Step by step process to create domain name and active directory in windows 7 64 bit

Step by step process to create domain and active directory in windows 7 64 bit
I work in an organization
I want to create a domain name SBBYDP and make it server for other computers
I want that, all users’ have a personal account while they use any computer from this organization, even they use any computer from this network they use their own account to login to network.
And this may be in Active directory option.
I installed windows 7 professional edition 64 bit
Can any person help me? Step by step process, I always thanks full all of you

Hi,
You must use the Windows Server platform system for the AD service, you can refer the following KB first:
Active Directory
http://technet.microsoft.com/en-us/library/bb742424.aspx
AD DS Deployment Guide
http://technet.microsoft.com/zh-cn/library/cc753963(v=ws.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Difference between Windows NT domain registry and Active Directory registry

What are the difference(s) ?

Frank, thanks for your response :)
I want WebSphere Application Server to take advantage of a directory service. There are multiple options available for a directory service.
In my configuration the requirement is to make WebSphere Application server to use Microsoft's Active Directory.
While I was going through (WebSphere) documentation, I see following note.
" With Windows NT domain registry support for Windows 2000 and 2003 domain
controllers, WebSphere Application Server only supports Global groups that are the Security type. It is recommended that you use the Active Directory registry support rather than a Windows NT domain registry if you use Windows 2000 and 2003 domain controllers
because the Active Directory supports all group scopes and types. The Active Directory also supports a nested group that is not support by Windows NT domain registry. The Active Directory is a centralized control registry."
You can find the above note in this link (somewhere after 7th line)
http://www-01.ibm.com/support/knowledgecenter/SSAW57_7.0.0/com.ibm.websphere.nd.multiplatform.doc/info/ae/ae/csec_localos.html?cp=SSAW57_7.0.0%2F3-11-5-1-0-0
Does it mean that they are recommending to use Active Directory over Windows NT (which is an older approach) with windows server 2000 or windows server 2003 because Active directory is
advanced ?
I was under the impression that, Active Directory was started with Microsoft Windows Server 2003 and Windows NT registry was used till Windows 2000 server.
After going through above links,
Windows NT registry in an old method. However, it is compatible with Windows Server 2000 and Windows server 2003 but it is recommended to use Active directory with Windows Serve 2003 as it is more advanced. And the same is recommended in WebSphere documentation
(I am aware that support for Windows Server 2000 is over and only extended support is available for Windows Server 2003 however this is to clear doubt). Is my understanding correct ? And does windows server 2000 also support both i.e we can use either Windows
NT registry or Active directory and similarly, Either of them (Windows NT or Active Directory) could be used with Windows Server 2003 ?
And if I got it correct, Is Windows NT and Active Directory, both directory service offering from Microsoft? While NT being an old method and Active Directory being a new/advanced approach ?

Creating Domain at 0% - Oracle PFRD 11g - Windows Server 2008 64-bit

1.I want to install and configure Oracle FMW version 11.1.1.2.0 in Windows server 2008 64 bit.
2.I have followed the steps too as described here in these two forum links:
1.http://cn.forums.oracle.com/forums/thread.jspa?threadID=2245015
2.Creating Domain at 0% - Oracle PFRD 11g - Windows Server 2008 64-bit
3.I am giving my installtion steps..
I have installed JDK: 1.7.0.
I have succesfully installed web logic version wls1035_generic.jar.
I have also installed the FMW version 11.1.1.2.0 using all four disks(Install and donot configure.)
I have also installed patch version 11.1.1.3.0.
But When I am trying to run config.bat then It Stops at Creating Domain at 0%,nothing happens, process is sleeping:
It creates domain of size 9.23 mb and after a long time of approx 900 min It displays "DOMAIN CREATION FAILS".
I have also checked the path ..It doesnt contains any special characters.
Any ideas???

Hi John,
As per ur suggestion , I have successfully installed FMW 11g in Windows server without Domain Fail.
1). Installed JDK 1.6u29
2). Installed WebLogic 10.3.3
3). Installed FMW 11.1.1.2
4). Installed FMW 11.1.1.3 Patch
Now According to the Business need ,I want to install FMW 11.1.1.2 in Linux 32 Environment. Can U please guide me the versions of Java, Weblogic, FMW and its patch so that I can Install it in Linux 32 bit without Domain Fail.
Deepak Jha

Changing domain name and host name?????????//

Hai,
how to chane the domain name and hostname for LINUX ES 4.0 server.
is any impact On EBS 11.5.10.2 . if i change??

This is the command that I run at command prompt:
perl D:\oracle\VIS\db\tech_st\10.2.0\appsutil\bin\adgentns.pl appspass=secret \contextfile=conf_VIS.txt -removeserver
It returns:
'perl' is not recognized as an internal or external command, operable program or batch file.
Did you source the env file first?I apologize, what does this mean? I am running EBS12 on a WINXP environment, but this was the closest forum post I could find related to the topic.
From Article:
https://metalink.oracle.com/metalink/plsql/f?p=130:14:1947016216372695354::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,338003.1,1,1,0,helvetica
If you already changed the information of your existing AutoConfig Context file and
have not done the above step, then you can manually update the Net Services
Topology Model using the following syntax :
Locate the System Name :
The System name is the database name
Verify with sql query :
select DB_NAME from FND_DATABASES;I logged into the vision DB (VIS) as the system user id, via SQLPLUS, ran the query and it returned a table or view "FND_DATABASES" does not exists.
I changed the computer name, and changed the domain name (primary dns suffix).
I was successful using the Context Editor to edit both the DB and App context files, and ran AutoConfig for both the DB and Application (exists on the same machine).
I hope this provides more clarity....
Thanks
-J

Get the pc name with domain name and add it to my properties file using commands

i want to get the pc name with domain name and add it to my properties file using powershell .
sid

function Get-Environment{
[environment]|Get-Member -Static -MemberType Properties |
ForEach-Object{
if($_.Name -ne 'StackTrace'){
$v=[scriptblock]::Create("[environment]::$($_.Name)").Invoke()
New-Object PsCustomObject -Property ([ordered]@{Name=$_.Name;Value=$v[0]})
Get-Environment
Get-Environment | Out-String | Out-File environment.txt
¯\_(ツ)_/¯

Problem with external domain name and hosting

Hi I have my own domain name and hosting plan I want to use. However, I have trouble pointing my site from BC to my server.
I found the following information but in my case "create A-Records" is not available on the "Site Domains". Please advise.
Thanks.
Bonbon668
Point externally hosted domains to your Business Catalyst site
If you have chosen to use external DNS service for your domain name, create A-Records for both the www and non-www versions of your domain name. Then, point them to your site, which resides on one of the following IP addresses:

Hi
Can you please confirm that there is no “Create A records” option under “More Actions” ?

Domain name and iweb - masking url?

i have a domain name and want to use it for my website i created on iweb - is there a way to mask the url so when people type in my domain name they are directed to my iweb site??
thanks

Just go to the whatever place has your domain name and ask them or search in their FAQ or Help for how to do Domain Forwarding and Masking.

Domain name and search engines

Hi
There have been a few helpful postings about the importance
of having text on your frontpage for crawlers etc to improve your
search ranking. My question: how important is the domain name for
search engines? Is it worth investing a dime or 2 on a good generic
domain? If you needed to have 2 words (e.g. www.top-lawyer.com) is
it better to have them combined (e.g. www.toplawyer.com).
PS This is just an example...I am not a lawyer!

"Airborne Bob" <[email protected]> wrote in
message
news:[email protected]...
> Gareth:
>
> In my case, I have created my website at Domain Name
> www.LBIBeachRentals.NET.
> The .COM version was not available at the time I
obtained it.
>
> But I just purchased the .COM version this past Friday
because it became
> available and it's the more commonly accepted URL (and
as a preventative
> measure against someone else getting my rental people).
>
> Network Solutions tells me it's no problem.... they'll
just direct (or
> "point")the .COM to my .NET website. Is this okay in
terms of search?
> Are you
> saying I will somewhat diminish ranking by doing this?
>
> TIA for any advice on what I'm doing.
I think that your both confusing "domain names" and
"domain/web space
hosting" here.
Typically you register with a hosting company and receive an
amount of disk
space. bandwith etc and a domain name, say
www.thru-the-net.com
You create your web site and upload it to the serve and
people can access
your web site at www.thru-the-net.com
Now you realise that many people outside the US are entering
www.through-the-net.com so you get your provider to register
www.through-the-net.com for you as well and they POINT this
address to
www.thru-the-net.com. That is to say when people enter
www.through-net.com
the actually end up at www.thru-the net.com i.e. the same
place.
This is o.k. you can have as many variations as you want -
www.thru-the-net.com
www.through-the-net.com
www.thruthenet.com
www.throughthenet.com
www.thru-the-net.net
www.through-the-net.net
etc. all pointing to the same www.thru-the-net.com server.
This is o.k. and
the search engines don't mind this.
BUT
If you have SEPARATE web space for each of these domain name
variants and
just copy your entire site into each of these spaces, now the
domains are
not being forwarded. They are entirely stand alone domains
that are all the
same.
Search engines DON'T like these and see them as an attempt at
improving
ranking and therefore penalise all of them.
Sorry for being so long winded, but hopefully this makes
sense.
Regards
Phill

The publishing settings page does not open when I click on the domain name and the iWeb application will not stay on the dock.

Hello,
I have been trying to help a friend who is having problems publishing her website. (She has done so previously using Mobile me)
There seem to be a couple of things wrong with the application,
1 if I drag the application icon onto the dock, it won't stay there
2 I wanted to change where her site is published to (she has bought a domain name and has a hosting service now) but when I click on the domain name I do not get the "site publishing settings page" so we can't enter the new details. All that comes up is the main page of her website.
I would suggest uninstalling and re-installing Iweb, to see if that clears the problem, but as Iweb came pre-installed with her Imac, I am not sure that we can do this.
Any ideas please?
she's using and imac 24 in (approx 4 years old) and running osx 10.5.8

NO - not correct. Even if you are still using iWeb 08, you can still publish to another host and not MobileMe. You do this by selecting the option 'Publish to a local folder" and this will publish the site to your desktop and you can then use an ftp programme such as Cyberduck to upload your site to your host.
MobileMe will not be here after the end of June, so you will have to find alternative hosting. They are not taking any new subscriptions.
On new Macs, iLife 11 is pre-installed, but only iPhoto, iMovie and GarageBand are included, not iWeb and iDVD. The Apple Online store is not selling the boxed version of iLife 11 any longer, so if you want to upgrade to iLife, then you'll have to look online at Amazon.com or Amazon.co.uk for a boxed set of either iLife 09 or iLife 11. Both contains iWeb 09, which is what you would want.

Domain name and session

Hi ,
We have deployed our application on tomcat server built on struts framework.
We have also set the domain name and are redirecting the domain name to Static Ip
where our application is deployed with URL Masking option enabled.
Everything is working fine in Firefox.But in IE6 and IE7 we are facing issues related to sessions.
Example:
it works when we access directly
http://156.78.78.89:8000/myapp/login.do?method=display
     when i redirect this with a domain name(with URL masking enabled) like
     http://www.mydomain.com It does not work.
     I am not able to login into application(using sessions of this) or use shopping cart(using cookies)
Cookies are getting disabled and there is no session maintainance.
Is it problem with struts config or tomcat server?
I am unable to take my application live because of this issue.
Please help me to solve. Thank you for your time and consideration
email:[email protected]

Hi BKBK,
I'm using CF10 and aplicaction.cfc

<cfset THIS.name= "GuarderiasGMX2"/>
<cfset THIS.applicationTimeout = createTimeSpan( 0, 1, 0, 0 ) />
<cfset THIS.sessionManagement = true />
<cfset THIS.sessionTimeout = createTimeSpan( 0, 1, 0, 0 ) />
I don't use cookies to set the session. I only use cfcookie for kill the session on the application.cfc when the user sign out.
<cffunction
name="onRequestStart"
access="public"
returntype="boolean"
output="false"
hint="I initialize the page request.">

<cfset var local = {} />



<cfif structKeyExists( url, "killSession" )>

<cfloop
index="local.cookieName"
list="cfid,cftoken,cfmagic">

<cfcookie
name="#local.cookieName#"
value=""
expires="now"
/>
</cfloop>

<cflocation
url="index.cfm"
addtoken="false"
/>
</cfif>
Regards

Will vmware horizon work after change domain name and ip adress and vcenter ?

Hi
i have a question
i have to migrate all of my vmware horizon but for example my domain name is now a.com but i have to migare it to new domain b.comit means my domain name and ip adress will be change also connectios server ip adress vcenter ip adress now i want to know if my domain name and ip adress change and also all of my vm and vcenter and ... change will vmware horizon work after these changes ?
best regards
Babak

Horizon View is depended on AD and this task is not trivial.
What needs to be done depends on your setup and configuration and you will need assist from VMware Support and you should first replicate the setup in a test-environment.
// Linjo

Get Windows domain name and user through jsp

I have a jsp page that will be viewed through ie on windows platform, that is a member of domain.
I need to get the domain name and logged in windows user name to use it in my page.
I've looked through similar topics. Found no answer.
1.
System.parameter("user.name") is not ok. it returns user that runs jvm.
2.
import com.sun.security.auth.module.NTSystem;
NTSystem system = new NTSystem();
system.getDomain()
system.getName()that didn't work through jsp, though the answer is correct.
3. I found some api at http://www.sinotar.com/download/swin/doc/index.html
it did the right thing, but it's not free.
Could anyone advice me smth?
I've looked

well, it won't work in your jsp because jsps run server-side
could try putting an applet on your page that does it, but I wouldn't be surprised if the security manager put the kibosh on that, too
a third - but clunky - way would be to write a quick java app that does it, and launch it through WebStart. bit ugly, and needs extra user input they might not want to do

Resolving local domain name and nameserver address

Hi,
Is there any way to get the local domain name (on Windows it would be NT domain name and on Unix based platform it is DNS server's domain name) and local DNS server address ?
Thanks,
Rohit

import java.net.*;
try
   InetAddress ip = InetAddress.getLocalHost();
   String fqdn = InetAddress.getCanonicalHostName();
   int firstDot = fqdn.indexOf(".");
   String domain = fqdn.substring(firstDot+1);
   System.out.println("domain: "+domain);
catch(Exception ex)
   ex.printStackTrace();
}

If default domain name and server name is not accepted weblogic server 6.1 does not start as NT service

I want to change the domain name and the server name ( I do not want
mydomain, myserver) while installing
weblogic as an NT service. After installing and starting weblogic from NT
services program, weblogic does not start
But if I start it from the command script, it starts
Thanks
madhu

Hi,
I could start weblogic as an nt service by changing the name of the
default server and domain. I had to include password in the
installNTservice script.
Thanks
Madhu
Michael Young <[email protected]> wrote in message
news:[email protected]..
Hi.
Please open a case with BEA support.
Thanks,
Michael
m holur wrote:
I want to change the domain name and the server name ( I do not want
mydomain, myserver) while installing
weblogic as an NT service. After installing and starting weblogic from
NT
services program, weblogic does not start
But if I start it from the command script, it starts
Thanks
madhu--
Developer Relations Engineer
BEA Support

Domain name and IP address - 11.5.8

Hi All,
We are running Oracle Application 11.5.8 on HP-UX (two node). Now we want to change Domain name and ip address of the server.
How can I do this. From where can I get the documentation for this task.
Thanks.

Hi, this job is very easy if you use autoconfig tool, for maore information you can read the note 165195.1 in Metalink.
Good Luck...

Step by step process to create domain name and active directory in windows 7 64 bit

Similar Messages

Maybe you are looking for