STEP BY STEP PROCESS TO IMPLEMENT BW IN A SAP - R3 ENVIRONMENT
Hai experts!!!,
An organisation is running on SAP for the past 3 years, it is planning to implement SAP-BW. what are all the steps for implementing this process.
Thanks in advance.
Regards,
Giri
Hi Giri
Your question seems very simple but to answer it here on the SDN requires tremendous energy and also just may not be possible.
Have a look at the sap help to have glimpse of SAP BW.
http://help.sap.com/saphelp_nw04/helpdata/en/b2/e50138fede083de10000009b38f8cf/content.htm
Wish you all the best for yor SAP BIW implementation.
regards
Similar Messages
-
Steps or process of implementation project
hi friends
i am deva
what are the steps are involved in sap project implmentation in a orgn?hi,
The ASAP methodology is recommended by SAP for implementation planning and system implementation. It has the following phases.
Project Preparation - The primary focus of Phase 1 is getting the project started, identifying team members and developing a high-level plan.
Business Blueprint - The primary focus of Phase 2 is to understand the business goals of the company and to determine the business requirements needed to support those goals.
Realization - The purpose of this phase is to implement all the business and process requirements based on the Business Blueprint. You customize the system step by step in two work packages, Baseline and Final configuration.
Final Preparation - The purpose of this phase is to complete testing, end-user training, system management and cut over activities. Critical open issues are resolved. Upon the successful completion of this phase, you will be ready to run your business in your productive R/3 system.
Go Live and Support - Transition from a project oriented, pre-productive environment to a successful and live productive operation.
Def:The Accelarated SAP is the implementation solution provided by SAPwhich integrates several components that works in conjunction to support the rapid and efficient implementation of the PROJECT.
PHASES IN ASAP METHODOLOGY
1.Project Preparation
2.Business Blue Print
3.Realization
4.Final Preparation
5.Go-Live and Support.
1.PROJECT PREPARATION WE HAVE 8 STEPS.
1A.SCOPE OF PROJECT
1B.PHASES INVOLVED
1C.SYSTEM LANDSCAPE
1D.TEAM FORMATION
1E.DEADLINES OF THE PROJECT
1F.BUSINESS PROCESS DOCUMENTS (OR) BUSINESS REQUIREMENT
SPECIFICATIONS
IN 1F AGAIN WE HAVE 5 STEPS....Pls dont get confused.
1F ->A1-REQUIREMENTS OR EXPECTATIONS
A2-GENERAL EXPLANATIONS
A3-SPECIAL ORGANIZATIONAL CONSIDERATIONS
A4-CHANGES TO EXISTING ORGANIZATION
A5-DESCRIPTION OF IMPROVEMENTS
1G-TECHNICAL REQUIREMENTS
1H-KICK-OFF MEETING
2 BUSINESS BLUE PRINT . IN THIS WE HAVE 8 STEPS
2A.ORGANIZATIONAL STRUCTURE
2B.DATA COLLECTION SHEETS
2C.DATA CONVERSION STRATEGY
2D.BUSINESS BLUE PRINT DOCUMENTATION
2E.CUSTOMIZATION
2F.ESTIMATION OF DEVELOPERS
2G.COMMUNICATION STRATEGY PLAN
2H.DEVELOP THE SYSTEM ENVIRONMENT
2I.USER ROLES AND AUTHORIZATIONS.
3. REALIZATION . HERE WE HAVE 7 STEPS.
3A.ORGANIZATIONAL CHANGE MANAGEMENT
3B.BASELINE CONFIGURATION & CONFIRMATION
3C.UNIT TESTING
3D.FINAL CONFIGURATION AND CONFIRMATION
3E.FUNCTIONAL SPECIFICATIONS.IN 3E , WE HAVE 3 STEPS AGAIN...
3E1.SOLUTION INFORMATION
3E2.OBJECT INFORMATION
3E3.REVISION HISTORY....WE HAVE 12 STEPS HERE .....
3E3A.DESCRIPTION AND PURPOSE
3E3B.BUSINESS PROCESS DETAILS
3E3C.CURRENT FUNCTIONALITY
3E3D.EXPECTED FUCNTIONALITY
3E3E.SAP SITUATIONAL ANALYSIS
3E3F.ADDITIONAL INFORMATION
3E3G.FORMS
3E3H.REPORTS
3E3I.INTERFACE
3E3J.DATA MAPPING
3E3K.APPROVAL AND MODIFICATION HISTORY
3E3L.ADDITIONAL ATTACHMENTS.
3F.TESTING THE PROGRAMS
3G.PREPARING THE ENDUSER DOCUMENTATION
4.FINAL PREPARATION
WE HAVE 4 STEPS.....
4A.UPLOADING THE STIMULATED DATA
4B.INTEGRATION TESTING
4C.CUTOVER ACTIVITIES
4D.PRE GO-LIVE END USER TRAINING
5.GO-LIVE AND SUPPORT
SIGN-OFF MEETING
CHAN -
Step by step process to implement the SAP ITS Mobile application
Hello Experts ,
I need Information on the SAP ITS mobile (Internet tranasaction server ).
We are currently using the RF transaction through character based hand held devices through SAP Console , Now we would like to use the GUI Touch Screen based devices .
For this we need to convert from the existing SAP Console transactions to use the functionality of ITS mobile.
I am new for this , Can you please provide the detailed configuration with step by step process to implement the SAP ITS Mobile application to fulfilll above requirment .
Best Regards,
RpHello,
Please refer to this documents:
[Implementation WM for Mobile Devices Using ITS|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/0026c5f5-0eca-2c10-25a3-c0ed87478812&overridelayout=true]
[ITSmobile wiki|http://wiki.sdn.sap.com/wiki/display/HOME/ITSmobile] -
Step by step process to implement SSL
I am new to SSL implementation. I would like to know the step by step process to implement SSL for a webpage. I have gathered few information about SSL and I am not clear as what exactly to be done.
My requirement:
I have learned how to create a certificate using keytool and I am not clear what has to be done after that. Let me put what I understood so far.
1. I should create a certificate using keytool at server side.
2. When the client requires the page I am not clear what should be done such as certificate verification etc., and how. Can anyone please tell me the exact procedure to implement the SSL.
Thanks in advance.....You need to read the JSSE Reference Guide.
-
Menu Exit & Screen Exit Implementation Step by Step Implementation Needed:
Hi Experts,
I am in need of how to implement Menu Exit and Screen Exit using a simple
example.If any step by step implementation through snapshots were it will be
helpful instead just some links that doesn't work after some steps due to version
changes or not proper steply explanations.Points will be rewarded accordingly.
Thanks for your help in Advance.Hi Sudha,
Screen exits are exits that allow you to use a reserved part of the screen (A subscreen) to display or input data.
It is determined be SAP where the sub screen will be displayed.
The syntax is: CALL CUSTOMER-SUBSCREEN
The screen exit is not processed untill the corresponding subscreen has been created in an enhancement project, and the project has been activated.
Note:
Function codes are only processed in the main screens flow logic
You are not allowed to enter a name for the subscreens command field
You are not allowed to define GUI stauses
You are not allowed to enter a value for Next screen
The global data of the program is not available for the subscreen. Data for the subscreen is provided by function modules. These function modules belongs to the same function group as the subscreen
Subscreens are edited with transaction CMOD. When you activate a project containg subscreens, the calling screen is regenerated and the subscreen is displayed next time you display the calling screen
The developer must create the subscreen and the corresponding PBO and PAI modules
How to identify screen exits
Look after CALL CUSTOMER-SUBSCREEN in the screenprogram of the screen you want to modify.
Use transaction CMOD menu Utillities -> SAP enhancements to search for screen exits
MENU EXITS
Menu exits allow you to add your own functionallity to menus. Menu exits are implemented by SAP, and are reserved menu entries in the GUI interface. The developer can add his/her own text and logic for the menu.
Function codes for menu exits all start with "+"
Example
We want to create a new menu item in the Office menu. The text for the menu should be "Run ZTEST", and the menu will
run report ZTEST.
Goto transaction SE43 Area Menu Maintenance
In Area Menu Paramenter type 'S000' (S triple Zero)
Select Change and ignore all the warning screens
Expand the office menu. In the buttom of the office tree you will find a menu named "Customer function"
Double click on the text. In the pop-up screen change the text to "Run ZTEST". Note that the trsnaction code is +C01
Goto transaction SE93 and create transaction +C01 that calls report ZTEST.
Now you will se the menu displayed in the office tree. If you delete transaction +C01 again, the new menu will dissapear.
USER EXITS
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a functionmodule. The code for the function module is writeen by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is: EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as: CALL CUSTOMER.-FUNCTION <3 digit suffix>
Example:
The program for transaction VA01 Create salesorder is SAPMV45A
If you search for CALL CUSTOMER-FUNCTION i program SAPMV45A you will find ( Among other user exits):
CALL CUSTOMER-FUNCTION '003'
exporting
xvbak = vbak
xvbuk = vbuk
xkomk = tkomk
importing
lvf_subrc = lvf_subrc
tables
xvbfa = xvbfa
xvbap = xvbap
xvbup = xvbup.
The exit calls function module EXIT_SAPMV45A_003
2. How to find user exits
Display the program where you are searching for and exit and search for CALL CUSTOMER-EXIT
If you know the Exit name, go to transaction CMOD. Choose menu Utillities->SAP Enhancements. Enter the exit name and press enter.
You will now come to a screen that shows the function module exits for the exit.
3. Using Project management of SAP Enhancements
We want to create a project to enahance trasnaction VA01
Go to transaction CMOD
Create a project called ZVA01
Choose the Enhancement assign radio button and press the Change button
In the first column enter V45A0002 Predefine sold-to party in sales document . Note that an enhancement can only be used i 1 project. If the enhancement is allready in use, and error message will be displayed
Press Save
Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002. Double click on the exit.
Now the function module is displayed. Double click on include ZXVVAU04 in the function module
Insert the following code into the include: E_KUNNR = '2155'.
Activate the include program. Go back to CMOD and activate the project.
Goto transaction VA01 and craete a salesorder. Note that Sold-to-party now automatically is "2155"
Please check if the thread given below would be of any help.
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/menu-exits-72696#
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
Regards
KK -
NLS(Near Line Storage) Step by Step Implementation
Hi Experts,
Our current system has data in the info cubes which dates back to 10 years.
Business demands that they cant discard old data.
We have proposed archiving of data older than 7 years and NLS for data older than 3 years.
I guess archiving can be done by BW team with slight cost of disk storage.
I have gone through this road map for NLS given below, and noted that extra costs involved in purchasing the third party tools for NLS process.
Can anyone throw some light on the justification that we need tell the client for this cost, (is it just the query optimization)
http://ecohub.sdn.sap.com/irj/sdn/nw-datamanagement?rid=/library/uuid/cfbb8965-0901-0010-c6ac-c30a7a3c748e#q-3
Please Suggest
Thanks
ElSimon, Thanks for the reply
1) I understand the importance of NLS, but if we implement NLS, the data will be stored in a third party location?
Correct me if I am wrong
If this is the scenario, then the clients might not agree to their data being stored elsewhere.
2) Is there any step by step guide for BW team to follow if we implement NLS or is it complete taken care by the third party vendors.
Thanks
El -
Regarding step by step process
what is the process of development of an object
could u plz explain clearly.
which means what are the steps we go through before implementation of an object.
how will assign the work and when we get any trouble in spec what would we do?Hi,
First you receive the functional Spec or technical spec from the onsite.
If it is a Technical spec it is easy for the developer to write code.
But in the case of a Functional spec , take the help of a Fun guy and prepare the tech spec first then start coding.
After preparing the tech spec, it has to be reviewed along with your PL, Testing person.
then clarify the doubt's/logic if any and start the coding.
Once the coding is over, then it has to be tested/checked by a Senior of your team and if any mistakes are there he will tell you and you will correct them, it is called Code walk through.
Then You prepare a Unit testing Doc (UTD) for that with some test cases.
After that give that object to testing people, they will test it based on their rules and conditions and once it is over, they will send it to quality and the object is delivered to client from quality.
reward if useful
regards,
ANJI -
Any step-by-step guide for implementing intermediate event?
Hi All,
I am trying to implement intermediate event in my BPM and so far I have created:
1) An intermediate event
2) WSDL file
3) A message trigger
But I am not getting how to proceed further. In the following document I found that a context DO needs to be used: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0369539-e876-2d10-ef93-8f30e112ee6d?quicklink=index&overridelayout=true
But I am not sure which context it is referring to?
Is there any step-by-step guide to implement this? or any wiki link?
AmeyaHi Ameya,
Follow below steps:
1. Create WSDL file
2. Create an intermediate event in process modeling screen
3. Click on Intermediate event> Properties>Event Trigger
4. TRIGGER Drop Down> New
5. Give Name to your Message Trigger>Next
6. SERVICE dropdown>Select the WSDL created> Finish.
And I suppose they have mentioned Data Object for using it in coorelation condition.
Correlation condition is a boolean test which should be True(default) for the ntermediate message to be triggered.
As there will be mutliple process instances, when PI (in your case) trigger the intermediate event (consume WS) we can give a correlation conditon to check whether it is for the right process instance.
In you case you can store the Request ID in BPM DO, and also request it from PI while consuming WS and validate it in correlation condition.
Regards,
Unni
Edited by: UnnikrishnanSreekumar on Oct 13, 2011 12:51 PM
Edited by: UnnikrishnanSreekumar on Oct 13, 2011 1:00 PM -
Step-By-Step guides/links to implement Service Manager
Step-By-Step guides/links to implement Service Manager
Can you provide step by step instructions to build a model of my house?
i'm not being flippant or joking, the problem is really down to building a model of your IT Department in Service Manager. There is no step by step guide to model your businesses unique processes and procedures.
If you want to stand up an environment, so you can get familiar with the product and start modeling your environment, then you might want to start with some of the
Test Lab Guides, or contact a consulting company who can help you plan and architect your service book, delivery model and finally your SCSM environment. FULL DISCLOSURE: I am
such a consultant, so I might just be advising you to go buy my services. -
What is the step by step implementation procedure of SAP
Hi,
Can any one explain step by step procedure in real time to implement SAP for an enterprise ? I just confused over what are the things to customized by Functional consultant and what are the things to be create as an ABAP programmer ? when to create a table and when to use existing one.... wheree to start implementation ?....Instanciation would be very much usefull to me.
Thanks & Regards
mahesh.hi,
steps
functional consultants job
1. bussinees study
2.identifying the gaps( already available in SAP - new thing we have to develop for the bissiness)
3.bussiness blue print preparetion.
4.developing Development request Form( DRF)
ABAPER comes into picture
1.preparing High level design
2.fill the gaps identified by develepinf code
3.prepare Low level design
again Funtional consultant
1.testing the bussiness process.
2.make it live with the hlp of ABAPER.
this is in brief.
rgds
anver
if hlped mark points -
I am trying to upgrade EPM 8.9(8.49.23) to EPM 9.1 (8.53.08). During dataconversion step the AE process finished succssfully in few seconds. When i see the log it says "There are no conversions to run for upgrade path PF89 (18028,10003)". Please let me know why it didnt do any conversion. Am i missing something?
yes, that app engine didnt inserted any rows. So now when i tried to drill down i found that there was no data in the "new demo" database on table UPG_DATACONV. That is the reason for all this.
When i applied required for upgrade patch in demo it said couple of patch already exists so those update i skipped. Now when i check upd877654 has a step which imports the data in this table. my change assistant told that the update is already available in my demo so i skipped. Now i am not sure what to do.
I tried reimporting the data and running the analyzer again. But worried that there can be any issues due to this. -
i have a canon hf10 and need to be able to transfer my video from my camera to my computer so I can burn them to dvd is there a step by step process? i'm new 2 the mac world. I tried downloading imovie 7.1.2 but it said, "An eligible iMovie application was not found in the location /Applications." can anyone give me step by step instructions? i would hate to call the geek squad!!!LOL
and what's a firewire port? how do i know if i have one?
-
Help wanted - step by step process on how to use two ipods on one computer
I'm just in the process of getting an ipod (waiting on delivery!) and want to know how it is possible to have two ipods using the same computer but synchronizing differently. I don't want to risk losing my partners music (he'll be very upset!) and I don't want to end up with his music on my ipod. I'd appreciate it if someone could give me a step by step guide or tell me where the best place to look for the answer is. Is it possible somehow to have two different libraries on one computer? Is that how it works?
There are a couple of methods for using more than one iPod on a single computer. Have a look at the article linked below. Method one is to have two Mac or Windows user accounts which by definition would give you two completely separate libraries. Method two as Chris has already described above is to set your preferences so each iPod is updated with only certain playlists within one library. Have a look anyway and see what you think and go for whichever you feel suits your needs best: How To Use Multiple iPods with One Computer
-
Need to know how to get my apple account to sync up with a new email on my phone and delete the old one in a step by step process??
After you change the account settings as I described below hold your finger on any app until they all wriggle, then tap the "-" on each purchased with her Apple ID. Press the HOME button when done. Then go to the App Store and buy or download the apps you want.
-
Honestly, I have never had a customer ask me 'how' do I identify which Items go together in a specific category. I am thinking I start with the Functional Area (Inv, PO, OM, WM, etc..) attributes, and start the grouping there. The customer is asking for "best practices" - any input would be appreciated.
I have a fresh install of Oracle Inventory, Purchasing, Order Management, Service - We have 2,000,000 part numbers.
How have you instructed your customers/clients (both Internal and External) in the PROCESS of categorizing all of their Items?
What is the Step-by-step process of grouping those 2MM items into accurate Category Sets and more accurately into the most correct Category.
I would 'assume' it would start with some analysis with all the Items listed with all the item attributes, and start with ECCN (for example) or Item Type grouping. Then...(?)
Thanks!
rdNo answer to No.1 but I really want to find it out too.
No.2
If you already know list of the categories & ID you can manually create a list of checkboxes
<input type="checkbox" name="CAT_Category" value="89081" />
<input type="checkbox" name="CAT_Category" value="89082" />
<input type="checkbox" name="CAT_Category" value="89083" />
something like that should work
Maybe you are looking for
-
How can I find an average in a column but exclude "0" and "100"
I have one sheet that I use to track all my projects across various clients. Like this: A B C D 1 Job# Gross Input Client 2 1234 $10,000 37.5 ACME 3 1235 $20,672 39 Widgetmakers 4 1236 $25,098 41 ACME 5 1237 $67,987 48 ACME 6 1238 $14,890 100 ACME 7
-
Getting error when rasing request in OIM using API
Hi, I am getting the following error when I am trying to raise a request from outside OIM using OIM API's. Exception in thread "main" java.lang.NoClassDefFoundError: org/eclipse/persistence/indirection/ValueHolderInterface at accesspolicycreatio
-
Help needed in changing Access query to Oracle query
hello folks, I have already posted this question and got some help previously but i have additional query being added to the previous one so thought of seeking some help.here it goes Am having an access report which comes from a query. the current qu
-
Two days in a row now one of my clients has come into the office to find that their SBS2011 is no longer responding to requests, and logon times take between 15 and 30 minutes before reaching a usable desktop. The SBS2011 server is a guest VM on a Wi
-
How let labview to verify string is in Scientific Notation.
Hey all, I want labview to convert a spreadsheet string to an array. This is easy using the 'spreadsheet string to array' tool. The only problem I've got is that I get the string from a RS232 device and it is time critical. Example: If I read the dat