Step by step process to upgrade EP 6.0 to EP 7.0

Hi all,
Can any one plz tell me the process of EP7.0 Upgradation?
EP7.0 is newly installed on the Other System.
=> I need information regarding the initial System Configuration settings.
=> can we transport the users/groups from EP 6.0 System to EP7.0 System?
=> Step By Step process of the integration of portal content into EP 7.0.
Thanks and Regards,
Visweswar

Hi,
All the upgrade information is available at http://service.sap.com/instguides -> Upgrade.
Also check the Upgrade Master Guide:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a1a0eb43-0b01-0010-23aa-908cc4eaabcd
Regards,
Praveen Gudapati

Similar Messages

I am trying to upgrade EPM 8.9(8.49.23) to EPM 9.1 (8.53.08). During dataconversion step the AE process finished succssfully in few seconds. When i see the log it says "There are no conversions to run for upgrade path PF89 (18028,10003)". Please let me kn

I am trying to upgrade EPM 8.9(8.49.23) to EPM 9.1 (8.53.08). During dataconversion step the AE process finished succssfully in few seconds. When i see the log it says "There are no conversions to run for upgrade path PF89 (18028,10003)". Please let me know why it didnt do any conversion. Am i missing something?

yes, that app engine didnt inserted any rows. So now when i tried to drill down i found that there was no data in the "new demo" database on table UPG_DATACONV. That is the reason for all this.
When i applied required for upgrade patch in demo it said couple of patch already exists so those update i skipped. Now when i check upd877654 has a step which imports the data in this table. my change assistant told that the update is already available in my demo so i skipped. Now i am not sure what to do.
I tried reimporting the data and running the analyzer again. But worried that there can be any issues due to this.

I need kernal upgrade on hp unix cluster ECC6 process step to step

Hello,
I need kernal upgrade procedure on hp unix cluster ECC6 in step to step
Please help me .
Regards
Mahesh

Hi,
If its a cluster or single instance, the procedure is the same.
As a thumb rule always execute the program RSPARAM from se38 and find the directory structure of the parameter DIR_CT_RUN.
The default value is generally /usr/sap/SID/SYS/exe/run
Download the SAPEXE<NO>.SAR and SAPEXEDB<no>.SAR and extract i in the above directory.
Before you do it make sure thats:
Stop the SAP R/3 resource in the cluster. Leave the SAP disk online.
Replace the Kernel
Start the instance
Replicate executables in the c:windowssapcluster or c:winntsapcluster (on both nodes)
You are done
Thanks Nirmal

Step by step procedure for Upgrade to ECC6.0

Hi,
I gained a lot from this forum . Can someone please mail me at
[email protected]
step by step procedure for upgrade .
Will award full points for helpful documents..
With regards,
Mrinal

SAP defined a roadmap for upgrade.
1) Project Preparation
Analyze the actual situation
Define the objectives
Create the project plan
Carry out organizational preparation for example identify the project team
2)Upgrade Blueprint
The system and components affected
The mapped business processes
The requirements regarding business data
3)Upgrade Realization -- In this phase the solution described in the design phase is implemented in a test environment. This creates a pilot system landscape, in which the processes and all their interfaces can be mapped individually and tested on the functional basis.
4)Final Preparation for Cutover -- Testing, Training, Minimizing upgrade risks, Detailed upgrade planning
5)Production Cutover and Support
The production solution upgrade
Startup of the solutions in the new release
Post processing activities
Solving typical problems during the initial operation phase.
SAP expects at least 2 to 3 months for Upgrade and that again depends on project scope and complexity and various other factors.
STEPS IN TECHNICAL UPGRADE
     Basis Team will do the prepare activities. (UNIX, BASIS, DBA).
     Developer need to run the Transaction SPDD which provides the details of SAP Standard Dictionary objects that have been modified by the client. Users need to take a decision to keep the changes or revert back to the SAP Standard Structure. More often decision is to keep the change. This is mandatory activity in upgrade and avoids data loses in new system.
     After completing SPDD transaction, we need to run SPAU Transaction to get the list of Standard SAP programs that have been modified. This activity can be done in phases even after the upgrade. Generally this will be done in same go so that your testing results are consistent and have more confident in upgrade.
     Run SPUMG Transaction for Unicode Conversion in non-Unicode system. SPUM4 in 4.6c.
     Then we need to move Z/Y Objects. Need to do Extended programming check, SQL trace, Unit testing, Integration testing, Final testing, Regression Testing, Acceptance Testing etc.,
The main Category of Objects that needs to be Upgraded is
     Includes
     Function Groups / Function Modules
     Programs / Reports
     OSS Notes
     SAP Repository Objects
     SAP Data Dictionary Objects
     Domains, Data Elements
     Tables, Structures and Views
     Module Pools, Sub Routine pools
     BDC Programs
     Print Programs
     SAP Scripts, Screens
     User Exits
Also refer to the links -
http://service.sap.com
http://solutionbrowser.erp.sap.fmpmedia.com/
http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
http://www.id.unizh.ch/dl/sw/sap/upgrade/Master_Guide_Enh_Package_2005_1.pdf
Hope this helps you.

Step by Step on Upgrade to OS X

I have 2 computers:
- iMac DV running 9.1 (320MB and no OS X)
- iBook running 9.2.2 (385 MB and it has OS 10.0)
I need to upgrade both to OS X. I have searched all over Apple's website and cannot find a simple step by step process to updgrade these computers and I don't even know which software or which if any memory to buy. Any help would be greatly appreciated. Thanks, LB :o)
iMac/iBook Mac OS 9.2.x

Hi lbunt,
first of all: WELCOME TO THE DISCUSSIONS!
Both your computers are compatible with Tiger. You should upgrade the memory though to at least 512 MB. Then upgrade the iMac to 9.2.1.
Make sure you buy the Tiger retail full install DVD: Mac OS X v10.4 "Tiger".
Insert the DVD into your drive and reboot while holding down the c-key. Then follow the onscreen instructions.

R12.0.6 Step by step guide for Upgrading OracleAS10g to 10.1.3.5 on AIX

Hi Friends;
I just want to share my new post entery on my blog which is related wiht OracleAs10g step by step guide(with screen shoots). I belive it will be helpful for users who can make this upgrade process...
Document prepared for R12.0.6 on AIX OS, but i belive it can show way to for other OS and R12.1.1 too.
PDF is avaliable at below link:
http://heliosguneserol.wordpress.com/2010/07/30/step-by-step-upgrading-oracle-oracleas10g-to-10-1-3-5-on-aix/
Regard
Helios

Hi Hussein Sawwan;
Thank you for your kind words,hope this pdf could be helpful for someone :)
Regard
Helios

Step by Step procedure of SAP upgrade + Oracle upgrade from 4.6C to ECC 6.0

Hi Chaps,
Could you please provide the step by step procedure of end to end SAP Upgrade which includes oracle database upgrade as well..and post upgrade process tooo....
Thanks
Keshav

There is nothing like that.
Each system is different, each application is different; on top of that it would be WAY too much to post here.
Get your upgrade guides:
http://service.sap.com/instguides
--> SAP Business Suite Applications
--> SAP ERP
-> SAP ERP 6.0
--> Upgrade
--> Upgrade Documentation - SAP ERP 6.0 SR3
Here choose your OS and platform and read all the notes. Be prepared to use a week just for technical preparation and documentation/notes checking before you even doubleclick on something.
For the Oracle Upgrade use
http://service.sap.com/instguides
--> Other Documentation
--> Database Upgrades
--> Oracle
Markus

Step by step upgrading exchange server 2010 standard to enterprise edition

step by step upgrading process exchange server 2010 standard to enterprise edition

Exchange standard and Enterprise edition have the same ISO image. it's just the license that you have to enter and corresponding features will be enabled. If you are planning to upgrade existing Exchange 2010 Standard to Exchange 2010 Enterprise then simply
apply the licenses of Enterprise edition. But if you want to upgrade to Exchange 2013 enterprise then install exchange 2013 in your environment and apply Exchange 2013 Enterprise edition licenses. Hope this answer your query. Thanks.
Kindly mark this as answer if found helpful. Thanks.
Regards, Riaz Javed Butt | Consultant Microsoft Professional Services MCITP, MCITP (Exchange), MCSE: Messaging, MCITP Office 365 | msexchgeek.wordpress.com

Backing up HD and Panther upgrading step by step request

new to forum, just want to ensure I do everything right..
I've had and used my iBook for 5 years now and I believe have been running 10.2.8 for the majority of that time.
I have the following items-
-iBook (meets requirements)
-WD My Book Pro edition 250GB
-Panther upgrade discs
and would like to do the following procedures-
-back my current HD onto the external drive (I do not want to lose my music,photos, and mail when I upgrade)
-upgrade to Panther
-use new OS with music, photos, and email intact
I've read through the discussions for tips, but I would appreciate a simplified step by step walk through if someone would be so nice... I have zero experience backing up, running disk repairs and permissions stuff, etc. so any steps that are helpful along the way are appreciated.
also I believe I need to format the WD My Book to run properly in 10.2.8 before I can backup HD prior to upgrading..? sound right..?
forgive any terminology mistakes.
thanks,
scott

scottyatown:
Welcome to Apple Discussions.
If I may expand on roam's very comprehensive response a bit, just by way of fleshing it out.
You said you have an external HDD, but you did say whether is was Firewire or USB or FW/USB. If you want to make a bootable clone you need firewire.
As roam indicated you will need to format and partition the HDD before you can clone to it. Dr. Smoke's FAQ Backup and Recovery has excellent advice on partitioning.Now to
Formatting, Partitioning Zeroing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
Boot from the install CD holding down the "C" key.
Select language
Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
Select your HDD (manufacturer ID) in left side bar.
Select Partition tab in main panel. (You are about to create a single partition volume.)
Select number of partition in pull-down menu above Volume diagram.
(Note: 1 partition is normally better for an internal HDD. External HDDs usually have more than one)
Type in name in Name field (usually Macintosh HD)
Select Volume Format as Mac OS Extended (Journaled)
Click Partition button at bottom of panel.
Select Erase tab
Select the a volume under Manufacturer ID (usually Macintosh HD).
Check to be sure your Volume Name and Volume Format are correct.
Select on Security Options button (Tiger) Options button (Panther & earlier).
Select Zero all data. (This process will map out bad blocks on your HDD. However, it could take several hours. If you want a quicker method, don't go to Security Options and just click the Erase button.)
Click OK.
Click Erase button
Quit Disk Utility.
Now your HDD is ready to accept your clone. Dr. Smoke has a preference for Retropect which I have found diffcult to use. SuperDuper will do an excellent job of making an exact backup of your HDD on the external drive.
Your computer is already connected to the external HDD.
Launch Super Duper
Select the Source (your iBook) and the Destination (external HDD)
Click copy, and confirm.
I notice that you list Panther upgrade disks. Hoeefully they are specific to your computer, or else there can be a problem. To install
Boot from you install disk holding down the "C" key.
When booted, select language.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in left side bar.
Select First Aid in main panel.
Click Repair Disk Permissions.
After Permissions are repaired Click Repair Disk.
Quit Disk Utility.
Open Installer and begin installation.
Installation option: Upgrade
Choose to Customize and deselect Foreign Language Translations and Additional Printer drivers.
Check box to install BSD Subsystems.
Proceed with installation.
After installation computer will restart for setup.
After setup, reboot computer.
Go to Applications > Utilities > Disk Utility.
Select your HDD (manufacturer ID) in left side bar.
Select First Aid in main panel.
Click Repair Disk Permissions.
Connect to Internet.
Download and install 10.3.9 Combo Update
Computer will restart after updates.
Go to Applications > Utilities > Disk Utility.
Select your HDD (manufacturer ID) in left side bar.
Select First Aid in main panel.
Click Repair Disk Permissions.
Please post back with questions, comments or an update on your progress.
Good luck.
cornelius
Message was edited by: cornelius

Satellite A100-912: How can I obtain a Toshiba step by step upgrade DVD

I bought a Satellite A100-912 (with XP installed). Now I'm upgrading to Vista Ultimate. I don't have the Toshiba Step By Step Upgrade DVD; so how can I obtain (or buy) a copy of the DVD?

I bought the notebook after the date (15 Mar 2007) for redeeming the express upgrade DVD for Vista from Toshiba. In this regards, I bought an origiona OEM Windows Vista Ultimate to upgrade from XP. I want to install the Toshiba Softeware that was bundled with notebook and works with Vista and thats why I want the upgrade DVD...

I have a canon hf10 and need to be able to transfer my video from my camera to my computer so I can burn them to dvd is there a step by step process? i'm new 2 the mac world. I tried downloading imovie 7.1.2 but it said, "An eligible iMovie application

i have a canon hf10 and need to be able to transfer my video from my camera to my computer so I can burn them to dvd is there a step by step process? i'm new 2 the mac world. I tried downloading imovie 7.1.2 but it said, "An eligible iMovie application was not found in the location /Applications." can anyone give me step by step instructions? i would hate to call the geek squad!!!LOL

and what's a firewire port? how do i know if i have one?

Help wanted - step by step process on how to use two ipods on one computer

I'm just in the process of getting an ipod (waiting on delivery!) and want to know how it is possible to have two ipods using the same computer but synchronizing differently. I don't want to risk losing my partners music (he'll be very upset!) and I don't want to end up with his music on my ipod. I'd appreciate it if someone could give me a step by step guide or tell me where the best place to look for the answer is. Is it possible somehow to have two different libraries on one computer? Is that how it works?

There are a couple of methods for using more than one iPod on a single computer. Have a look at the article linked below. Method one is to have two Mac or Windows user accounts which by definition would give you two completely separate libraries. Method two as Chris has already described above is to set your preferences so each iPod is updated with only certain playlists within one library. Have a look anyway and see what you think and go for whichever you feel suits your needs best: How To Use Multiple iPods with One Computer

Need to know how to get my apple account to sync up with a new email on my phone and delete the old one in a step by step process??

Need to know how to get my apple account to sync up with a new email on my phone and delete the old one in a step by step process??

After you change the account settings as I described below hold your finger on any app until they all wriggle, then tap the "-" on each purchased with her Apple ID. Press the HOME button when done. Then go to the App Store and buy or download the apps you want.

Step-by-step process of grouping Items in Category Sets and more accurately into the correct Category

Honestly, I have never had a customer ask me 'how' do I identify which Items go together in a specific category. I am thinking I start with the Functional Area (Inv, PO, OM, WM, etc..) attributes, and start the grouping there. The customer is asking for "best practices" - any input would be appreciated.
I have a fresh install of Oracle Inventory, Purchasing, Order Management, Service - We have 2,000,000 part numbers.
How have you instructed your customers/clients (both Internal and External) in the PROCESS of categorizing all of their Items?
What is the Step-by-step process of grouping those 2MM items into accurate Category Sets and more accurately into the most correct Category.
I would 'assume' it would start with some analysis with all the Items listed with all the item attributes, and start with ECCN (for example) or Item Type grouping. Then...(?)
Thanks!
rd

No answer to No.1 but I really want to find it out too.
No.2
If you already know list of the categories & ID you can manually create a list of checkboxes
<input type="checkbox" name="CAT_Category" value="89081" />
<input type="checkbox" name="CAT_Category" value="89082" />
<input type="checkbox" name="CAT_Category" value="89083" />
something like that should work

I upgraded from firefox 3.6 to 4.0. Now have to plug in all user name & passworgs to every website that asks me for it. Used to be automatic. Need a step by step to resolve it. Can you help ?

Upgrade from firefox 3.6 to 4.0.
Every website that have my username & password asks me for this info. before letting me in.
Need a step by step solution for this.
Thanks.

I, too had my book marks disappear when I upgraded to FF 4.0
I am now back and enjoying FF 3.6.17 (my original) yet I am still
without my book marks and am floundering trying to recoup.
Any help appreciated. If unable to see my book marks in the near
future I will definitely jump ship. It's too bad that FF people have
created this problem. I am mystified and disgusted with their actions.

Step by step process to upgrade EP 6.0 to EP 7.0

Similar Messages

Maybe you are looking for