'SAP' Packages only,So if i will create in SAP Packages it is allowing,
But i would like to create Enhancement Spots in $TMP Package,So it would be appriciable any one could help me regarding this.
Thanks in Advance
Srihasa...

Thanks Rasheed for your quick response, i tried from the SE 38 To create Enhancement Spots in the $TMP Package,But it's not allowed me,Can you tell the way how to create the Enhancement Spots in the $TMP Package i mean is there any other Tcodes are available to create the Enhancement Spots.
Thank you..
Srihasa

I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the secnd point an end point. The pen tool stays active and I either have to clic

I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the second point an end point. The pen tool stays active and I either have to click to isolate the path or I have to return to the first point and close the path. Please help.

artisttouch,
If you cannot close the Pen Tool by switching to another tool, as a temporary measure you may try pressing P (for Pen).
To solve it, you may try the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Regarding main difference between Enhancement point and section

Hello,
Actually Iam new to Abap ,I would like to know the main difference between Enhancement point and section, so can you please give a brief clarification.
Thanks & regards,
Raju.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers]
Edited by: Thomas Zloch on Feb 5, 2012 8:59 AM

Hi Raju,
Please see the article below. He will help you:
[Introducing the Enhancement Framework: The Cool New Way to Enhance Your ABAP Systems|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/bb54c452-0801-0010-0e84-a653307fc6fc]
Regards,
Bruno Xavier.

Can anyone explain me step by step procedure for creating badi?

hi all,,
Can anyone explain me about badi with step by step procedure with an example like trsn code mm01, xd01 etc.
And what is the significance of badi?
regs
hari

Hi
Business Add-Ins
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits (SMOD/CMOD [Page 40]), two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-system infrastructure (SAP and customers), but instead allow for multiple levels of software development (by SAP, partners, and customers, and as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time.
In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example). All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard.
A single Business Add-In contains all of the interfaces necessary to implement a specific task. In Release 4.6A, program and menu enhancements can be made with Business Add-Ins. The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects
DEFINING THE BADI
1) execute Tcode SE18.
2) Specify a definition Name : ZBADI_SPFLI
3) Press create
4) Choose the attribute tab. Specify short desc for badi.. and specify the type :
multiple use.
5) Choose the interface tab
6) Specify interface name: ZIF_EX_BADI_SPFLI and save.
7) Dbl clk on interface name to start class builder . specify a method name (name,
level, desc).
Method level desc
Linese;ection instance methos some desc
8) place the cursor on the method name desc its parameters to define the interface.
Parameter type refe field desc
I_carrid import spfli-carrid some
I_connid import spefi-connid some
9) save , check and activateadapter class proposed by system is
ZCL_IM_IM_LINESEL is genereated.
IMPLEMENTATION OF BADI DEFINITION
1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.
2) Specify aname for implementation ZIM_LINESEL
3) Specify short desc.
4) Choose interface tab. System proposes a name fo the implementation class.
ZCL_IM_IMLINESEL which is already generarted.
5) Specify short desc for method
6) Dbl clk on method to insert code..(check the code in AAA).
7) Save , check and activate the code.
Some useful URL
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
Now write a sample program to use this badi method..
Look for BBB sample program.
AAA
data : wa_flights type sflight,
it_flights type table of sflight.
format color col_heading.
write:/ 'Flight info of:', i_carrid, i_connid.
format color col_normal.
select * from sflight
into corresponding fields of table it_flights
where carrid = i_carrid
and connid = i_connid.
loop at it_flights into wa_flights.
write:/ wa_flights-fldate,
wa_flights-planetype,
wa_flights-price currency wa_flights-currency,
wa_flights-seatsmax,
wa_flights-seatsocc.
endloop.
BBB
*& Report ZBADI_TEST *
REPORT ZBADI_TEST .
tables: spfli.
data: wa_spfli type spfli,
it_spfli type table of spfli with key carrid connid.
*Initialise the object of the interface.
data: exit_ref type ref to ZCL_IM_IM_LINESEL,
exit_ref1 type ref to ZIF_EX_BADISPFLI1.
selection-screen begin of block b1.
select-options: s_carr for spfli-carrid.
selection-screen end of block b1.
start-of-selection.
select * from spfli into corresponding fields of table it_spfli
where carrid in s_carr.
end-of-selection.
loop at it_spfli into wa_spfli.
write:/ wa_spfli-carrid,
wa_spfli-connid,
wa_spfli-cityfrom,
wa_spfli-deptime,
wa_spfli-arrtime.
hide: wa_spfli-carrid, wa_spfli-connid.
endloop.
at line-selection.
check not wa_spfli-carrid is initial.
create object exit_ref.
exit_ref1 = exit_ref.
call method exit_ref1->lineselection
EXPORTING
i_carrid = wa_spfli-carrid
i_connid = wa_spfli-connid.
clear wa_spfli.
u can find BADI's in different ways...
1>First go to any transaction->iN THE menu bar SYSTEM->STATUS->Get the program name ->double click->u will go to the program attached to the tcode.Now search term will be CALL CL_EXITHANDLER.Now u will get list of BADI'S available..
2>Goto SE24->Give class name as CL_EXITHANDLER->Display->double click on get_instance mathod->Now u will go inside the method->Now put break point on the cl_exithandler.Now go to any transaction code and pass dat..U will see that it will be stopped on the break point which u set on the cl_exithandler...In the exit name u can find list of badi's attached to the tcode..
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
The simplese way for finding BADI is
1. chooes Tcode Program & package for that Tcode.
2. Go to Tcode se18
3. Press F4
4. search by package or by program.
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
and
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
Badihttp://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm
sample code for Purchase requisition
BAdI Name: ZPUR_RFQ (Implementation name) Purchase Requisitions
Definition Name: ME_REQ_POSTED
Interface Name : IF_EX_ME_REQ_POSTED
Implementing Class: ZCL_IM_PUR_REQ
Method :            POSTED
METHOD if_ex_me_req_posted~posted .
DATA : v_mtart TYPE mtart.
DATA l_s_eban TYPE ueban.
LOOP AT im_eban INTO l_s_eban.
    IF l_s_eban-estkz NE 'B'.
      CLEAR v_mtart.
      SELECT SINGLE mtart INTO v_mtart FROM mara WHERE matnr = l_s_eban-matnr.
      IF v_mtart EQ 'ZERS' OR v_mtart EQ 'FHMI' OR v_mtart EQ 'UNBW'.
        MESSAGE e000(zm_msg) WITH 'You are not allowed' 'to create PR for stock items'.
      ENDIF.
    ENDIF.
    IF l_s_eban-knttp NE 'F' OR l_s_eban-pstyp NE '9'.
      IF l_s_eban-knttp NE 'A'.
        IF ( l_s_eban-pstyp NE '9' AND l_s_eban-pstyp NE 'D' ) AND l_s_eban-matnr EQ
space.
          MESSAGE e000(zm_msg) WITH 'You cannot create' 'a PR without material number'.
        ENDIF.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDMETHOD.
<b>Reward points for useful Answers</b>
Regards
Anji

Step by Step procedure to create an entire scenario Using CAF

Dear All,
I have a scenario to develop using Composite Application Framework.After creating the CAF i need to display the CAF on the portal. step by step procedure(if possible with screen shots) to create a CAF and how to find web services and then display this application on portal.
Thanks

Hi Yogi,
In your sceanario if you are looking to build either Enity or Application service then create it and test that service from "Service Browser". Once your service is working as per your reqyurements then we have to options to bring it into the Portal:
1. Generate Web Service for you Service (Entity or Application).
2. Consume that Web Service in WebDynpro application using Model concepts.
3. Deploy your WebDynpro Application into your portal Server.
4. Create a WebDynpro iView for your application and assign it any where you want.
OR
1. Generate WebDynpro model for your CAF application.
2. Create a public part for you application webdynpro project of your CAF application.
3. Create a new WebDynpro DC and use the Models generated for your CAF application.
4. Deploy your WebDynpro Application into your portal Server.
5. Create a WebDynpro iView for your application and assign it any where you want.
If you can give your complete scenario then that would be more helpful for any one to provide best answer which is approapriate for you.
Thanks,
Uday.

Step-by-Step procedure to create an InfoPackage Group & a Scenario!!

Hello BW Experts,
IF we have 10 InfoPackages and if we need to create an InfoPackage Group for 7 of them, How do we do it??
Plz provide a detailed Step-by-Step procedure for the same/ create an InfoPackage group!!
Ur help is really appreciated!!
Thanks & Regards,
Sapster.

Hello Stefan,
Thanks for ur response...with ur detailed steps..really helpful.
While sheduling at the last ..by clicking the context menu of our created IP Group.. I am not getting any screen to schedule the same..(I am getting amessage at the mottom saying its not possible to run it in the back ground for my client workstation or similar to this)
Could u plz let me know.. what it looks like for these remaining steps
"Right click on the InfoPackage Group that you just created -> Schedule -> Check that all InfoPackages are selected -> Schedule the job just as you normally do with a InfoPackage."... thansk again.. assigend points...

Pls send step by step procedure to create generated idoc type in ECC 6.0

Hi
pls send me the step by step procedure In ECC 6.0 Version
1) To create generated idoc type
2) To extended idoc type
3) How we can add structure to custom segments
thanks in advance

hi,
check these likns...
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
ALE/ IDOC/ XML
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
IDOC Convertion
/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment
regds,
paras

Step By Step Procedure to create a Planning Application

Hi All,
I am new to BPS, can any one plz provide the document to create a sample Planning Application in Step-By-Step procedure......
[email protected]
Thanks in Advance
Regards
Ramakrishna Kamurthy

Hi,
Pls go to :SDN-> elearning>SAP Business Intelligence->Begineers/Intermediate Courses--> (There are 4 demo's -step by step)1. Planning Modeler -eBook Oct 2007 10 min
This eBook Shows the easy of use the planning modeler for the creation of a plannng model with abministration tasks.
2.Planning: Variable Wizard - eBook Oct 2007 2 min
3.Web-based Planning with SAP BW-BPS
Also Pls chk this links;
create planning applications,
http://help.sap.com/saphelp_sem320bw/helpdata/en/05/242537cedf2056e10000009b38f936/frameset.htm
http://help.sap.com/saphelp_sem350bw/helpdata/en/05/242537cedf2056e10000009b38f936/frameset.htm
Hope this helps,
regards
CSM Reddy

Step by step procedure to create Enhancement spots, points and sections

Similar Messages

Maybe you are looking for