Step for Upgrade iOS5 on iPad2

Hi, i'm still newbies using iPAD2 and also iOS operating system. From my recently seacrh in discussion, a lot of top discuss is about losing some data when start doing upgrading. So, i need who expert in this forum to help me to mention the important step to do upgrade iOS5 on iPad2. Can i update directly using iPad2 inernet connection? or need mac using itune?
Thanks

No, you connect the iPad to the computer, open iTunes, select your iPad's list item in the sidebar, click on the Summary tab in the iTunes' main window then click on the Update button. Before you do that, however, be sure to sync your iPad so that iTunes will make a current backup. Upgrading will completely wipe the iPad. After the new OS is installed you will have an option to restore from a current backup. This will then re-install whatever had been installed prior to upgrading the OS.
The procedure is the same for your iPhone.

Similar Messages

Steps for upgrading kernel (ABAP+JAVA)

Hi All,
Could you pls let me know the steps required for upgrading kernel (ABAPJAVA). For ABAP I know the steps but I am confused about (ABAPJAVA) Instance.Recently we faced issues regarding startup of java server after upgrading ABAP stack .
Regards,
Prashant

This question has been asked gazillion of times.... did you do a search before posting?.... obviously not.
Use the Search in the top-right side of the page. You'll be amazed with the amount of info available.
Regards
Juan

Steps for upgrade to GRC 5.3

HI Folks,
I would really appreciate if I can know the steps for GRC upgarde to 5.3 from 5.2. The only components we use are CC and firefighter.
Is there any need to backup anything before the upgrade except the database and filesystem?
Regards,

Hi,
Check this upgrade guide at service marketplace, might be useful to you-
https://websmp103.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000718186&
Goto SAP GRC Access Control 5.3-Upgrade Guide - SAP GRC Access Control 5.3
Regards,
Sabita

What are the steps for upgrading os x 10.5.8 to 10.6.7

I'm thinking of upgrading from 10.5.8 to 10.6.x. Can I just install over the top of 10.5.8 or do I need to do something beforehand? Do I just insert the disk and run?
Much obliged.

How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger and later.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the backup or destination volume from the left side list.
Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
Click on the Restore tab in the DU main window.
Select the backup or destination volume from the left side list and drag it to the Destination entry field.
Select the startup or source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
C. Important: Please read before installing
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. Download and install update(s) if updating:
Use Software Update, or
Download standalone updater(s).
E. To upgrade from an earlier major version:
Purchase the requisite installer package (Snow Leopard for example.)
Boot from the installer DVD.
Choose the install option:
None required for Snow Leopard.
Archive and Install for versions prior to Snow Leopard.

AGENT steps for Upgrading a database to new release

I have a 9.2.0.6 database that needs upgrading to 9.2.0.7. The OMA is 10.2.0.2. Are there any special steps required in the upgrade to the database and listener for the OMA? The ORACLE_HOME and TNS_ADMIN will be changing to reflect the new software. I know that the $AGENT_HOME/sysman/emd/targets.xml has references to the oracle db version.

Install base release, Install patchset, Install
one-off's required.
${ORACLE_BASE}/product/9.2.0.7OK. How cost effective is it to go through all that for every Server and Database in an organisation? BTW. How many Servers and Databases do you have in your Organisation?
The install can occur at anytime while the system is
up, So all that is needed is the migration of the
database from the ${ORACLE_BASE}/product/9.2.0.6 home
to the new home - and one-offs. Again, how do you measure this in terms of cost (resource, Infrastrucure, Time, money to do)? I will do this only if there is requirement for Parallel run of both(e.g. for an environment supporting both component releases). Else, all I need is backup 9206 server and databases to backup media and upgrade to 9207.
This greatly reduces our downtime and provides fall back if necessary.The difference in down time here is the time you will use to run the installer for binaries (whch takes the least amount of time). You still need the downtime to copy and upgrade the database after you have gone through that long process. And depending on the number of patchsets, CPUs, one-offs that has been applied to 9206, you are spending hours upgrading from 9206 to 9207.
I am concerned that a simple "Component Release" upgrade will require a lot of resource, Infrastrucure, Time, money to do. What will you do if you are managing databases for 10 different projects made up of 50 Oracle Server Installations, each with 4 Database Environments (Dev, SysTest, CAT and Prod = 200 Databases) and on four different platforms with some housing Terabytes of data. Personally, the process you go through for a Component Release will cost me unnecessary thousands of pounds. So, I will do what you do for only Major Release (e.g 9.2 to 10.1). If it is "really" necessary, I will do it for a Maintenance Release (9.1 to 9.2), but not a Component Release (9.2.0.6 to 9.2.0.7)

Steps for upgrading 2005B to 2007B

Hi
I am not able to upgrade 2005 B to 2007 B.
Can u give me step by step instructions which is helpful for updating the B1.
Thanks

Hi Pari,
the IRU (Internal Reconciliation Upgrade) happens when you upgrade to version 2007. Reason being the completely redisigned & merged reconciliation engines.
SAP developed & made the pre-upgrade tools for the A & B versions available, such that partners can test the potential impact of the historically existing reconciliation inconsistencies in their customers' databases. Thus, no partner is unprepared when upgrading the live system & is then also familiar with & comfortable in explaining to the customer how SAP Business One automatically created journals with a balance due that have to be reconciled.
All information on the [IRU landing page|https://websmp108.sap-ag.de/~sapidb/011000358700000380562007E] is relevant for all partners whose customers are upgrading to 2007.
Please note that further information regarding any Upgrades of SAP Business One can be found within the Accelerated Upgrade Program (B1AUP).
This is a comprehensive upgrade methodology created by SAP with the help and input of certain partners.
Please refer to http://service.sap.com/smb/sbo -> expand 'A-Z Index' and click on 'A-Z Snapshot'. Under topic 'A-C' click on Accelerated Upgrade Program (B1AUP)
hope it helps,
Regards,
Ladislav
SAP Business One Forum Team

Step for upgrade 2.1.00039 to 3.01?

Hi all,
When I was upgrade apex 2.1.00.00.39 to 3.01 I was trying to make input data for
(from command line, from prompt from RUN DATABASE, with sqlplus.exe running)
coreins.sql(@c:\apex\coreins)
>
1> log.log
2> 2
3> XE
4> c:\TEMP
5> i .........or path?
6> XE .........or other?
7> SYSTEM ...same as SYS or ?
8> REPUBLICA ...pass from instalation apex ver 2.0 or?
9> c:\apex\ path fro apex directory or?
and apexins.sql
1> password
2> SYSTEM ..... or ?
3> SYSTEM
4> c:\TEMP .... path?
5> i ......?
Any explanation of upgrade APEX 2.1.00.0 39 >> APEX 3.01 would be
very helpfull, thanks in advice Gordan

I found that the end of apexins.sql should be change path where is coreins>>
set define '^'
set concat on
set concat .
set verify off
set termout off
spool off
set termout on
column foo3 new_val LOG1
select 'install'||to_char(sysdate,'YYYY-MM-DD_HH24-MI-SS')||'.log' foo3 from dual;
define LOG2 = ^LOG1.english.log
define LOG3 = ^LOG1.english.bad
spool ^LOG1
define UPGRADE = '2'
define INSTALL_TYPE = 'MANUAL'
define APPUN = 'FLOWS_030000'
define ADM_PWD = '^1'
column foo2 new_val UPGRADE
select '2' foo2 from dba_users where (username in ('FLOWS_020200','FLOWS_020100','FLOWS_020000','FLOWS_010600','FLOWS_010500')) and rownum = 1;
define DATTS = '^2'
define FF_TBLS = '^3'
define TEMPTBL = '^4'
define IMGPR = '^5'
define DB_VERSION = '10'
define PREFIX = '@c:\APEX_HOME\apex\'
@c:\APEX_HOME\apex\coreins.sql ^LOG1 ^UPGRADE ^APPUN ^TEMPTBL ^IMGPR ^DATTS ^FF_TBLS ^ADM_PWD ^PREFIX
exit

What are the steps to upgrade oracle clusterware from 10.2.0.4 to 11.2.0.2.

We have two node clusterware installed and we want to upgrade the oracle clusterware from 10.2.0.4 to 11.2.0.2 can any one share the steps for upgrade.
Regards
Naveen Dutt

Hi Rajeys,
I read all the documents but i was not able to find the information that i was looking. Below i am providing my cluster node configuration and version -
1) No of Node in cluster - 2 (node1 ,node2)
2) OCR (clusterware) version - 10.2.0.4
3) Storage type - NAS storage (we are not using ASM).
Now link provided by you is to upgrade ASM from 10.2.0.3 to 11GR2 but we are not using ASM as storage we are using NAS storage. Do we have any link or document that help me to upgrade oracle clusterware only without ASM from version 10.2.0.4 to 11.2.0.2 .
Thanks in advance
Regards
Naveen Dutt

Just upgraded to iOS5 on ipad2 and now have all my old emails to delete. Is there a way to select all like in trash and then delete all?

just upgraded to iOS5 on ipad2 and now have all my old emails to delete. Is there a way to select all like in trash and then delete all?

Thanks for the feedback, the question is that it will syn all the folders that I have checked, and its total up to 6000 photos which was taking me one whole day to syn. I am seeking is there away that what have already in my Iphone will not be delected if I did not checked on the next syn, and only add in the new album that was checked.

I am trying to upgrade EPM 8.9(8.49.23) to EPM 9.1 (8.53.08). During dataconversion step the AE process finished succssfully in few seconds. When i see the log it says "There are no conversions to run for upgrade path PF89 (18028,10003)". Please let me kn

I am trying to upgrade EPM 8.9(8.49.23) to EPM 9.1 (8.53.08). During dataconversion step the AE process finished succssfully in few seconds. When i see the log it says "There are no conversions to run for upgrade path PF89 (18028,10003)". Please let me know why it didnt do any conversion. Am i missing something?

yes, that app engine didnt inserted any rows. So now when i tried to drill down i found that there was no data in the "new demo" database on table UPG_DATACONV. That is the reason for all this.
When i applied required for upgrade patch in demo it said couple of patch already exists so those update i skipped. Now when i check upd877654 has a step which imports the data in this table. my change assistant told that the update is already available in my demo so i skipped. Now i am not sure what to do.
I tried reimporting the data and running the analyzer again. But worried that there can be any issues due to this.

Post upgrade step for EP

HI Friends,
I have upgraded my EP from 6.0 to 7.0 successful with all component. ALos i am getting login screen. SO what are post upgrade step for EP.
Thanks,
Regards,
Sachin

HI ,
System restart
run the SICK verify the installation check
Check developer traces on the operating system. Log on to
Check the installed license and profile configuration (RZ10 and PFCG)
confirm the operation modes
Perform a client copy
Check the status of the SAP Web AS Java and the user SAPJSF
Check the rdisp/j2ee_start profile parameter
Check the current state of SAP Web AS Java using transaction SMICM
SAP Load Generator
Start SAP Load Generator (SGEN)
Regards,

Step by step procedure for Upgrade to ECC6.0

Hi,
I gained a lot from this forum . Can someone please mail me at
[email protected]
step by step procedure for upgrade .
Will award full points for helpful documents..
With regards,
Mrinal

SAP defined a roadmap for upgrade.
1) Project Preparation
Analyze the actual situation
Define the objectives
Create the project plan
Carry out organizational preparation for example identify the project team
2)Upgrade Blueprint
The system and components affected
The mapped business processes
The requirements regarding business data
3)Upgrade Realization -- In this phase the solution described in the design phase is implemented in a test environment. This creates a pilot system landscape, in which the processes and all their interfaces can be mapped individually and tested on the functional basis.
4)Final Preparation for Cutover -- Testing, Training, Minimizing upgrade risks, Detailed upgrade planning
5)Production Cutover and Support
The production solution upgrade
Startup of the solutions in the new release
Post processing activities
Solving typical problems during the initial operation phase.
SAP expects at least 2 to 3 months for Upgrade and that again depends on project scope and complexity and various other factors.
STEPS IN TECHNICAL UPGRADE
     Basis Team will do the prepare activities. (UNIX, BASIS, DBA).
     Developer need to run the Transaction SPDD which provides the details of SAP Standard Dictionary objects that have been modified by the client. Users need to take a decision to keep the changes or revert back to the SAP Standard Structure. More often decision is to keep the change. This is mandatory activity in upgrade and avoids data loses in new system.
     After completing SPDD transaction, we need to run SPAU Transaction to get the list of Standard SAP programs that have been modified. This activity can be done in phases even after the upgrade. Generally this will be done in same go so that your testing results are consistent and have more confident in upgrade.
     Run SPUMG Transaction for Unicode Conversion in non-Unicode system. SPUM4 in 4.6c.
     Then we need to move Z/Y Objects. Need to do Extended programming check, SQL trace, Unit testing, Integration testing, Final testing, Regression Testing, Acceptance Testing etc.,
The main Category of Objects that needs to be Upgraded is
     Includes
     Function Groups / Function Modules
     Programs / Reports
     OSS Notes
     SAP Repository Objects
     SAP Data Dictionary Objects
     Domains, Data Elements
     Tables, Structures and Views
     Module Pools, Sub Routine pools
     BDC Programs
     Print Programs
     SAP Scripts, Screens
     User Exits
Also refer to the links -
http://service.sap.com
http://solutionbrowser.erp.sap.fmpmedia.com/
http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
http://www.id.unizh.ch/dl/sw/sap/upgrade/Master_Guide_Enh_Package_2005_1.pdf
Hope this helps you.

TS1314 can you write the steps for transferring photos from my pc to ipad2

Can you please write down the steps for transferring photos from my PC to IPAD2?

Sync photos to iPad
http://support.apple.com/kb/HT4236

I fail to upgrade to ios5 my ipad2.

I fail to upgrade to ios5 my ipad2. After uploading its written - too much time without connection. Mistake 3529. What's up? Please help!

Try temporarily turning off your firewall and antivirus software until the download has completed.

How can I upgrade iOS5 into my iPAD2 without sync anything into my PC since not enough hard drive space in my PC., How can I upgrade iOS5 into my iPAD2 without sync anything into my PC since not enough hard drive space in my PC.

How can I upgrade iOS5 into my iPAD2 without sync anything into my PC since my PC not enough hard drive space.

You'll have to delete sufficient GBs from your HD or transfer GBs to a second HD to free up sufficient space.
Also look at these links.
Windows - Change iPad default backup location
http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
Windows - Changing IPhone and iPad backup location
http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
 Cheers, Tom

Step for Upgrade iOS5 on iPad2

Similar Messages

Maybe you are looking for