Step by Step with with Import full in database infrastructure

Hello everybody.
I have a full export with SYS username (Database Infrastructure.- version 9204). I dont have physical Backup.
I need restore my database infrastructure.
I have a problem when imported in the new database (version 9204).
What are the steps to restore the database from an export full? It is possible?
Thanks for advance.

Completing a contract does not magically unlock the device.
Put the device in DFU mode (google it) and restore as new again. If it still will not unlock, send it back to your brother to sell to someone in the US that can use it on AT&T or take to Apple for evaluation.

Similar Messages

Is XSLT with import/include on database side supported?

Hi
I use server side (Oracle 10.2) XSL transformation (in particular DBMS_XSLPROCESSOR package) with source XML and XSLT files stored as XMLType columns. It works Ok. However I did not manage to get it working when importing spreadsheets into XSLT files like this:
<xsl:import href="generic-elem-to-csv.xslt"/>
Does Oracle database support Stylesheets with Include and Import to transform XML files on database side?
Thanks,
Vlad

Hi,
According to your post, my understanding is that you had problems to import the SharePoint SP1 environment site library to SharePoint SP2 environment.
Alex is right, now we could not import the site from the lower version to the earlier version directly since SharePoint 2010 SP2.
If you wanted to import the library to the new environment, you should first upgrade the SharePoint environment to the SP2, then export the library.
Now you can import the library without the issue.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Troubles with import huge twin databases to PowerPivot

Hi everyone,
I would be really greatful if someone could help me to solve the following problem:
we have monthly tables with data concerning deposits (each file is about 20-30 Mb and contains about 170 000 rows)/ there are such tables for each month from january 2012 till now on (each month new table appears). How can I create a united table, containing
all the data, in PowerPivot? Is copy-paste the only method? :-) (we also tried union quiery in PowerPivot when importing data, but it doesn't work with more than 2 tables, and unfortunately PowerPivor seems not to "see" union quieries in
Access.
Thanks for help!!

Hello,
You could use the free Power Query for Excel to merge several data sources or to append data to an existing sheet:
You can get it here:
Download Microsoft Power Query for Excel
Olaf Helper
[ Blog] [ Xing] [ MVP]

Issue with IMPORT/EXPORT to database INDX

There is an include program 'MMCP6F02' in which the user exit 'ZXSOPU11' is called and this happens soon after the below code which passes a table to INDX..
      EXPORT CE_SXYZ TO DATABASE INDX(BB) ID 'PDATA'
                         USING INDX_LIS_EXPORT4.
In the user exit, I am trying to read the above table entry with the following code
      IMPORT CE_SXYZ = IS_SXYZ_U FROM DATABASE
                       INDX(BB) ID 'PDATA'.
But this does not seem to fetch any data even though the declarations are the same. But when the same IMPORT is used again in the include program, right after the call to user-exit, it fetches the values.
IMPORT CE_SXYZ = IS_SXYZ_I FROM DATABASE
INDX(BB) ID 'PDATA'
USING INDX_LIS_IMPORT4.
Can someone please help me out to solve this issue?

I have an open OSS-Call at the Moment regarding this issue. SAP wants to make me believe that the coding in SAP Note 703770 would help, but it does not.

Unable to create routing step with reporting step null

We have scenario like not all the step in the Routing should be reported to SAP ECC at time of assembly component. YieldConfirmation should only be triggered for certain routing step.
1.Production order is downloaded from ECC to SAP ME via SAPMEINT by LOIPRO01 IDOC.
2. Added check like for certain cases only Routing step should have reporting step.
Getting null pointer exception when Production order IDOC is coming from ECC to SAP ME.

Not sure about what "2. Added check like for certain cases only Routing step should have reporting step" means.
All routing steps that come from ERP must have Reporting Step.
If you need to have only one ERP Reporting Step, you can import LOIPRO with a one-step routing without auto-release of the order, then update the routing in Routing Maintenance of SAP ME to add whatever steps you need before and after this ERP routing step, and then release the order. Then all component assembled before the reporting step will be confirmed to ERP when you complete this step.
As alternative, you can update the ERP routing via XLST of SAPMEINT to include non-ERP (ME-specific) steps.

BPM SEND step with Acknowledgemnt.Process logic depends on Application Ack.

Hi,
I am designing one BPM process in which I want to send IDOC to R/3.This IDOC will be processed by the R/3 system using process code.
Now I have sent this IDOC to R/3 through send step with application acknowledgment and only if acknowledgment comes then only next processing logic of the BPM process should be executed.
How should I design SEND step because the communication is asynchronous but I want the processing depending on acknowledgement only?
Please guide me.

Hi,
Take a look at this doc,
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe">How to handle Idoc Acks'</a>
Regards,
Bhavesh

How to Use Step with Filters in Eclipse

Hello, everyone!
I have a question. How do I keep myself from accessing methods outside my own class? See, when I use the debug feature of Eclipse, (I am using Eclipse 3.0), and start debugging, I often "Step Into" methods of classes like String.class and the like. Doing so produces errors that I need to click on to for numerous times! =( It hinders me from doing what I want to do. Can anyone help me? How do I prevent Eclipse from doing that again? After all, my only concern is seeing the methods I wrote in action, and I don't really want to bother with the ones already defined in Java (like Integer.Class and such).
I also did a search on google, but the sites that turned up are only those that say Use Step with Filters, and nothing specific (most of them are copy-pastes, so different sites end up saying exactly the same thing ). I did that already, and the same thing happens. What do I have to do in
Window->Preferences->Java->Debug? Do I have to add packages, classes or filters? If so, how should I do it?
Sorry for the long entry, but I'm getting frustrated with clicking on the errors... I hope someone can help me. =)
Thanks in advance! =D

Go to Window-Preferences-Java-Debug-Step Filtering. When the dialog opens, press F1 for help. Good luck!

BPM Send Step with acknowledgment: ID: sender agreement?

Hello everybody,
I have a send step in BPM and I expect a acknowledgement from the receiver.
Do I have to configure a sender agreement?
Thanks a lot
Regards Mario

mario,
I have tried to use a Sen Synchronous Step to a JDBC adapter from a BPM and it works fine.
<i>After changing the send step in BPM from async to sync with acknowledgement, I get not response message</i>.
When you select MODE as SEND SYNCHRONOUS in your Send Step, there is no option to Select ACKNOWLEDGEMENT.
When you select the MODE as SEND ASYNCHRNOUS , you can have acknowledgements.
But, as you are using a RECEIVER JDBC adapter , you need to have a SEND SYNCHRNOUS step that will get the response back from the JDBC adapter. This response will double up as Acknowledgemet.
You can surround this Send Synchrnous Step with an Exceptuion Handler to handle any exception that might occur.
Regards,
Bhavesh

Send step with TRANSPORT Ack. fails in BPE after default client change

Hi all,
I had to change default client in my PI (7.0 sps 13) system from 001 to xxx. I did it according to note 940309.
After this some probelms appears, for example my IPs becomes unworked and I have to repeat automatic customizing for BPE and re-activate in cache my IPs.
But some of them sill doesn't work. I found that this IPs fails on send steps with transport acknowledgements. When I switch off transport ack. in send step, it become works fine.
Please provide me with some solution, because I need transport ack. in my IPs.
Maxim.

Additional info:
BPE monitoring shows that send step fails with errors:
EXECUTE_METHOD_OBJECT_SYNC
Work item 000000057118: Object CL_SWF_XI_SRV_SEND_ASYNCHRON method SEND_ASYNCHRON cannot be executed
Maxim.

TS1372 I have an ipod classic 160gb have already tried all the steps with no success. I have just bought this ipod and have had it for less than a week before this happened. what is wrong with my ipod and how can i fix it?

brand new ipod classic 160gb will not restore. have tried all steps with no fix. Also tried steps on a different computer with same results. anu help?

if you own a mac try to re format the disc to journal.
If you are on a windows like me, try to reformat the disc to NTFS. Then it will display that you need to restore as the ipod is in recovery mode. It restored with success. and voila, brand new working ipod.

HT201263 I forgot my lock screen password. When I try the step with USB cable with computer. It doesn't work. My picture didn't get detectede

Sir, I forgot my lock screen password. And now my iPad is didisabled. I've tried the steps with using usb cable, but it doesn't work. The device wont detected. Please help me. Because i've no idea to fix it

Irmansaras wrote:
... I've tried the steps with using usb cable, but it doesn't work. The device wont detected. ..
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

Fill the 'Objects and Attachments ' in Decision step with milestone detils

My requirement is to fill the 'Objects and Attachments ' in Decision step with a display milestone details as seen in cj20n transactiobn.
I am using business object MLST_NETW but display method does not show detsils of milestone .
is there any other way i could possibly show th emilestone detsils as seen in cj20n transction.

Yes th ebinding is correctly done when I chcek in SBWP for that item it displays the link with the milestone no and when i cleck on the link it asks me the milstone no also but it does not display any detils of milestone or does not navigate to th emilestone page.
I tried testing the display method of the stnadard business object MLST_NETW independly but i see even here the milestone detils page not appearing .Is there some other bO which has to be used or some way through which i colud navigate to the milestone detsils page transaction is CJ20n

Decision step with attachment

hi
my issue is i have kept a decision step where , i need to send decision step with attachment , i have done binding in the control tab ,of decision step like this
& absence& --> &_ATTACH_OBJECTS&
my attachemnet should be absence object.
when i execute , i 'm getting the decision workitem but with
no attachment , would u help on this .

Hi,
Make sure you have &ABSENCE& object is instantiated in any one of the steps before to youe decision step.
In Workflow Log, check the container elements and see if Adhoc_Objects container element value getting filled or not on your user decision step? If it is not having any values and if your binding is correct, then i am sure &ABSENCE& object is not instantiated before. Check !!
Regards
Krishna Mohan

Filter steps with empty results from report

Hi,
At the moment, my result filtering expression is Result.Status != "Done" && Result.Status != "Skipped", so it removes all steps which are only "Done" or "Skipped". With my current filtering expression, any step with the "Done" status will not be displayed in the report even if there are "Additional Results". I would like to improve this by filtering only if there is not result.
This means that I would like to log in the report any step which returns a value including values added in "Additional Results".
Is there any way to achieve this ? I've been looking in the RunState but I was not able to find there the additional results are stored.
Thanks !
Alex

You can also check if AdditionalResults is empty or not:
GetNumElements(Result.AdditionalResults) > 0
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

How to implement Multiple Roadmap step with in a roadMap

Hi,
I am trying to implement Multiple roadmap step with in a roadMap.Can any one help me on this how to do it.
As of now i have added Multiple roadmap step element with in my Road map navigation and assign a data source which contains single attribute steps. I am stuck here open question like
1) How i map the view accordingly with the steps that are dynamically created
2) Weather i have to create dynamic plugs? to handle it
Can any one help me out or if you have any sample implementation please guide me through that link.
Thanks in advance.
Regards,
Karthikeyan R

Hi,
1. In the View add a RoadMapUI element.
2. Right click->Insert Steps (as many as required)
3. Set the design property of the Roadmap step as standard / selected (Highlighted if set to "Selected")
This is for a static approach i.e if there are 3 views, then in all the three views u repeat the procedure above and set the property as Selected for the required step.
For dynamic selection of roadmap, bind the design property to context attribute of type WDRoadMapDesign and set the property thru code.
Hope this helps you.
Regards,
Poojith MV

Step by Step with with Import full in database infrastructure

Similar Messages

Maybe you are looking for